Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. K. NG, K. S. Khaw, and J. C. YAP, “Current Status of the High-Repetition-Rate Electron Driven Pulsed Muon Source at the SHINE Facility”, presented at the IPAC'26, Deauville, France, May 2026, paper THP3607, unpublished.
[n] A. F. Zeller, J. C. DeKamp, M. J. Dubois, J. A. Nolen, and R. T. Swanson, “Design and Construction of a Low Current, Cryogenically Efficient Beam Line Quadrupole”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B16, pp. 79-81.
[n] J. C. Besson, X. Deletoille, J.-F. Lamarre, D. Lefebvre, and H. Rozelot, “The Machine Installation at SOLEIL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS006, pp. 3275-3277.
[n] P. Odier, D. Belohrad, J-J. Gras, and M. Ludwig, “Operational Experience and Improvements of the LHC Beam Current Transformers”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD69, pp. 467-469.
[n] J. J. Barnard, M. A. Newton, L. L. Reginato, W. M. Sharp, H. D. Shay, and S. S. Yu, “Physics Issues in the Design of a Recirculating Induction Accelerator for Heavy Ion Fusion”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2592-2595.
[n] B. Keil et al., “Status of The SwissFEL BPM System”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 497-501. doi:10.18429/JACoW-IBIC2015-TUPB065
[n] M. S. Avilov et al., “Status of VEPP-5 Preinjector”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU401, pp. 299-301.
[n] M. Wendt Hamburg, “BPM Read-Out Electronics Based on the Broadband AM/PM Normalization Schema”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper CT01, pp. XX-XX.
[n] S. Lee, Y.-S. Cho, H. S. Kim, and H.-J. Kwon, “Installation, Commissioning and Characterization of EBIS-SC as a Short Pulsed Proton Source at KOMAC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1721-1723. doi:10.18429/JACoW-IPAC2018-TUPML076
[n] A. Ropert et al., “Latest Developments at the ESRF”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI002, pp. 736-738.
[n] Y. S. Wong, J. C. Huang, and K.-B. Liu, “Analysis and Compensator Design of Magnet Correction Power Supply”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO014, pp. 3364-3366.
[n] M. Walter et al., “Alignment of Components at the University of Maryland Electron Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB075, pp. 2577-2579.
[n] V. Korchuganov et al., “Injection System for the SIBERIA-2 Storage Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1384-1387.
[n] H. Hinterberger, J. Satti, C. Schmidt, R. Sheldon, and R. Yamada, “Bending Magnets of the NAL Main Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 853-857.
[n] S. P. Antipov, S. V. Kuzikov, A. Liu, A. V. Savilov, and A. A. Vikharev, “Tapered Flying Radiofrequency Undulator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4059-4061. doi:10.18429/JACoW-IPAC2018-THPMF012
[n] D. Lawton, H. G. Blosser, J. M. Moskalik, and G. A. Stork, “Mechanical Design Features of the MSU K800 Cyclotron Superconducting Coil”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B21, pp. 98-98.
[n] C. F. Chang, “Real-Time Motor Control System for Beamlines”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 41-43. doi:10.18429/JACoW-MEDSI2016-MOPE18
[n] S. Brandenburg, W. K. van Asselt, H. Post, H. W. Schreuder, and B. Laun?®, “Beam Diagnostics in the AGOR Cyclotron”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper CT10, pp. XX-XX.
[n] M. Paraliev, H.-H. Braun, S. Dordevic, and C. H. Gough, “High Stability Resonant Kicker Development for the SwissFEL Switch Yard”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP039, pp. 103-106.
[n] A. Artiomov, “The Potentialities of H- beam Diagnositics by Detached Particles”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP047L, pp. 1654-1656.
[n] R. Assmann et al., “Tools for Predicting Cleaning Efficiency in the LHC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG013, pp. 3494-3496.
[n] A. Adelmann, P. Arbenz, C. Kraus, and M. Wittberger, “Comparison of h- and p- Refinement in a Finite Element Maxwell Time Domain Solver”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEA4IS04, pp. 288-288.
