Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. David, J. Jacob, J. Meyer, A. Panzarella, J.-L. Pons, and J.-L. Revol, “An Object Oriented Control System for the Third Storage Ring RF Unit at the ESRF”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP04C, pp. 1688-1690.
[n] M. V. Zumbro et al., “DARHT Second Axis - Status and Plans”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU406, pp. 314-316.
[n] C. Mitsuda et al., “Newly Development of Ceramics Chamber with Integrated Pulsed Magnet for Super-Narrow Bore in KEK-PF”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4524-4527. doi:10.18429/JACoW-IPAC2021-FRXB04
[n] M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 191-193. doi:10.18429/JACoW-MEDSI2016-TUPE14
[n] K. Yu, S. W. Quan, W. Xu, K. Zhao, F. Zhu, and J. Zhuang, “The PKU Terahertz Facility at Peking University”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP036, pp. 2343-2345.
[n] A. Chan et al., “The PEP-II Project-Wide Database”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR18, pp. 840-842.
[n] X. Li, X. He, and W. Wang, “Research on hydrostatic leveling system to provide elevation constraints for control network adjustment”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3826-3829. doi:10.18429/JACoW-IPAC2023-WEPM110
[n] A. V. Bakhmutova, A. Golubev, A. V. Kantsyrev, and N. V. Markov, “Development of the Beam Diagnostic System for the Radiobiological Research at the Proton Linear Accelerator I-2”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 508-510. doi:10.18429/JACoW-RUPAC2016-WEPSB065
[n] P. Gurd, F. Casagrande, M. McCarthy, W. H. Strong, and V. Ganni, “The Development of Automatic Sequences for the RF and Cryogenic Systems at the Spallation Neutron Source”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_014.
[n] N. Akaoka et al., “Development of a Proton Accelerator for the JAERI Neutron Science Project”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA68, pp. 3546-3548.
[n] J. J. Song, J. Kim, R. Otocki, and J. Zhou, “RF Radiation Measurement for the Advanced Photon Source (APS) Personnel Safety System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA11, pp. 2102-2104.
[n] H. Morales Zimmermann, K. Escherich, L. Lilje, A. Matheisen, B. Petersen, and N. Steinhau-K??hl, “Process Control and Web Based Software Set-up for the DESY Electropolishing Infrastructure”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP54, pp. 473-475.
[n] K. Whitham et al., “200 MeV RF Linac for Synchrotron Injection”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-05, pp. 615-617.
[n] J. Qiang and R. D. Ryne, “Parallel Optimization of Beam-Beam Effects in High Energy Colliders”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP152, pp. 1770-1772.
[n] J. D. Smith and S. Ramamoorthy, “NSLS Control Monitor and Its Upgrade”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1849-1852.
[n] C. Steier et al., “Intra-Beam Scattering and Minimum Achievable Emittance in the Advanced Light Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH039, pp. 2938-2940.
[n] I. Verstovsek et al., “Abeans: Application Development Framework for Java”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE203, pp. XX-XX.
[n] S. A. Heifets, S. A. Kheifets, and B. Woo, “Transverse EM Fields in a Detuned X-band Accelerating Structure”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPC18, pp. 2351-2352.
[n] A. Friedman et al., “Progress Toward a Prototype Recirculating Induction Accelerator for Heavy-Ion Fusion”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR14, pp. 828-830.
[n] A. A. Drozdovsky et al., “Measurement of the Electron Beam Spectrum by the Absorbing Filters Method During a Single Pulse”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 430-432. doi:10.18429/JACoW-RuPAC2021-WEPSC45
[n] L. Emery, P. S. Kallakuri, R. R. Lindberg, and A. Xiao, “Validation of APS-U Beam Dynamics Using 6-GeV APS Beam”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 189-192. doi:10.18429/JACoW-IPAC2021-MOPAB043
[n] A. Xiao and L. Emery, “International Linear Collider Damping Ring Lattice Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN097, pp. 3450-3452.
