Favourites
For Word
[n] D. Giove, P. Gmaj, L. Lo Monaco, G. Raia, and L. Rossi, “Test and Calibration of the Magnetic Measurement System for the Superconducting Cyclotron at LNS, Catania”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 936-939.
[n] J. Billen, A. Shapiro, and G. Spalek, “Field Stability in Two-Stem Drift-Tube Linacs”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-35, pp. 125-127.
[n] C. Meng, X. P. Li, G. Pei, and J. R. Zhang, “The Progress of CEPC Positron Source Design”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 319-321. doi:10.18429/JACoW-IPAC2018-MOPMF084
[n] C. Mitsuda et al., “Test coil-unit fabrication of Nb3Sn superconducting multipole wiggler for next generation light source in KEK-PF”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB050, unpublished.
[n] T. J. Shea, D. W. Feldman, R. B. Fiorito, C. Maxey, T. J. McManamy, and A. G. Shkvarunets, “Status of Beam Imaging Developments for the SNS Target”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOOC04, pp. 38-40.
[n] M. Moretti, Y. N. Hoerstensmeyer, F. Marhauser, and A. Navitski, “Fabrication and Surface Treatment of Superconducting Rf Single Spoke Cavities for the Myrrha Project”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 578-583. doi:10.18429/JACoW-SRF2023-TUPTB067
[n] Y. I. Levinsen et al., “Plans for the European Spallation Source Beam Physics Control Software”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3086-3089. doi:10.18429/JACoW-IPAC2016-WEPOY043
[n] V. Miltchev, D. Riebesehl, J. Rossbach, M. Trunk, and O. Stein, “SALOME: An Accelerator for the Practical Course in Accelerator Physics”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2235-2237. doi:10.18429/JACoW-IPAC2014-WEPRO114
[n] J. A. Pellish, “Radiation Effects in Microelectronics - Why We Need Particle Accelerators”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper FRCDE3, unpublished.
[n] M. Z. Zhang, J. Hou, B. C. Jiang, H. H. Li, and S. Q. Tian, “Vertical Beam Size Correction at the SSRF Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC017, pp. 2043-2045.
[n] N. Bazin et al., “CEA Contribution to the PIP-II Linear Accelerator”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 234-237. doi:10.18429/JACoW-SRF2023-MOPMB055
[n] S. Zorzetti, M. Wendt, and L. Fanucci, “Study of the Electrical Center of a Resonant Cavity Beam Position Monitor (RF-BPM) and Its Integration With the Main Beam Quadrupole for Alignment Purposes”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1297-1299. doi:10.18429/JACoW-NAPAC2016-FRA2CO03
[n] S. Bilgen et al., “Evolution of the LHC Beam Screen Surface Conditioning Upon Electron Irradiation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4370-4372. doi:10.18429/JACoW-IPAC2021-THPAB290
[n] T. Konomi, F. Furuta, and K. Saito, “Design and Model Cavity Test of the Demountable Damped Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE014, pp. 3374-3376.
[n] O. Mohsen, R. Ainsworth, and A. V. Burov, “Investigation of Tail-dominated Instability in the Fermilab Recycler Ring”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 403-406. doi:10.18429/JACoW-HB2023-THAFP04
[n] A. Ferrero Colomo et al., “Performance Validation of the Existing and Upgraded PS Injection Kicker”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3994-3997. doi:10.18429/JACoW-IPAC2019-THPRB078
[n] S. Pei and B. Gao, “Studies on the S-band Bunching System with the Hybrid Accelerating Structure”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 79-82. doi:10.18429/JACoW-SAP2017-MOPH23
[n] M. Jablonka, B. Aune, and Ch. Magne, “A Scheme for a Fully Superconducting Electron Injector”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 478-481.
[n] P. A. Maslov, K. A. Meyer, and K. Zagar, “TestBed - Automated Hardware-in-the-Loop Test Framework”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper TCO303, pp. 150-151.
[n] H. Delsim-Hashemi et al., “Status of sFLASH, the Seeding Experiment at FLASH”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE009, pp. 2161-2163.
[n] K. Yoshiki Franzen et al., “A Center Region Upgrade of the LBNL 88-Inch Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT015, pp. 186-188.
[n] F. Iazzourene, V. Forchi, and C. Scafuri, “Application Programs for the Elettra Booster Commissioning and Operation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP005, pp. 1535-1537.
[n] J. Kay, K. A. R. Baker, W. J. Hoffman, and I. P. S. Martin, “Stability of the Floor Slab at Diamond Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO035, pp. 562-564.
[n] I. Rutkowski, L. Butkowski, M. Hoffmann, H. Schlarb, and Ch. Schmidt, “REGAE LLRF Control System Overview”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA031, pp. 3210-3212.
[n] K. Holzfeind et al., “Longitudinal phase space measurements at MedAustron”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1673-1676. doi:10.18429/JACoW-IPAC2024-TUPS17
[n] H. Z. Zhang, S. Dong, Z. P. Li, and C.-F. Wu, “Design of Photonic Bandgap Fiber Accelerating Structure”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP023, pp. 4582-4584.
[n] Y. Morino, K. Agari, Y. Sato, and A. Toyoda, “Upgrade of the Beam Monitor System for Hadron Experimental Facility at J-PARC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 86-89. doi:10.18429/JACoW-ICALEPCS2015-MOM309
[n] D. Trbojevic et al., “Lattice Design for the ERL Electron Ion Collider in RHIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA028, pp. 127-129.
