Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Kamiya, K. Shinoe, N. Nakamura, T. Koseki, T. Ieiri, and T. Katsura, “Beam Position Monitoring System Using PIN Diode Switches”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2295-2298.
[n] P. Emma, L. D. Bentson, R. A. Erickson, H. Fieguth, J. Seeman, and A. Seryi, “Proposal for a Multi-Use Test Beam Area in the SLAC B-Line”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP032, pp. 2221-2223.
[n] Y. S. Wong, J. C. Huang, and K.-B. Liu, “Analysis and Compensator Design of Magnet Correction Power Supply”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO014, pp. 3364-3366.
[n] X. Liu, O. Kamigaito, N. Sakamoto, and K. Yamada, “Preliminary Design of a High-intensity Continuous-wave Deuteron RFQ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2287-2289. doi:10.18429/JACoW-IPAC2017-TUPVA089
[n] Y. Suetsugu, H. Fukuma, K. Ohmi, K. Shibata, and M. Tobiyama, “Study to Mitigate Electron Cloud Effect in SuperKEKB”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 95. doi:10.18429/JACoW-eeFACT2018-TUYAA04
[n] E. Plouviez et al., “Broadband Bunch by Bunch Feedback for the ESRF using a Single High Resolution and Fast Sampling FPGA DSP”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH082, pp. 2976-2978.
[n] E. D. Cantero, W. Andreazza, E. Bravin, and A. G. Sosa, “The Status of Beam Diagnostics for the Hie-Isolde Linac at Cern”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF13, pp. 565-568.
[n] A. Caracappa, C. Danneil, A. J. Della Penna, R. P. Fliller, D. Padrazo, and O. Singh, “A PPS Compliant Stored Beam Current Monitor at NSLS-II”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 426-429. doi:10.18429/JACoW-IBIC2016-TUPG38
[n] G. Papotti et al., “Operation of the LHC with Protons at High Luminosity and High Energy”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2066-2069. doi:10.18429/JACoW-IPAC2016-WEOCA01
[n] Yu. D. Tur, V. I. Beloglazov, E. A. Khomyakov, V. P. Krivchikov, V. B. Mufel, and V. V. Zakutin, “Klystron Modulator for Industrial Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAE14, pp. 1225-1226.
[n] T. V. Gorlov and A. M. Tron, “Photocathode Roughness Impact on Photogun Beam Characteristics”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH036, pp. 121-123.
[n] Y. Kamiya, H. Nakamura, Y. Fujita, and T. Katsura, “Horizontal Movement of the Storage Ring Floor at the Photon Factory”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2260-2263.
[n] Y. Kamiya and M. Katoh, “Sextupole Correction for a Ring with Large Chromaticity and the Influence of Magnetic Errors on its Parameters”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1310-1313.
[n] J. Pradhan et al., “Study of Magnetic Field Imperfections of Kolkata Superconducting Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP078, pp. 209-211.
[n] I. Hwang, E.-S. Kim, J. Hong, Y. Morozumi, and K. Saito, “Multipacting Study of ICHIRO End Cavity”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP15, pp. XX-XX.
[n] J. Angot et al., “Development of a New Compact 5.8 GHz ECR Ion Source”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 101-104. doi:10.18429/JACoW-ECRIS2016-WEPP09
[n] D. Raparia, “HESQ, a Low Energy Beam Transport for the SSC Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU437, pp. 405-407.
[n] T. Shirai et al., “Electron Cooling Experiments at S-LSR”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THM1I02, pp. 139-143.
[n] P. Thieberger et al., “The Electron Backscattering Detector (eBSD), a New Tool for the Precise Mutual Alignment of the Electron and Ion Beams in Electron Lenses”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD02, pp. 129-133.
[n] E. Plouviez and N. Michel, “Cleaning of Parastic Bunches in the ESRF Booster Synchrotron for Time Structure Modes of Operation”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF032, pp. 2341-2343.
[n] V. Namora et al., “Eradication of Mercury Ignitron from the 400 kA Magnetic Horn Pulse Generator for CERN Antiproton Decelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2586-2588. doi:10.18429/JACoW-IPAC2018-WEPMF086
[n] D. Reggiani, C. K. Allen, and M. Seidel, “Transverse Phase-Space Beam Tomography at PSI and SNS Proton Accelerators”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD58, pp. 218-222.