[n] B. R. Reichardt, D. Domont-Yankulova, H. Klingbeil, and D. E. M. Lens, “Tuning of 3-tap Bandpass Filter During Acceleration for Longitudinal Beam Stabilization at FAIR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4866-4868. doi:10.18429/JACoW-IPAC2018-THPML089
[n] N. Steinhau-K??hl et al., “Electro Polishing at DESY”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP46, pp. 442-446.
[n] R. Althaus et al., “Training of LBL-SSC Model Dipole Magnets at 1.8K”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1780-1783.
[n] A. Gabriel et al., “Design and Testing of a High-Gradient mm-Wave Accelerator Prototype”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA058, unpublished.
[n] M. Broseta et al., “Embedded Control System for Programmable Multi-Purpose Instruments”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 80-83. doi:10.18429/JACoW-PCAPAC2016-THDAPLCO01
[n] C. Xu et al., “Design of an Ultra-Compact Stripline BPM Receiver using MicroTCA for LCLS-II at SLAC”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC23, pp. 731-734.
[n] S. K. Esin, T. N. Habibullin, L. V. Kravchuk, V. V. Peplov, V. A. Puntus, and G. V. Romanov, “Adjustment of Meson Factory Linac 991-MHz Accelerating System”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 506-509.
[n] S. Dobrovolsky and N. F. Shul, “Transition and Diffraction Radiation by Relativistic Electrons in a Pre-Wave-Zone”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI107, pp. 1867-1869.
[n] S. Reimann, “Online Optimization of the Transfer Line from UNILAC towards SIS18 at GSI Using a Genetic Autotune Algorithm”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 922-924. doi:10.18429/JACoW-IPAC2022-TUPOST031
[n] T. Obina et al., “Present status and future project of Synchrotron Light Sources at KEK”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1286-1289. doi:10.18429/JACoW-IPAC2024-TUPG29
[n] J. W. Hurd et al., “Commissioning Plans for SSC Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-53, pp. 462-464.
[n] K. Fuchsberger and Y. I. Levinsen, “PYMAD – Integration of MADX in PYTHON”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC119, pp. 2289-2291.
[n] R. L. Warnock and J. C. Bergstrom, “Coherent Radiation in Whispering Gallery Modes”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP119, pp. 1710-1712.
[n] R. Lambiase, “Application of the Superconducting Power Cables in the RHIC Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP06F, pp. 2068-2069.
[n] T. Houck, M. Garcia, and S. Sampayan, “Faraday Cup Measurements of the Plasma Plume Produced at an X-ray Converter”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4102, pp. 311-313.
[n] R. L. Warnock, Y. Cai, and J. A. Ellison, “Construction of Large-Period Symplectic Maps by Interpolative Methods”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper MO3IOPK04, pp. 6-11.
[n] B. B. Pollock et al., “The Effects of a Density Mismatch in a Two-State LWFA”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOBS3, pp. 1421-1423.
[n] C. Biino et al., “Record Deflection Efficiencies Measured for High Energy Protons in a Bent Germanium Crystal”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2B010, pp. 80-82.
[n] J. Stovall and K. Crandall, “Quadrupole Field Aberrations: A Source of Emittance Growth at LAMPF”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper PUB13, pp. 409-409.
[n] K.-B. Liu, J. C. Hsu, K. T. Hsu, Y. D. Li, and B. S. Wang, “TPS Corrector Magnet Power Converter”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD073, pp. 3269-3271.
[n] J. Qiang, I. V. Pogorelov, and R. D. Ryne, “Recent Improvements to the IMPACT-T Parallel Particle Tracking Code”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEPPP02, pp. 185-187.
[n] J. J. Back, “Physics Studies for the LBNF Graphite Target Design”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3123-3125. doi:10.18429/JACoW-IPAC2021-WEPAB212
[n] C. Yao, M. Borland, and B. X. Yang, “Observation of +1 Bucket Bunch Impurity Growth at the APS Storage Ring”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA04, pp. 598-600.