[n] G. L. Orlandi and C. R. Frascati, “Beam Transverse Size Effects on the Transition Radiation Energy Spectrum”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC074, pp. 1221-1223.
[n] T. Higo, K. Kubo, and S. Sakanaka, “Compensation of Bunch Position Shift Using Sub-RF Cavity in a Damping Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3503-3506.
[n] O. C. Dermois, A. G. Drentje, and H. W. Schreuder, “Recent Developments at the KVI Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABP-03, pp. 107-109.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Giove, P. Gmaj, L. Lo Monaco, G. Raia, and L. Rossi, “Test and Calibration of the Magnetic Measurement System for the Superconducting Cyclotron at LNS, Catania”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 936-939.
- J. Billen, A. Shapiro, and G. Spalek, “Field Stability in Two-Stem Drift-Tube Linacs”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-35, pp. 125-127.
- C. Meng, X. P. Li, G. Pei, and J. R. Zhang, “The Progress of CEPC Positron Source Design”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 319-321.
- C. Mitsuda et al., “Test coil-unit fabrication of Nb3Sn superconducting multipole wiggler for next generation light source in KEK-PF”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB050, this conference.
- T. J. Shea, D. W. Feldman, R. B. Fiorito, C. Maxey, T. J. McManamy, and A. G. Shkvarunets, “Status of Beam Imaging Developments for the SNS Target”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOOC04, pp. 38-40.
- M. Moretti, Y. N. Hoerstensmeyer, F. Marhauser, and A. Navitski, “Fabrication and Surface Treatment of Superconducting Rf Single Spoke Cavities for the Myrrha Project”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB067, pp. 578-583.
- Y. I. Levinsen et al., “Plans for the European Spallation Source Beam Physics Control Software”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3086-3089.
- V. Miltchev, D. Riebesehl, J. Rossbach, M. Trunk, and O. Stein, “SALOME: An Accelerator for the Practical Course in Accelerator Physics”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2235-2237.
- J. A. Pellish, “Radiation Effects in Microelectronics - Why We Need Particle Accelerators”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper FRCDE3, unpublished.
- M. Z. Zhang, J. Hou, B. C. Jiang, H. H. Li, and S. Q. Tian, “Vertical Beam Size Correction at the SSRF Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC017, pp. 2043-2045.
- N. Bazin et al., “CEA Contribution to the PIP-II Linear Accelerator”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB055, pp. 234-237.
- S. Zorzetti, M. Wendt, and L. Fanucci, “Study of the Electrical Center of a Resonant Cavity Beam Position Monitor (RF-BPM) and Its Integration With the Main Beam Quadrupole for Alignment Purposes”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1297-1299.
- S. Bilgen et al., “Evolution of the LHC Beam Screen Surface Conditioning Upon Electron Irradiation”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4370-4372.
- T. Konomi, F. Furuta, and K. Saito, “Design and Model Cavity Test of the Demountable Damped Cavity”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE014, pp. 3374-3376.
- O. Mohsen, R. Ainsworth, and A. V. Burov, “Investigation of Tail-dominated Instability in the Fermilab Recycler Ring”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THAFP04, pp. 403-406.
- A. Ferrero Colomo et al., “Performance Validation of the Existing and Upgraded PS Injection Kicker”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3994-3997.
- S. Pei and B. Gao, “Studies on the S-band Bunching System with the Hybrid Accelerating Structure”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 79-82.
- M. Jablonka, B. Aune, and Ch. Magne, “A Scheme for a Fully Superconducting Electron Injector”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 478-481.
- P. A. Maslov, K. A. Meyer, and K. Zagar, “TestBed - Automated Hardware-in-the-Loop Test Framework”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper TCO303, pp. 150-151.
- H. Delsim-Hashemi et al., “Status of sFLASH, the Seeding Experiment at FLASH”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE009, pp. 2161-2163.
- K. Yoshiki Franzen et al., “A Center Region Upgrade of the LBNL 88-Inch Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT015, pp. 186-188.
- F. Iazzourene, V. Forchi, and C. Scafuri, “Application Programs for the Elettra Booster Commissioning and Operation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP005, pp. 1535-1537.
- J. Kay, K. A. R. Baker, W. J. Hoffman, and I. P. S. Martin, “Stability of the Floor Slab at Diamond Light Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO035, pp. 562-564.
- I. Rutkowski, L. Butkowski, M. Hoffmann, H. Schlarb, and Ch. Schmidt, “REGAE LLRF Control System Overview”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA031, pp. 3210-3212.
- K. Holzfeind et al., “Longitudinal phase space measurements at MedAustron”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS17, pp. 1673-1676.
- H. Z. Zhang, S. Dong, Z. P. Li, and C.-F. Wu, “Design of Photonic Bandgap Fiber Accelerating Structure”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP023, pp. 4582-4584.
- Y. Morino, K. Agari, Y. Sato, and A. Toyoda, “Upgrade of the Beam Monitor System for Hadron Experimental Facility at J-PARC”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 86-89.
- D. Trbojevic et al., “Lattice Design for the ERL Electron Ion Collider in RHIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA028, pp. 127-129.
- G. L. Orlandi and C. R. Frascati, “Beam Transverse Size Effects on the Transition Radiation Energy Spectrum”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC074, pp. 1221-1223.
- T. Higo, K. Kubo, and S. Sakanaka, “Compensation of Bunch Position Shift Using Sub-RF Cavity in a Damping Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3503-3506.
- O. C. Dermois, A. G. Drentje, and H. W. Schreuder, “Recent Developments at the KVI Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABP-03, pp. 107-109.
Back to search