Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Okamura et al., “SiC-JFET Switching Power Supply toward for Induction Ring Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 523-525. doi:10.18429/JACoW-IPAC2014-MOPME068
[n] P. K. Saha et al., “Recent Results of Beam Loss Mitigation and Extremely Low Beam Loss Operation of J-PARC RCS”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1616-1619. doi:10.18429/JACoW-IPAC2022-WEOYGD1
[n] X. M. Wen and X. H. Wang, “Commissioning Study of the Parasitic Mode with 3W1 Wiggler Magnet on the BEPC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15010, pp. XX-XX.
[n] M. Blaskiewicz, A. Chao, and Y. H. Chin, “Understanding the Effect of Space Charge on Instabilities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 743-745. doi:10.18429/JACoW-IPAC2015-MOPMN019
[n] M. Bonesini and Y. Karadzhov, “The Particle Identification System for the MICE Beamline Characterization”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC142, pp. 1356-1358.
[n] E. Bozoki, J. Bittner, L. Blumberg, T. Dickinson, and J. Galayda, “Closed Orbit Correction of the NSLS VUV Ring”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3106-3109.
[n] K. M. Ha and J. H. Kim, “Digital Power Supply Development at the PLS”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA033, pp. 674-676.
[n] M. A. Epps, P. L. Gueye, and R. Kazimi, “The General ElectroN Induced Emission (GENIE) System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT072, pp. 3877-3879.
[n] K. Ohmi, Y. Sato, J. Takano, and S. Hatakeyama, “Measurement of Optics Errors and Space Charge Effects”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO1B03, pp. 517-521.
[n] C. J. Sharpe, “Software Architecture for Beamline Automation - VMXi Use-Case”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1054-1059. doi:10.18429/JACoW-ICALEPCS2017-WEBPL04
[n] J. R. Lackey, D. J. Harding, J. A. John, V. S. Kashikhin, A. Makarov, and E. Prebys, “New Pulsed Orbit Bump Magnets for the Fermilab Booster Synchrotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT013, pp. 1341-1343.
[n] K. G. Nakamura et al., “Performance Evaluation of the Intra-Bunch Feedback System at J-PARC Main Ring”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper THCXB2, pp. 727-730.
[n] P. Martin et al., “Antiproton Acceleration in the Fermilab Main Ring and Tevatron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 47-50.
[n] A. Y. Molodozhentsev, S. Igarashi, Y. Sato, and J. Takano, “Beam Dynamics Study for J-PARC Main Ring by Using the 'Pencil' and Space-charge Dominated Beam: Measurements and Simulations”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB51, pp. 157-161.
[n] G. M. Wang et al., “Study of Beam Emittance and Energy Spread Measurements Using SVD and Multiple Flags in the NSLS-II Booster Extraction Beamline”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA084, pp. 2677-2679.
[n] M. J. Shirakata, S. Igarashi, K. Ishii, Y. Sato, and J. Takano, “New Arrangement of Collimators of J-PARC Main Ring”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 543-547. doi:10.18429/JACoW-HB2016-THAM4Y01
[n] K. G. Nakamura et al., “Development of Wideband BPM for Precise Measurement of Internal Bunch Motion”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 937-939. doi:10.18429/JACoW-IPAC2015-MOPTY001
[n] A. H. Adeyemi et al., “PEPPo: Using a Polarized Electron Beam to Produce Polarized Positrons”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1878-1880. doi:10.18429/JACoW-IPAC2015-TUPMA020
[n] R. Avery and D. J. Breuner, “Controlling Accelerator Engineering Costs”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 540-544.
[n] W. H. Hwang et al., “S-Band RF System for 0.1nm SASE FEL at PAL”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC28, pp. 304-306.
[n] M. Modena, H. Hsieh, and C. Sanelli, “High Current Density Septa for DAPhiNE Accumulator and Storage Rings”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1472-1475.
[n] C. Sanelli and H. Hsieh, “Design of the 1.8 Tesla Wiggler for the DAPhiNE Main Rings”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1391-1394.
[n] S. M. Lidia, “Emittance Compensation Studies of Photoinjector Beams with Angular Momentum”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB022, pp. 2089-2091.
[n] J. M. Kim, K. M. Ha, H.-S. Kang, J. H. Kim, and E.-H. Lee, “Improvement of Web-Based Monitoring of EPICS-IOC for PAL Control System”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA075, pp. 428-430.
[n] R. P. Fliller, R. Heese, S. Kowalski, J. Rose, T. V. Shaftan, and G. M. Wang, “Beam Stacking in the NSLS-II Booster”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC041, pp. 1817-1819.
