Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Sattonnay et al., “Is it Possible to Use Additive Manufacturing for Accelerator UHV Beam Pipes?”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2240-2243. doi:10.18429/JACoW-IPAC2019-WEXXPLS3
[n] D. H. Bilderback, “Energy Recovery Linac Experimental Challenges”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper PLT03, pp. XX-XX.
[n] S. Morales Vigo et al., “Calibration of the LHC Diamond beam loss monitors for LHC Run 3”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4641-4644. doi:10.18429/JACoW-IPAC2023-THPL085
[n] L. Reginato, C. Peters, D. Vanecek, S. Yu, and F. Deadrick, “Engineering Conceptual Design of the Relativistic Klystron Two-Beam Accelerator Based Power Source for 1-TeV Next Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC18, pp. 743-745.
[n] O. Heid and T. J. S. Hughes, “Compact Solid State Direct Drive RF LINAC Experimental Program”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD42, pp. 159-161.
[n] K. C. Seino, “Main Injector LCW Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP059, pp. XX-XX.
[n] E. Van der Bij, M. Cattin, E. Gousiou, J. Serrano, and T. Wlostowski, “CERN's FMC Kit”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOCB01, pp. 1020-1023.
[n] H. Geng et al., “Status of CEPC Lattice Design”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THT4B4, pp. 45-48.
[n] D. Tong, L. Xiao, and Y. Ni, “Non-Intrusive Diagnosis of Individual Cell Frequencies in a Cavity Chain”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E206, pp. 626-630.
[n] M. B?Âge, J. Chrin, M. Mu??oz, and A. Streun, “Development of Beam Dynamics Applications within a CORBA Framework at the SLS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP7B10, pp. 1354-1356.
[n] P. Sch?â et al., “Towards Near-Field Electro-Optical Bunch Profile Monitoring in a Multi-Bunch Environment”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 227-230. doi:10.18429/JACoW-IPAC2017-MOPAB055
[n] J. Tratnik et al., “Femtosecond Electro-optical Synchronization System over Distance up to 300 m”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper FROA03, pp. 772-775.
[n] G. Moreno et al., “Study of manufacturing errors in 750 MHz RFQ using electromagnetic simulations”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 71-74. doi:10.18429/JACoW-LINAC2024-MOPB017
[n] S. Bulka, Z. Dzwigalski, K. Roman, and Z. Zimek, “Short Pulse Electron Accelerator for Pulse Radiolysis Study”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2A19, pp. 2379-2384.
[n] I. Terechkine et al., “Tuner of a Second Harmonic Cavity of the Fermilab Booster”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4362-4365. doi:10.18429/JACoW-IPAC2017-THPIK113
[n] M. Fukuda et al., “Development of High-quality Intense Proton Beam at the RCNP Cyclotron Facility”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS080, pp. 2694-2696.
[n] D.-K. Liu, I. Abe, A. Enomoto, K. Nakahara, J. Tanaka, and T. Urano, “Image Processing System for Electron Linac Beam Diagnosis”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-20, pp. 484-486.
[n] H. Fadil et al., “COLLECTION AND COOLING SCHEME OF LASER PRODUCED ION BEAM”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper FRAM03, pp. XX-XX.
[n] P. E. Evtushenko, T. E. Cowan, U. Lehnert, and P. Michel, “Design of High Power CW IR-THz Source for the Radiation Source ELBE Upgrade”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1702-1704. doi:10.18429/JACoW-IPAC2019-TUPRB012
[n] J. H. B. Madsen et al., “First Experience with the LEP Pre-Injector (LPI) by the LPI Beam Commissioning Team”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 298-301.
[n] V. Galdi, S. Petracca, and I. M. Pinto, “Hybrid Computation of Normal Mode Tune Shifts in Rounded-Rectangular Pipes”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA128, pp. 2882-2884.
[n] U. Iriso et al., “Analysis of Electron Cloud at RHIC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT177, pp. 2239-2241.
[n] M. Fruneau et al., “Status Report of SARA”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-11, pp. 62-66.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Sattonnay et al., “Is it Possible to Use Additive Manufacturing for Accelerator UHV Beam Pipes?”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2240-2243.
- D. H. Bilderback, “Energy Recovery Linac Experimental Challenges”, in Proc. 37th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'06), Hamburg, Germany, May 2006, paper PLT03, pp. XX-XX.
- S. Morales Vigo et al., “Calibration of the LHC Diamond beam loss monitors for LHC Run 3”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL085, pp. 4641-4644.
- L. Reginato, C. Peters, D. Vanecek, S. Yu, and F. Deadrick, “Engineering Conceptual Design of the Relativistic Klystron Two-Beam Accelerator Based Power Source for 1-TeV Next Linear Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC18, pp. 743-745.
- O. Heid and T. J. S. Hughes, “Compact Solid State Direct Drive RF LINAC Experimental Program”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD42, pp. 159-161.
- K. C. Seino, “Main Injector LCW Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP059, pp. XX-XX.
- E. Van der Bij, M. Cattin, E. Gousiou, J. Serrano, and T. Wlostowski, “CERN's FMC Kit”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper WECOCB01, pp. 1020-1023.
- H. Geng et al., “Status of CEPC Lattice Design”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper THT4B4, pp. 45-48.
- D. Tong, L. Xiao, and Y. Ni, “Non-Intrusive Diagnosis of Individual Cell Frequencies in a Cavity Chain”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5E206, pp. 626-630.
- M. B?Âge, J. Chrin, M. Mu??oz, and A. Streun, “Development of Beam Dynamics Applications within a CORBA Framework at the SLS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP7B10, pp. 1354-1356.
- P. Sch?â et al., “Towards Near-Field Electro-Optical Bunch Profile Monitoring in a Multi-Bunch Environment”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 227-230.
- J. Tratnik et al., “Femtosecond Electro-optical Synchronization System over Distance up to 300 m”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper FROA03, pp. 772-775.
- G. Moreno et al., “Study of manufacturing errors in 750 MHz RFQ using electromagnetic simulations”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 71-74.
- S. Bulka, Z. Dzwigalski, K. Roman, and Z. Zimek, “Short Pulse Electron Accelerator for Pulse Radiolysis Study”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP2A19, pp. 2379-2384.
- I. Terechkine et al., “Tuner of a Second Harmonic Cavity of the Fermilab Booster”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4362-4365.
- M. Fukuda et al., “Development of High-quality Intense Proton Beam at the RCNP Cyclotron Facility”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS080, pp. 2694-2696.
- D.-K. Liu, I. Abe, A. Enomoto, K. Nakahara, J. Tanaka, and T. Urano, “Image Processing System for Electron Linac Beam Diagnosis”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-20, pp. 484-486.
- H. Fadil et al., “COLLECTION AND COOLING SCHEME OF LASER PRODUCED ION BEAM”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper FRAM03, pp. XX-XX.
- P. E. Evtushenko, T. E. Cowan, U. Lehnert, and P. Michel, “Design of High Power CW IR-THz Source for the Radiation Source ELBE Upgrade”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1702-1704.
- J. H. B. Madsen et al., “First Experience with the LEP Pre-Injector (LPI) by the LPI Beam Commissioning Team”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 298-301.
- V. Galdi, S. Petracca, and I. M. Pinto, “Hybrid Computation of Normal Mode Tune Shifts in Rounded-Rectangular Pipes”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA128, pp. 2882-2884.
- U. Iriso et al., “Analysis of Electron Cloud at RHIC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT177, pp. 2239-2241.
- M. Fruneau et al., “Status Report of SARA”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-11, pp. 62-66.
Back to search