Warning
Some papers have malformed authors, please correct this before using these references.
Favourites
For Word
[n] B. S. Levine and A. M. Sessler, “Excitation of a Closed Cylindrical Cavity by a Charged Ring Moving along the Axis at Constant Velocity”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1031-1034.
[n] I. C. Sheng, S. Sharma, and J. Howell, “Thermal Analysis of the Beam Missteering in APS Storage Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1500-1503.
[n] R. J. Averill et al., “Positron-Electron Multicycle Injection at the CEA Colliding Beam Project”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 221-224.
[n] M. J. Lee, E. D. Courant, C. Pellegrini, and A. M. Sessler, “Beam Amplitude Behavior upon Crossing a Linear Coupling Resonance with Damping in One Dimension”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 176-180.
[n] A. Moretti et al., “An 805 MHz Disk and Washer Structure for the Fermilab Linac Upgrade”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-41, pp. 143-145.
[n] A. M. Fadeev, A. A. Blinnikov, S. M. Ivanov, and S. M. Polozov, “A prototype of a Phased Array for Deep Thermoradiotherapy”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB36, pp. 240-242.
[n] D. Mannicke, N. Hauser, and N. Xiong, “Advanced Workflow for Experimental Control”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 521-523. doi:10.18429/JACoW-ICALEPCS2015-TUB3O01
[n] I. C. Sheng, S. Sharma, R. Rotela, and J. Howell, “Thermomechanical Analysis of a Compact-Design High Heat Load Crotch Absorber”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR08, pp. 816-818.
[n] M. J. Boland, Y. E. Tan, and T. M. Mitsuhashi, “Reflective Streak Camera Bunch Length Measurements at the Australian Synchrotron”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3421-3423. doi:10.18429/JACoW-IPAC2014-THPME080
[n] S. E. Toporkov, A. B. Buleiko, and M. V. Lalayan, “Field Optimization Technique of the Multigap H-mode Resonators”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB04, pp. 162-163.
[n] J. M. Heredia et al., “Sigraflex?« Studies for LHC CERN Beam Dump: Summary and Perspective”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3571-3574. doi:10.18429/JACoW-IPAC2021-WEPAB368
[n] M. Justus et al., “Upgrade of the Machine Interlock System for the ELBE Accelerator Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 469-471. doi:10.18429/JACoW-IPAC2014-MOPME044
[n] M. Yamada et al., “The Novel Method of Focusing-SANS with Rotating Magnetic Sextupole Lens and Very Cold Neutrons”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB067, pp. 427-429.
[n] A. Dolinskyy et al., “Orbit Correction System at the Collector Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO006, pp. 1886-1888.
[n] M. Tadano, T. Takahashi, M. Izawa, T. Mitsuhashi, and S. Sakanaka, “Improvement in the Beam Performance by an RF Phase Modulation at the KEK Photon Factory Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A08, pp. 690-692.
[n] Y. C. Yang, C. K. Chan, J.-R. Chen, C. M. Cheng, and G.-Y. Hsiung, “Design of the Water-Cooling System for the Vacuum System of the TPS Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD022, pp. 2546-2548.
[n] J. Conrad et al., “Soft Chemical Polishing and Surface Analysis of Niobium Samples”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3641-3644. doi:10.18429/JACoW-IPAC2018-THPAL012
[n] V. G. Ziemann and L. Hermansson, “Tracking the Helium Balance in FREIA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1202-1204. doi:10.18429/JACoW-IPAC2016-TUPMB047
[n] R. Forster et al., “Electron Cooling Experiments at Fermilab”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2386-2389.
[n] G. A. Voss, “The 19 GeV e -- e- Storage Ring PETRA”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 2970-2974.
[n] A. Chabert, T. T. Luong, and M. Prome, “Separate Sector Cyclotron Beam Dynamics with Space Charge”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1930-1934.
[n] W. Barry, J. Corlett, M. Fahmie, J. Greer, G. Lambertson, and C. Pike, “Status of the PEP-II Transverse Feedback Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P046, pp. 2344-2346.
