Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. S. Hopper and J. R. Delayen, “Higher Order Mode Damping in Superconducting Spoke Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2669-2671. doi:10.18429/JACoW-IPAC2014-WEPRI076
[n] E. Laface, R. Ostojic, C. Santoni, W. Scandale, and D. Tommasini, “Interaction Region with Slim Quadrupoles”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH044, pp. 2014-2016.
[n] J. Christie, L. Corner, J. Henderson, and E. Snedden, “Developing a two-colour all-fibre balanced optical cross-correlator for sub-femtosecond synchronisation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4135-4138. doi:10.18429/JACoW-IPAC2023-THPA073
[n] G. Balik et al., “Active Vibration Isolation System for CLIC Final Focus”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1775-1777. doi:10.18429/JACoW-IPAC2014-TUPRI088
[n] Z. Ni, J. Liu, J. Luo, and X. Zhou, “The Design of Tango Based Centralized Management Platform for Software Devices”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1121-1124. doi:10.18429/JACoW-ICALEPCS2017-THBPL04
[n] M. W. McMullin, T. Junginger, P. Kolb, R. E. Laxdal, and Z. Y. Yao, “Thermal Feedback in Coaxial SRF Cavities”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 224-229. doi:10.18429/JACoW-SRF2023-MOPMB050
[n] V. H. Gyurjyan, D. Abbott, W. G. Heyes, E. Jastrzembski, C. Timmer, and E. J. Wolin, “Ontology Language to Support Description of Experiment Control System Semantics, Collaborative Knowledge-Base Design, and Ontology Reuse”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEA002, pp. 361-363.
[n] A. Seville et al., “Progress on Dual Harmonic Acceleration on the ISIS Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH114, pp. 309-311.
[n] F. Furuta et al., “HF Free Bipolar Electro-Polishing Studies on Niobium SRF Cavities at Cornell With Faraday Technology”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2443-2446. doi:10.18429/JACoW-IPAC2018-WEPMF037
[n] P. Huelsmann, H.-W. Glock, H. Klein, and M. Kurz, “Determination of Field Strength and Quality Factor of Heavily HOM Damped Accelerator Cavities”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1307-1310.
[n] J. Cerino et al., “A Study of SPEAR as a Dedicated Source of Synchrotron Radiation”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1003-1006.
[n] M. Browman, T. Barts, P. Friedrichs, and G. Spalek, “Studies of the Four-Rod RFQ Using the MAFIA Codes”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-33, pp. 119-121.
[n] C. Diao and H. O. Moser, “Numerical study of field errors due to mechanical tolerances in superconducting miniundulators”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA061, pp. 711-713.
[n] F. H. Schmidt, “External Beam Focusing System”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59F02, pp. 257-261.
[n] Z. D. Farkas, G. Spalek, and P. B. Wilson, “RF Pulse Compression Experiment at SLAC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 132-135.
[n] K. Agari, Y. Morino, Y. Sato, and A. Toyoda, “Upgrades of Temperature Measurements and Interlock System for the Production Target at J-PARC Hadoron Experimental Facility”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 371-373. doi:10.18429/JACoW-ICALEPCS2015-MOPGF123
[n] H. F. Weehuizen, R. K. Fisch, M. E. Hogan, I. H. Kohler, and P. J. Theron, “The Present Status of the NAC Control System”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-42, pp. 326-329.
[n] Z. Zaharieva and M. Buttner, “CERN Alarms Data Management: State & Improvements”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN011, pp. 110-113.
[n] M. Di Carlo et al., “CI-CD Practices with the TANGO-controls Framework in the Context of the Square Kilometre Array (SKA) Telescope Project”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 114. doi:10.18429/JACoW-ICALEPCS2019-MOCPR05
[n] L. T. Sun et al., “Intense Beam Production with SuSI”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOCOAK02, pp. 4-7.
[n] H. T. Ren et al., “Commissioning of the FRIB RFQ”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1090-1093. doi:10.18429/JACoW-IPAC2018-TUPAL039
[n] J. Aron et al., “Status Report on the ATLAS Superconducting Linear Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0017, pp. 132-134.
[n] A. Rai et al., “Operational Experience with the IUAC Linac”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO025, pp. 244-248.
[n] P. B. Wilson et al., “Bunch Lengthening and Related Effects in SPEAR II”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1211-1215.
