Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Pei et al., “R&D Studies on A 177.6 MHz 1:4 Scale Boat Shape Prototype RF Cavity for the 2 GeV CW FFA”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper THPO015, pp. 338-341. doi:10.18429/JACoW-CYCLOTRONS2022-THPO015
[n] L. H. Harwood and D. Johnson, “A Model for Calculating in Two Dimensions a Magnet with Repetitive Structure in the Third Dimension”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B22, pp. 99-100.
[n] C. Benjamin, D. Seal, G. Stenning, J. Conlon, O. Malyshev, and R. Valizadeh, “V₃Si: an alternative thin film material for superconducting RF cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2779-2781. doi:10.18429/JACoW-IPAC2024-WEPS39
[n] H. Duarte and F. Cullinan, “Performance of HOM dampers in the 100 MHz RF cavities in the MAX IV 3 GeV ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS064, unpublished.
[n] E. Esarey, R. F. Hubbard, W. P. Leemans, A. Ting, and P. Sprangle, “Femtosecond Electron Bunches from Colliding Laser Pulses in Plasmas”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3PC006, pp. XX-XX.
[n] N. C. Shipman et al., “In-situ Bulk Residual Resistivity Ratio Measurement on Double Quarter Wave Crab Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 415-419. doi:10.18429/JACoW-SRF2017-TUPB014
[n] F. Perez et al., “ALBA II accelerator upgrade project status”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1220-1223. doi:10.18429/JACoW-IPAC2024-TUPG02
[n] J. W. Hurd et al., “Commissioning Plans for SSC Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-53, pp. 462-464.
[n] S. Adam and J. C. Collins, “Automatic Centering and Matching of Cyclotron Beams”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-15, pp. 2362-2365.
[n] N. C. Shipman, G. Burt, R. Calaga, and J. A. Mitchell, “Method to Calculate the Longitudinal Impedance From a Partial Wakefield Simulation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3844-3846. doi:10.18429/JACoW-IPAC2017-THPAB057
[n] S. Adam, W. Joho, and C. J. Kost, “Longitudinal Space-Charge-Effects in the SIN Injector II and the SIN Ring Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-40, pp. 529-531.
[n] Y. Renier et al., “Statistics on High Average Power Operation and Results from the Electron Beam Characterization at PITZ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1806-1808. doi:10.18429/JACoW-IPAC2017-TUPIK051
[n] S. Cunningham, R. Clarken, and A. C. Starritt, “A Compact Weather Station for Monitoring Environmental Effects on Beam Properties and Equipment”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 30-32. doi:10.18429/JACoW-IBIC2015-MOPB002
[n] N. Ratcliffe and T. R. Edgecock, “A Study of Potential Accelerator Production of Radioisotopes for Both Diagnostics and Therapy”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4765-4767. doi:10.18429/JACoW-IPAC2017-THPVA132
[n] M. Martinello et al., “Toward Qualifications of HB and LB 650 MHz Cavities for the Prototype Cryomodules for the PIP-II Project”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 448. doi:10.18429/JACoW-SRF2021-TUPCAV005
[n] O. Ferrando and E. Karantzoulis, “Main Beam Dump Transfer Line for the FERMI@ELETTRA LINAC”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC10, pp. 255-257.
[n] E. S. Fischer et al., “Superconducting Magnets at FAIR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2546-2549. doi:10.18429/JACoW-IPAC2017-WEOCB2
[n] J. L. Erickson and R. W. Garnett, “Status of the Los Alamos Multi-Probe Facility for Matter-Radiation Interactions in Extremes”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 464-468. doi:10.18429/JACoW-NAPAC2016-TUB4IO01
[n] S. Zorzut, M. Cargnelutti, and S. Hunziker, “Influence of Environment Changes on Libera Sync 3 Long-term Stability”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 126-128. doi:10.18429/JACoW-FEL2015-MOP043
[n] A. Mandal, R. Kumar, G. Rodrigues, and S. K. Suman, “A Large Area Scanning Magnet For Homogeneous Irradiation of Targets”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA002, pp. 339-341.
[n] S. West, J. W. Gray, and A. Morris, “Upgrade of the ISIS Main Magnet Power Supply”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT144, pp. 1467-1469.