[n] N. Y. Na et al., “Design and Simulation of the High-Sensitivity Tune Measurement System Based on Diode Detection at HIAF”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper WEP037, unpublished.
[n] M. Quispe et al., “Assessment of the Corrosion of Copper Components in the Water Cooling System of ALBA Synchrotron Light Source; Presentation of a Proposal to Mitigate the Corrosion Rate of Copper”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 171. doi:10.18429/JACoW-MEDSI2020-TUPB12
[n] R. I. Cutler and L. Young, “Performance of the High Power RF System for the NIST - Los Alamos Racetrack Microtron”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-19, pp. 574-576.
[n] X. Huang, V. Sajaev, Y. P. Sun, and A. Xiao, “Linear Optics Measurement for the APS Ring with Turn-by-Turn BPM Data”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 707-710. doi:10.18429/JACoW-IPAC2021-MOPAB214
[n] A. Sen, S. Brandenburg, M. A. Hofstee, and M. J. van Goethem, “Vacuum Simulation for Heavy Ion Beams in the AGOR-Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP083, pp. 221-223.
[n] L. Tkachenko et al., “Development of Fast-Cycling Superconducting Quadrupole and Corrector Magnets for the SIS 300”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHC02, pp. 300-302.
[n] V. H. Ranjbar, D. T. Abell, I. Ben-Zvi, J. Kewisch, K. Paul, and R. D. Ryne, “Impact of Magnet Misalignment in an ERL for Electron Cooling in RHIC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC069, pp. 3146-3148.
[n] C. Belver-Aguilar and M. J. Barnes, “Transient Studies of the Stripline Kicker for Beam Extraction from CLIC Damping Rings”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 35-38. doi:10.18429/JACoW-IBIC2016-MOPG05
[n] G. Strangolino and C. Scafuri, “Mango: an Online GUI Development Tool for the Tango Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS022, pp. 833-835.
[n] S. A. Smith, C. Haddock, R. Jayakumar, J. Turner, and J. Zbasnik, “Mechanical Analysis of Beam Tube Assemblies for SSC Dipoles During a Quench”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2206-2209.
[n] J. H. Wei, N. Baboi, and T. Hellert, “Cavity Tilt Measurement in a 1.3 GHz Superconducting Cryo-Module at FLASH”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1041-1044. doi:10.18429/JACoW-SRF2019-THP067
[n] S. Adam, “The Isochronism in the SIN 590-MeV Ring Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-16, pp. 283-286.
[n] I. Bogdanov et al., “QUENCH PROCESS IN FAST-CYCLING SUPERCONDUCTING DIPOLE FOR SIS300”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP01, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- C. David, J. Jacob, J. Meyer, A. Panzarella, J.-L. Pons, and J.-L. Revol, “An Object Oriented Control System for the Third Storage Ring RF Unit at the ESRF”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP04C, pp. 1688-1690.
- M. V. Zumbro et al., “DARHT Second Axis - Status and Plans”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU406, pp. 314-316.
- C. Mitsuda et al., “Newly Development of Ceramics Chamber with Integrated Pulsed Magnet for Super-Narrow Bore in KEK-PF”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4524-4527.
- M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 191-193.
- K. Yu, S. W. Quan, W. Xu, K. Zhao, F. Zhu, and J. Zhuang, “The PKU Terahertz Facility at Peking University”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP036, pp. 2343-2345.
- A. Chan et al., “The PEP-II Project-Wide Database”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR18, pp. 840-842.
- X. Li, X. He, and W. Wang, “Research on hydrostatic leveling system to provide elevation constraints for control network adjustment”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM110, pp. 3826-3829.
- A. V. Bakhmutova, A. Golubev, A. V. Kantsyrev, and N. V. Markov, “Development of the Beam Diagnostic System for the Radiobiological Research at the Proton Linear Accelerator I-2”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 508-510.
- P. Gurd, F. Casagrande, M. McCarthy, W. H. Strong, and V. Ganni, “The Development of Automatic Sequences for the RF and Cryogenic Systems at the Spallation Neutron Source”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_014.