[n] F. Zimmermann, J. T. Seeman, M. Zolotorev, and W. Stoeffl, “Trapped Macroparticles in Electron Storage Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPG10, pp. 517-519.
[n] S. L. Andrianov et al., “Status of Experiments on Surface Modification of Materials on the Accelerator HIP-1”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB48, pp. 269-271.
[n] R. E. Kirby, K. Skarpaas, and G. J. Collet, “An In-Situ Photocathode Loading System for the SLC Polarized Electron Gun”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3030-3033.
[n] R. Gupta, “Field Quality in Superconducting Magnets for Large Particle Accelerators”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP003G, pp. 2219-2221.
[n] Y. Arimoto et al., “Construction of Six-sector FFAG Ring for Muon Phase Rotation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP071, pp. 3524-3526.
[n] W. J. Corbett et al., “Injected Beam Dynamics in SPEAR3”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC039, pp. 1811-1813.
[n] G. J. Jan et al., “Prototype Bunch Killer System At SRRC”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ16, pp. 2488-2490.
[n] B. Nash et al., “Touschek Lifetime and Momentum Acceptance Measurements for ESRF”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC008, pp. 2921-2923.
[n] P. C. Chiu et al., “TLS Booster Measurement and Observation by New BPM Electronics”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA044, pp. 768-770.
[n] M. Ben Abdillah, “Novel Electrostatic Beam Position Monitors With Enhanced Sensitivity”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 333-335. doi:10.18429/JACoW-IBIC2016-TUPG09
[n] A. Hopper and R. Seviour, “Wave Particle Cherenkov Interactions Mediated via Novel Materials”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1960-1962. doi:10.18429/JACoW-IPAC2016-TUPOY024
[n] M. Ounsy, S. Pierre-Joseph Zephir, G. Viguier, and E. De Ley, “Using an Expert System for Accelerators Tuning and Automation of Operating Failure Checks”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOCB04, pp. 1434-1437.
[n] J. Shmoys, B. Cheo, and R. Jones, “Cascaded Transmission Line Model for Global DTL Analysis”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-12, pp. 332-334.
[n] David Sagan, Yuri Orlov, “Ion Trapping in the CESR B-factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1839-1842.
[n] M. Masci, D. Perini, and L. Baudin, “Mechanical design of the 12 T superconducting dipole. An accelerator-fit, Nb₃Sn double aperture magnet”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2843-2846. doi:10.18429/JACoW-IPAC2024-WEPS63
[n] V. C. Kempson, J. A. Dobbing, C. E. Hansen, N. Hauge, and G. Hilleke, “Pulsed Magnets and Pulser Units for the Booster and Storage Ring of the Diamond Light Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS028, pp. 3341-3343.
[n] N. Xiong, N. Hauser, and D. Mannicke, “Python Scripting for Instrument Control and Online Data Treatment”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 869-872. doi:10.18429/JACoW-ICALEPCS2015-WEPGF071
[n] N. Xiong, P. Hathaway, N. Hauser, and T. K. Lam, “Multi-platform Processor Framework for Data Analysis, Data Acquisition and Simulation”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP076, pp. 815-817.
[n] H. Li, K. J. Gajewski, L. Hermansson, M. Jobs, J. M. Y. Ruber, and R. Santiago Kern, “ESS Spoke Cavity Conditioning at FREIA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1074-1076. doi:10.18429/JACoW-IPAC2017-MOPVA094
[n] A. Moretti, M. Popovic, E. S. M. McCrory, F. G. Garcia, and T. K. Kroc, “Continued Monitoring of the Conditioning of the Fermilab Linac 805 MHz Cavities”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP029, pp. 464-466.
[n] N. Andreev et al., “Field Quality of Quadrupole R&D Models for the LHC IR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP102, pp. 3194-3196.
[n] M. Kitaguchi et al., “Accelerator/Decelerator of Slow Neutrons”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MO3A04, pp. 133-137.
[n] G. Portmann, C. Steier, and A. Young, “Commissioning of the First Elliptically Polarizing Undulator at the ALS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A04, pp. 2343-2345.