[n] D. Winklehner et al., “High Power Cyclotrons for Neutrino Experiments”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 788-790. doi:10.18429/JACoW-IPAC2014-MOPRI078
[n] H. Henke, “Diffraction Radiation of Charges Moving Past Conducting Screens”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 868-871.
[n] V. Kain et al., “Slow extracted spill ripple control in the CERN SPS using adaptive Bayesian optimisation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1790-1793. doi:10.18429/JACoW-IPAC2024-TUPS55
[n] A. Waghmare and J. Valladares, “LANSCE 805 MHz klystron design and performance”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB079, unpublished.
[n] T. A. Antaya, H. G. Blosser, and R. J. Burleigh, “Current Status of the ECR Ion Source Project at NSCL”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B48, pp. 184-187.
[n] H. Qin, R. C. Davidson, J. J. Barnard, M. Chung, and T.-S. F. Wang, “Theoretical Study of Transverse-Longitudinal Emmittance Coupling”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOCN5, pp. 758-760.
[n] M. G. Minty, R. Akre, F. J. Decker, and J. Turner, “Operation and Performance of Bunch Precompression for Increased Current Transmission at the SLC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3B013, pp. 1569-1571.
[n] G. von Holtey, “Electron Beam Collimation at LEP Energies”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1252-1255.
[n] N. Chaisueb and S. Rimjaem, “Study on Undulator Radiation from Femtosecond Electron Bunches”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 702-706. doi:10.18429/JACoW-FEL2015-WEP062
[n] A. M. Meseck, M. Abo-Bakr, and B. Kuske, “The Influence of the Seed Pulse Shape on the Output Performance of the BESSY Multi-stage HGHG-FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS06, pp. XX-XX.
[n] J.-P. Auclair, P.-A. Chamouard, and J.-L. Lemaire, “Limitations and Improvements of Heavy Ion Acceleration with a 20-MeV Proton Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S1-11, pp. 43-46.
[n] J. D. Mammosser et al., “Fabrication and Testing of Deflecting Cavities for APS”, in Proc. SRF'13, Paris, France, Sep. 2013, paper FRIOA03, pp. 1170-1175.
[n] P. Aguar Bartolome et al., “Testing of the First of Series Quadrupole Doublet Module for the SIS100 Synchrotron”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2409-2412. doi:10.18429/JACoW-IPAC2021-TUPAB380
[n] L. Rossa and M. Brendike, “EPICS Integration for Rapid Control Prototyping Hardware from Speedgoat”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1317-1321. doi:10.18429/JACoW-ICALEPCS2023-THPDP013
[n] A. C. A. Aro et al., “Microdosimetric Measurements on the Clatterbridge Proton Therapy Beam”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 271-274.
[n] N. T. Callaway, R. W. Garnett, K. W. Jones, M. A. Oothoudt, and B. D. Ray, “Availability Results for the LANSCE Accelerator Complex”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W023, pp. 1165-1167.
[n] S. Avsec, B. Jeram, G. Mavric, M. Plesko, and J. Stefan, “The Design of the Control System for ANKA”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P053, pp. 2481-2483.
[n] R. B. Chavan, S. Chandan, K. Dixit, K. C. Mittal, A. R. Tillu, and V. Yadav, “Overview of Control System for 30MeV RF Source”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD45, pp. 222-224.
[n] N. Gonzalez, C. Colldelram, J. B. Gonz?â, J. Juanhuix, J. Nicolas, and C. Ruget, “Compact Mirror Bender With Sub-Nanometer Adaptive Correction Control”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 371-373. doi:10.18429/JACoW-MEDSI2018-THPH16
[n] M. Dracos, “The European Spallation Source Neutrino Super Beam Design Study”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1702-1705. doi:10.18429/JACoW-IPAC2018-TUPML068
[n] ?ü. Freitas, V. Hardion, M. Lindberg, R. Lindvall, R. Sv?ñrd, and C. Takahashi, “Control System Suite for Beam Position Monitors at MAX IV”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 496-499. doi:10.18429/JACoW-IBIC2022-WEP38
[n] P. S. Miller, H. G. Blosser, D. Gossman, B. Jeltema, D. Johnson, and P. Marchand, “Magnetic Field Measurements in the MSU MeV Superconducting Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-15, pp. 2111-2113.