[n] J. W. Storey et al., “First Results From the Operation of a Rest Gas Ionisation Profile Monitor Based on a Hybrid Pixel Detector”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 318-322. doi:10.18429/JACoW-IBIC2017-WE2AB5
[n] K. Buerkmann, G. Schindhelm, and T. Schneegans, “Performance of the White Circuits of the BESSY II Booster Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP11C, pp. 2062-2064.
[n] S. Park et al., “Electron Bunch Length Measurement using an RF Deflecting Cavity”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 188-190. doi:10.18429/JACoW-FEL2015-MOP066
[n] S. Kamada, Y. Kamiya, and M. Kihara, “Lattice of Photon Factory Storage Ring”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3848-3851.
[n] A. J. Della Penna, “NSLS-II Storage Ring and Booster Pilot Tone Combiner Lab Testing Results”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG023, pp. 80-82.
[n] D. Giove et al., “A high brightness beam test facility for ERL applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2127-2130. doi:10.18429/JACoW-IPAC2023-TUPL164
[n] M. A. Fraser et al., “Matching Studies Between the CERN PSB and PS Using Turn-by-Turn Beam Profile Acquisitions with a Residual Beam Gas Ionisation Monitor”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2161-2164. doi:10.18429/JACoW-IPAC2022-WEPOTK043
[n] K. Watanabe, H. Hayano, S. Noguchi, E. Kako, and T. Shishido, “New HOM coupler design for ERL injector at KEK”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP30, pp. XX-XX.
[n] T. Wang, J. Mammosser, L. Phillips, and R. Rimmer, “Investigations to Reduce Field Emission in Production SRF Cavities at Jlab”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP14, pp. 633-636.
[n] P. Pierini et al., “European XFEL 3.9 GHz System”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP011, pp. 100-102.
[n] T. Shintake, H. Kitamura, and H. Matsumoto, “Bunch Compressor for SPring-8 Compact SASE Source”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO429, pp. 100-102.
[n] M. Rescic, R. Seviour, and W. Blokland, “Accelerators and Their Ghosts”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1975-1978. doi:10.18429/JACoW-IPAC2017-TUPIK109
[n] N. Solyak et al., “3.9 GHz Power Coupler Design and Tests for LCLS-II Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2727-2729. doi:10.18429/JACoW-IPAC2018-WEPML022
[n] A. N. Dovbnya, N. G. Reshetn, V. P. Romas, V. V. Zakutin, and V. F. Zhiglo, “Experimental Investigation of a Cold-Cathode Magnetron Gun”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP064L, pp. 1508-1509.
[n] D. Einfeld and M. Plesko, “The QBA Optics for the 3.2 GeV Synchrotron Light Source ROSY II”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 149-152.
[n] H. S. Sandberg et al., “Measuring the Beam Profile by Counting Ionization Electrons”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 257-260. doi:10.18429/JACoW-IBIC2019-TUBO04
[n] A. Latina et al., “CompactLight Design Study”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 85-88. doi:10.18429/JACoW-FLS2018-WEP1WC02
[n] R. J. Michnoff et al., “A Wire Scanner System for Characterizing the BNL Energy Recovery Linac Beam Position Monitor System”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG026, pp. 89-91.
[n] N. Nakamura et al., “Study of High-Field Multipole Wiggler”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D010, pp. 689-691.
[n] M. Pellin et al., “Initial Tests of Atomic Layer Deposition (ald) in Superconducting RF Systems”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP64, pp. XX-XX.
[n] W. Xu et al., “Prototype and high-power test of SiC HOM”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2723-2726. doi:10.18429/JACoW-IPAC2024-WEPS13
[n] S. Golubev et al., “Point-like Neutron Emission Observation Using a Neutron Generator Based on a Gasdynamic ECR Ion Source”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 185-187. doi:10.18429/JACoW-ECRIS2018-THA2
[n] B. Gamage et al., “Status of the second interaction region design for Electron-Ion Collider”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPA022, unpublished.
[n] B. Yu. Bogdanovich et al., “THE OUTPUT BEAM-LINE AND A NOVEL ION SOURCE OF 2-MEV PROTON RFQ LINAC”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper THAPH03, pp. XX-XX.
