JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. Kaji et al., “Upgrade of beam abort system at the SuperKEKB positron ring”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3037-3039. doi:10.18429/JACoW-IPAC2025-THPS033
[n]	C. Hernalsteens et al., “Betatron Tune Characterization of the Rutgers 12-Inch Cyclotron for Different Magnetic Poles Configurations”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 136-139. doi:10.18429/JACoW-IPAC2022-MOPOST033
[n]	A. Pérez et al., “Development of deuterium-deuterium compact neutron source”, in Proc. ECRIS'24, Darmstadt, Germany, Sep. 2024, pp. 23-25. doi:10.18429/JACoW-ECRIS2024-MOD1
[n]	C.-Y. Tan and J. M. Steimel, “The Effect of Noise on Transverse Emittance Growth in the Tevatron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH088, pp. 1874-1876. 
[n]	P. D. Meruga et al., “Evaluation of an X-band LLRF prototype for the EuPRAXIA@SPARC_LAB LINAC”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3054-3057. doi:10.18429/JACoW-IPAC2025-THPS042
[n]	N. Chauvin et al., “Status of the FAIR Proton Source and LEBT”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP015, pp. 863-865. 
[n]	A. Asoyan et al., “Beam-based alignment of magnetic system in AREAL linear accelerator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2978-2981. doi:10.18429/JACoW-IPAC2024-THPC08
[n]	D. Tonini et al., “Morphology of Niobium Films Sputtered at Different Target-Substrate Angle”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP11, pp. 614-621. 
[n]	R. Geometrante, “Building a Global, Collaborative Accelerator Economy: Summary of the IPAC 2022 Industrial Session”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper MOODE3, unpublished. 
[n]	A. V. Shemyakin and C. M. Baffes, “High Power Density Test of PXIE MEBT Absorber Prototype”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP055, pp. 973-975. 
[n]	T. Misu et al., “Development of Compact FFAG Accelerator for Heavy Ion Radiotherapy”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE098, pp. 599-601. 
[n]	X. Y. Wu and M. M. Gordon, “Magnetic Channel Design for a 250 MeV Superconducting Synchrocyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F6-09, pp. 361-364. 
[n]	K. Umemori et al., “Experimental Study of Positron Production from Monocrystalline Targets at the KEKB Injector Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP091, pp. 797-799. 
[n]	L. Eley et al., “Investigating X-ray detector systems using Monte Carlo techniques”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3617-3620. doi:10.18429/JACoW-IPAC2024-THPR47
[n]	F. E. Mills, R. Koul, and F. Lopez, “Effect of Magnet Sorting Using a Simple Resonance Cancellation Method on the RMS Orbit Distortion at the APS Injector Synchrotron”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2922-2924. 
[n]	P. Nama, A. Pathak, and R. Varma, “Design and Optimization of a 100 kV DC Thermionic Electron Gun and Transport Channel for a 1.3 GHz High Intensity Compact Superconducting Electron Accelerator (HICSEA)”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 65-68. doi:10.18429/JACoW-LINAC2022-MOPOJO17
[n]	S. Bhattacharyya, R. K. Yedavalli, and A. Mukherjee, “Fast Beam Tuning for Accelerator Driven Systems”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP081, pp. 2897-2899. 
[n]	K. Yoshida et al., “High Duty Cycle, Tagged and Polarized Photon Beam from 1.3 GeV Electron Synchrotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2688-2691. 
[n]	O. Xiao et al., “Design and test of a S band TW buncher for the injector linac of HEPS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 140-141. doi:10.18429/JACoW-IPAC2024-MOPC35
[n]	Yu. D. Tur, A. N. Dovbnya, V. A. Kushnir, V. V. Mitrochenko, and D. L. Stepin, “Energy Spread Compensation in an Electron Linear Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB16, pp. 988-989. 
[n]	Y. D. Chernousov, “Development of RF Accelerator on Parallel-Coupled Structure - Trend in Accelerator Technique”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 220-222. doi:10.18429/JACoW-RUPAC2016-TUPSA006
[n]	A. Ando, T. Itahashi, I. Miura, and T. Nakatsuka, “Injection and Extraction System of the RCNP Ring Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F6-05, pp. 346-349. 
[n]	D. Melkumyan et al., “Prototyping the Resource Manager and Central Control System for the Cherenkov Telescope Array”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 425. doi:10.18429/JACoW-ICALEPCS2019-MOPHA092
[n]	S. Ackermann et al., “Simultaneous Operation of Two FEL Undulator Beamlines at FLASH”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF22, pp. 103-105. 
[n]	J. M. Loiseaux and M. Fruneau, “Invited Paper: The Grenoble ECR and SARA System”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper C01, pp. 188-194. 
[n]	M. Fruneau et al., “Status Report of SARA”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-11, pp. 62-66. 
[n]	F. E. Mills, R. K. Koul, and F. Lopez, “Optimal Magnet Sorting Procedure and Application to the APS Injector Synchrotron”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2924-2927. 