[n] Q. Qin et al., “Design and Optimization of the BEPCII Synchrotron Radiation Mode”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP019, pp. 1132-1134.
[n] Y. Shobuda et al., “Coupled Bunch Instability and Its Cure at J-PARC RCS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2946-2949. doi:10.18429/JACoW-IPAC2017-WEPIK014
[n] R. P. Fliller et al., “NSLS-II Transport Line Performance”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC042, pp. 1820-1822.
[n] W. E. Norum and B. X. Yang, “A Novel FPGA-Based Bunch Purity Monitor System at the APS Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN115, pp. 4384-4386.
[n] H. Toyokawa, R. Kuroda, and H. Ohgaki, “W-band Electromagnetic Wave Undulator for AIST 800 MeV Electron Storage Ring TERAS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN047, pp. 1025-1027.
[n] N. Iida et al., “Pulse-to-Pulse Switching Injection to Three Rings of Different Energies from a Single Electron Linac at KEK”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP110, pp. 2769-2771.
[n] B. Yee-Rendon, Y. H. Chin, H. Kuboki, T. Toyama, and M. Schenk, “Updated Model of the Resistive Wall Impedance for the Main Ring of J-PARC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3204-3206. doi:10.18429/JACoW-IPAC2018-THPAK002
[n] A. Uchiyama, N. Fukunishi, and M. Komiyama, “Implementation of Web-based Operational Log System at RIBF”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1073-1077. doi:10.18429/JACoW-ICALEPCS2017-THAPL01
[n] S. M. Lidia, D. H. Whittum, and J. T. Donohue, “W-Band Free Electron Laser for High Gradient Structure Research”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V035, pp. 900-902.
[n] M. Kando et al., “Improvement of the Low Energy Beam Transport System at the ICR 7 MeV Proton Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-30, pp. 122-124.
[n] Q. Qin et al., “Beam dynamics studies in the BEPCII storage rings”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper MOACH03, pp. XX-XX.
[n] V. A. Alexandrof et al., “Results of Final Focus Test Beam”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAG01, pp. 2742-2746.
[n] J. van Zeijts and A. Marusic, “Ramp Design and Implementation for the RHIC Deuteron-Gold and Polarized Proton Runs”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH113, pp. XX-XX.
[n] J. B. McCaslin, P. R. LaPlant, A. R. Smith, W. P. Swanson, and R. H. Thomas, “Neutron Production by Ne and Si Ions on a Thick Cu Target at 670 MeV x A with Application to Radiation Protection”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3104-3107.
[n] S. M. Lidia, G. Bazouin, and P. A. Seidl, “Time-Dependent Phase-Space Measurements of the Longitudinally Compressing Beam in NDCX-I”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOCS4, pp. 61-63.
[n] K. Akasaka, “Dark Current Simulation in High Gradient Accelerating Structure”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP066G, pp. 483-485.
[n] A. Sato, “G4beamline Simulation for the COMET Solenoid Channel”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE046, pp. 3449-3451.
[n] S. K. Nayak, S. Bellavia, H. Chelminski, C. S. Cutler, D. Kim, and D. Medvedev, “Engineering Design of Gallium-Nickel Target in Niobium Capsule, with a Major Focus on Determining the Thermal Properties of Gallium-Nickel Through Thermal Testing and FEA, for Irradiation at BLIP”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 170-173. doi:10.18429/JACoW-NAPAC2019-MOPLS09
[n] N. Hayashi et al., “Beam Based Alignment of Synchrotorn under Coupled Quadrupole Magnet Environment”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD08, pp. 57-61.
[n] T. Tomimasu et al., “Commissioning of SAGA Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE078, pp. 4021-4023.
[n] O. Azzolini et al., “Metal Additive Manufacturing for Accelerator Technologies (MAAT project at INFN)”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7182, unpublished.
[n] S. M. Lidia and S. S. Yu, “Stability of Modulated Beam Transport in Relativistic Klystron Two-Beam Accelerators”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP132, pp. 1800-1802.
[n] P. Saha et al., “High intensity beam operation of J-PARC RCS with minimum beam loss”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2331-2334. doi:10.18429/JACoW-IPAC2023-TUPM061
[n] N. Ishihara, K. Ishihara, T. Kubota, S. Nakabayashi, and K. Yasuda, “A Position Feedback Control System for the Test Facility of JLC”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 431-433. doi:10.18429/JACoW-ICALEPCS1991-S12FC06
[n] P. Jemian, “hklpy2 - 2nd generation Bluesky diffractometer controls”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper THBG005, unpublished.
