Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Iwashita, Y. Fuwa, Y. Kuriyama, and H. Tongu, “Faint magnetic field shield using the Meissner effect”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1818-1821. doi:10.18429/JACoW-IPAC2025-WEPB037
[n] E. S. Fischer, A. Bleile, J. P. Meier, A. Mierau, P. Schnizer, and P. G. Akishin, “The SIS100 Superconducting Fast Ramped Dipole Magnet”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2681-2683. doi:10.18429/JACoW-IPAC2014-WEPRI083
[n] M. Lindroos, H. Danared, R. Garoby, D. P. McGinnis, and E. Tanke, “Status of the ESS Accelerator Construction Project”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3870-3872. doi:10.18429/JACoW-IPAC2015-THPF080
[n] V. Ayvazyan, S. Choroba, Z. Geng, G. Petrosyan, S. Simrock, and V. Vogel, “Optimization of Filling Procedure for TESLA-type Cavities for Klystron RF Power Minimization of European XFEL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA039, pp. 1416-1418.
[n] F. Schmidt-Foehre, D. Noelle, R. Susen, and K. Wittenburg, “Tests and Measurements with the Embedded Radiation-monitor-system Prototype for Dosimetry at the European XFEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR033, pp. 4041-4043.
[n] H. Delsim-Hashemi et al., “Undulators of the sFLASH Experiment”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD014, pp. 3114-3116.
[n] S. Andrianov and A. Abramova, “ANALYTICAL AND NUMERICAL METHODS IN BEAM PHYSICS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBP28, pp. XX-XX.
[n] V. Volkov et al., “The Source of Emittance Dilution and photoemission tunneling effect in Photocathode RF Guns”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD062, pp. 1542-1544.
[n] U. Dorda, R. W. Assmann, K. Floettmann, B. Marchetti, Y. C. Nie, and J. Zhu, “Simulation Results of the Beam Transport of Ultra-Short Electron Bunches in Existing Beam Transfer Lines to Sinbad”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1466-1468. doi:10.18429/JACoW-IPAC2015-TUPWA028
[n] J. Jacob and O. Naumann, “Landau Damping of Longitudinal Instabilities for the Operation of the ESRF Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP04G, pp. 987-989.
[n] B. T. McCuistian et al., “Temporal Spot Size Evolution of the DARHT First Axis Radiographic Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC066, pp. 1206-1208.
[n] V. V. Paramonov, “The CDS Parameters for Proton Linac with Moderate Heat Loading”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA013, pp. 65-67.
[n] K. Hatanaka et al., “Development of HTS Magnets”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUOAC02, pp. 1095-1097.
[n] Z. Liu et al., “NSRL Phase 2 Project”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6A002, pp. 636-640.
[n] M. Titberidze and K. Chouffani, “Laser Compton Scattering X-rays as a Tool for K-edge Densitometry”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR068, pp. 4133-4135.
[n] E. S. Fischer et al., “Fast Ramped Superferric Prototype Magnets of the FAIR Project ÔÇô First Test Results and Design Update”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP065, pp. 277-279.
[n] E. Trachanas et al., “Installation and integrated testing of magnets for the ESS linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3635-3638. doi:10.18429/JACoW-IPAC2023-WEPM035
[n] P. Costa Pinto et al., “Implementation of Carbon Thin Film Coatings in the Super Proton Synchrotron (SPS) for Electron Cloud Mitigation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2574-2576. doi:10.18429/JACoW-IPAC2014-WEPRI043
[n] D. J. Liska, J. Potter, and J. Uher, “Cryogenic Studies of RF Accelerating Structures, Vintage 1978”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-26, pp. 104-105.
[n] H. Sakai et al., “Development of Input Coupler for Compact ERL Main Linac”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper WG3006, pp. 91-96.
[n] D. P. McGinnis, “New Design Approaches for High Intensity Superconducting Linacs ÔÇô The New ESS Linac Design”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 23-27. doi:10.18429/JACoW-IPAC2014-MOYBA02
[n] A. Orzhekhovskaya, G. Clemente, L. Groening, S. Mickat, and B. Schlitt, “Optimization of an IH-cavity based High Energy Heavy-ion Linac at GSI”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3214-3216. doi:10.18429/JACoW-IPAC2014-THPME005
[n] F. Lemery, D. Mihalcea, P. Piot, and J. Zhu, “Planned High-gradient Flat-beam-driven Dielectric Wakefield Experiments at the Fermilab's Advanced Superconducting Test Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1451-1453. doi:10.18429/JACoW-IPAC2014-TUPME042
[n] H. Weise, “How To Produce 100 Superconducting Modules for the European XFEL in Collaboration and with Industry”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1923-1928. doi:10.18429/JACoW-IPAC2014-WEIB03
[n] L. W. Zhang, J. Li, W. D. Wang, and Y. Li, “Performance Optimization of the Stacked-Blumlein”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD072, pp. 3680-3682.
