Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. A. Caggiano et al., “Design of the Neutron Imaging Differential Pumping Line at LLNL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1312-1314. doi:10.18429/JACoW-IPAC2019-TUPMP033
[n] M. Kadunc et al., “Deployment of Abeans Release 3 for the TINE Control System at DESY”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP506, pp. XX-XX.
[n] J. Sikora, M. Billing, G. Codner, R. Meller, C. Strohman, and T. Pelaia, “Longitudinal Feedback at CESR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA19, pp. 1115-1117.
[n] M. Puglisi, “A Linear and Non Linear Analysis of High Power rf Amplifiers”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3411-3414.
[n] K. S. Lee, E. Klassen, M. M. Mouat, J. J. Pon, and P. J. Yogendran, “Experience Porting TRIUMF's 500 MeV Cyclotron Central Control System Software to Intel's 64 bit Itanium Running OpenVMS”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_092.
[n] T. Lavine, “Review of Pulsed RF Power Generation”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 302-307.
[n] G. Lopez, “Non Similarity Solution Approximation to the Thermal Hydraulic Quenchback in Superconductors”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2471-2474.
[n] J. Zhou, J. C. McNeur, G. Travish, and R. B. Yoder, “Fabrication of a Prototype Micro-Accelerator Platform”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP086, pp. 259-261.
[n] L. Ristori, M. H. Awida, I. V. Gonin, M. Merio, D. Passarelli, and V. P. Yakovlev, “Design of SSR1 Single Spoke Resonators for PXIE”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC057, pp. 2342-2344.
[n] A. Antoine, C. Boucly, P. Juteau, N. Magnin, and N. Voumard, “First Operational Experience with the LHC Beam Dump Trigger Synchronisation Unit”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU019, pp. 1100-1103.
[n] W. B. Sampson, “Superconducting Synchrotron Magnet Development at Brookhaven”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 634-636.
[n] H. Wang, T. E. Plawski, R. A. Rimmer, A. Dudas, and M. L. Neubauer, “Simulation and Experimental Studies of a 2.45GHz Magnetron Source for an SRF Cavity with Field Amplitude and Phase Controls”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 514-517. doi:10.18429/JACoW-IPAC2016-MOPMY002
[n] H. Hanerfeld, W. Herrmannsfeldt, and R. H. Miller, “Higher Order Correlations in Computed Particle Distributions”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 880-883.
[n] R. E. Laxdal et al., “Extraction Exploiting nu;r = 3/2: Optical and Technical Constraints on Performance”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper G-08, pp. 248-251.
[n] C. Pearson, A. Vlieks, G. Caryotakis, E. Jongewaard, R. M. Phillips, and D. Sprehn, “The Next Linear Collider Klystron Development Program”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA03, pp. 739-741.
[n] H. J. Kwon, K. H. Paek, K. J. Chung, C. Y. Kim, and K. H. Chung, “Klystron Power Supply for KOMAC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D017, pp. 118-120.
[n] G. Sterbini, S. Doebert, R. L. Lillestol, E. Marin, D. Schulte, and E. Adli, “Beam-based Alignment in CTF3 Test Beam Line”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR034, pp. 1894-1896.
[n] A. Puntambekar and M. G. Karmarkar, “Approach Towards Development of 350 MHz Bulk Niobium SCRF Cavities for 10MeV Prototyping Phase of the Proposed Proton LINAC”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP34, pp. 385-387.
[n] H. Li et al., “The Status of CSNS Front End”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 771-773. doi:10.18429/JACoW-LINAC2018-THPO039
[n] R. Giannini and P. Mandrillon, “On the Possibility of Accelerating Multiply Charged Ions in the CERN Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-07, pp. 609-613.
[n] C. A. Lindstrom, E. Adli, J. Pfingstner, E. Marin, and D. Schulte, “Transverse Tolerances of a Multi-Stage Plasma Wakefield Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2561-2564. doi:10.18429/JACoW-IPAC2016-WEPMY009
For LaTeX
Use Complete Form
For BibTeX
References
- J. A. Caggiano et al., “Design of the Neutron Imaging Differential Pumping Line at LLNL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1312-1314.
- M. Kadunc et al., “Deployment of Abeans Release 3 for the TINE Control System at DESY”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP506, pp. XX-XX.
- J. Sikora, M. Billing, G. Codner, R. Meller, C. Strohman, and T. Pelaia, “Longitudinal Feedback at CESR”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA19, pp. 1115-1117.
- M. Puglisi, “A Linear and Non Linear Analysis of High Power rf Amplifiers”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3411-3414.
- K. S. Lee, E. Klassen, M. M. Mouat, J. J. Pon, and P. J. Yogendran, “Experience Porting TRIUMF's 500 MeV Cyclotron Central Control System Software to Intel's 64 bit Itanium Running OpenVMS”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_092.
- T. Lavine, “Review of Pulsed RF Power Generation”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 302-307.
- G. Lopez, “Non Similarity Solution Approximation to the Thermal Hydraulic Quenchback in Superconductors”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2471-2474.
- J. Zhou, J. C. McNeur, G. Travish, and R. B. Yoder, “Fabrication of a Prototype Micro-Accelerator Platform”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP086, pp. 259-261.
- L. Ristori, M. H. Awida, I. V. Gonin, M. Merio, D. Passarelli, and V. P. Yakovlev, “Design of SSR1 Single Spoke Resonators for PXIE”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC057, pp. 2342-2344.
- A. Antoine, C. Boucly, P. Juteau, N. Magnin, and N. Voumard, “First Operational Experience with the LHC Beam Dump Trigger Synchronisation Unit”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU019, pp. 1100-1103.
- W. B. Sampson, “Superconducting Synchrotron Magnet Development at Brookhaven”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 634-636.
- H. Wang, T. E. Plawski, R. A. Rimmer, A. Dudas, and M. L. Neubauer, “Simulation and Experimental Studies of a 2.45GHz Magnetron Source for an SRF Cavity with Field Amplitude and Phase Controls”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 514-517.
- H. Hanerfeld, W. Herrmannsfeldt, and R. H. Miller, “Higher Order Correlations in Computed Particle Distributions”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 880-883.
- R. E. Laxdal et al., “Extraction Exploiting nu;r = 3/2: Optical and Technical Constraints on Performance”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper G-08, pp. 248-251.
- C. Pearson, A. Vlieks, G. Caryotakis, E. Jongewaard, R. M. Phillips, and D. Sprehn, “The Next Linear Collider Klystron Development Program”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THA03, pp. 739-741.
- H. J. Kwon, K. H. Paek, K. J. Chung, C. Y. Kim, and K. H. Chung, “Klystron Power Supply for KOMAC”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D017, pp. 118-120.
- G. Sterbini, S. Doebert, R. L. Lillestol, E. Marin, D. Schulte, and E. Adli, “Beam-based Alignment in CTF3 Test Beam Line”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR034, pp. 1894-1896.
- A. Puntambekar and M. G. Karmarkar, “Approach Towards Development of 350 MHz Bulk Niobium SCRF Cavities for 10MeV Prototyping Phase of the Proposed Proton LINAC”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP34, pp. 385-387.
- H. Li et al., “The Status of CSNS Front End”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 771-773.
- R. Giannini and P. Mandrillon, “On the Possibility of Accelerating Multiply Charged Ions in the CERN Synchro-Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-07, pp. 609-613.
- C. A. Lindstrom, E. Adli, J. Pfingstner, E. Marin, and D. Schulte, “Transverse Tolerances of a Multi-Stage Plasma Wakefield Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2561-2564.
Back to search