- N. Akaoka et al., “Development of a Proton Accelerator for the JAERI Neutron Science Project”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA68, pp. 3546-3548.
- J. J. Song, J. Kim, R. Otocki, and J. Zhou, “RF Radiation Measurement for the Advanced Photon Source (APS) Personnel Safety System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA11, pp. 2102-2104.
- H. Morales Zimmermann, K. Escherich, L. Lilje, A. Matheisen, B. Petersen, and N. Steinhau-K??hl, “Process Control and Web Based Software Set-up for the DESY Electropolishing Infrastructure”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP54, pp. 473-475.
- K. Whitham et al., “200 MeV RF Linac for Synchrotron Injection”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-05, pp. 615-617.
- J. Qiang and R. D. Ryne, “Parallel Optimization of Beam-Beam Effects in High Energy Colliders”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP152, pp. 1770-1772.
- J. D. Smith and S. Ramamoorthy, “NSLS Control Monitor and Its Upgrade”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1849-1852.
- C. Steier et al., “Intra-Beam Scattering and Minimum Achievable Emittance in the Advanced Light Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH039, pp. 2938-2940.
- I. Verstovsek et al., “Abeans: Application Development Framework for Java”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE203, pp. XX-XX.
- S. A. Heifets, S. A. Kheifets, and B. Woo, “Transverse EM Fields in a Detuned X-band Accelerating Structure”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPC18, pp. 2351-2352.
- A. Friedman et al., “Progress Toward a Prototype Recirculating Induction Accelerator for Heavy-Ion Fusion”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR14, pp. 828-830.
- A. A. Drozdovsky et al., “Measurement of the Electron Beam Spectrum by the Absorbing Filters Method During a Single Pulse”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 430-432.
- L. Emery, P. S. Kallakuri, R. R. Lindberg, and A. Xiao, “Validation of APS-U Beam Dynamics Using 6-GeV APS Beam”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 189-192.
- A. Xiao and L. Emery, “International Linear Collider Damping Ring Lattice Design”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN097, pp. 3450-3452.
- B. R. Reichardt, D. Domont-Yankulova, H. Klingbeil, and D. E. M. Lens, “Tuning of 3-tap Bandpass Filter During Acceleration for Longitudinal Beam Stabilization at FAIR”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4866-4868.
- N. Steinhau-K??hl et al., “Electro Polishing at DESY”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP46, pp. 442-446.
- R. Althaus et al., “Training of LBL-SSC Model Dipole Magnets at 1.8K”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1780-1783.
- A. Gabriel et al., “Design and Testing of a High-Gradient mm-Wave Accelerator Prototype”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA058, unpublished.
- M. Broseta et al., “Embedded Control System for Programmable Multi-Purpose Instruments”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 80-83.
- C. Xu et al., “Design of an Ultra-Compact Stripline BPM Receiver using MicroTCA for LCLS-II at SLAC”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC23, pp. 731-734.
- S. K. Esin, T. N. Habibullin, L. V. Kravchuk, V. V. Peplov, V. A. Puntus, and G. V. Romanov, “Adjustment of Meson Factory Linac 991-MHz Accelerating System”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 506-509.
- S. Dobrovolsky and N. F. Shul, “Transition and Diffraction Radiation by Relativistic Electrons in a Pre-Wave-Zone”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI107, pp. 1867-1869.
- S. Reimann, “Online Optimization of the Transfer Line from UNILAC towards SIS18 at GSI Using a Genetic Autotune Algorithm”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 922-924.
- T. Obina et al., “Present status and future project of Synchrotron Light Sources at KEK”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG29, pp. 1286-1289.
- J. W. Hurd et al., “Commissioning Plans for SSC Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-53, pp. 462-464.
- K. Fuchsberger and Y. I. Levinsen, “PYMAD – Integration of MADX in PYTHON”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC119, pp. 2289-2291.
- R. L. Warnock and J. C. Bergstrom, “Coherent Radiation in Whispering Gallery Modes”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP119, pp. 1710-1712.
