Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. S. Lee, B. H. Choi, J. H. Ha, J. K. Kil, and J. H. Lee, “Enhancement of IC Tray's Surface Conductivity Using Accelerator Technology”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH315, pp. 2799-2801.
[n] K. Eppley et al., “Operation of a 1.3 GHz, 10 MW Multiple Beam Klystron”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP39, pp. 693-693.
[n] P. Ferracin, W. Scandale, E. Todesco, P. Tropea, and I. Vanenkov, “Modelization of the Thermo-mechanical Structure of the LHC Main Dipole and Influence on Field Quality”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THOAF101, pp. 330-332.
[n] Z. Baraissov, D. A. Muller, M. Liepe, and Z. Sun, “Measuring Composition Variations and Lattice Strain in Nb3Sn Films”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper SUPFDV011, pp..
[n] G. Chiozzi et al., “The ALMA Common Software (ACS): Status and Developments”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP703, pp. XX-XX.
[n] J. Y. Huang, W.-H. Hwang, D. T. Kim, S. H. Nam, and S. J. Park, “Improved Closed Orbit Measurement System for PLS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH074, pp. 1384-1386.
[n] S. F. Hill and M. J. Pugh, “Improvements in Vessel Impedance Measurements at Daresbury”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1339-1342.
[n] C. Bertone and I. Ruehl, “Transport and Handling of LHC Components: a Permanent Challenge”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT011, pp. 1840-1842.
[n] M. Xia, H. Li, Y. Xu, Z. Zhao, and N. Yang, “Study of the radiation field from multiple out-coupling holes in an infrared free electron laser oscillator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 435-437. doi:10.18429/JACoW-IPAC2024-MOPG73
[n] D. Filimonov, S. Karnaev, B. Levichev, and S. Smirnov, “Database and Channel Access on the VEPP-4 Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP029, pp. XX-XX.
[n] S. W. Chang et al., “Development of a water cooling system for solid-state power amplifiers at NSRRC”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB061, unpublished.
[n] Y. Petenev et al., “Precise Measurement of Small Currents at the MLS”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 118-121. doi:10.18429/JACoW-IBIC2018-MOPC03
[n] F.-T. Chung and F.-Y. Chang, “Construction and Installation of a 320kW Solid State Power Amplifier for Taiwan Photo Source.”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPM023, unpublished.
[n] A. Zaltsman et al., “Design, Construction, System Integration, and Test Results of the 1 MW CW RF System for the E-Gun Cavity in the Energy Recovery Linac at Brookhaven National Laboratory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP080, pp. 1014-1016.
[n] U. Trinks et al., “The TRITON - A Superconducting Cyclotron with Separated Orbits”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 574-577.
[n] M. Aiba et al., “Development of a FFAG Proton Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B21, pp. 581-583.
[n] M. Maggiore, L. Calabretta, D. Campo, and L. A. C. Piazza And D, “Progress On The Design Studies Of The 300 AMeV Superconducting Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 163-165.
[n] F. Marti and A. Gavalya, “Axial Injection in the K500 Superconducting Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-05, pp. 484-487.
[n] Y. G??mez Mart?¡nez et al., “MYRRHA 80 kW CW RF Coupler Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4115-4117. doi:10.18429/JACoW-IPAC2019-THPTS007
[n] R. Assmann, B. Dehning, J. Matheson, and J. Prochnow, “Nonlinear Response of Orbit Monitors”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B10, pp. 412-414.
[n] R. F. Koontz, S. Gold, R. Cassel, D. Ficklin, K. Harris, and J. de Lamare, “Pulse Modulator Developments in Support of Klystron Testing at SLAC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1318-1321.
[n] A. Kobayashi et al., “Studies on Coherent Multi-Bunch Tune Shifts with Different Bunch Spacing at the J-PARC Main Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 167-170. doi:10.18429/JACoW-IPAC2019-MOPGW036
[n] G. von Holtey, W. Niessen, and P. Roudeau, “Synchrotron Radiation Masks for LEP2”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 454-457.