[n] R. Losito et al., “The PHIN Photoinjector for the CTF3 Drive Beam”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS059, pp. 2517-2519.
[n] J. N. Bai et al., “Bunch to Bucket Transfer System for FAIR”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 980-983. doi:10.18429/JACoW-ICALEPCS2015-WEPGF119
[n] F. Hug, M. Arnold, T. Bahlo, J. Pforr, and N. Pietralla, “Beam Based Alignment of SRF Cavities in an Electron Injector Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4219-4222. doi:10.18429/JACoW-IPAC2018-THPMF064
[n] M. Steigerwald et al., “The New Polarized Beam Injection at MAMI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP02E, pp. 1430-1432.
[n] A. Oeftiger, H. Bartosik, A. Findlay, S. Hancock, and G. Rumolo, “Flat Bunches with a Hollow Distribution for Space Charge Mitigation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 652-655. doi:10.18429/JACoW-IPAC2016-MOPOR023
[n] S. P. Antipov et al., “Experimental Test of Semiconductor Dechirper”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1932-1934. doi:10.18429/JACoW-IPAC2015-TUPMA043
[n] Y. Hwang, T. Tajima, G. G. Anderson, C. P. J. Barty, D. J. Gibson, and R. A. Marsh, “Study of Medical Applications of Compact Laser-Compton Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3656-3658. doi:10.18429/JACoW-IPAC2017-THOAB1
[n] J. M. Byrd et al., “Transient Beam Loading in the ALS Harmonic RF System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A01, pp. 1113-1115.
[n] T. Junquera et al., “Design of a New Horizontal Test Cryostat for SCRF Cavities at the Uppsala University”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP080, pp. 328-330.
[n] Y. Hirao et al., “The INS 176-cm Sector Focusing Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-16, pp. 103-106.
[n] EE. Lee, K. H. Chung, H. G. Joo, S. K. Kauh, and S. K. Ko, “Physics Design of a Photo Fission Ion Source (PHIS)”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC063, pp. 4200-4201.
[n] Z. Q. Xie, D. Collins, S. A. Lundgren, and C. M. Lyneis, “Performance of the LBL AECR Source at Various Frequencies”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VIII-02, pp. 308-311.
[n] M. Svandrlik et al., “The New Elettra Booster Injector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN032, pp. 983-985.
[n] D. J. Clark, C. M. Lyneis, and Y. Jongen, “Progress on the LBL ECR Heavy Ion Source”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B32, pp. 133-136.
[n] J. Einstein, S. Biedron, H. Freund, S. V. Milton, and G. Dattoli, “Simulation and Analysis of Laser/Electron Beam interaction for use as a Free Electron Laser”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1875-1877. doi:10.18429/JACoW-IPAC2015-TUPMA019
For LaTeX
Use Complete Form
For BibTeX
References
- B. S. Levine and A. M. Sessler, “Excitation of a Closed Cylindrical Cavity by a Charged Ring Moving along the Axis at Constant Velocity”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1031-1034.
- I. C. Sheng, S. Sharma, and J. Howell, “Thermal Analysis of the Beam Missteering in APS Storage Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1500-1503.
- R. J. Averill et al., “Positron-Electron Multicycle Injection at the CEA Colliding Beam Project”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 221-224.
- M. J. Lee, E. D. Courant, C. Pellegrini, and A. M. Sessler, “Beam Amplitude Behavior upon Crossing a Linear Coupling Resonance with Damping in One Dimension”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 176-180.
- A. Moretti et al., “An 805 MHz Disk and Washer Structure for the Fermilab Linac Upgrade”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-41, pp. 143-145.
- A. M. Fadeev, A. A. Blinnikov, S. M. Ivanov, and S. M. Polozov, “A prototype of a Phased Array for Deep Thermoradiotherapy”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB36, pp. 240-242.
- D. Mannicke, N. Hauser, and N. Xiong, “Advanced Workflow for Experimental Control”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 521-523.
- I. C. Sheng, S. Sharma, R. Rotela, and J. Howell, “Thermomechanical Analysis of a Compact-Design High Heat Load Crotch Absorber”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR08, pp. 816-818.