[n] G. Ciovati et al., “Cavity Production and Testing of the First C75 Cryomodule for CEBAF”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 250. doi:10.18429/JACoW-SRF2021-MOPCAV001
[n] M. Bassetti et al., “Status Report on the Wiggler Magnet for Adone”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3863-3865.
[n] A. S. Sharma, S. Acharya, U. Kumar, G. R. Nagabhushana, and K. V. Nagesh, “Characterisation of Amorphous Magnetic Material with Multiple Pulse Excitation”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA070, pp. 732-734.
[n] J. M. Brennan et al., “RF Beam Control System for the Brookhaven Relativistic Heavy Ion Collider, RHIC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP02G, pp. 1705-1707.
[n] F. A. Heyn and T. K. Khoe, “Design and Performance of a 12-MeV Isochronous Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A08, pp. 29-39.
[n] M. Popovic, L. Allen, and C. W. Schmidt, “Fermilab Linac Injector, Revisited”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPA06, pp. 917-919.
[n] R. Valc?â, C. Colldelram, N. Gonzalez, E. Pereiro, A. J. Perez-Berna, and A. Sorrentino, “New Holder for Dual-Axis Cryo Soft X-Ray Tomography of Cells at the Mistral Beamline”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 427-429. doi:10.18429/JACoW-MEDSI2018-THPH43
[n] N. Holmberg et al., “Time Synchronization and Timestamping for the ESS Neutron Instruments”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1250-1255. doi:10.18429/JACoW-ICALEPCS2023-THMBCMO24
[n] O. Ferrando and G. D'Auria, “Longitudinal Beam Dynamics Studies for the FERMI@ELETTRA Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC012, pp. 2999-3001.
[n] Z. Qian, M. Champion, H. W. Miller, A. Moretti, and R. Padilla, “Final Module Tuning of the 805 MHz Side-Coupled Cavities for the Fermilab Linac Upgrade”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-44, pp. 422-424.
[n] G. Rodrigues et al., “HTS-ECRIS and Low Energy Beam Transport System of the High Current Injector”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA078, pp. 434-436.
[n] M. Modica et al., “Preliminary thermal load calculations of superconducting deflecting cavities for ELETTRA 2.0”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper THP68, unpublished.
[n] C. J. Densham et al., “Design of the T2K Target for a 0.75-MW Proton Beam”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO2A01, pp. 560-562.
[n] L. Giannessi et al., “FEL Experiments at SPARC”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUPB18, pp. 294-297.
[n] D. J. Clark et al., “Design and Construction of the Axial Injection System for the 88 - Inch Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 471-474.
[n] J. A. Benjamin, “Selection of a Vac-Ion Pump for a Terminal Ion Source”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 107-109.
[n] Y. Iwata et al., “Alternating-Phase-Focused Linac with Interdigital H-Mode Structure for Medical Injectors”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP007, pp. 1084-1086.
[n] E.-C. Huang, P. Anisimov, and L. Rybarcyk, “Benchmarking HPSim with the LANSCE Linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2480-2482. doi:10.18429/JACoW-IPAC2023-TUPM112
[n] F. M. Nortier, J. W. Lenz, J. W. Lenz, P. A. Smith P, and A. Smith Concepts, “Large-Scale Isotope Production With An Intense 100 Mev Proton Beam: Recent Target Performance Experience”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 257-259.
[n] P. L. Lemut, S. Zorzut, B. Batagelj, J. Tratnik, and M. Leskovec, “Evaluation of Short and Long-Term Stability of the 2998 MHz Reference-Clock Transfer System”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG009, pp. 41-43.
[n] J. Ohnishi, “CONSTRUCTION STATUS OF THE RIKEN INTERMEDIATE-STAGE RING CYCLOTRON (IRC)”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P14, pp. XX-XX.
[n] J. E. Petersson, T. Bögershausen, N. Holmberg, M. Olsson, T. S. Richter, and F. Rojas, “Characterizing Motion Control Systems to Enable Accurate Continuous and Event-Based Scans”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1431-1434. doi:10.18429/JACoW-ICALEPCS2023-THPDP052
[n] R. Fullwood, W. A. Bryant, and D. E. Kraus, “Electronic Instrumentation at the RPI Linac”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 530-535.