[n]	C.-Y. Tai et al., “A Magnetostrictive Tuning System for Particle Accelerators”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE068, pp. 3762-3764. 
[n]	T. Schmidt et al., “Experience with Short-Period, Small Gap Undulators at the SwissFEL Aramis Beamline”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 564-568. doi:10.18429/JACoW-FEL2019-WED01
[n]	C. Kittel, M. Calvi, X. Liang, N. J. Sammut, and T. Schmidt, “Operational Model of the Athos Undulator Beamline”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 538-540. doi:10.18429/JACoW-FEL2019-WEP097
[n]	F. Furuta et al., “Vertical Electropolishing Studies at Cornell”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB093, pp. 364-367. 
[n]	T. Misu, M. Kanazawa, K. Katsuki, K. S. Sato, A. Sugiura, and S. Yamada, “Development of Co-Based Amorphous Core for Untuned Broadband RF Cavity”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT016, pp. 1511-1513. 
[n]	A. B. Kavar, A. Pathak, and R. Varma, “Design and Optimization of a 1.3 GHz Gridded Thermionic Electron Gun for High-Intensity Compact Superconducting Electron Accelerator (HICSEA)”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 851-853. doi:10.18429/JACoW-LINAC2022-THPORI09
[n]	M. LABAT, M.-E. Couprie, M. Hosaka, M. Katoh, A. Mochihashi, and Y. Takashima, “Detuning Curve Analysis on the UVSOR2 Free-Electron Laser”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP002, pp. XX-XX. 
[n]	S. Koscielniak and H. J. Tran, “Decoherence of Displaced Beam with Binomial Amplitude Distribution”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP131G, pp. 1126-1128. 
[n]	L. Faillace et al., “Wakefield and HOMs preliminary characterization of the four-quadrant multi-cell RF accelerating structure for the ASTERIX project”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2402-2404. doi:10.18429/JACoW-IPAC2025-WEPS088
[n]	M. Kuriki et al., “Flat Beam Generation with the Phase Space Rotation Technique at KEK-STF”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1897-1900. doi:10.18429/JACoW-IPAC2022-WEPOPT025
[n]	C. S. Hwang, C. H. Chang, T. C. Fan, W. P. Li, and P. H. Lin, “Superconducting Undulator with Variably Polarized Light”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS40, pp. XX-XX. 
[n]	Z. Y. Lin et al., “The Preliminary Performance of the Timing and Synchronization System at Tsinghua University”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4565-4568. doi:10.18429/JACoW-IPAC2017-THPVA055
[n]	E. Acerbi, G. C. Rivoltella, L. Rossi, and G. Raia, “The Beam Diagnostics of the Milan K800 Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-03, pp. 283-286. 
[n]	M. Heuer, S. Pfeiffer, H. Schlarb, and G. Lichtenberg, “Comparison of Feedback Controller for Link Stabilizing Units of the Laser Based Synchronisation System used at the European XFEL”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOCZB3, pp. 34-38. 
[n]	Yu. D. Tur, A. N. Dovbnya, V. V. Mitrochenko, N. G. Reshetnyak, V. P. Romas, and V. V. Zakutin, “Obtaining the Linear Electron Beams by Using the Magnetron Injection Guns with Cold Secondary Emission Metallic Cathodes (Experiment)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3W035, pp. 2820-2822. 
[n]	V. B. Reva, V. V. Parkhomchuk, and X. D. Yang, “Using Electron Cooling for Obtaining Ion Beam with High Intensity and Brightness”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD25, pp. 110-114. 
[n]	P. D. Meruga et al., “Development of an X-band LLRF prototype for the EuPRAXIA@SPARC_LAB LINAC”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 446-448. doi:10.18429/JACoW-LINAC2024-TUPB060
[n]	M. Meena, A. Pathak, and R. Varma, “RF Design, Optimization and Multiphysics Study of a β = 1, 1.3 GHz Single Cell Accelerating Cavity for High-Intensity Compact Superconducting Electron Accelerator (HICSEA)”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 41-43. doi:10.18429/JACoW-LINAC2022-MOPOJO08
[n]	E. R. Harms et al., “Rebuild of Capture Cavity 1 at Fermilab”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP012, pp. 917-919. 
[n]	J. Dietrich, M. I. Bryzgunov, A. D. Goncharov, V. V. Parkhomchuk, V. B. Reva, and D. N. Skorobogatov, “Status of the 2 MeV Electron Cooler Development for COSY-J??lich”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP077, pp. 1469-1471. 
[n]	F. Marti et al., “Invited Paper: Beam Diagnostic Developments at NSCL”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-01, pp. 268-277. 
[n]	G. R. Mitchel, J. E. McGregor, and E. P. Stock, “TASCC Bunch Injection and Phase Control System: Review, Operating Experience and Recent Improvements”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F7-05, pp. 392-396. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search