- R. Lambiase, “Application of the Superconducting Power Cables in the RHIC Project”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP06F, pp. 2068-2069.
- T. Houck, M. Garcia, and S. Sampayan, “Faraday Cup Measurements of the Plasma Plume Produced at an X-ray Converter”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4102, pp. 311-313.
- R. L. Warnock, Y. Cai, and J. A. Ellison, “Construction of Large-Period Symplectic Maps by Interpolative Methods”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper MO3IOPK04, pp. 6-11.
- B. B. Pollock et al., “The Effects of a Density Mismatch in a Two-State LWFA”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOBS3, pp. 1421-1423.
- C. Biino et al., “Record Deflection Efficiencies Measured for High Energy Protons in a Bent Germanium Crystal”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2B010, pp. 80-82.
- J. Stovall and K. Crandall, “Quadrupole Field Aberrations: A Source of Emittance Growth at LAMPF”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper PUB13, pp. 409-409.
- K.-B. Liu, J. C. Hsu, K. T. Hsu, Y. D. Li, and B. S. Wang, “TPS Corrector Magnet Power Converter”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD073, pp. 3269-3271.
- J. Qiang, I. V. Pogorelov, and R. D. Ryne, “Recent Improvements to the IMPACT-T Parallel Particle Tracking Code”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEPPP02, pp. 185-187.
- J. J. Back, “Physics Studies for the LBNF Graphite Target Design”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3123-3125.
- C. Yao, M. Borland, and B. X. Yang, “Observation of +1 Bucket Bunch Impurity Growth at the APS Storage Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA04, pp. 598-600.
- N. Y. Na et al., “Design and Simulation of the High-Sensitivity Tune Measurement System Based on Diode Detection at HIAF”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP037, unpublished.
- M. Quispe et al., “Assessment of the Corrosion of Copper Components in the Water Cooling System of ALBA Synchrotron Light Source; Presentation of a Proposal to Mitigate the Corrosion Rate of Copper”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 171.
- R. I. Cutler and L. Young, “Performance of the High Power RF System for the NIST - Los Alamos Racetrack Microtron”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-19, pp. 574-576.
- X. Huang, V. Sajaev, Y. P. Sun, and A. Xiao, “Linear Optics Measurement for the APS Ring with Turn-by-Turn BPM Data”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 707-710.
- A. Sen, S. Brandenburg, M. A. Hofstee, and M. J. van Goethem, “Vacuum Simulation for Heavy Ion Beams in the AGOR-Cyclotron”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP083, pp. 221-223.
- L. Tkachenko et al., “Development of Fast-Cycling Superconducting Quadrupole and Corrector Magnets for the SIS 300”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THCHC02, pp. 300-302.
- V. H. Ranjbar, D. T. Abell, I. Ben-Zvi, J. Kewisch, K. Paul, and R. D. Ryne, “Impact of Magnet Misalignment in an ERL for Electron Cooling in RHIC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC069, pp. 3146-3148.
- C. Belver-Aguilar and M. J. Barnes, “Transient Studies of the Stripline Kicker for Beam Extraction from CLIC Damping Rings”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 35-38.
- G. Strangolino and C. Scafuri, “Mango: an Online GUI Development Tool for the Tango Control System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS022, pp. 833-835.
- S. A. Smith, C. Haddock, R. Jayakumar, J. Turner, and J. Zbasnik, “Mechanical Analysis of Beam Tube Assemblies for SSC Dipoles During a Quench”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2206-2209.
- J. H. Wei, N. Baboi, and T. Hellert, “Cavity Tilt Measurement in a 1.3 GHz Superconducting Cryo-Module at FLASH”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1041-1044.
- S. Adam, “The Isochronism in the SIN 590-MeV Ring Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-16, pp. 283-286.
- I. Bogdanov et al., “QUENCH PROCESS IN FAST-CYCLING SUPERCONDUCTING DIPOLE FOR SIS300”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP01, pp. XX-XX.
Back to search