[n] H. Winick, “SSRL: Past Experience, Present Development, Future Plans”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3798-3801.
[n] M. Martino, A. Beloglazov, V. Nassisi, and V. Stagno, “Experimental Characterisations of the Electron Beams Induced by Excimer Lasers on A1 Targets”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1474-1477.
[n] T. Gromme et al., “Slow Feedback Systems for PEP-II”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A15, pp. 1897-1899.
[n] K. Boyer, “Variable Frequency in the Los Alamos Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59C07, pp. 171-173.
[n] M. Farkhondeh, R. Averill, W. W. Sapp, and J. D. Zumbro, “Low-sextupole Steering Dipoles for the MIT-Bates SHR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2348-2351.
[n] E. G. Stern, J. F. Amundson, and A. Macridin, “Suppression of Instabilities Generated by an Anti-Damper With a Nonlinear Magnetic Element in IOTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3134-3136. doi:10.18429/JACoW-IPAC2018-THPAF068
[n] J. Haimson and B. Mecklenburg, “Design and Construction of a Chopper Driven 11.4 GHz Traveling Wave RF Generator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 243-246.
[n] W. J. Corbett, A. M. Kiss, M. J. Boland, and C. L. Li, “Characterization of Visible Synchrotron Radiation Polarization at SPEAR3”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1240-1242. doi:10.18429/JACoW-IPAC2015-MOPWI035
[n] I. D. Valova, “Evaluation of OLAP Model Using Intuitionistic Fuzzy (IF) Logic”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP099, pp. XX-XX.
[n] V. Karpenko et al., “Mechanical Design of Recirculating Accelerator Experiments for Heavy-Ion Fusion”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR17, pp. 837-839.
[n] E. L. Kelly, “Session II Summary”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59B01, pp. 85-86.
[n] Z. Makonnen, M. Buttner, and Z. Zaharieva, “Challenges to Providing a Successful Central Configuration Service to Support CERN's New Controls Diagnostics and Monitoring System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC024, pp. 596-599.
[n] M. Misiowiec, W. Buczak, and M. Buttner, “Towards High Performance Processing in Modern Java Based Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRBHMUST02, pp. 1322-1325.
[n] R. L. Sheffield, C. W. Barnes, M. A. Bourke, R. W. Garnett, M. S. Gulley, and A. J. Taylor, “Pre-Conceptual Design Requirements for an X-Ray Free Electron Laser for the MaRIE Experimental Facility at LANL”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP163, pp. 2417-2419.
[n] A. Halavanau and P. Piot, “Numerical Investigation of a Cascaded Longitudinal Space-Charge Amplifier at the Fermilab's Advanced Superconducting Test Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1850-1852. doi:10.18429/JACoW-IPAC2015-TUPMA007
[n] J. A. Clarke et al., “Status of the UK Superconducting Planar Undulator Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA062, pp. 2259-2261.
[n] A. J. Venter, “ICALEPCS 2023”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper FRZL01, unpublished.
[n] R. J. Pasquinelli et al., “Progress in Antiproton Production at the Fermilab Tevatron Collider”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP075, pp. 1463-1465.
[n] S. Szustkowski, M. A. Jaworski, and D. C. Moir, “Foil Focusing Effect in Pepper-Pot Measurements in Intense Electron Beams”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 404-406. doi:10.18429/JACoW-IPAC2022-MOPOPT062
[n] D. Gorelov, T. L. Grimm, S. U. De Silva, and J. R. Delayen, “Engineering of a Superconducting 400 MHz Crabbing Cavity for the LHC HiLumi Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC085, pp. 2411-2413.
[n] C. J. Richard, S. Cogan, and S. M. Lidia, “Bunch Length Measurements Using Beam Position Monitors”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper TUPP20, unpublished.
[n] H. Kapitza, P. G?Âttlicher, N. Heidbrook, and H. Schlarb, “FEL Disturbance by Ambient Magnetic Field Changes”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH012, pp. 74-76.
[n] J. F. DeFord, B. Held, and J. J. Petillo, “Adaptive Mesh Refinement for Particle-Tracking Calculation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS047, pp. 3600-3602.
[n] M. Baltay, P. Hamann, W. Sattler, and J. Spencer, “Comparison of SmCo and NdFeB in PM Mulitpoles”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1431-1434.