[n] Yu. D. Tur, A. N. Dovbnya, V. V. Mitrochenko, N. G. Reshetnyak, V. P. Romas, and V. V. Zakutin, “Obtaining the Linear Electron Beams by Using the Magnetron Injection Guns with Cold Secondary Emission Metallic Cathodes (Experiment)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3W035, pp. 2820-2822.
[n] M. Scholz, “FEL Performance Achieved at European XFEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 29-33. doi:10.18429/JACoW-IPAC2018-MOZGBD2
[n] A. Drees and Z. Xu, “Results from Luminosity Scans during the RHIC 2000 Run”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH116, pp. 3120-3122.
[n] A. Neumann, W. Anders, J. Knobloch, and O. Kugeler, “Microphonics in CW tesla cavities and their compensation with fast tuners”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WE201, pp. XX-XX.
[n] A. J. Della Penna, “ADC Considerations and Analysis for Band Pass Sampling Systems”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM097, pp. 434-436.
[n] C. Gabor, A. P. Letchford, D. Reggiani, and M. Seidel, “Comparative Studies of Reconstruction Methods to Achieve Multi-Dimensional Phase Space Information”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD91, pp. 521-523.
[n] R. Oweiss et al., “Development of Quality Control Procedures for the Processing of ReA3 Copper Plated Fundamental Power Coupler”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP053, pp. 1031-1035.
[n] D. Einfeld, M. Plesko, and D. Husmann, “Dynamic Aperture of the 2.5 GeV Synchrotron Radiation Source LISA”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 152-155.
[n] Y. E. Tan, D. R. T. Appadoo, M. J. Boland, and R. T. Dowd, “Low Alpha Configuration for Generating Short Bunches”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP009, pp. 3711-3713.
[n] J. Kim, G. Jang, J. Lee, and J. Seok, “The Korea-4GSR storage ring lattice design”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 789-792. doi:10.18429/JACoW-IPAC2025-MOPS089
[n] M. Fraser and C. Ahdida, “The High Intensity ECN3 project and the SPS Beam Dump Facility at CERN”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4061, unpublished.
[n] F. Zimmermann and A. Faus-Golfe, “A Nonlinear Collimation System for CLIC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI038, pp. 533-535.
[n] A. Laisn?®, “IPN Orsay Project - First Machine Design Studies”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper CC-03, pp. 203-208.
[n] A. Laisn?® and D. Potaux, “Possible Pole Geometry Determination Method for an Isochronous Superconducting Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B19, pp. 89-93.
[n] M. Coman, D. Dancila, I. Profatilova, and M. Jacewicz, “Exploring high gradient limit with cryogenic experiments at FREIA laboratory”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1618-1621. doi:10.18429/JACoW-IPAC2024-TUPR86
[n] M. Martinello et al., “Advancement in the Understanding of the Field and Frequency Dependent Microwave Surface Resistance of Niobium”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 364-367. doi:10.18429/JACoW-SRF2017-TUYAA02
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Kamiya, K. Shinoe, N. Nakamura, T. Koseki, T. Ieiri, and T. Katsura, “Beam Position Monitoring System Using PIN Diode Switches”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2295-2298.
- P. Emma, L. D. Bentson, R. A. Erickson, H. Fieguth, J. Seeman, and A. Seryi, “Proposal for a Multi-Use Test Beam Area in the SLAC B-Line”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP032, pp. 2221-2223.
- Y. S. Wong, J. C. Huang, and K.-B. Liu, “Analysis and Compensator Design of Magnet Correction Power Supply”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO014, pp. 3364-3366.
- X. Liu, O. Kamigaito, N. Sakamoto, and K. Yamada, “Preliminary Design of a High-intensity Continuous-wave Deuteron RFQ”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2287-2289.
- Y. Suetsugu, H. Fukuma, K. Ohmi, K. Shibata, and M. Tobiyama, “Study to Mitigate Electron Cloud Effect in SuperKEKB”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 95.
- E. Plouviez et al., “Broadband Bunch by Bunch Feedback for the ESRF using a Single High Resolution and Fast Sampling FPGA DSP”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH082, pp. 2976-2978.
- E. D. Cantero, W. Andreazza, E. Bravin, and A. G. Sosa, “The Status of Beam Diagnostics for the Hie-Isolde Linac at Cern”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF13, pp. 565-568.
