Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Schreiber, B. Faatz, and K. Honkavaara, “Operation of FLASH at 6.5 nm Wavelength”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC030, pp. 133-135.
[n] M. Chung et al., “Transverse Beam Halo Measurements at High Intensity Neutrino Source (HINS) using Vibrating Wire Monitor”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA062, pp. 819-821.
[n] J. D. Fox, T. Mastorides, C. H. Rivetta, and D. Van Winkle, “Selecting RF Amplifiers for Impedance Controlled LLRF Systems - Nonlinear Effects and System Implications”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS047, pp. 2451-2453.
[n] P. A. Sanger, “Radiation Damage Limitations for the Fermilab Energy Doubler/Saver”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1334-1337.
[n] T. Itahashi, S. Mine, H. Ogata, and N. Yasui, “Arc Characteristics of the Self Heated PIG Ion Source”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper M-08, pp. 731-734.
[n] K. Takayama, T. Adachi, K. Okamura, M. Wake, and Y. Iwata, “A Racetrack-Shape Fixed Field Induction Accelerator for Giant Cluster Ions”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA18, pp. 83-85.
[n] C. Schmidt, R. Noble, J. Palkovic, and F. Mills, “Redesign of the Low Energy Section of the Fermilab Linac to Improve Beam Brightness”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-56, pp. 188-189.
[n] G. T. Konrad, “Performance of a High Efficiency High Power UHF Klystron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1689-1692.
[n] B. Li, H. Hao, Y. K. Wu, and J. Y. Li, “FEL Wiggler Bussbar Field Compensation”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 532-534. doi:10.18429/JACoW-NAPAC2016-TUPOB19
[n] K. Okamura and K. Takayama, “Development of an Induction Accelerator Cell Driver Utilizing 3.3 kV SiC-MOSFETs”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3388-3390. doi:10.18429/JACoW-IPAC2017-WEPVA056
[n] M. Giovannozzi and P. Scaramuzzi, “Nonlinear Dynamics Studies at the CERN Proton Synchrotron: Precise Measurements of Islands Parameters for the Novel Multi-turn Extraction”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT018, pp. 1861-1863.
[n] K. Gubin et al., “High-power Proton Irradiated Solid State Rotating Neutron Target: First Tests of Converter Materials”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO037, pp. 2798-2800.
[n] R. Nagaoka, “Modelling of a Linearly Coupled Machine using the Coupled-Response Matrix”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP03G, pp. 912-914.
[n] S. Mori, D. Sato, and M. Yoshida, “The Design Optimization of the Dielectric Assist Accelerating Structure for Better Heat and Gas Transfer”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1179-1181. doi:10.18429/JACoW-IPAC2019-TUXXPLS3
[n] G. T. Konrad, “High Power RF Klystrons for Linear Accelerators”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper WED0004, pp. 293-297.
[n] J. J. Welch, S. DeBarger, P. Emma, N. Li, and J. Wu, “LCLS Compressor Dipole Field Quality and Beam Measurements”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH033, pp. 313-316.
[n] J. P. Penicaud, “Design and Magnetic Measurements of the New Magnets for the Saclay Proton Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1346-1349.
[n] A. Kabe, K. Egawa, K. Endo, and K. Takayama, “Precise Alignment of Magnets in the TRISTAN Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1648-1651.
[n] Y. Suetsugu, H. Hisamatsu, K.-I. Kanazawa, and K. Shibata, “Continued Study on Photoelectron and Secondary Electron Yield of TiN Coating and NEG (Ti-Zr-V) Coatings at the KEKB Positron Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN042, pp. 4054-4056.
[n] M. Yoshii et al., “Status of the J-PARC Ring RF Systems”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC006, pp. 3281-3283.
[n] K. B. Mallory, “Applications of Microprocessors in Upgrading of Accelerator Controls”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1677-1681.
[n] B. Kriegbaum and F. Pedersen, “Electronics for the Longitudinal Active Damping System for the CERN PS Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1695-1698.
[n] R. D?Âlling, “Determination of Radial Ion Beam Profile from the Energy Spectrum of Residual Gas Ions Accelerated in the Beam Potential”, in Proc. DIPAC'99, Chester, UK, May 1999, paper CT02, pp. XX-XX.
[n] J. Spencer, S. Mao, and C. M. Spencer, “Further Experience with the SLC Permanent Magnetic (PM) Multipoles”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE019, pp. 779-781.
[n] S. L. Smith and S. F. Hill, “Daresbury SRS Positional Feedback Systems”, in Proc. DIPAC'99, Chester, UK, May 1999, paper CT05, pp. XX-XX.
