JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	V. Chouhan, A. Netepenko, D. Bice, D. Burk, G. Wu, and T. Ring, “Centrifugal barrel polishing of a 650 MHz single-cell niobium SRF cavity”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper WEP010, unpublished. 
[n]	J. G. Alessi, J. M. Brennan, A. Kponou, V. LoDestro, and P. A. Montemurro, “The BNL 200 MeV H- Linac - Performance and Upgrades”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH432, pp. 674-676. 
[n]	M. Khojoyan, A. Cauchois, J. Prudent, and A. Specka, “A Compact Permanent Magnet Spectrometer for CILEX”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 320-324. doi:10.18429/JACoW-ICAP2018-WEPAF01
[n]	V. G. Mudrolyubov et al., “The CC1-3 Cyclotron System. Installation and Test Results”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 182-184. doi:10.18429/JACoW-RUPAC2016-TUCASH05
[n]	D. Giove et al., “Study and Design of Room Temperature Cavities for an RF Compressor Prototype”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB019, pp. 2080-2082. 
[n]	F. Hug, T. Kuerzeder, and N. Pietralla, “Upcoming Measurements of Transverse Beam Break-Up at the Superconducting Recirculating Electron Accelerator S-DALINAC”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PS09, pp. 97-99. 
[n]	P. F. Meads and F. B. Selph, “Extraction and Transfer of High-Quality Beams from Synchrotrons of the FOOFDOD Type with Application to the Omnitron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 242-246. 
[n]	S. U. De Silva, K. E. Deitrick, J. R. Delayen, and H. Park, “Beam Dynamics Studies of 499 MHz Superconducting RF-Dipole Deflecting Cavity System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3564-3567. doi:10.18429/JACoW-IPAC2015-WEPWI035
[n]	A. Reichold et al., “The LiCAS-RTRS -- A Survey System for the ILC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH195, pp. 520-522. 
[n]	C. Boffo et al., “Fabrication of the New Superconducting Undulator for the ANKA Synchrotron Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD021, pp. 3135-3137. 
[n]	Y. Asano and T. Bizen, “Estimations for Demagnetization of ID Permanent Magnets due to Installation of OTR”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC165, pp. 3281-3283. 
[n]	J. M. Jimenez et al., “MedAustron Beam Vacuum System : From sources to Patient Treatment Rooms”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS022, pp. 1572-1574. 
[n]	H. L. Hagedoorn and N. F. Verster, “The Magnetic Field of a Two-Particle Fixed Energy AVF Cyclotron without Trimming Coils”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63F07, pp. XX-XX. 
[n]	L. Liu et al., “Update on Sirius, the New Brazilian Synchrotron Light Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 191-193. doi:10.18429/JACoW-IPAC2014-MOPRO048
[n]	K. E. Deitrick, J. R. Delayen, and G. A. Krafft, “High Average Brilliance Compact Inverse Compton Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 932-935. doi:10.18429/JACoW-IPAC2017-MOPVA036
[n]	K. E. Deitrick, J. R. Delayen, B. R. P. Gamage, G. A. Krafft, and T. Satogata, “Progress on a Compact Accelerator Design for a Compton Light Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1706-1708. doi:10.18429/JACoW-IPAC2015-TUPJE041
[n]	G. T. de Kruiff and N. F. Verster, “A Modified Regenerative Extractor System for a Synchro - Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63B05, pp. XX-XX. 
[n]	P. Cruikshank, S. D. Claudet, W. Maan, L. Mourier, A. Perrier-Cornet, and N. Provot, “Leak Tightness of LHC Cold Vacuum Systems”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS020, pp. 1566-1568. 
[n]	T. Bizen, “Brief Review of the Approaches to Elucidate the Mechanism of the Radiation-induced Demagnetization”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper WG5005, pp. 121-126. 
[n]	K. Dunkel, U. Berges, M. Grewe, R. Heine, and T. Weis, “Evaluation and Modeling of Longitudinal Storage Ring Impedance using Current Dependent Bunch Lengthening and Bunch Deformation Effects”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI024, pp. 1476-1478. 
[n]	L. Hoummi, L. Carver, N. Carmignani, S. White, S. Liuzzo, and T. Perron, “Towards a true diffraction limited light source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2569-2574. doi:10.18429/JACoW-IPAC2023-WEXG1
[n]	A. Seryi et al., “ATF2 Commissioning”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR1RAI03, pp. 4205-4209. 
[n]	T. Satogata, I. Campbell, G. Marr, and P. Sampson, “Operations Electronic Logbook Experience at BNL”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO009, pp. 2049-2051. 
