Favourites
For Word
[n] M. Therasse, O. Brunner, S. Calatroni, J. K. Chambrillon, B. Delaup, and M. Pasini, “HIE-ISOLDE SRF Development Activities at CERN”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC104, pp. 316-318.
[n] E. Trakhtenberg, J. Erdmann, and B. Powers, “Undulator for the LCLS Project - Changes in the Magnet Structure Design”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT081, pp. 4075-4077.
[n] M. Acar, E. Blanco, D. Martin-Gomez, and J. P. Palluel, “Remote Controls for the Active Alignment System of the LHC Low Beta Quadrupoles”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP084, pp. 564-566.
[n] V. Chouhan et al., “Study of the Surface and Performance of Single-Cell Nb Cavities After Vertical EP Using Ninja Cathodes”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 217-219. doi:10.18429/JACoW-LINAC2016-MOPLR037
[n] S. Rubio-Manrique et al., “A Bottom-up Approach to Automatically Configured Tango Control Systems.”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN003, pp. 239-241.
[n] T. Furukawa et al., “Commissioning of NIRS Fast Scanning System for Heavy-ion Therapy”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS072, pp. 3595-3597.
[n] P. Owusu, S. Karkare, J. Knefel, and J. Mama, “Growth and Evaluation of High QE Semiconductor Photocathodes for High-Brightness Electron Sources”, presented at the IPAC'26, Deauville, France, May 2026, paper THP3326, unpublished.
[n] J. A. Avila-Abellan et al., “Em# Electrometer Comes to Light”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 137-142. doi:10.18429/JACoW-ICALEPCS2017-TUAPL04
[n] G. T. Konrad, “Performance of a High Efficiency High Power UHF Klystron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1689-1692.
[n] J. Seeman et al., “Design of a 1036 cm-2 s-1 Super-B Factory”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP039, pp. 2605-2607.
[n] T. J. P. Ellison, “Beam Diagnosis for Unmeasurably Cold Beams (Invited Paper)”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VII-02, pp. 274-281.
[n] E. Hoyer, J. Chin, and W. V. Hassenzahl, “Flux Shunts for Undulators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1584-1587.
[n] A. Vergara-Fernandez et al., “The ITER Interlock System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA02, pp. 910-913.
[n] V. Chouhan et al., “Vertical Electropolishing of 1.3 GHz Niobium Nine-cell SRF Cavity: Bulk Removal and RF Performance”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 491-493. doi:10.18429/JACoW-LINAC2018-TUPO068
[n] M. Schneider, A. Adelmann, N. Pogue, and L. Stingelin, “Suppression of RF Radiation Originating from the Flattop Cavity in the PSI Ring Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 348-350. doi:10.18429/JACoW-Cyclotrons2016-THP18
[n] D. F. C. Fernandez-Carreiras et al., “The Design of the Alba Control System: A Cost-Effective Distributed Hardware and Software Architecture.”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRBHMUST01, pp. 1318-1321.
[n] B. Han, D. J. Newland, T. Hunter, and M. P. Stockli, “Physics Design of a Prototype 2-Solenoid LEBT for the SNS Injector”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP038, pp. 1564-1566.
[n] F. Furuta et al., “Status and Challenges of Vertical Electro-Polishing R&D at Cornell”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1115-1118. doi:10.18429/JACoW-IPAC2017-MOPVA115
[n] X. Serra-Gallifa, J. A. Avila-Abellan, J. J. Jamroz, and O. Matilla, “Em# Project. Improvement of Low Current Measurements at Alba Synchrotron”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC094, pp. 798-800.
[n] M. Ball, T. J. P. Ellison, and C. M. Fox, “New Nondestructive Beam Diagnostics for the IUCF Cyclotron Cooler”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-02, pp. 278-282.
[n] G. T. Konrad, “High Efficiency, CW, High Power Klystrons for Storage Ring Applications”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1249-1253.