[n] Z. J. Liptak, “Possibilities for Upgrading to Polarized a SuperKEKB”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1901-1903. doi:10.18429/JACoW-IPAC2022-WEPOPT026
[n] H. Li, S. Bernal, T. F. Godlove, R. A. Kishek, P. G. O'Shea, and M. Reiser, “Printed-Circuit Magnets for the University of Maryland Electron Ring (UMER) - New Developments”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH060, pp. 1802-1804.
[n] R. Eichhorn et al., “The Baseband Low Level RF Control for the S-DALINAC: A Flexible Solution for Other Frequencies?”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO048, pp. 689-692.
[n] J.-B. Lallement et al., “Linac4 Commissioning Strategy”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1D01, pp. 405-409.
[n] N. V. Mokhov et al., “Crystal Collimation Studies at the Tevatron (T-980)”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE1GRC05, pp. 1836-1838.
[n] F. Becker et al., “Beam Induced Fluorescence MonitorÔÇôSpectroscopy in Nitrogen, Helium, Argon, Krypton, and Xenon Gas”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM020, pp. 156-159.
[n] Y. Nosochkov et al., “Specification of Field Quality of the Interaction Region Magnets of the High Luminosity LHC Based on Dynamic Aperture”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1013-1016. doi:10.18429/JACoW-IPAC2014-TUPRO008
[n] S. V. Kuzikov, I. V. Bandurkin, M. E. Plotkin, A. V. Savilov, and A. A. Vikharev, “Terahertz FEL based on Photoinjector Beam in RF Undulator”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP046, pp. 485-488.
[n] C. Cuevas, J.-C. Denard, A. P. Freyberger, and Y. Sharabian Jefferson Lab, “Beam Charge Asymmetry Monitors for Low Intensity Continuous Electron Beam”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper CT10, pp. XX-XX.
[n] B. Buonomo et al., “Profile Monitors for Wide Multiplicity Range Electron Beams”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT010, pp. XX-XX.
[n] L. Ma, P. Shi, K. Xue, J. Cao, and L. Wang, “The Tune Measurements in the BEPC Storage Ring”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D053, pp. 522-524.
For LaTeX
Use Complete Form
For BibTeX
References
- J. K. NG, K. S. Khaw, and J. C. YAP, “Current Status of the High-Repetition-Rate Electron Driven Pulsed Muon Source at the SHINE Facility”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP3607, this conference.
- A. F. Zeller, J. C. DeKamp, M. J. Dubois, J. A. Nolen, and R. T. Swanson, “Design and Construction of a Low Current, Cryogenically Efficient Beam Line Quadrupole”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B16, pp. 79-81.
- J. C. Besson, X. Deletoille, J.-F. Lamarre, D. Lefebvre, and H. Rozelot, “The Machine Installation at SOLEIL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS006, pp. 3275-3277.
- P. Odier, D. Belohrad, J-J. Gras, and M. Ludwig, “Operational Experience and Improvements of the LHC Beam Current Transformers”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD69, pp. 467-469.
- J. J. Barnard, M. A. Newton, L. L. Reginato, W. M. Sharp, H. D. Shay, and S. S. Yu, “Physics Issues in the Design of a Recirculating Induction Accelerator for Heavy Ion Fusion”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2592-2595.
- B. Keil et al., “Status of The SwissFEL BPM System”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 497-501.
- M. S. Avilov et al., “Status of VEPP-5 Preinjector”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU401, pp. 299-301.
- M. Wendt Hamburg, “BPM Read-Out Electronics Based on the Broadband AM/PM Normalization Schema”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper CT01, pp. XX-XX.
- S. Lee, Y.-S. Cho, H. S. Kim, and H.-J. Kwon, “Installation, Commissioning and Characterization of EBIS-SC as a Short Pulsed Proton Source at KOMAC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1721-1723.