[n]	S. Berry et al., “Clean Room Integration of the European XFEL Cavity Strings”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2474-2476. doi:10.18429/JACoW-IPAC2014-WEPRI001
[n]	V. Porshyn, D. L??tzenkirchen-Hecht, P. Serbun, H. B??rger, and S. Soykarci, “Laser Treatment of Niobium Surface for SRF Aplications”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2387-2390. doi:10.18429/JACoW-IPAC2018-WEPMF010
[n]	P.-Y. Beauvais, R. Ferdinand, G. Haouat, S. Nath, and N. Pichoff, “Measurement of Space Charge-Dynamics Effects in a FODO Channel”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP25G, pp. 1124-1126. 
[n]	P. A. Gurd and R. Keitel, “CPP/CXML - a Host-Based Sequencer for EPICS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP038, pp. 173-175. 
[n]	F. H. de Sá, L. Liu, and X. R. Resende, “Implementation of a Low-Emittance Optics for the LNLS UVX Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC002, pp. 2907-2908. 
[n]	K. E. Deitrick, A. Hutton, A. C. Bartnik, C. M. Gulliford, and S. A. Overstreet, “Novel Straight Merger for Energy Recovery Linacs”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 702-705. doi:10.18429/JACoW-LINAC2018-THPO010
[n]	D. M. Gassner, C. Liu, R. J. Michnoff, T. A. Miller, M. G. Minty, and M. Wilinski, “Status of the BNL ERL Instrumentation”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PS11, pp. 100-105. 
[n]	R. W. Roeth, H.-G. Kuerschner, G. Mueller, H. Piel, and D. Reschke, “Thermal Stability of Superconducting Nb Cavities at 3 GHz”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1325-1328. 
[n]	L. Liu, N. Milas, A. H. C. Mukai, X. R. Resende, and F. H. de S?í, “UPGRADED OPTICS FOR SIRIUS WITH IMPROVED MATCHING OF ELECTRON AND PHOTON BEAM EMITTANCES”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1407-1409. doi:10.18429/JACoW-IPAC2015-TUPWA007
[n]	S. White, L. Carver, L. Farvacque, and S. Liuzzo, “Status and recent developments of python Accelerator Toolbox”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3185-3188. doi:10.18429/JACoW-IPAC2023-WEPL031
[n]	G. Arnolds-Mayer, K. Jaeger, and R. Mayer, “Industrial Production of 8 Superconducting Accelerator Modules for HERA and 6 Superconducting Accelerating Cavities for DALINAC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1070-1073. 
[n]	P. Pierini et al., “RF Tests of the Single Cell Prototypes for the TRASCO beta=0.47 Cavities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO023, pp. 2277-2279. 
[n]	J. F. Bouteille, “A High Quality Power Supply at the ESRF”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2335-2338. 
[n]	M. Pont, E. Boter, and M. L. Lopes, “Magnets for the Storage Ring ALBA”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS080, pp. 2562-2564. 
[n]	B. Rusnak, “High Intensity Proton Linacs”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95J01, pp. 752-752. 
[n]	C. S. Hopper, K. E. Deitrick, and J. R. Delayen, “Geometry Effects on Multipole Components and Beam Optics in High-Velocity Multi-Spoke Cavities”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC42, pp. 868-870. 
[n]	L. Liu et al., “Preliminary Sirius Commissioning Results”, in Proc. IPAC'20, Caen, France, May 2020, pp. 11. doi:10.18429/JACoW-IPAC2020-MOVIR06
[n]	C. Compton et al., “Studies of alternative techniques for niobium cavity fabrication”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP01, pp. XX-XX. 
[n]	V. M. Biryukov, Y. A. Chesnokov, V. I. Kotov, D. Trbojevic, and A. Stevens, “Optimization of the Parameters in the RHIC Single Crystal Heavy Ion Collimation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA66, pp. 1237-1239. 
[n]	C. Pardine, R. H. A. Farias, and P. F. Tavares, “Commissioning of the 2,2 kW, 476 MHz Solid State RF Power Source for the LNLS Booster Synchrotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD029, pp. 511-513. 
[n]	H. L. Hagedoorn and N. F. Verster, “The Extraction of the Beam of the Philips AVF Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63E09, pp. XX-XX. 
[n]	S. L. Smith and L. A. Welbourne, “Bump Compensation and System Error Detection using a Microsoft EXCEL Spread Sheet”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1024-1027. 