- A. Caracappa, C. Danneil, A. J. Della Penna, R. P. Fliller, D. Padrazo, and O. Singh, “A PPS Compliant Stored Beam Current Monitor at NSLS-II”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 426-429.
- G. Papotti et al., “Operation of the LHC with Protons at High Luminosity and High Energy”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2066-2069.
- Yu. D. Tur, V. I. Beloglazov, E. A. Khomyakov, V. P. Krivchikov, V. B. Mufel, and V. V. Zakutin, “Klystron Modulator for Industrial Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAE14, pp. 1225-1226.
- T. V. Gorlov and A. M. Tron, “Photocathode Roughness Impact on Photogun Beam Characteristics”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH036, pp. 121-123.
- Y. Kamiya, H. Nakamura, Y. Fujita, and T. Katsura, “Horizontal Movement of the Storage Ring Floor at the Photon Factory”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2260-2263.
- Y. Kamiya and M. Katoh, “Sextupole Correction for a Ring with Large Chromaticity and the Influence of Magnetic Errors on its Parameters”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1310-1313.
- J. Pradhan et al., “Study of Magnetic Field Imperfections of Kolkata Superconducting Cyclotron”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP078, pp. 209-211.
- I. Hwang, E.-S. Kim, J. Hong, Y. Morozumi, and K. Saito, “Multipacting Study of ICHIRO End Cavity”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP15, pp. XX-XX.
- J. Angot et al., “Development of a New Compact 5.8 GHz ECR Ion Source”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 101-104.
- D. Raparia, “HESQ, a Low Energy Beam Transport for the SSC Linac”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU437, pp. 405-407.
- T. Shirai et al., “Electron Cooling Experiments at S-LSR”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper THM1I02, pp. 139-143.
- P. Thieberger et al., “The Electron Backscattering Detector (eBSD), a New Tool for the Precise Mutual Alignment of the Electron and Ion Beams in Electron Lenses”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPD02, pp. 129-133.
- E. Plouviez and N. Michel, “Cleaning of Parastic Bunches in the ESRF Booster Synchrotron for Time Structure Modes of Operation”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF032, pp. 2341-2343.
- V. Namora et al., “Eradication of Mercury Ignitron from the 400 kA Magnetic Horn Pulse Generator for CERN Antiproton Decelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2586-2588.
- D. Reggiani, C. K. Allen, and M. Seidel, “Transverse Phase-Space Beam Tomography at PSI and SNS Proton Accelerators”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD58, pp. 218-222.
- J. W. Storey et al., “First Results From the Operation of a Rest Gas Ionisation Profile Monitor Based on a Hybrid Pixel Detector”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 318-322.
- K. Buerkmann, G. Schindhelm, and T. Schneegans, “Performance of the White Circuits of the BESSY II Booster Synchrotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP11C, pp. 2062-2064.
- S. Park et al., “Electron Bunch Length Measurement using an RF Deflecting Cavity”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 188-190.
- S. Kamada, Y. Kamiya, and M. Kihara, “Lattice of Photon Factory Storage Ring”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3848-3851.
- A. J. Della Penna, “NSLS-II Storage Ring and Booster Pilot Tone Combiner Lab Testing Results”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG023, pp. 80-82.
- D. Giove et al., “A high brightness beam test facility for ERL applications”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL164, pp. 2127-2130.
- M. A. Fraser et al., “Matching Studies Between the CERN PSB and PS Using Turn-by-Turn Beam Profile Acquisitions with a Residual Beam Gas Ionisation Monitor”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2161-2164.
- K. Watanabe, H. Hayano, S. Noguchi, E. Kako, and T. Shishido, “New HOM coupler design for ERL injector at KEK”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP30, pp. XX-XX.
- T. Wang, J. Mammosser, L. Phillips, and R. Rimmer, “Investigations to Reduce Field Emission in Production SRF Cavities at Jlab”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP14, pp. 633-636.
- P. Pierini et al., “European XFEL 3.9 GHz System”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP011, pp. 100-102.
- T. Shintake, H. Kitamura, and H. Matsumoto, “Bunch Compressor for SPring-8 Compact SASE Source”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO429, pp. 100-102.
- M. Rescic, R. Seviour, and W. Blokland, “Accelerators and Their Ghosts”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1975-1978.
- N. Solyak et al., “3.9 GHz Power Coupler Design and Tests for LCLS-II Project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2727-2729.