- M. J. Boland, Y. E. Tan, and T. M. Mitsuhashi, “Reflective Streak Camera Bunch Length Measurements at the Australian Synchrotron”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3421-3423.
- S. E. Toporkov, A. B. Buleiko, and M. V. Lalayan, “Field Optimization Technique of the Multigap H-mode Resonators”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB04, pp. 162-163.
- J. M. Heredia et al., “Sigraflex?« Studies for LHC CERN Beam Dump: Summary and Perspective”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3571-3574.
- M. Justus et al., “Upgrade of the Machine Interlock System for the ELBE Accelerator Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 469-471.
- M. Yamada et al., “The Novel Method of Focusing-SANS with Rotating Magnetic Sextupole Lens and Very Cold Neutrons”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB067, pp. 427-429.
- A. Dolinskyy et al., “Orbit Correction System at the Collector Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO006, pp. 1886-1888.
- M. Tadano, T. Takahashi, M. Izawa, T. Mitsuhashi, and S. Sakanaka, “Improvement in the Beam Performance by an RF Phase Modulation at the KEK Photon Factory Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A08, pp. 690-692.
- Y. C. Yang, C. K. Chan, J.-R. Chen, C. M. Cheng, and G.-Y. Hsiung, “Design of the Water-Cooling System for the Vacuum System of the TPS Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD022, pp. 2546-2548.
- J. Conrad et al., “Soft Chemical Polishing and Surface Analysis of Niobium Samples”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3641-3644.
- V. G. Ziemann and L. Hermansson, “Tracking the Helium Balance in FREIA”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1202-1204.
- R. Forster et al., “Electron Cooling Experiments at Fermilab”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2386-2389.
- G. A. Voss, “The 19 GeV e -- e- Storage Ring PETRA”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 2970-2974.
- A. Chabert, T. T. Luong, and M. Prome, “Separate Sector Cyclotron Beam Dynamics with Space Charge”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1930-1934.
- W. Barry, J. Corlett, M. Fahmie, J. Greer, G. Lambertson, and C. Pike, “Status of the PEP-II Transverse Feedback Systems”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P046, pp. 2344-2346.
- F. Zimmermann, J. T. Seeman, M. Zolotorev, and W. Stoeffl, “Trapped Macroparticles in Electron Storage Rings”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPG10, pp. 517-519.
- S. L. Andrianov et al., “Status of Experiments on Surface Modification of Materials on the Accelerator HIP-1”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB48, pp. 269-271.
- R. E. Kirby, K. Skarpaas, and G. J. Collet, “An In-Situ Photocathode Loading System for the SLC Polarized Electron Gun”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3030-3033.
- R. Gupta, “Field Quality in Superconducting Magnets for Large Particle Accelerators”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP003G, pp. 2219-2221.
- Y. Arimoto et al., “Construction of Six-sector FFAG Ring for Muon Phase Rotation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP071, pp. 3524-3526.
- W. J. Corbett et al., “Injected Beam Dynamics in SPEAR3”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC039, pp. 1811-1813.
- G. J. Jan et al., “Prototype Bunch Killer System At SRRC”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ16, pp. 2488-2490.
- B. Nash et al., “Touschek Lifetime and Momentum Acceptance Measurements for ESRF”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC008, pp. 2921-2923.
- P. C. Chiu et al., “TLS Booster Measurement and Observation by New BPM Electronics”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA044, pp. 768-770.
- M. Ben Abdillah, “Novel Electrostatic Beam Position Monitors With Enhanced Sensitivity”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 333-335.
- A. Hopper and R. Seviour, “Wave Particle Cherenkov Interactions Mediated via Novel Materials”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1960-1962.
- M. Ounsy, S. Pierre-Joseph Zephir, G. Viguier, and E. De Ley, “Using an Expert System for Accelerators Tuning and Automation of Operating Failure Checks”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOCB04, pp. 1434-1437.
- J. Shmoys, B. Cheo, and R. Jones, “Cascaded Transmission Line Model for Global DTL Analysis”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-12, pp. 332-334.
