Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Schmidt, E. Forest, and P. K. Skowronski, “MAD-X - An Accelerator Design Code”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WESEPP06, pp. 232-232.
[n] M. Odera, Y. Chiba, and T. Kambara, “Status of the Variable Frequency Heavy Ion Linac, RILAC”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S1-8, pp. 28-31.
[n] G. R. Mitchel, J. E. McGregor, and E. P. Stock, “TASCC Bunch Injection and Phase Control System: Review, Operating Experience and Recent Improvements”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F7-05, pp. 392-396.
[n] A. Yamaguchi et al., “A Compact Proton Accelerator System for Cancer Therapy”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P108, pp. 3828-3830.
[n] R. Connolly et al., “Laser Beam-Profile Monitor Development at BNL for SNS”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO204, pp. 21-25.
[n] V. Blackmore, “The Physics Programme of Next MICE Step IV”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP097, pp. 285-287.
[n] R. Wanzenberg, O. Zagorodnova, E. M?â, and B. Salvant, “Calculation of Wakefields and Higher Order Modes for the Vacuum Chamber of the CMS, ATLAS, ALICE and LHCb Experiments for the HL-LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3081-3083. doi:10.18429/JACoW-IPAC2017-WEPIK066
[n] D. Berkaev, I. Ostanin, V. Kozak, V. Cherepanov, V. Repkov, and E. Bykov, “BEAM MEASUREMENT SYSTEM OF VEPP-2000 INJECTION CHANNELS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH15, pp. XX-XX.
[n] G. Gross, R. Cassel, and T. Mattison, “Development of Epoxy Potting for High Voltage Insulation at SLAC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2334-2337.
[n] R. Li, C. L. Guo, M. M. Huang, and T. J. Shen, “Operation Status of SSRF Power Supplies and Interlocks for Top-up Operation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO007, pp. 3349-3351.
[n] R. Boni et al., “Design of the e+/e- Fracscati Linear Accelerator for DaPhine”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 611-614.
[n] H. G. Blosser, D. A. Johnson, and J. Schubert, “Invited Paper: Problems and Accomplishments of Superconducting Cyclotrons”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper N-01, pp. 674-684.
[n] S. W. Jang et al., “The Development of Button Type BPM Electronics for RAON”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 362-364. doi:10.18429/JACoW-IPAC2017-MOPAB100
[n] L. Yang et al., “Low Q Cavity BPM Study for the Beam Position Measurement of Nanosecond Spaced Electron Bunches”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1881-1883. doi:10.18429/JACoW-IPAC2018-WEPAF027
[n] N. Akasaka, H. Koiso, and K. Oide, “Operation Software for Commissioning of KEKB Linac Programmed with SAD”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D043, pp. 495-497.
[n] M. Arnold et al., “ERL Operation of S-DALINAC”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 1-4. doi:10.18429/JACoW-ERL2019-MOCOXBS02
[n] H. Huang et al., “Simulation of Transparent Spin Experiment in RHIC”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 789-791. doi:10.18429/JACoW-NAPAC2019-WEPLS11
[n] A. Schempp et al., “Zero-Mode-RFQ Development in Frankfurt”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0006, pp. 100-102.
[n] F. Saeidi, E. Ahmadi, and H. Ghasem, “Effects of Insertion Devices in the High Field Lattice Structure of ILSF Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA024, pp. 124-126.
[n] M. Tanigaki et al., “Current Status of a Carborne Survey System, KURAMA”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA06, pp. 926-929.
[n] Yu. K. Alekseev et al., “DIFFRACTION ACCELERATOR OF CHARGED PARTICLES”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBP22, pp. XX-XX.
[n] P. Shrivastava, P. Mohania, J. Mulchandani, and Y. W. Wahnmode, “Performance of 6 MW Peak, 25kW Average Power Microwave System for 10 MeV, 10 kW Electron LINAC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA015, pp. 649-651.
[n] R. M. Zwaska, S. C. Childress, A. I. Drozhdin, N. V. Mokhov, and I. S. Tropin, “Beam Loss Protection for a 2.3 Megawatt LBNE Proton Beam”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD041, pp. 454-456.
[n] G. Eremeev and H. Padamsee, “High Field Q-Slope's Studies Using Thermometry”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA08, pp. 189-192.
[n] W. Barry et al., “Design of the PEP-II Transverse Coupled-Bunch Feedback System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ08, pp. 2681-2683.
[n] S. V. Kuzikov, Yu. Danilov, and A. A. Vikharev, “Efficiency Enhancement of Active High-Power Pulse Compressors”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP132, pp. 2803-2805.
[n] M. G. Giacchini et al., “Hyperarchiver: An Epics Archiver Prototype Based on Hypertable”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN012, pp. 114-116.
[n] J. van de Walle et al., “The S2C2: From Source to Extraction”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 285-289. doi:10.18429/JACoW-Cyclotrons2016-THB01
[n] Y. Chung et al., “Closed Orbit Feedback with Digital Signal Processing”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1592-1595.
[n] N. Hauser, S. Wimalaratne, and C. U. Felzmann, “ANSTO, Australian Synchrotron, Metadata Catalogues and the Australian National Data Service”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUMIB05, pp. 529-531.
[n] K. Kennedy, T. Henderson, and J. Meneghetti, “Vauum System for the LBL Advanced Light Source (ALS)”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 560-563.
[n] B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
[n] M. I. Ayzatsky et al., “THE INVESTIGATIONS OF THE BEAM CHARACTERISTICS IN THE ELECTRON INJECTOR BASED ON RESONANCE SYSTEM WITH EVANESCENT OSCILLATIONS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUIP14, pp. XX-XX.
[n] J. Henness, C. L. Kang, J. Kirchgessner, J. Riedel, and F. C. Shoemaker, “Control of the Beam Spill at the PPA”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1071-1074.