[n] P. N. Prakash, D. Kanjilal, K. K. MISTRI, A. Roy, S. S. K. Sonti, and J. Zacharias, “Superconducting Niobium Resonator Fabrication And Testing At IUAC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA132, pp. 500-502.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Therasse, O. Brunner, S. Calatroni, J. K. Chambrillon, B. Delaup, and M. Pasini, “HIE-ISOLDE SRF Development Activities at CERN”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC104, pp. 316-318.
- E. Trakhtenberg, J. Erdmann, and B. Powers, “Undulator for the LCLS Project - Changes in the Magnet Structure Design”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT081, pp. 4075-4077.
- M. Acar, E. Blanco, D. Martin-Gomez, and J. P. Palluel, “Remote Controls for the Active Alignment System of the LHC Low Beta Quadrupoles”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP084, pp. 564-566.
- V. Chouhan et al., “Study of the Surface and Performance of Single-Cell Nb Cavities After Vertical EP Using Ninja Cathodes”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 217-219.
- S. Rubio-Manrique et al., “A Bottom-up Approach to Automatically Configured Tango Control Systems.”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN003, pp. 239-241.
- T. Furukawa et al., “Commissioning of NIRS Fast Scanning System for Heavy-ion Therapy”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS072, pp. 3595-3597.
- P. Owusu, S. Karkare, J. Knefel, and J. Mama, “Growth and Evaluation of High QE Semiconductor Photocathodes for High-Brightness Electron Sources”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP3326, this conference.
- J. A. Avila-Abellan et al., “Em# Electrometer Comes to Light”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 137-142.
- G. T. Konrad, “Performance of a High Efficiency High Power UHF Klystron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1689-1692.
- J. Seeman et al., “Design of a 1036 cm-2 s-1 Super-B Factory”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP039, pp. 2605-2607.
- T. J. P. Ellison, “Beam Diagnosis for Unmeasurably Cold Beams (Invited Paper)”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VII-02, pp. 274-281.
- E. Hoyer, J. Chin, and W. V. Hassenzahl, “Flux Shunts for Undulators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1584-1587.
- A. Vergara-Fernandez et al., “The ITER Interlock System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCA02, pp. 910-913.
- V. Chouhan et al., “Vertical Electropolishing of 1.3 GHz Niobium Nine-cell SRF Cavity: Bulk Removal and RF Performance”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 491-493.
- M. Schneider, A. Adelmann, N. Pogue, and L. Stingelin, “Suppression of RF Radiation Originating from the Flattop Cavity in the PSI Ring Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 348-350.
- D. F. C. Fernandez-Carreiras et al., “The Design of the Alba Control System: A Cost-Effective Distributed Hardware and Software Architecture.”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRBHMUST01, pp. 1318-1321.
- B. Han, D. J. Newland, T. Hunter, and M. P. Stockli, “Physics Design of a Prototype 2-Solenoid LEBT for the SNS Injector”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP038, pp. 1564-1566.
- F. Furuta et al., “Status and Challenges of Vertical Electro-Polishing R&D at Cornell”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1115-1118.
- X. Serra-Gallifa, J. A. Avila-Abellan, J. J. Jamroz, and O. Matilla, “Em# Project. Improvement of Low Current Measurements at Alba Synchrotron”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC094, pp. 798-800.
- M. Ball, T. J. P. Ellison, and C. M. Fox, “New Nondestructive Beam Diagnostics for the IUCF Cyclotron Cooler”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F5-02, pp. 278-282.
- G. T. Konrad, “High Efficiency, CW, High Power Klystrons for Storage Ring Applications”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1249-1253.
- P. N. Prakash, D. Kanjilal, K. K. MISTRI, A. Roy, S. S. K. Sonti, and J. Zacharias, “Superconducting Niobium Resonator Fabrication And Testing At IUAC”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA132, pp. 500-502.
Back to search