[n] M. Di Carlo et al., “Tm Services: An Architecture for Monitoring and Controlling the Square Kilometre Array (SKA) Telescope Manager (Tm)”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 943-947. doi:10.18429/JACoW-ICALEPCS2017-TUPHA207
[n] Y. E. Tan et al., “Commissioning of the Fast Orbit Feedback System at the Australian Synchrotron”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1770-1773. doi:10.18429/JACoW-IPAC2017-TUPIK040
[n] J. C. Collins et al., “Computer Control Strategies at SIN”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-08, pp. 2337-2340.
[n] R. B. Chavan et al., “Fiber Optic Control for Electron Gun Power Supplies of 3MeV DC Accelerator”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP023, pp. XX-XX.
[n] F. Hornstra, A. Brescia, M. Knott, and C. Swoboda, “On-Line Computer Monitoring and Optimization of a Multiple Target Proton Beam Line”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 823-827.
[n] E. Sabia, G. Dattoli, A. Dipace, and C. R. Frascati, “Towards A Self Sustained Free Electron Laser Device”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP064, pp. 1232-1234.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Pei et al., “R&D Studies on A 177.6 MHz 1:4 Scale Boat Shape Prototype RF Cavity for the 2 GeV CW FFA”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper THPO015, pp. 338-341.
- L. H. Harwood and D. Johnson, “A Model for Calculating in Two Dimensions a Magnet with Repetitive Structure in the Third Dimension”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B22, pp. 99-100.
- C. Benjamin, D. Seal, G. Stenning, J. Conlon, O. Malyshev, and R. Valizadeh, “V₃Si: an alternative thin film material for superconducting RF cavities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS39, pp. 2779-2781.
- H. Duarte and F. Cullinan, “Performance of HOM dampers in the 100 MHz RF cavities in the MAX IV 3 GeV ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS064, unpublished.
- E. Esarey, R. F. Hubbard, W. P. Leemans, A. Ting, and P. Sprangle, “Femtosecond Electron Bunches from Colliding Laser Pulses in Plasmas”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3PC006, pp. XX-XX.
- N. C. Shipman et al., “In-situ Bulk Residual Resistivity Ratio Measurement on Double Quarter Wave Crab Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 415-419.
- F. Perez et al., “ALBA II accelerator upgrade project status”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG02, pp. 1220-1223.
- J. W. Hurd et al., “Commissioning Plans for SSC Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-53, pp. 462-464.
- S. Adam and J. C. Collins, “Automatic Centering and Matching of Cyclotron Beams”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-15, pp. 2362-2365.
- N. C. Shipman, G. Burt, R. Calaga, and J. A. Mitchell, “Method to Calculate the Longitudinal Impedance From a Partial Wakefield Simulation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3844-3846.
- S. Adam, W. Joho, and C. J. Kost, “Longitudinal Space-Charge-Effects in the SIN Injector II and the SIN Ring Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-40, pp. 529-531.
- Y. Renier et al., “Statistics on High Average Power Operation and Results from the Electron Beam Characterization at PITZ”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1806-1808.
- S. Cunningham, R. Clarken, and A. C. Starritt, “A Compact Weather Station for Monitoring Environmental Effects on Beam Properties and Equipment”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 30-32.
- N. Ratcliffe and T. R. Edgecock, “A Study of Potential Accelerator Production of Radioisotopes for Both Diagnostics and Therapy”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4765-4767.
- M. Martinello et al., “Toward Qualifications of HB and LB 650 MHz Cavities for the Prototype Cryomodules for the PIP-II Project”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 448.
- O. Ferrando and E. Karantzoulis, “Main Beam Dump Transfer Line for the FERMI@ELETTRA LINAC”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC10, pp. 255-257.
- E. S. Fischer et al., “Superconducting Magnets at FAIR”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2546-2549.
- J. L. Erickson and R. W. Garnett, “Status of the Los Alamos Multi-Probe Facility for Matter-Radiation Interactions in Extremes”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 464-468.
- S. Zorzut, M. Cargnelutti, and S. Hunziker, “Influence of Environment Changes on Libera Sync 3 Long-term Stability”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 126-128.
- A. Mandal, R. Kumar, G. Rodrigues, and S. K. Suman, “A Large Area Scanning Magnet For Homogeneous Irradiation of Targets”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA002, pp. 339-341.