- David Sagan, Yuri Orlov, “Ion Trapping in the CESR B-factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1839-1842.
- M. Masci, D. Perini, and L. Baudin, “Mechanical design of the 12 T superconducting dipole. An accelerator-fit, Nb₃Sn double aperture magnet”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS63, pp. 2843-2846.
- V. C. Kempson, J. A. Dobbing, C. E. Hansen, N. Hauge, and G. Hilleke, “Pulsed Magnets and Pulser Units for the Booster and Storage Ring of the Diamond Light Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS028, pp. 3341-3343.
- N. Xiong, N. Hauser, and D. Mannicke, “Python Scripting for Instrument Control and Online Data Treatment”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 869-872.
- N. Xiong, P. Hathaway, N. Hauser, and T. K. Lam, “Multi-platform Processor Framework for Data Analysis, Data Acquisition and Simulation”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP076, pp. 815-817.
- H. Li, K. J. Gajewski, L. Hermansson, M. Jobs, J. M. Y. Ruber, and R. Santiago Kern, “ESS Spoke Cavity Conditioning at FREIA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1074-1076.
- A. Moretti, M. Popovic, E. S. M. McCrory, F. G. Garcia, and T. K. Kroc, “Continued Monitoring of the Conditioning of the Fermilab Linac 805 MHz Cavities”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP029, pp. 464-466.
- N. Andreev et al., “Field Quality of Quadrupole R&D Models for the LHC IR”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP102, pp. 3194-3196.
- M. Kitaguchi et al., “Accelerator/Decelerator of Slow Neutrons”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MO3A04, pp. 133-137.
- G. Portmann, C. Steier, and A. Young, “Commissioning of the First Elliptically Polarizing Undulator at the ALS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2A04, pp. 2343-2345.
- R. Losito et al., “The PHIN Photoinjector for the CTF3 Drive Beam”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS059, pp. 2517-2519.
- J. N. Bai et al., “Bunch to Bucket Transfer System for FAIR”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 980-983.
- F. Hug, M. Arnold, T. Bahlo, J. Pforr, and N. Pietralla, “Beam Based Alignment of SRF Cavities in an Electron Injector Linac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4219-4222.
- M. Steigerwald et al., “The New Polarized Beam Injection at MAMI”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP02E, pp. 1430-1432.
- A. Oeftiger, H. Bartosik, A. Findlay, S. Hancock, and G. Rumolo, “Flat Bunches with a Hollow Distribution for Space Charge Mitigation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 652-655.
- S. P. Antipov et al., “Experimental Test of Semiconductor Dechirper”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1932-1934.
- Y. Hwang, T. Tajima, G. G. Anderson, C. P. J. Barty, D. J. Gibson, and R. A. Marsh, “Study of Medical Applications of Compact Laser-Compton Light Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3656-3658.
- J. M. Byrd et al., “Transient Beam Loading in the ALS Harmonic RF System”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2A01, pp. 1113-1115.
- T. Junquera et al., “Design of a New Horizontal Test Cryostat for SCRF Cavities at the Uppsala University”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP080, pp. 328-330.
- Y. Hirao et al., “The INS 176-cm Sector Focusing Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-16, pp. 103-106.
- EE. Lee, K. H. Chung, H. G. Joo, S. K. Kauh, and S. K. Ko, “Physics Design of a Photo Fission Ion Source (PHIS)”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC063, pp. 4200-4201.
- Z. Q. Xie, D. Collins, S. A. Lundgren, and C. M. Lyneis, “Performance of the LBL AECR Source at Various Frequencies”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VIII-02, pp. 308-311.
- M. Svandrlik et al., “The New Elettra Booster Injector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN032, pp. 983-985.
- D. J. Clark, C. M. Lyneis, and Y. Jongen, “Progress on the LBL ECR Heavy Ion Source”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B32, pp. 133-136.
- J. Einstein, S. Biedron, H. Freund, S. V. Milton, and G. Dattoli, “Simulation and Analysis of Laser/Electron Beam interaction for use as a Free Electron Laser”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1875-1877.
Back to search