[n]	A.-L. Perrot, M. B. M. Barberan Marin, J.-P. Corso, K. Foraz, M. Lazzaroni, and Y. Muttoni, “Actions To Mitigate The Radiation Damage to Electronics at the LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA041, pp. 2591-2593. 
[n]	S. Cavalier, P. M. Puzo, H. Burkhardt, and A. Peskov, “90 m * Optics for ATLAS/ALFA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ002, pp. 1798-1800. 
[n]	T. Suwada, M. Satoh, K. Minoshima, and S. Telada, “Development of a Laser-based Alignment System Utilizing Fresnel Zone Plates at the KEKB Injector Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD065, pp. 2672-2674. 
[n]	T. Suwada, M. Satoh, K. Minoshima, and S. Telada, “Recent Progress of a Laser-based Alignment System at the KEKB Injector Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME016, pp. 2959-2961. 
[n]	J. Teichert et al., “Progress of SRF Gun Development and Operation at the ELBE Accelerator”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper WG101, pp. 11-15. 
[n]	K. E. Deitrick, J. R. Delayen, G. A. Krafft, and B. Terzic, “Compact SRF Linac for High Brilliance Inverse Compton Scattering Light Source”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 19-23. doi:10.18429/JACoW-LINAC2018-MO2A04
[n]	S. Shibata, Z. Igarashi, H. Ishii, and K. Muto, “KEK Beam Position Monitor System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1736-1739. 
[n]	R. S. Lord et al., “Heavy Ion Acceleration at ORIC”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69E03, pp. XX-XX. 
[n]	K.-G. Rensfelt, “Status of the CRYRING Project”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2814-2817. 
[n]	M. F. Vorogushin, Yu. N. Gavrish, A. V. Galchuk, L. I. Korolev, V. G. Mudrolyubov, and A. V. Stepanov, “APPLIED LOW-ENERGY CYCLOTRON”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WENO17, pp. XX-XX. 
[n]	F. H. de S?í, L. Liu, N. Milas, and X. R. Resende, “Instability Thresholds and Tune Shift Estimation for Sirius”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 70-73. doi:10.18429/JACoW-IPAC2015-MOPWA001
[n]	J. C. Cornell and C. M. Merry, “Proposed Transfer Beamline for the NAC”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3221-3224. 
[n]	R. S. Shinde, P. Pareek, R. R. Yadav, and S. Kotaiah, “Development of Fast Decay Type Pulsed Kicker Magnet for Indus-1”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16059, pp. XX-XX. 
[n]	S. Petitdemange, L. Claustre, A. Homs, R. Homs Regojo, and E. Papillon, “The LIMA Project Update”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOAAB08, pp. 1489-1492. 
[n]	Y. Irie et al., “Wideband Low-output Impedance RF System for the ISIS Second Harmonic Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC063, pp. 609-611. 
[n]	J. A. Clarke, J. N. Corlett, M. W. Poole, S. L. Smith, V. P. Suller, and L. A. Welbourne, “Nonlinear Behaviour in the Proposed Lattice of the Daresbury Advanced Photon Source”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 129-132. 
[n]	N. Y. Huang et al., “Study of a THz/VUV Free Electron Laser Facility in Taiwan”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2980-2982. doi:10.18429/JACoW-IPAC2014-THPRO050
[n]	N. Catalan-Lasheras, H. Ludewig, N. Simos, M. Todosow, J. Walker, and J. Wei, “Assessment of Thermal Shock Attenuation in the Particle Bed of the Spallation Neutron Source Collimator”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B11, pp. 2477-2479. 
[n]	H. Hara and K. Sennyu, “The Development of Cryomodule for c-ERL at MHI”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PS15, pp. 112-114. 
[n]	W. G. Davies, “Semi-Automatic Procedures for Matching the Emittance of the Injected Beam to the Chalk River Superconducting Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2757-2760. 
[n]	D. Wang, T. Zhang, Z. T. Zhao, and X. M. Yang, “Conceptual Design of a High Brightness and Fully Coherent Free Electron Laser in VUV Regime”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPB21, pp. 302-303. 
[n]	Y. Jiao, “Beam Dynamics Studies on the Injector of the IHEP ERL Test Facility”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PS04, pp. 90-92. 
[n]	N. F. Verster, “Regenerative Beam Extraction from the 150-MeV Synchrocyclotron at the Laboratoire Curie”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59E02, pp. 224-229. 
[n]	X. R. Resende, R. Basilio, L. Liu, P. P. Sanchez, and G. Tosin, “Modeling of Bending Magnets for SIRIUS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC053, pp. 250-252. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search