[n] P. Saha et al., “Beam loss and beam emittance minimization at J-PARC RCS for simultaneous operation to the MLF and MR”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 939-942. doi:10.18429/JACoW-IPAC2024-TUAN1
[n] R. Reimers et al., “Magnets in the PEP Injection Lines”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4027-4030.
[n] G. Schatz, “Industrial and Environmental Applications of Cyclotrons”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper GI-04, pp. 661-665.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Okamura et al., “SiC-JFET Switching Power Supply toward for Induction Ring Accelerators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 523-525.
- P. K. Saha et al., “Recent Results of Beam Loss Mitigation and Extremely Low Beam Loss Operation of J-PARC RCS”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1616-1619.
- X. M. Wen and X. H. Wang, “Commissioning Study of the Parasitic Mode with 3W1 Wiggler Magnet on the BEPC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP15010, pp. XX-XX.
- M. Blaskiewicz, A. Chao, and Y. H. Chin, “Understanding the Effect of Space Charge on Instabilities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 743-745.
- M. Bonesini and Y. Karadzhov, “The Particle Identification System for the MICE Beamline Characterization”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC142, pp. 1356-1358.
- E. Bozoki, J. Bittner, L. Blumberg, T. Dickinson, and J. Galayda, “Closed Orbit Correction of the NSLS VUV Ring”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3106-3109.
- K. M. Ha and J. H. Kim, “Digital Power Supply Development at the PLS”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA033, pp. 674-676.
- M. A. Epps, P. L. Gueye, and R. Kazimi, “The General ElectroN Induced Emission (GENIE) System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT072, pp. 3877-3879.
- K. Ohmi, Y. Sato, J. Takano, and S. Hatakeyama, “Measurement of Optics Errors and Space Charge Effects”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO1B03, pp. 517-521.
- C. J. Sharpe, “Software Architecture for Beamline Automation - VMXi Use-Case”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1054-1059.
- J. R. Lackey, D. J. Harding, J. A. John, V. S. Kashikhin, A. Makarov, and E. Prebys, “New Pulsed Orbit Bump Magnets for the Fermilab Booster Synchrotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT013, pp. 1341-1343.
- K. G. Nakamura et al., “Performance Evaluation of the Intra-Bunch Feedback System at J-PARC Main Ring”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper THCXB2, pp. 727-730.
- P. Martin et al., “Antiproton Acceleration in the Fermilab Main Ring and Tevatron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 47-50.
- A. Y. Molodozhentsev, S. Igarashi, Y. Sato, and J. Takano, “Beam Dynamics Study for J-PARC Main Ring by Using the 'Pencil' and Space-charge Dominated Beam: Measurements and Simulations”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOPAB51, pp. 157-161.
- G. M. Wang et al., “Study of Beam Emittance and Energy Spread Measurements Using SVD and Multiple Flags in the NSLS-II Booster Extraction Beamline”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA084, pp. 2677-2679.
- M. J. Shirakata, S. Igarashi, K. Ishii, Y. Sato, and J. Takano, “New Arrangement of Collimators of J-PARC Main Ring”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 543-547.
- K. G. Nakamura et al., “Development of Wideband BPM for Precise Measurement of Internal Bunch Motion”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 937-939.
- A. H. Adeyemi et al., “PEPPo: Using a Polarized Electron Beam to Produce Polarized Positrons”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1878-1880.
- R. Avery and D. J. Breuner, “Controlling Accelerator Engineering Costs”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 540-544.
- W. H. Hwang et al., “S-Band RF System for 0.1nm SASE FEL at PAL”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC28, pp. 304-306.
- M. Modena, H. Hsieh, and C. Sanelli, “High Current Density Septa for DAPhiNE Accumulator and Storage Rings”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1472-1475.
- C. Sanelli and H. Hsieh, “Design of the 1.8 Tesla Wiggler for the DAPhiNE Main Rings”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1391-1394.
- S. M. Lidia, “Emittance Compensation Studies of Photoinjector Beams with Angular Momentum”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB022, pp. 2089-2091.
- J. M. Kim, K. M. Ha, H.-S. Kang, J. H. Kim, and E.-H. Lee, “Improvement of Web-Based Monitoring of EPICS-IOC for PAL Control System”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA075, pp. 428-430.
- R. P. Fliller, R. Heese, S. Kowalski, J. Rose, T. V. Shaftan, and G. M. Wang, “Beam Stacking in the NSLS-II Booster”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC041, pp. 1817-1819.
