Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C.-Y. Liu and Y. S. Wong, “Design and Implementation the LLC Resonant Transformer”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO016, pp. 3370-3372.
[n] S. Holm and P.-U. Renberg, “Magnetic Field Design for a Combined Fixed Frequency and Frequency Modulated Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-14, pp. 2012-2015.
[n] E. I. Zagorodnikov et al., “COMISSIONING OF THE LINEAR ACCELERATOR-INJECTOR OF TNK FACILITY”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUDP04, pp. XX-XX.
[n] V. Leonov and V. Ushkov, “MEASUREMENT OF SIBERIA-1 BEAM LIFETIME BY THE DECAY RATE PLOT METHOD”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUDP01, pp. XX-XX.
[n] K. N. Chernov et al., “WAVEGUIDE CHANNEL FOR TNK LINEAR ACCELERATOR ÔÇô INJECTOR”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUDP05, pp. XX-XX.
[n] S. Holm and P.-U. Renberg, “Initial Operation of the Reconstructed Uppsala Synchrocyclotron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 353-356.
[n] A. Valentinov, L. Ioudin, I. Krylov, V. Rezvov, and I. Yupinov, “LOCAL FEEDBACK SYSTEM TO CORRECT SYNCHROTRON RADIATION BEAM POSITION AT SIBERIA-2 STORAGE RING”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUDP08, pp. XX-XX.
[n] J. Chavanne and G. Le Bec, “Prospects for the use of Permanent Magnets in Future Accelerator Facilities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 968-973. doi:10.18429/JACoW-IPAC2014-TUZB01
[n] A. Dolinskii, C. Dimopoulou, O. E. Gorda, S. A. Litvinov, F. Nolden, and M. Steck, “Beam Test of Slow Extraction from the ESR”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC056, pp. 2142-2144.
[n] Y. S. Wong, K.-B. Liu, and W. S. Wen, “External Energy Dump for Superconducting Magnet of the Uni-polar Power System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO015, pp. 3367-3369.
[n] I. N. Okunev et al., “Ramped Magnetic Measurement of NSLS-II Booster Dipoles”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME031, pp. 3576-3578.
[n] O. E. Gorda, C. Dimopoulou, A. Dolinskii, S. A. Litvinov, F. Nolden, and M. Steck, “Field Properties of the ESR Magnets and their Influence on Beam Optics”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC058, pp. 2148-2150.
[n] M. Gangeluk et al., “Acoustic Experimental Studies of High Power Modes in Accelerating Structure of Kurchatov SR Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR13, pp. 1815-1817.
[n] J. C. Brutus et al., “Mechanical Design of the 704 MHz 5-cell SRF Cavity Cold Mass for CeC PoP Experiment”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2678-2680. doi:10.18429/JACoW-IPAC2014-WEPRI081
[n] A. Sharma et al., “Design and testing of a universal embedded feedback controller for RF cavities”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6698, unpublished.
[n] O. Matveeva, S. Pesterev, L. Sevryukova, and D. Filippov, “The Influence of Specially Created Oxide Films on the Emission Properties of Niobium”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C30, pp. 675-684.
[n] T. Hattori, T. Fukushima, H. Muto, H. Suzuki, and N. Ueda, “Development of a New IHQ Linac (Construction and Acceleration of a 2 MeV Prototype Linac)”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 944-947.
[n] F. Nolden et al., “Radioactive Beam Accumulation for a Storage Ring Experiment with an Internal Target”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA013, pp. 91-93.
[n] M. Tischer et al., “Damping Wigglers for the PETRA III Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE036, pp. 2446-2448.
[n] K. Haga et al., “The Vibration Measurements at the Photon Factory Storage Ring Building”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4A11, pp. 2388-2390.
[n] I. N. Okunev et al., “Magnetic Measurement of the NSLS-II Booster Dipole with Combine Functions”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME032, pp. 3579-3581.
[n] S. Kullander, S. Holm, B. Johansson, and A. Tidriks, “Proposal for a Sector-Focusing Synchro-Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper D-004, pp. XX-XX.
[n] A. Dolinskyy et al., “Orbit Correction System at the Collector Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO006, pp. 1886-1888.
[n] G. Le Bec, J. Chavanne, and P. N, “Shape Optimization for the ESRF II Magnets”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1232-1234. doi:10.18429/JACoW-IPAC2014-TUPRO082
[n] M. Bender, W. A. Assmann, and H. Kollmus, “Understanding of Ion Induced Desorption Using the ERDA Technique”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH173, pp. 1423-1425.