- S. West, J. W. Gray, and A. Morris, “Upgrade of the ISIS Main Magnet Power Supply”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT144, pp. 1467-1469.
- D. Winklehner et al., “High Power Cyclotrons for Neutrino Experiments”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 788-790.
- H. Henke, “Diffraction Radiation of Charges Moving Past Conducting Screens”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 868-871.
- V. Kain et al., “Slow extracted spill ripple control in the CERN SPS using adaptive Bayesian optimisation”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS55, pp. 1790-1793.
- A. Waghmare and J. Valladares, “LANSCE 805 MHz klystron design and performance”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper MOPB079, unpublished.
- T. A. Antaya, H. G. Blosser, and R. J. Burleigh, “Current Status of the ECR Ion Source Project at NSCL”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B48, pp. 184-187.
- H. Qin, R. C. Davidson, J. J. Barnard, M. Chung, and T.-S. F. Wang, “Theoretical Study of Transverse-Longitudinal Emmittance Coupling”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOCN5, pp. 758-760.
- M. G. Minty, R. Akre, F. J. Decker, and J. Turner, “Operation and Performance of Bunch Precompression for Increased Current Transmission at the SLC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3B013, pp. 1569-1571.
- G. von Holtey, “Electron Beam Collimation at LEP Energies”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1252-1255.
- N. Chaisueb and S. Rimjaem, “Study on Undulator Radiation from Femtosecond Electron Bunches”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 702-706.
- A. M. Meseck, M. Abo-Bakr, and B. Kuske, “The Influence of the Seed Pulse Shape on the Output Performance of the BESSY Multi-stage HGHG-FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOPOS06, pp. XX-XX.
- J.-P. Auclair, P.-A. Chamouard, and J.-L. Lemaire, “Limitations and Improvements of Heavy Ion Acceleration with a 20-MeV Proton Linac”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S1-11, pp. 43-46.
- J. D. Mammosser et al., “Fabrication and Testing of Deflecting Cavities for APS”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper FRIOA03, pp. 1170-1175.
- P. Aguar Bartolome et al., “Testing of the First of Series Quadrupole Doublet Module for the SIS100 Synchrotron”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2409-2412.
- L. Rossa and M. Brendike, “EPICS Integration for Rapid Control Prototyping Hardware from Speedgoat”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP013, pp. 1317-1321.
- A. C. A. Aro et al., “Microdosimetric Measurements on the Clatterbridge Proton Therapy Beam”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 271-274.
- N. T. Callaway, R. W. Garnett, K. W. Jones, M. A. Oothoudt, and B. D. Ray, “Availability Results for the LANSCE Accelerator Complex”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W023, pp. 1165-1167.
- S. Avsec, B. Jeram, G. Mavric, M. Plesko, and J. Stefan, “The Design of the Control System for ANKA”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P053, pp. 2481-2483.
- R. B. Chavan, S. Chandan, K. Dixit, K. C. Mittal, A. R. Tillu, and V. Yadav, “Overview of Control System for 30MeV RF Source”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD45, pp. 222-224.
- N. Gonzalez, C. Colldelram, J. B. Gonz?â, J. Juanhuix, J. Nicolas, and C. Ruget, “Compact Mirror Bender With Sub-Nanometer Adaptive Correction Control”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 371-373.
- M. Dracos, “The European Spallation Source Neutrino Super Beam Design Study”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1702-1705.
- ?ü. Freitas, V. Hardion, M. Lindberg, R. Lindvall, R. Sv?ñrd, and C. Takahashi, “Control System Suite for Beam Position Monitors at MAX IV”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 496-499.
- P. S. Miller, H. G. Blosser, D. Gossman, B. Jeltema, D. Johnson, and P. Marchand, “Magnetic Field Measurements in the MSU MeV Superconducting Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-15, pp. 2111-2113.
- G. Ciovati et al., “Cavity Production and Testing of the First C75 Cryomodule for CEBAF”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 250.
- M. Bassetti et al., “Status Report on the Wiggler Magnet for Adone”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3863-3865.
- A. S. Sharma, S. Acharya, U. Kumar, G. R. Nagabhushana, and K. V. Nagesh, “Characterisation of Amorphous Magnetic Material with Multiple Pulse Excitation”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA070, pp. 732-734.
- J. M. Brennan et al., “RF Beam Control System for the Brookhaven Relativistic Heavy Ion Collider, RHIC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP02G, pp. 1705-1707.