- Q. Qin et al., “Design and Optimization of the BEPCII Synchrotron Radiation Mode”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP019, pp. 1132-1134.
- Y. Shobuda et al., “Coupled Bunch Instability and Its Cure at J-PARC RCS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2946-2949.
- R. P. Fliller et al., “NSLS-II Transport Line Performance”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC042, pp. 1820-1822.
- W. E. Norum and B. X. Yang, “A Novel FPGA-Based Bunch Purity Monitor System at the APS Storage Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN115, pp. 4384-4386.
- H. Toyokawa, R. Kuroda, and H. Ohgaki, “W-band Electromagnetic Wave Undulator for AIST 800 MeV Electron Storage Ring TERAS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN047, pp. 1025-1027.
- N. Iida et al., “Pulse-to-Pulse Switching Injection to Three Rings of Different Energies from a Single Electron Linac at KEK”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP110, pp. 2769-2771.
- B. Yee-Rendon, Y. H. Chin, H. Kuboki, T. Toyama, and M. Schenk, “Updated Model of the Resistive Wall Impedance for the Main Ring of J-PARC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3204-3206.
- A. Uchiyama, N. Fukunishi, and M. Komiyama, “Implementation of Web-based Operational Log System at RIBF”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1073-1077.
- S. M. Lidia, D. H. Whittum, and J. T. Donohue, “W-Band Free Electron Laser for High Gradient Structure Research”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3V035, pp. 900-902.
- M. Kando et al., “Improvement of the Low Energy Beam Transport System at the ICR 7 MeV Proton Linac”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-30, pp. 122-124.
- Q. Qin et al., “Beam dynamics studies in the BEPCII storage rings”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper MOACH03, pp. XX-XX.
- V. A. Alexandrof et al., “Results of Final Focus Test Beam”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAG01, pp. 2742-2746.
- J. van Zeijts and A. Marusic, “Ramp Design and Implementation for the RHIC Deuteron-Gold and Polarized Proton Runs”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TH113, pp. XX-XX.
- J. B. McCaslin, P. R. LaPlant, A. R. Smith, W. P. Swanson, and R. H. Thomas, “Neutron Production by Ne and Si Ions on a Thick Cu Target at 670 MeV x A with Application to Radiation Protection”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3104-3107.
- S. M. Lidia, G. Bazouin, and P. A. Seidl, “Time-Dependent Phase-Space Measurements of the Longitudinally Compressing Beam in NDCX-I”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOOCS4, pp. 61-63.
- K. Akasaka, “Dark Current Simulation in High Gradient Accelerating Structure”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP066G, pp. 483-485.
- A. Sato, “G4beamline Simulation for the COMET Solenoid Channel”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE046, pp. 3449-3451.
- S. K. Nayak, S. Bellavia, H. Chelminski, C. S. Cutler, D. Kim, and D. Medvedev, “Engineering Design of Gallium-Nickel Target in Niobium Capsule, with a Major Focus on Determining the Thermal Properties of Gallium-Nickel Through Thermal Testing and FEA, for Irradiation at BLIP”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 170-173.
- N. Hayashi et al., “Beam Based Alignment of Synchrotorn under Coupled Quadrupole Magnet Environment”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD08, pp. 57-61.
- T. Tomimasu et al., “Commissioning of SAGA Light Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE078, pp. 4021-4023.
- O. Azzolini et al., “Metal Additive Manufacturing for Accelerator Technologies (MAAT project at INFN)”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7182, this conference.
- S. M. Lidia and S. S. Yu, “Stability of Modulated Beam Transport in Relativistic Klystron Two-Beam Accelerators”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP132, pp. 1800-1802.
- P. Saha et al., “High intensity beam operation of J-PARC RCS with minimum beam loss”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM061, pp. 2331-2334.
- N. Ishihara, K. Ishihara, T. Kubota, S. Nakabayashi, and K. Yasuda, “A Position Feedback Control System for the Test Facility of JLC”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S12FC06, pp. 431-433.
- P. Jemian, “hklpy2 - 2nd generation Bluesky diffractometer controls”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper THBG005, unpublished.
- P. Saha et al., “Beam loss and beam emittance minimization at J-PARC RCS for simultaneous operation to the MLF and MR”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUAN1, pp. 939-942.
- R. Reimers et al., “Magnets in the PEP Injection Lines”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4027-4030.
- G. Schatz, “Industrial and Environmental Applications of Cyclotrons”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper GI-04, pp. 661-665.
Back to search