[n] H. Homeyer, “ISL-Berlin, an Ion Beam Laboratory for Applications”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper B-09, pp. 70-73.
[n] A. Filipchenko et al., “SIBERIA-2: Work in Progress”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP007G, pp. 608-610.
[n] B. Martin et al., “A New Injector Concept: The RFQ-Cyclotron Combination at ISL-Berlin”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper B-11, pp. 78-81.
[n] P. A. Görgen, O. Boine-Frankenheim, S. Appel, C. Dimopoulou, S. A. Litvinov, and M. Steck, “Experimental Studies of Beam Loss during Low Energy Operation with Electron Cooled Heavy Ions in the ESR”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS001, pp. 3424-3426.
[n] J. C. Huang, K.-B. Liu, and Y. S. Wong, “Zero Voltage Switching of Two-switch Flyback-Forward Converter”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD063, pp. 3656-3658.
[n] H.-E. Mahnke, “Invited Paper: Application of Heavy Ion Beams to Condensed Matter Studies”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper J-07, pp. 587-593.
[n] V. M. Panasyuk et al., “The Magnetic System of Electron Coolers of Collider NICA”, in Proc. COOL'19, Novosibirsk, Russia, Sep. 2019, pp. 112-115. doi:10.18429/JACoW-COOL2019-TUPS15
[n] A. Franchi, J. Chavanne, F. Ewald, L. Farvacque, T. P. Perron, and K. B. Scheidt, “Vertical Emittance Reduction and Preservation at the ESRF Electron Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUODA01, pp. 928-930.
[n] C. Egelhaaf, D. Erdmann, H. Homeyer, and W-D. Zeitz, “The VICKSI Beam Line Instrumentation and Control System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1745-1748.
[n] M. Kumagai, “Computer Method for the Analysis of Axisymmetrical Magnetic Fields for an Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 845-848.
[n] J. C. Huang, K.-B. Liu, and Y. S. Wong, “Improvement of Output Current Characteristics for Bira MCOR30 Correction Magnet Power Supply”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO017, pp. 3373-3375.
[n] V. Korchuganov et al., “Status of the Siberia-2 Preinjector”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 739-742.
[n] J. Milburn, R. Caylor, J. Porter, R. Reimers, and J. Tanabe, “Design of a Three-Channel Septum Magnet”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3646-3648.
[n] Y. S. Wong, J. C. Huang, K.-B. Liu, and W. S. Wen, “High Precision Programmable of TPS Quadrupole Magnet Power Supply”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD066, pp. 3662-3664.
[n] H. Homeyer, “STATUS OF ISL”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20C5, pp. XX-XX.
[n] G. M. Wang, R. P. Fliller, I. Pinayev, and T. V. Shaftan, “SVD-BASED METHOD FOR MEASUREMENT OF BEAM PARAMETERS AND FLAG RESOLUTION”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR092, pp. 999-1001.
[n] K. Abbasa, “DEVELOPMENTS IN ALPHA EMITTING RADIOISOTOPE PRODUCTION AT THE JOINT RESEARCH CENTRE (JRC) OF THE EUROPEAN COMMISSION”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P08, pp. XX-XX.
[n] F. T. Kuchnir, L. S. Skaggs, A. J. Elwyn, F. P. Mooring, and N. A. Frigerio, “Design of a Neutron Therapy Facility for a 30-inch Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 638-646.
[n] A. Tuzikov et al., “Heavy Ion Injection Chain of NICA Collider”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 52-54. doi:10.18429/JACoW-RUPAC2018-TUCDMH01
[n] O. A. Kovalenko, A. Dolinskyy, O. E. Gorda, and S. A. Litvinov, “Orbit Response Matrix Analysis for FAIR Storage Rings”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3219-3221. doi:10.18429/JACoW-IPAC2016-THPMB003
[n] B. S. Wang, K.-B. Liu, and Y. S. Wong, “N+1 Redundancy Power Supply System by Paralleling Current Converter Modules with Digital Regulation Control”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO018, pp. 3376-3378.
[n] S. Holm, “Factors Affecting Beam Intensity and Quality in Synchrocyclotrons”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69H07, pp. XX-XX.
[n] A. Filipchenko et al., “Beam Energy Ramping at SIBERIA-2”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP095G, pp. 1426-1428.
