Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. R. Lockner and M. Friedman, “The NRL Autoaccelerator Concept”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4237-4239.
[n] K. W. Leo et al., “Permanent Magnet ECRIS for the KEK Digital Accelerator”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUPOT015, pp. 150-152.
[n] H. Schweickert, “SULEICKA: A Proposal for a Superconducting Light Ion Cyclotron at Karlsruhe”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper CP-03, pp. 221-223.
[n] J. R. Leibfritz et al., “Status of the Fermilab Electron Cooling Project”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT151, pp. 1485-1487.
[n] R. M. Thurman-Keup, A. S. Johnson, A. H. Lumpkin, J. C. T. Thangaraj, D. H. Zhang, and W. Blokland, “Initial Characterization of a Commercial Electron Gun for Profiling High Intensity Proton Beams in Project X”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP225, pp. 525-527.
[n] S. M. Pruss, “A Design for a Beam Halo Scraper System for the Tevatron Collider”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2340-2342.
[n] W. Chamberlain, “Operating Experience with a Superconducting Magnet in an Accelerator Experiment”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 723-728.
[n] M. K. Craddock and J. R. Richardson, “Magnetic Field Tolerances for the TRIUMF 500 Me V H- Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 415-421.
[n] V. A. Alexandrof et al., “Results of Final Focus Test Beam”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAG01, pp. 2742-2746.
[n] V. Kumar and K.-J. Kim, “Effect of Energy Spread on Start Current of Smith-Purcell BWO”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH004, pp. 13-16.
[n] K. L. F. Bane et al., “First Bunch Length Studies in the SLC South Final Focus”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP19H, pp. 487-492.
[n] M. Tomizawa et al., “Slow Beam Extraction TARN-II”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1488-1491.
[n] E. Asensi Conejero et al., “The Cryomodule Test Stands for the European Spallation Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1064-1067. doi:10.18429/JACoW-IPAC2017-MOPVA089
[n] J. Yoon et al., “Status of the power coupler for the half wave resonator in Institute for Rare Isotope Science”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 220-223. doi:10.18429/JACoW-SRF2025-MOP63
[n] M. Masuzawa et al., “Commissioning Status of SuperKEKB Main Ring Magnet System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2933-2935. doi:10.18429/JACoW-IPAC2017-WEPIK010
[n] V. Kumar and K.-J. Kim, “Optimization of Parameters of Smith-Purcell BWO”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH014, pp. 67-70.
[n] Y. Kanai et al., “Eddy Field Measurement by using Search Coils for Bending Magnet”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP162, pp. 3348-3350.
[n] K. Sakaue et al., “Study on Cherenkov Laser Oscillator Using Tilted Electron Bunches”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 371-373. doi:10.18429/JACoW-FEL2017-TUP067
[n] A. A. Sulimov et al., “Description and First Experience with the RF Measurement Procedure for the European XFEL SC Cavity Production”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC086, pp. 277-279.
[n] W. M. Sharp, A. Sessler, J. Kim, and H. Henke, “The Standing Wave FEL/TBA: Realistic Cavity Geometry and Energy Extraction”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2593-2596.
[n] D. Reistad, B. G?Ñlnander, K. Rathsman, and A. O. Sidorin, “Calculations on High-energy Electron Cooling in the HESR”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper MOA2C05, pp. 44-48.
[n] Dr. Kuroda et al., “Development of Compact Soft X-ray Source Based on Laser Undulator”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS27, pp. XX-XX.
[n] A. Koschik, H. Burkhardt, T. Risselada, and F. Schmidt, “On the Implementation of Experimental Solenoids in MAD-X and their Effect on Coupling in the LHC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH043, pp. 2011-2013.
[n] J. M. Nogiec et al., “A Distributed Monitoring and Control System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P049, pp. 3713-3715.
[n] C. M. Lyneis, “Invited Paper: Operational Performance of the LBL 88-Inch Cyclotron with an ECR Source”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper M-02, pp. 707-712.
For LaTeX
Use Complete Form
For BibTeX
References
- T. R. Lockner and M. Friedman, “The NRL Autoaccelerator Concept”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4237-4239.
- K. W. Leo et al., “Permanent Magnet ECRIS for the KEK Digital Accelerator”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper TUPOT015, pp. 150-152.
- H. Schweickert, “SULEICKA: A Proposal for a Superconducting Light Ion Cyclotron at Karlsruhe”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper CP-03, pp. 221-223.
- J. R. Leibfritz et al., “Status of the Fermilab Electron Cooling Project”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT151, pp. 1485-1487.
- R. M. Thurman-Keup, A. S. Johnson, A. H. Lumpkin, J. C. T. Thangaraj, D. H. Zhang, and W. Blokland, “Initial Characterization of a Commercial Electron Gun for Profiling High Intensity Proton Beams in Project X”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP225, pp. 525-527.
- S. M. Pruss, “A Design for a Beam Halo Scraper System for the Tevatron Collider”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2340-2342.
- W. Chamberlain, “Operating Experience with a Superconducting Magnet in an Accelerator Experiment”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 723-728.
- M. K. Craddock and J. R. Richardson, “Magnetic Field Tolerances for the TRIUMF 500 Me V H- Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 415-421.
- V. A. Alexandrof et al., “Results of Final Focus Test Beam”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAG01, pp. 2742-2746.
- V. Kumar and K.-J. Kim, “Effect of Energy Spread on Start Current of Smith-Purcell BWO”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH004, pp. 13-16.
- K. L. F. Bane et al., “First Bunch Length Studies in the SLC South Final Focus”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP19H, pp. 487-492.
- M. Tomizawa et al., “Slow Beam Extraction TARN-II”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1488-1491.
- E. Asensi Conejero et al., “The Cryomodule Test Stands for the European Spallation Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1064-1067.
- J. Yoon et al., “Status of the power coupler for the half wave resonator in Institute for Rare Isotope Science”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, pp. 220-223.
- M. Masuzawa et al., “Commissioning Status of SuperKEKB Main Ring Magnet System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2933-2935.
- V. Kumar and K.-J. Kim, “Optimization of Parameters of Smith-Purcell BWO”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH014, pp. 67-70.
- Y. Kanai et al., “Eddy Field Measurement by using Search Coils for Bending Magnet”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP162, pp. 3348-3350.
- K. Sakaue et al., “Study on Cherenkov Laser Oscillator Using Tilted Electron Bunches”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 371-373.
- A. A. Sulimov et al., “Description and First Experience with the RF Measurement Procedure for the European XFEL SC Cavity Production”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC086, pp. 277-279.
- W. M. Sharp, A. Sessler, J. Kim, and H. Henke, “The Standing Wave FEL/TBA: Realistic Cavity Geometry and Energy Extraction”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2593-2596.
- D. Reistad, B. G?Ñlnander, K. Rathsman, and A. O. Sidorin, “Calculations on High-energy Electron Cooling in the HESR”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper MOA2C05, pp. 44-48.
- Dr. Kuroda et al., “Development of Compact Soft X-ray Source Based on Laser Undulator”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS27, pp. XX-XX.
- A. Koschik, H. Burkhardt, T. Risselada, and F. Schmidt, “On the Implementation of Experimental Solenoids in MAD-X and their Effect on Coupling in the LHC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH043, pp. 2011-2013.
- J. M. Nogiec et al., “A Distributed Monitoring and Control System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P049, pp. 3713-3715.
- C. M. Lyneis, “Invited Paper: Operational Performance of the LBL 88-Inch Cyclotron with an ECR Source”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper M-02, pp. 707-712.
Back to search