- A. Ropert et al., “Latest Developments at the ESRF”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI002, pp. 736-738.
- Y. S. Wong, J. C. Huang, and K.-B. Liu, “Analysis and Compensator Design of Magnet Correction Power Supply”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO014, pp. 3364-3366.
- M. Walter et al., “Alignment of Components at the University of Maryland Electron Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB075, pp. 2577-2579.
- V. Korchuganov et al., “Injection System for the SIBERIA-2 Storage Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1384-1387.
- H. Hinterberger, J. Satti, C. Schmidt, R. Sheldon, and R. Yamada, “Bending Magnets of the NAL Main Accelerator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 853-857.
- S. P. Antipov, S. V. Kuzikov, A. Liu, A. V. Savilov, and A. A. Vikharev, “Tapered Flying Radiofrequency Undulator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4059-4061.
- D. Lawton, H. G. Blosser, J. M. Moskalik, and G. A. Stork, “Mechanical Design Features of the MSU K800 Cyclotron Superconducting Coil”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B21, pp. 98-98.
- C. F. Chang, “Real-Time Motor Control System for Beamlines”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 41-43.
- S. Brandenburg, W. K. van Asselt, H. Post, H. W. Schreuder, and B. Laun?®, “Beam Diagnostics in the AGOR Cyclotron”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper CT10, pp. XX-XX.
- M. Paraliev, H.-H. Braun, S. Dordevic, and C. H. Gough, “High Stability Resonant Kicker Development for the SwissFEL Switch Yard”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP039, pp. 103-106.
- A. Artiomov, “The Potentialities of H- beam Diagnositics by Detached Particles”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP047L, pp. 1654-1656.
- R. Assmann et al., “Tools for Predicting Cleaning Efficiency in the LHC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAG013, pp. 3494-3496.
- A. Adelmann, P. Arbenz, C. Kraus, and M. Wittberger, “Comparison of h- and p- Refinement in a Finite Element Maxwell Time Domain Solver”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEA4IS04, pp. 288-288.
- Z. J. Liptak, “Possibilities for Upgrading to Polarized a SuperKEKB”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1901-1903.
- H. Li, S. Bernal, T. F. Godlove, R. A. Kishek, P. G. O'Shea, and M. Reiser, “Printed-Circuit Magnets for the University of Maryland Electron Ring (UMER) - New Developments”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH060, pp. 1802-1804.
- R. Eichhorn et al., “The Baseband Low Level RF Control for the S-DALINAC: A Flexible Solution for Other Frequencies?”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO048, pp. 689-692.
- J.-B. Lallement et al., “Linac4 Commissioning Strategy”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1D01, pp. 405-409.
- N. V. Mokhov et al., “Crystal Collimation Studies at the Tevatron (T-980)”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE1GRC05, pp. 1836-1838.
- F. Becker et al., “Beam Induced Fluorescence MonitorÔÇôSpectroscopy in Nitrogen, Helium, Argon, Krypton, and Xenon Gas”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM020, pp. 156-159.
- Y. Nosochkov et al., “Specification of Field Quality of the Interaction Region Magnets of the High Luminosity LHC Based on Dynamic Aperture”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1013-1016.
- S. V. Kuzikov, I. V. Bandurkin, M. E. Plotkin, A. V. Savilov, and A. A. Vikharev, “Terahertz FEL based on Photoinjector Beam in RF Undulator”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP046, pp. 485-488.
- C. Cuevas, J.-C. Denard, A. P. Freyberger, and Y. Sharabian Jefferson Lab, “Beam Charge Asymmetry Monitors for Low Intensity Continuous Electron Beam”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper CT10, pp. XX-XX.
- B. Buonomo et al., “Profile Monitors for Wide Multiplicity Range Electron Beams”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT010, pp. XX-XX.
- L. Ma, P. Shi, K. Xue, J. Cao, and L. Wang, “The Tune Measurements in the BEPC Storage Ring”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D053, pp. 522-524.
Back to search