[n] I. N. Okunev, A. Bogomyagkov, E. B. Levichev, P. A. Piminov, S. V. Sinyatkin, and P. Vobly, “Final Focus for the Crab-waist Tau-charm Factory”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP046, pp. 2623-2625.
[n] K. Satou et al., “Development of a Beam Induced Heat-Flow Monitor for the Beam Dump of the J-PARC RCS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN047, pp. 4084-4086.
[n] M. Bieler, S. Choroba, J. Hameister, I. Kazarezov, and V. Leonov, “Final Report on Hard Tube Pulser Activities at DESY”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP54C, pp. 2269-2271.
[n] A. L. Romanov et al., “CORRECTING THE ROUND BEAM LATTICE OF VEPP-2000 COLLIDER USING ORBIT RESPONSE TECHNIQUE”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH27, pp. XX-XX.
[n] V. Velthaus, M. Bender, and C. Trautmann, “Surface Treatment Procedures to Mitigate Ion-Induced Desorption in Heavy Ion Accelerators”, presented at the HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, paper TU1C2, unpublished.
[n] J. Kamiya et al., “Measurement of the Extraction Kicker System in J-PARC RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS110, pp. 1759-1761.
[n] M. Tischer et al., “Status of the PETRA III Damping Wigglers”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS121, pp. 3565-3567.
[n] S. Holm, “Status Report on the Gustaf Werner Cyclotron in Uppsala”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-22, pp. 106-109.
[n] A. Artiomov, “The Potentialities of H- beam Diagnositics by Detached Particles”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP047L, pp. 1654-1656.
[n] J. Porter, “Cryogenic System for a Superconducting Spectrometer”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2909-2911.
[n] T. Takayanagi et al., “Experimental Results of the Shift Bump Magnet in the J-PARC 3-GeV RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS111, pp. 1762-1764.
[n] P. J. Spiller, K. Blasche, P. H??lsmann, A. Kraemer, H. Ramakers, and H. R. Sprenger, “High Intensity Uranium Operation in SIS18”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT020, pp. 1180-1182.
[n] A. J. Jason, “Linac-Driven Spallation-Neutron Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAE02, pp. 1183-1187.
[n] T. Toyama, Y. Hashimoto, J. Kamiya, E. Nakamura, Y. Shirakabe, and Y. Shobuda, “Coupling impedance of the J-PARC kicker magnets”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUBX03, pp. 140-142.
For LaTeX
Use Complete Form
For BibTeX
References
- C.-Y. Liu and Y. S. Wong, “Design and Implementation the LLC Resonant Transformer”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO016, pp. 3370-3372.
- S. Holm and P.-U. Renberg, “Magnetic Field Design for a Combined Fixed Frequency and Frequency Modulated Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper B-14, pp. 2012-2015.
- E. I. Zagorodnikov et al., “COMISSIONING OF THE LINEAR ACCELERATOR-INJECTOR OF TNK FACILITY”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUDP04, pp. XX-XX.
- V. Leonov and V. Ushkov, “MEASUREMENT OF SIBERIA-1 BEAM LIFETIME BY THE DECAY RATE PLOT METHOD”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUDP01, pp. XX-XX.
- K. N. Chernov et al., “WAVEGUIDE CHANNEL FOR TNK LINEAR ACCELERATOR ÔÇô INJECTOR”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUDP05, pp. XX-XX.
- S. Holm and P.-U. Renberg, “Initial Operation of the Reconstructed Uppsala Synchrocyclotron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 353-356.
- A. Valentinov, L. Ioudin, I. Krylov, V. Rezvov, and I. Yupinov, “LOCAL FEEDBACK SYSTEM TO CORRECT SYNCHROTRON RADIATION BEAM POSITION AT SIBERIA-2 STORAGE RING”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUDP08, pp. XX-XX.
- J. Chavanne and G. Le Bec, “Prospects for the use of Permanent Magnets in Future Accelerator Facilities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 968-973.
- A. Dolinskii, C. Dimopoulou, O. E. Gorda, S. A. Litvinov, F. Nolden, and M. Steck, “Beam Test of Slow Extraction from the ESR”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC056, pp. 2142-2144.
- Y. S. Wong, K.-B. Liu, and W. S. Wen, “External Energy Dump for Superconducting Magnet of the Uni-polar Power System”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO015, pp. 3367-3369.