[n] M. P. Bourgarel, L. Bex, P. Di Bernardo, and E. Plawski, “GANIL Axial Injection Design with an ECR Ion Source”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B40, pp. 161-164.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Schmidt, E. Forest, and P. K. Skowronski, “MAD-X - An Accelerator Design Code”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WESEPP06, pp. 232-232.
- M. Odera, Y. Chiba, and T. Kambara, “Status of the Variable Frequency Heavy Ion Linac, RILAC”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S1-8, pp. 28-31.
- G. R. Mitchel, J. E. McGregor, and E. P. Stock, “TASCC Bunch Injection and Phase Control System: Review, Operating Experience and Recent Improvements”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F7-05, pp. 392-396.
- A. Yamaguchi et al., “A Compact Proton Accelerator System for Cancer Therapy”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P108, pp. 3828-3830.
- R. Connolly et al., “Laser Beam-Profile Monitor Development at BNL for SNS”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO204, pp. 21-25.
- V. Blackmore, “The Physics Programme of Next MICE Step IV”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP097, pp. 285-287.
- R. Wanzenberg, O. Zagorodnova, E. M?â, and B. Salvant, “Calculation of Wakefields and Higher Order Modes for the Vacuum Chamber of the CMS, ATLAS, ALICE and LHCb Experiments for the HL-LHC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3081-3083.
- D. Berkaev, I. Ostanin, V. Kozak, V. Cherepanov, V. Repkov, and E. Bykov, “BEAM MEASUREMENT SYSTEM OF VEPP-2000 INJECTION CHANNELS”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH15, pp. XX-XX.
- G. Gross, R. Cassel, and T. Mattison, “Development of Epoxy Potting for High Voltage Insulation at SLAC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2334-2337.
- R. Li, C. L. Guo, M. M. Huang, and T. J. Shen, “Operation Status of SSRF Power Supplies and Interlocks for Top-up Operation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO007, pp. 3349-3351.
- R. Boni et al., “Design of the e+/e- Fracscati Linear Accelerator for DaPhine”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 611-614.
- H. G. Blosser, D. A. Johnson, and J. Schubert, “Invited Paper: Problems and Accomplishments of Superconducting Cyclotrons”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper N-01, pp. 674-684.
- S. W. Jang et al., “The Development of Button Type BPM Electronics for RAON”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 362-364.
- L. Yang et al., “Low Q Cavity BPM Study for the Beam Position Measurement of Nanosecond Spaced Electron Bunches”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1881-1883.
- N. Akasaka, H. Koiso, and K. Oide, “Operation Software for Commissioning of KEKB Linac Programmed with SAD”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D043, pp. 495-497.
- M. Arnold et al., “ERL Operation of S-DALINAC”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 1-4.
- H. Huang et al., “Simulation of Transparent Spin Experiment in RHIC”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 789-791.
- A. Schempp et al., “Zero-Mode-RFQ Development in Frankfurt”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0006, pp. 100-102.
- F. Saeidi, E. Ahmadi, and H. Ghasem, “Effects of Insertion Devices in the High Field Lattice Structure of ILSF Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA024, pp. 124-126.
- M. Tanigaki et al., “Current Status of a Carborne Survey System, KURAMA”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCA06, pp. 926-929.
- Yu. K. Alekseev et al., “DIFFRACTION ACCELERATOR OF CHARGED PARTICLES”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THBP22, pp. XX-XX.
- P. Shrivastava, P. Mohania, J. Mulchandani, and Y. W. Wahnmode, “Performance of 6 MW Peak, 25kW Average Power Microwave System for 10 MeV, 10 kW Electron LINAC”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA015, pp. 649-651.
- R. M. Zwaska, S. C. Childress, A. I. Drozhdin, N. V. Mokhov, and I. S. Tropin, “Beam Loss Protection for a 2.3 Megawatt LBNE Proton Beam”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD041, pp. 454-456.
- G. Eremeev and H. Padamsee, “High Field Q-Slope's Studies Using Thermometry”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUA08, pp. 189-192.
- W. Barry et al., “Design of the PEP-II Transverse Coupled-Bunch Feedback System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ08, pp. 2681-2683.
- S. V. Kuzikov, Yu. Danilov, and A. A. Vikharev, “Efficiency Enhancement of Active High-Power Pulse Compressors”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP132, pp. 2803-2805.
- M. G. Giacchini et al., “Hyperarchiver: An Epics Archiver Prototype Based on Hypertable”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN012, pp. 114-116.
- J. van de Walle et al., “The S2C2: From Source to Extraction”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 285-289.
- Y. Chung et al., “Closed Orbit Feedback with Digital Signal Processing”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1592-1595.
- N. Hauser, S. Wimalaratne, and C. U. Felzmann, “ANSTO, Australian Synchrotron, Metadata Catalogues and the Australian National Data Service”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUMIB05, pp. 529-531.
- K. Kennedy, T. Henderson, and J. Meneghetti, “Vauum System for the LBL Advanced Light Source (ALS)”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 560-563.
- B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
- M. I. Ayzatsky et al., “THE INVESTIGATIONS OF THE BEAM CHARACTERISTICS IN THE ELECTRON INJECTOR BASED ON RESONANCE SYSTEM WITH EVANESCENT OSCILLATIONS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUIP14, pp. XX-XX.
- J. Henness, C. L. Kang, J. Kirchgessner, J. Riedel, and F. C. Shoemaker, “Control of the Beam Spill at the PPA”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1071-1074.
- M. P. Bourgarel, L. Bex, P. Di Bernardo, and E. Plawski, “GANIL Axial Injection Design with an ECR Ion Source”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B40, pp. 161-164.
Back to search