- A. N. Dovbnya, N. G. Reshetn, V. P. Romas, V. V. Zakutin, and V. F. Zhiglo, “Experimental Investigation of a Cold-Cathode Magnetron Gun”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP064L, pp. 1508-1509.
- D. Einfeld and M. Plesko, “The QBA Optics for the 3.2 GeV Synchrotron Light Source ROSY II”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 149-152.
- H. S. Sandberg et al., “Measuring the Beam Profile by Counting Ionization Electrons”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 257-260.
- A. Latina et al., “CompactLight Design Study”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 85-88.
- R. J. Michnoff et al., “A Wire Scanner System for Characterizing the BNL Energy Recovery Linac Beam Position Monitor System”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG026, pp. 89-91.
- N. Nakamura et al., “Study of High-Field Multipole Wiggler”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D010, pp. 689-691.
- M. Pellin et al., “Initial Tests of Atomic Layer Deposition (ald) in Superconducting RF Systems”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP64, pp. XX-XX.
- W. Xu et al., “Prototype and high-power test of SiC HOM”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS13, pp. 2723-2726.
- S. Golubev et al., “Point-like Neutron Emission Observation Using a Neutron Generator Based on a Gasdynamic ECR Ion Source”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 185-187.
- B. Gamage et al., “Status of the second interaction region design for Electron-Ion Collider”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA022, unpublished.
- B. Yu. Bogdanovich et al., “THE OUTPUT BEAM-LINE AND A NOVEL ION SOURCE OF 2-MEV PROTON RFQ LINAC”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper THAPH03, pp. XX-XX.
- Yu. D. Tur, A. N. Dovbnya, V. V. Mitrochenko, N. G. Reshetnyak, V. P. Romas, and V. V. Zakutin, “Obtaining the Linear Electron Beams by Using the Magnetron Injection Guns with Cold Secondary Emission Metallic Cathodes (Experiment)”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3W035, pp. 2820-2822.
- M. Scholz, “FEL Performance Achieved at European XFEL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 29-33.
- A. Drees and Z. Xu, “Results from Luminosity Scans during the RHIC 2000 Run”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH116, pp. 3120-3122.
- A. Neumann, W. Anders, J. Knobloch, and O. Kugeler, “Microphonics in CW tesla cavities and their compensation with fast tuners”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WE201, pp. XX-XX.
- A. J. Della Penna, “ADC Considerations and Analysis for Band Pass Sampling Systems”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM097, pp. 434-436.
- C. Gabor, A. P. Letchford, D. Reggiani, and M. Seidel, “Comparative Studies of Reconstruction Methods to Achieve Multi-Dimensional Phase Space Information”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD91, pp. 521-523.
- R. Oweiss et al., “Development of Quality Control Procedures for the Processing of ReA3 Copper Plated Fundamental Power Coupler”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP053, pp. 1031-1035.
- D. Einfeld, M. Plesko, and D. Husmann, “Dynamic Aperture of the 2.5 GeV Synchrotron Radiation Source LISA”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 152-155.
- Y. E. Tan, D. R. T. Appadoo, M. J. Boland, and R. T. Dowd, “Low Alpha Configuration for Generating Short Bunches”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP009, pp. 3711-3713.
- J. Kim, G. Jang, J. Lee, and J. Seok, “The Korea-4GSR storage ring lattice design”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS089, pp. 789-792.
- M. Fraser and C. Ahdida, “The High Intensity ECN3 project and the SPS Beam Dump Facility at CERN”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP4061, this conference.
- F. Zimmermann and A. Faus-Golfe, “A Nonlinear Collimation System for CLIC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI038, pp. 533-535.
- A. Laisn?®, “IPN Orsay Project - First Machine Design Studies”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper CC-03, pp. 203-208.
- A. Laisn?® and D. Potaux, “Possible Pole Geometry Determination Method for an Isochronous Superconducting Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B19, pp. 89-93.
- M. Coman, D. Dancila, I. Profatilova, and M. Jacewicz, “Exploring high gradient limit with cryogenic experiments at FREIA laboratory”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR86, pp. 1618-1621.
- M. Martinello et al., “Advancement in the Understanding of the Field and Frequency Dependent Microwave Surface Resistance of Niobium”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 364-367.
Back to search