- I. N. Okunev et al., “Ramped Magnetic Measurement of NSLS-II Booster Dipoles”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME031, pp. 3576-3578.
- O. E. Gorda, C. Dimopoulou, A. Dolinskii, S. A. Litvinov, F. Nolden, and M. Steck, “Field Properties of the ESR Magnets and their Influence on Beam Optics”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC058, pp. 2148-2150.
- M. Gangeluk et al., “Acoustic Experimental Studies of High Power Modes in Accelerating Structure of Kurchatov SR Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR13, pp. 1815-1817.
- J. C. Brutus et al., “Mechanical Design of the 704 MHz 5-cell SRF Cavity Cold Mass for CeC PoP Experiment”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2678-2680.
- A. Sharma et al., “Design and testing of a universal embedded feedback controller for RF cavities”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6698, this conference.
- O. Matveeva, S. Pesterev, L. Sevryukova, and D. Filippov, “The Influence of Specially Created Oxide Films on the Emission Properties of Niobium”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C30, pp. 675-684.
- T. Hattori, T. Fukushima, H. Muto, H. Suzuki, and N. Ueda, “Development of a New IHQ Linac (Construction and Acceleration of a 2 MeV Prototype Linac)”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 944-947.
- F. Nolden et al., “Radioactive Beam Accumulation for a Storage Ring Experiment with an Internal Target”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA013, pp. 91-93.
- M. Tischer et al., “Damping Wigglers for the PETRA III Light Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE036, pp. 2446-2448.
- K. Haga et al., “The Vibration Measurements at the Photon Factory Storage Ring Building”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4A11, pp. 2388-2390.
- I. N. Okunev et al., “Magnetic Measurement of the NSLS-II Booster Dipole with Combine Functions”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME032, pp. 3579-3581.
- S. Kullander, S. Holm, B. Johansson, and A. Tidriks, “Proposal for a Sector-Focusing Synchro-Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper D-004, pp. XX-XX.
- A. Dolinskyy et al., “Orbit Correction System at the Collector Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO006, pp. 1886-1888.
- G. Le Bec, J. Chavanne, and P. N, “Shape Optimization for the ESRF II Magnets”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1232-1234.
- M. Bender, W. A. Assmann, and H. Kollmus, “Understanding of Ion Induced Desorption Using the ERDA Technique”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH173, pp. 1423-1425.
- H. Homeyer, “ISL-Berlin, an Ion Beam Laboratory for Applications”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper B-09, pp. 70-73.
- A. Filipchenko et al., “SIBERIA-2: Work in Progress”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP007G, pp. 608-610.
- B. Martin et al., “A New Injector Concept: The RFQ-Cyclotron Combination at ISL-Berlin”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper B-11, pp. 78-81.
- P. A. Görgen, O. Boine-Frankenheim, S. Appel, C. Dimopoulou, S. A. Litvinov, and M. Steck, “Experimental Studies of Beam Loss during Low Energy Operation with Electron Cooled Heavy Ions in the ESR”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS001, pp. 3424-3426.
- J. C. Huang, K.-B. Liu, and Y. S. Wong, “Zero Voltage Switching of Two-switch Flyback-Forward Converter”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD063, pp. 3656-3658.
- H.-E. Mahnke, “Invited Paper: Application of Heavy Ion Beams to Condensed Matter Studies”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper J-07, pp. 587-593.
- V. M. Panasyuk et al., “The Magnetic System of Electron Coolers of Collider NICA”, in Proc. 12th Workshop on Beam Cooling and Related Topics (COOL'19), Novosibirsk, Russia, Sep. 2019, pp. 112-115.
- A. Franchi, J. Chavanne, F. Ewald, L. Farvacque, T. P. Perron, and K. B. Scheidt, “Vertical Emittance Reduction and Preservation at the ESRF Electron Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUODA01, pp. 928-930.
- C. Egelhaaf, D. Erdmann, H. Homeyer, and W-D. Zeitz, “The VICKSI Beam Line Instrumentation and Control System”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1745-1748.
- M. Kumagai, “Computer Method for the Analysis of Axisymmetrical Magnetic Fields for an Accelerator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 845-848.
- J. C. Huang, K.-B. Liu, and Y. S. Wong, “Improvement of Output Current Characteristics for Bira MCOR30 Correction Magnet Power Supply”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO017, pp. 3373-3375.
