Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Okayasu et al., “Feasibility Study for a Single-Shot 3D Electron Bunch Charge Distribution Monitor with a Polarized Probe Laser at SPring-8 Photoinjector”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD68, pp. 464-466.
[n] K. Sato et al., “Design of the HIMAC Synchrotron Power Supply”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1291-1294.
[n] H. Xu, H.-C. Hseuh, K. Wilson, D. Zigrosser, and M. J. Ferreira, “EPICS Interface and Control of NSLS-II Residual Gas Analyzer System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC122, pp. 392-394.
[n] H. Tomizawa et al., “Novel Nondestructive Shot-by-Shot Monitor to Measure 3D Bunch Charge Distribution With a Femtosecond EO-Sampling”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB20, pp. 445-448.
[n] C. X. Wang, “Spatial-Temporal Modes Observed in the APS Storage Ring Using MIA”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB061, pp. 3410-3412.
[n] V. V. Parkhomchuk, M. I. Bryzgunov, A. D. Goncharov, and V. B. Reva, “Cascade Transformer for High Voltage Coolers”, in Proc. COOL'21, Novosibirsk, Russia, Nov. 2021, paper P2006, pp. 101-102.
[n] A. Nadji et al., “SOLEIL Status Report”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1419-1421. doi:10.18429/JACoW-IPAC2015-TUPWA012
[n] O. Kumar, N. Falls, and S. Philip, “Jefferson Lab’s 20A Bipolar Trim power supply for Very Low Inductance Load”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPM091, unpublished.
[n] G. T. de Kruiff and N. F. Verster, “A Modified Regenerative Extractor System for a Synchro - Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63B05, pp. XX-XX.
[n] Yu. I. Maltseva et al., “VEPP-5 Injection Complex Performance Improvement for Two Collider Operation”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 39-43. doi:10.18429/JACoW-RUPAC2018-TUZMH02
[n] E. Wang et al., “The Progress of Funnelling Gun High Voltage Condition and Beam Test”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2735-2737. doi:10.18429/JACoW-IPAC2015-WEPJE033
[n] N. Hubert, L. Cassinari, J.-C. Denard, P. Lebasque, L. S. Nadolski, and D. Pedeau, “SOLEIL Beam Orbit Stability Improvements”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD78, pp. 488-490.
[n] N. Hubert et al., “Design of a New Blade-Type XBPM”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPD22, pp. 687-690.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Okayasu et al., “Feasibility Study for a Single-Shot 3D Electron Bunch Charge Distribution Monitor with a Polarized Probe Laser at SPring-8 Photoinjector”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD68, pp. 464-466.
- K. Sato et al., “Design of the HIMAC Synchrotron Power Supply”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1291-1294.
- H. Xu, H.-C. Hseuh, K. Wilson, D. Zigrosser, and M. J. Ferreira, “EPICS Interface and Control of NSLS-II Residual Gas Analyzer System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC122, pp. 392-394.
- H. Tomizawa et al., “Novel Nondestructive Shot-by-Shot Monitor to Measure 3D Bunch Charge Distribution With a Femtosecond EO-Sampling”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB20, pp. 445-448.
- C. X. Wang, “Spatial-Temporal Modes Observed in the APS Storage Ring Using MIA”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB061, pp. 3410-3412.
- V. V. Parkhomchuk, M. I. Bryzgunov, A. D. Goncharov, and V. B. Reva, “Cascade Transformer for High Voltage Coolers”, in Proc. 13th Workshop on Beam Cooling and Related Topics (COOL'21), Novosibirsk, Russia, Nov. 2021, paper P2006, pp. 101-102.
- A. Nadji et al., “SOLEIL Status Report”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1419-1421.
- O. Kumar, N. Falls, and S. Philip, “Jefferson Lab’s 20A Bipolar Trim power supply for Very Low Inductance Load”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM091, unpublished.
- G. T. de Kruiff and N. F. Verster, “A Modified Regenerative Extractor System for a Synchro - Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63B05, pp. XX-XX.
- Yu. I. Maltseva et al., “VEPP-5 Injection Complex Performance Improvement for Two Collider Operation”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 39-43.
- E. Wang et al., “The Progress of Funnelling Gun High Voltage Condition and Beam Test”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2735-2737.
- N. Hubert, L. Cassinari, J.-C. Denard, P. Lebasque, L. S. Nadolski, and D. Pedeau, “SOLEIL Beam Orbit Stability Improvements”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD78, pp. 488-490.
- N. Hubert et al., “Design of a New Blade-Type XBPM”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPD22, pp. 687-690.
Back to search