- F. A. Heyn and T. K. Khoe, “Design and Performance of a 12-MeV Isochronous Cyclotron”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A08, pp. 29-39.
- M. Popovic, L. Allen, and C. W. Schmidt, “Fermilab Linac Injector, Revisited”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPA06, pp. 917-919.
- R. Valc?â, C. Colldelram, N. Gonzalez, E. Pereiro, A. J. Perez-Berna, and A. Sorrentino, “New Holder for Dual-Axis Cryo Soft X-Ray Tomography of Cells at the Mistral Beamline”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 427-429.
- N. Holmberg et al., “Time Synchronization and Timestamping for the ESS Neutron Instruments”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THMBCMO24, pp. 1250-1255.
- O. Ferrando and G. D'Auria, “Longitudinal Beam Dynamics Studies for the FERMI@ELETTRA Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC012, pp. 2999-3001.
- Z. Qian, M. Champion, H. W. Miller, A. Moretti, and R. Padilla, “Final Module Tuning of the 805 MHz Side-Coupled Cavities for the Fermilab Linac Upgrade”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-44, pp. 422-424.
- G. Rodrigues et al., “HTS-ECRIS and Low Energy Beam Transport System of the High Current Injector”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA078, pp. 434-436.
- M. Modica et al., “Preliminary thermal load calculations of superconducting deflecting cavities for ELETTRA 2.0”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper THP68, unpublished.
- C. J. Densham et al., “Design of the T2K Target for a 0.75-MW Proton Beam”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper THO2A01, pp. 560-562.
- L. Giannessi et al., “FEL Experiments at SPARC”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper TUPB18, pp. 294-297.
- D. J. Clark et al., “Design and Construction of the Axial Injection System for the 88 - Inch Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 471-474.
- J. A. Benjamin, “Selection of a Vac-Ion Pump for a Terminal Ion Source”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 107-109.
- Y. Iwata et al., “Alternating-Phase-Focused Linac with Interdigital H-Mode Structure for Medical Injectors”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP007, pp. 1084-1086.
- E.-C. Huang, P. Anisimov, and L. Rybarcyk, “Benchmarking HPSim with the LANSCE Linac”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM112, pp. 2480-2482.
- F. M. Nortier, J. W. Lenz, J. W. Lenz, P. A. Smith P, and A. Smith Concepts, “Large-Scale Isotope Production With An Intense 100 Mev Proton Beam: Recent Target Performance Experience”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 257-259.
- P. L. Lemut, S. Zorzut, B. Batagelj, J. Tratnik, and M. Leskovec, “Evaluation of Short and Long-Term Stability of the 2998 MHz Reference-Clock Transfer System”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG009, pp. 41-43.
- J. Ohnishi, “CONSTRUCTION STATUS OF THE RIKEN INTERMEDIATE-STAGE RING CYCLOTRON (IRC)”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P14, pp. XX-XX.
- J. E. Petersson, T. Bögershausen, N. Holmberg, M. Olsson, T. S. Richter, and F. Rojas, “Characterizing Motion Control Systems to Enable Accurate Continuous and Event-Based Scans”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP052, pp. 1431-1434.
- R. Fullwood, W. A. Bryant, and D. E. Kraus, “Electronic Instrumentation at the RPI Linac”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 530-535.
- M. Di Carlo et al., “Tm Services: An Architecture for Monitoring and Controlling the Square Kilometre Array (SKA) Telescope Manager (Tm)”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 943-947.
- Y. E. Tan et al., “Commissioning of the Fast Orbit Feedback System at the Australian Synchrotron”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1770-1773.
- J. C. Collins et al., “Computer Control Strategies at SIN”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-08, pp. 2337-2340.
- R. B. Chavan et al., “Fiber Optic Control for Electron Gun Power Supplies of 3MeV DC Accelerator”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP023, pp. XX-XX.
- F. Hornstra, A. Brescia, M. Knott, and C. Swoboda, “On-Line Computer Monitoring and Optimization of a Multiple Target Proton Beam Line”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 823-827.
- E. Sabia, G. Dattoli, A. Dipace, and C. R. Frascati, “Towards A Self Sustained Free Electron Laser Device”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP064, pp. 1232-1234.
Back to search