- V. Korchuganov et al., “Status of the Siberia-2 Preinjector”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 739-742.
- J. Milburn, R. Caylor, J. Porter, R. Reimers, and J. Tanabe, “Design of a Three-Channel Septum Magnet”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3646-3648.
- Y. S. Wong, J. C. Huang, K.-B. Liu, and W. S. Wen, “High Precision Programmable of TPS Quadrupole Magnet Power Supply”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD066, pp. 3662-3664.
- H. Homeyer, “STATUS OF ISL”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 20C5, pp. XX-XX.
- G. M. Wang, R. P. Fliller, I. Pinayev, and T. V. Shaftan, “SVD-BASED METHOD FOR MEASUREMENT OF BEAM PARAMETERS AND FLAG RESOLUTION”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR092, pp. 999-1001.
- K. Abbasa, “DEVELOPMENTS IN ALPHA EMITTING RADIOISOTOPE PRODUCTION AT THE JOINT RESEARCH CENTRE (JRC) OF THE EUROPEAN COMMISSION”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P08, pp. XX-XX.
- F. T. Kuchnir, L. S. Skaggs, A. J. Elwyn, F. P. Mooring, and N. A. Frigerio, “Design of a Neutron Therapy Facility for a 30-inch Cyclotron”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 638-646.
- A. Tuzikov et al., “Heavy Ion Injection Chain of NICA Collider”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 52-54.
- O. A. Kovalenko, A. Dolinskyy, O. E. Gorda, and S. A. Litvinov, “Orbit Response Matrix Analysis for FAIR Storage Rings”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3219-3221.
- B. S. Wang, K.-B. Liu, and Y. S. Wong, “N+1 Redundancy Power Supply System by Paralleling Current Converter Modules with Digital Regulation Control”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO018, pp. 3376-3378.
- S. Holm, “Factors Affecting Beam Intensity and Quality in Synchrocyclotrons”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69H07, pp. XX-XX.
- A. Filipchenko et al., “Beam Energy Ramping at SIBERIA-2”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP095G, pp. 1426-1428.
- I. N. Okunev, A. Bogomyagkov, E. B. Levichev, P. A. Piminov, S. V. Sinyatkin, and P. Vobly, “Final Focus for the Crab-waist Tau-charm Factory”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP046, pp. 2623-2625.
- K. Satou et al., “Development of a Beam Induced Heat-Flow Monitor for the Beam Dump of the J-PARC RCS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN047, pp. 4084-4086.
- M. Bieler, S. Choroba, J. Hameister, I. Kazarezov, and V. Leonov, “Final Report on Hard Tube Pulser Activities at DESY”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP54C, pp. 2269-2271.
- A. L. Romanov et al., “CORRECTING THE ROUND BEAM LATTICE OF VEPP-2000 COLLIDER USING ORBIT RESPONSE TECHNIQUE”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH27, pp. XX-XX.
- V. Velthaus, M. Bender, and C. Trautmann, “Surface Treatment Procedures to Mitigate Ion-Induced Desorption in Heavy Ion Accelerators”, presented at the 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, paper TU1C2, unpublished.
- J. Kamiya et al., “Measurement of the Extraction Kicker System in J-PARC RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS110, pp. 1759-1761.
- M. Tischer et al., “Status of the PETRA III Damping Wigglers”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS121, pp. 3565-3567.
- S. Holm, “Status Report on the Gustaf Werner Cyclotron in Uppsala”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-22, pp. 106-109.
- A. Artiomov, “The Potentialities of H- beam Diagnositics by Detached Particles”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP047L, pp. 1654-1656.
- J. Porter, “Cryogenic System for a Superconducting Spectrometer”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2909-2911.
- T. Takayanagi et al., “Experimental Results of the Shift Bump Magnet in the J-PARC 3-GeV RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS111, pp. 1762-1764.
- P. J. Spiller, K. Blasche, P. H??lsmann, A. Kraemer, H. Ramakers, and H. R. Sprenger, “High Intensity Uranium Operation in SIS18”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT020, pp. 1180-1182.
- A. J. Jason, “Linac-Driven Spallation-Neutron Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAE02, pp. 1183-1187.
- T. Toyama, Y. Hashimoto, J. Kamiya, E. Nakamura, Y. Shirakabe, and Y. Shobuda, “Coupling impedance of the J-PARC kicker magnets”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUBX03, pp. 140-142.
Back to search