[n] M. Nomura et al., “Condition of MA Cut Cores in the RF Cavities of J-PARC Main Ring after Several Years of Operation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC019, pp. 107-109.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Schreiber, B. Faatz, and K. Honkavaara, “Operation of FLASH at 6.5 nm Wavelength”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC030, pp. 133-135.
- M. Chung et al., “Transverse Beam Halo Measurements at High Intensity Neutrino Source (HINS) using Vibrating Wire Monitor”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA062, pp. 819-821.
- J. D. Fox, T. Mastorides, C. H. Rivetta, and D. Van Winkle, “Selecting RF Amplifiers for Impedance Controlled LLRF Systems - Nonlinear Effects and System Implications”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS047, pp. 2451-2453.
- P. A. Sanger, “Radiation Damage Limitations for the Fermilab Energy Doubler/Saver”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1334-1337.
- T. Itahashi, S. Mine, H. Ogata, and N. Yasui, “Arc Characteristics of the Self Heated PIG Ion Source”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper M-08, pp. 731-734.
- K. Takayama, T. Adachi, K. Okamura, M. Wake, and Y. Iwata, “A Racetrack-Shape Fixed Field Induction Accelerator for Giant Cluster Ions”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA18, pp. 83-85.
- C. Schmidt, R. Noble, J. Palkovic, and F. Mills, “Redesign of the Low Energy Section of the Fermilab Linac to Improve Beam Brightness”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-56, pp. 188-189.
- G. T. Konrad, “Performance of a High Efficiency High Power UHF Klystron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1689-1692.
- B. Li, H. Hao, Y. K. Wu, and J. Y. Li, “FEL Wiggler Bussbar Field Compensation”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 532-534.
- K. Okamura and K. Takayama, “Development of an Induction Accelerator Cell Driver Utilizing 3.3 kV SiC-MOSFETs”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3388-3390.
- M. Giovannozzi and P. Scaramuzzi, “Nonlinear Dynamics Studies at the CERN Proton Synchrotron: Precise Measurements of Islands Parameters for the Novel Multi-turn Extraction”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT018, pp. 1861-1863.
- K. Gubin et al., “High-power Proton Irradiated Solid State Rotating Neutron Target: First Tests of Converter Materials”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO037, pp. 2798-2800.
- R. Nagaoka, “Modelling of a Linearly Coupled Machine using the Coupled-Response Matrix”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP03G, pp. 912-914.
- S. Mori, D. Sato, and M. Yoshida, “The Design Optimization of the Dielectric Assist Accelerating Structure for Better Heat and Gas Transfer”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1179-1181.
- G. T. Konrad, “High Power RF Klystrons for Linear Accelerators”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper WED0004, pp. 293-297.
- J. J. Welch, S. DeBarger, P. Emma, N. Li, and J. Wu, “LCLS Compressor Dipole Field Quality and Beam Measurements”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH033, pp. 313-316.
- J. P. Penicaud, “Design and Magnetic Measurements of the New Magnets for the Saclay Proton Synchrotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1346-1349.
- A. Kabe, K. Egawa, K. Endo, and K. Takayama, “Precise Alignment of Magnets in the TRISTAN Main Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1648-1651.
- Y. Suetsugu, H. Hisamatsu, K.-I. Kanazawa, and K. Shibata, “Continued Study on Photoelectron and Secondary Electron Yield of TiN Coating and NEG (Ti-Zr-V) Coatings at the KEKB Positron Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN042, pp. 4054-4056.
- M. Yoshii et al., “Status of the J-PARC Ring RF Systems”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC006, pp. 3281-3283.
- K. B. Mallory, “Applications of Microprocessors in Upgrading of Accelerator Controls”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1677-1681.
- B. Kriegbaum and F. Pedersen, “Electronics for the Longitudinal Active Damping System for the CERN PS Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1695-1698.
- R. D?Âlling, “Determination of Radial Ion Beam Profile from the Energy Spectrum of Residual Gas Ions Accelerated in the Beam Potential”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper CT02, pp. XX-XX.
- J. Spencer, S. Mao, and C. M. Spencer, “Further Experience with the SLC Permanent Magnetic (PM) Multipoles”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPE019, pp. 779-781.
- S. L. Smith and S. F. Hill, “Daresbury SRS Positional Feedback Systems”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper CT05, pp. XX-XX.
- M. Nomura et al., “Condition of MA Cut Cores in the RF Cavities of J-PARC Main Ring after Several Years of Operation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC019, pp. 107-109.
Back to search