[n] W. W. Mackay et al., “AGS to RHIC Transfer Line: Design and Commissioning”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP005G, pp. 2376-2378.
[n] A. I. Yavin, “Multi-Purpose Magnetic Particle Analyzer”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59F06, pp. 272-288.
[n] K. Manukyan, I. A. Abid, M. Attal, M. Ebbeni, and E. Huttel, “Single Dipole Kicker Injection Into the Sesame Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1463-1465. doi:10.18429/JACoW-IPAC2017-TUPAB062
For LaTeX
Use Complete Form
For BibTeX
References
- C. S. Hopper and J. R. Delayen, “Higher Order Mode Damping in Superconducting Spoke Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2669-2671.
- E. Laface, R. Ostojic, C. Santoni, W. Scandale, and D. Tommasini, “Interaction Region with Slim Quadrupoles”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH044, pp. 2014-2016.
- J. Christie, L. Corner, J. Henderson, and E. Snedden, “Developing a two-colour all-fibre balanced optical cross-correlator for sub-femtosecond synchronisation”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA073, pp. 4135-4138.
- G. Balik et al., “Active Vibration Isolation System for CLIC Final Focus”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1775-1777.
- Z. Ni, J. Liu, J. Luo, and X. Zhou, “The Design of Tango Based Centralized Management Platform for Software Devices”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1121-1124.
- M. W. McMullin, T. Junginger, P. Kolb, R. E. Laxdal, and Z. Y. Yao, “Thermal Feedback in Coaxial SRF Cavities”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB050, pp. 224-229.
- V. H. Gyurjyan, D. Abbott, W. G. Heyes, E. Jastrzembski, C. Timmer, and E. J. Wolin, “Ontology Language to Support Description of Experiment Control System Semantics, Collaborative Knowledge-Base Design, and Ontology Reuse”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEA002, pp. 361-363.
- A. Seville et al., “Progress on Dual Harmonic Acceleration on the ISIS Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH114, pp. 309-311.
- F. Furuta et al., “HF Free Bipolar Electro-Polishing Studies on Niobium SRF Cavities at Cornell With Faraday Technology”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2443-2446.
- P. Huelsmann, H.-W. Glock, H. Klein, and M. Kurz, “Determination of Field Strength and Quality Factor of Heavily HOM Damped Accelerator Cavities”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1307-1310.
- J. Cerino et al., “A Study of SPEAR as a Dedicated Source of Synchrotron Radiation”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1003-1006.
- M. Browman, T. Barts, P. Friedrichs, and G. Spalek, “Studies of the Four-Rod RFQ Using the MAFIA Codes”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-33, pp. 119-121.
- C. Diao and H. O. Moser, “Numerical study of field errors due to mechanical tolerances in superconducting miniundulators”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA061, pp. 711-713.
- F. H. Schmidt, “External Beam Focusing System”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59F02, pp. 257-261.
- Z. D. Farkas, G. Spalek, and P. B. Wilson, “RF Pulse Compression Experiment at SLAC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 132-135.
- K. Agari, Y. Morino, Y. Sato, and A. Toyoda, “Upgrades of Temperature Measurements and Interlock System for the Production Target at J-PARC Hadoron Experimental Facility”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 371-373.
- H. F. Weehuizen, R. K. Fisch, M. E. Hogan, I. H. Kohler, and P. J. Theron, “The Present Status of the NAC Control System”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-42, pp. 326-329.
- Z. Zaharieva and M. Buttner, “CERN Alarms Data Management: State & Improvements”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN011, pp. 110-113.
- M. Di Carlo et al., “CI-CD Practices with the TANGO-controls Framework in the Context of the Square Kilometre Array (SKA) Telescope Project”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 114.
- L. T. Sun et al., “Intense Beam Production with SuSI”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOCOAK02, pp. 4-7.
- H. T. Ren et al., “Commissioning of the FRIB RFQ”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1090-1093.
- J. Aron et al., “Status Report on the ATLAS Superconducting Linear Accelerator”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0017, pp. 132-134.
- A. Rai et al., “Operational Experience with the IUAC Linac”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO025, pp. 244-248.
- P. B. Wilson et al., “Bunch Lengthening and Related Effects in SPEAR II”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1211-1215.
- H. Winick, “SSRL: Past Experience, Present Development, Future Plans”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3798-3801.