[n] M. L. Mallory, J. Kuchar, P. S. Miller, and E. D. Hudson, “Vacuum Measurements of the K500 Cyclotron Accelerator Chamber”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I3-05, pp. 404-406.
For LaTeX
Use Complete Form
For BibTeX
References
- J. S. Lee, B. H. Choi, J. H. Ha, J. K. Kil, and J. H. Lee, “Enhancement of IC Tray's Surface Conductivity Using Accelerator Technology”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH315, pp. 2799-2801.
- K. Eppley et al., “Operation of a 1.3 GHz, 10 MW Multiple Beam Klystron”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP39, pp. 693-693.
- P. Ferracin, W. Scandale, E. Todesco, P. Tropea, and I. Vanenkov, “Modelization of the Thermo-mechanical Structure of the LHC Main Dipole and Influence on Field Quality”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THOAF101, pp. 330-332.
- Z. Baraissov, D. A. Muller, M. Liepe, and Z. Sun, “Measuring Composition Variations and Lattice Strain in Nb3Sn Films”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper SUPFDV011, pp..
- G. Chiozzi et al., “The ALMA Common Software (ACS): Status and Developments”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP703, pp. XX-XX.
- J. Y. Huang, W.-H. Hwang, D. T. Kim, S. H. Nam, and S. J. Park, “Improved Closed Orbit Measurement System for PLS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH074, pp. 1384-1386.
- S. F. Hill and M. J. Pugh, “Improvements in Vessel Impedance Measurements at Daresbury”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1339-1342.
- C. Bertone and I. Ruehl, “Transport and Handling of LHC Components: a Permanent Challenge”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT011, pp. 1840-1842.
- M. Xia, H. Li, Y. Xu, Z. Zhao, and N. Yang, “Study of the radiation field from multiple out-coupling holes in an infrared free electron laser oscillator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG73, pp. 435-437.
- D. Filimonov, S. Karnaev, B. Levichev, and S. Smirnov, “Database and Channel Access on the VEPP-4 Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP029, pp. XX-XX.
- S. W. Chang et al., “Development of a water cooling system for solid-state power amplifiers at NSRRC”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB061, this conference.
- Y. Petenev et al., “Precise Measurement of Small Currents at the MLS”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 118-121.
- F.-T. Chung and F.-Y. Chang, “Construction and Installation of a 320kW Solid State Power Amplifier for Taiwan Photo Source.”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM023, unpublished.
- A. Zaltsman et al., “Design, Construction, System Integration, and Test Results of the 1 MW CW RF System for the E-Gun Cavity in the Energy Recovery Linac at Brookhaven National Laboratory”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP080, pp. 1014-1016.
- U. Trinks et al., “The TRITON - A Superconducting Cyclotron with Separated Orbits”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 574-577.
- M. Aiba et al., “Development of a FFAG Proton Synchrotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP1B21, pp. 581-583.
- M. Maggiore, L. Calabretta, D. Campo, and L. A. C. Piazza And D, “Progress On The Design Studies Of The 300 AMeV Superconducting Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 163-165.
- F. Marti and A. Gavalya, “Axial Injection in the K500 Superconducting Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I6-05, pp. 484-487.
- Y. G??mez Mart?¡nez et al., “MYRRHA 80 kW CW RF Coupler Design”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4115-4117.
- R. Assmann, B. Dehning, J. Matheson, and J. Prochnow, “Nonlinear Response of Orbit Monitors”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6B10, pp. 412-414.
- R. F. Koontz, S. Gold, R. Cassel, D. Ficklin, K. Harris, and J. de Lamare, “Pulse Modulator Developments in Support of Klystron Testing at SLAC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1318-1321.
- A. Kobayashi et al., “Studies on Coherent Multi-Bunch Tune Shifts with Different Bunch Spacing at the J-PARC Main Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 167-170.
- G. von Holtey, W. Niessen, and P. Roudeau, “Synchrotron Radiation Masks for LEP2”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 454-457.
- M. L. Mallory, J. Kuchar, P. S. Miller, and E. D. Hudson, “Vacuum Measurements of the K500 Cyclotron Accelerator Chamber”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I3-05, pp. 404-406.
Back to search