- M. Martino, A. Beloglazov, V. Nassisi, and V. Stagno, “Experimental Characterisations of the Electron Beams Induced by Excimer Lasers on A1 Targets”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1474-1477.
- T. Gromme et al., “Slow Feedback Systems for PEP-II”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2A15, pp. 1897-1899.
- K. Boyer, “Variable Frequency in the Los Alamos Cyclotron”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59C07, pp. 171-173.
- M. Farkhondeh, R. Averill, W. W. Sapp, and J. D. Zumbro, “Low-sextupole Steering Dipoles for the MIT-Bates SHR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2348-2351.
- E. G. Stern, J. F. Amundson, and A. Macridin, “Suppression of Instabilities Generated by an Anti-Damper With a Nonlinear Magnetic Element in IOTA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3134-3136.
- J. Haimson and B. Mecklenburg, “Design and Construction of a Chopper Driven 11.4 GHz Traveling Wave RF Generator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 243-246.
- W. J. Corbett, A. M. Kiss, M. J. Boland, and C. L. Li, “Characterization of Visible Synchrotron Radiation Polarization at SPEAR3”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1240-1242.
- I. D. Valova, “Evaluation of OLAP Model Using Intuitionistic Fuzzy (IF) Logic”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP099, pp. XX-XX.
- V. Karpenko et al., “Mechanical Design of Recirculating Accelerator Experiments for Heavy-Ion Fusion”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR17, pp. 837-839.
- E. L. Kelly, “Session II Summary”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59B01, pp. 85-86.
- Z. Makonnen, M. Buttner, and Z. Zaharieva, “Challenges to Providing a Successful Central Configuration Service to Support CERN's New Controls Diagnostics and Monitoring System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC024, pp. 596-599.
- M. Misiowiec, W. Buczak, and M. Buttner, “Towards High Performance Processing in Modern Java Based Control Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRBHMUST02, pp. 1322-1325.
- R. L. Sheffield, C. W. Barnes, M. A. Bourke, R. W. Garnett, M. S. Gulley, and A. J. Taylor, “Pre-Conceptual Design Requirements for an X-Ray Free Electron Laser for the MaRIE Experimental Facility at LANL”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP163, pp. 2417-2419.
- A. Halavanau and P. Piot, “Numerical Investigation of a Cascaded Longitudinal Space-Charge Amplifier at the Fermilab's Advanced Superconducting Test Accelerator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1850-1852.
- J. A. Clarke et al., “Status of the UK Superconducting Planar Undulator Project”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA062, pp. 2259-2261.
- A. J. Venter, “ICALEPCS 2023”, presented at the 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, paper FRZL01, unpublished.
- R. J. Pasquinelli et al., “Progress in Antiproton Production at the Fermilab Tevatron Collider”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP075, pp. 1463-1465.
- S. Szustkowski, M. A. Jaworski, and D. C. Moir, “Foil Focusing Effect in Pepper-Pot Measurements in Intense Electron Beams”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 404-406.
- D. Gorelov, T. L. Grimm, S. U. De Silva, and J. R. Delayen, “Engineering of a Superconducting 400 MHz Crabbing Cavity for the LHC HiLumi Upgrade”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC085, pp. 2411-2413.
- C. J. Richard, S. Cogan, and S. M. Lidia, “Bunch Length Measurements Using Beam Position Monitors”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper TUPP20, unpublished.
- H. Kapitza, P. G?Âttlicher, N. Heidbrook, and H. Schlarb, “FEL Disturbance by Ambient Magnetic Field Changes”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH012, pp. 74-76.
- J. F. DeFord, B. Held, and J. J. Petillo, “Adaptive Mesh Refinement for Particle-Tracking Calculation”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS047, pp. 3600-3602.
- M. Baltay, P. Hamann, W. Sattler, and J. Spencer, “Comparison of SmCo and NdFeB in PM Mulitpoles”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1431-1434.
- W. W. Mackay et al., “AGS to RHIC Transfer Line: Design and Commissioning”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP005G, pp. 2376-2378.
- A. I. Yavin, “Multi-Purpose Magnetic Particle Analyzer”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59F06, pp. 272-288.
- K. Manukyan, I. A. Abid, M. Attal, M. Ebbeni, and E. Huttel, “Single Dipole Kicker Injection Into the Sesame Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1463-1465.
Back to search