[n] B. Sinha and R. K. Bhandari, “Status of the Superconducting Cyclotron Project at VECC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper WEM201, pp. XX-XX.
[n] Y. K. Zhao, W. Li, B. G. Sun, Y. G. Tang, F. F. Wu, and T. Y. Zhou, “Design of the Multiplexing Optical Measurement System for a Pre-bunched THz Free Electron Laser”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2931-2933. doi:10.18429/JACoW-IPAC2019-WEPRB054
[n] W. Merz and H. Pfeffer, “The Fermilab Dzero Overpass Power Supply System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3763-3766.
[n] Y. Nosochkov, P. Emma, T. O. Raubenheimer, and M. Woodley, “Design of the LCLS-II Electron Optics”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2940-2942. doi:10.18429/JACoW-IPAC2014-THPRO034
[n] F. Schlander et al., “The Superconducting Accelerator for the ESS Project”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 24-28. doi:10.18429/JACoW-SRF2017-MOYA01
[n] M. Schmei?ƒer et al., “Results from Beam Commissioning of an SRF Plug-gun Cavity Photoinjector”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI002, pp. 282-284.
[n] M. V. Fazio, B. E. Carlsten, L. M. Earley, and J. Potter, “High-Power, Millimeter-Wave Source Development at Los Alamos National Laboratory”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO466, pp. 193-195.
[n] R. G. Heine, K. Aulenbacher, and R. Eichhorn, “MESA - Sketch of an Energy Recovery Linac for Nuclear Physics Experiments at Mainz”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR073, pp. 1993-1995.
[n] M. Eshraqi, H. Danared, and D. P. McGinnis, “Design Options of the ESS Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO072, pp. 3921-3923.
[n] C. Hauviller, “Fully Hydroformed RF Cavities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 485-488.
[n] N. Elias, C. Darve, J. Fydrych, A. Nordt, and D. P. Piso, “Preliminary Functional Analysis and Operating Modes of ESS 704 MHz Superconducting Radio-Frequency Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3317-3319. doi:10.18429/JACoW-IPAC2014-THPME042
[n] F. Marcellini et al., “Design of Cavity BPM Pickups for SwissFEL”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA24, pp. 390-393.
[n] C. H. A. Hogben, M. Beldishevski, S. Griph, P. J. L. Heesterman, K. Kneupner, and R. M. A. Lucock, “The HTTP 'Black Box' Protocol for Control and Data Acquisition at JET”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP021, pp. 131-133.
[n] V. Grattoni et al., “FLASH Upgrade for Seeding”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 226-229. doi:10.18429/JACoW-FEL2019-TUP074
[n] E. Donoghue et al., “Studies of Electron Activities in SNS-Type Superconducting RF Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP67, pp. 402-405.
[n] K. Enami et al., “Performance Evaluation of ERL Main Linac Tuner”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2534-2536. doi:10.18429/JACoW-IPAC2014-WEPRI027
[n] R. Visintini, G. Cautero, M. Cautero, D. M. Molaro, M. Svandrlik, and M. Zaccaria, “Magnet Power Converters for the New Elettra Full Energy Injector”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP133, pp. 3673-3675.
[n] S. Chel, X. Hanus, J. Jacob, A. Mosnier, O. Naumann, and F. Orsini, “HOM damping in SOLEIL Superconducting Cavity”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP05C, pp. 1864-1866.
[n] B. Bojovic, M. Josipovic, and A. Susini, “The RF Coupling System of the VINCY Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XA-02, pp. 511-514.
[n] I. Bogdanov et al., “Experimental Study of Characteristics of Cable for Fast-Cycling Superconducting Magnets”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC009, pp. 343-345.
[n] D. V. Altiparmakov, M. V. Markovic, S. S. Tomic, and N. A. Morozov, “Computer Modeling of the Isochronous Field in the VINCY Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-11, pp. 210-213.
[n] M. J. Nasse et al., “Status of the Accelerator Physics Test Facility FLUTE”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1506-1508. doi:10.18429/JACoW-IPAC2015-TUPWA042
[n] M. Stadler et al., “Beam Test Results of Undulator Cavity BPM Electronics for the European XFEL”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA27, pp. 404-408.
[n] A. Reiter et al., “Beam Instrumentation for CRYRING@ESR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2084-2087. doi:10.18429/JACoW-IPAC2018-WEPAK004
[n] C. Lechner et al., “Status of the sFLASH Experiment”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1471-1473. doi:10.18429/JACoW-IPAC2018-TUPMF085
[n] T. Kamps et al., “First Demonstration of Electron Beam Generation and Characterization with an All Superconducting Radio-frequency (SRF) Photoinjector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC109, pp. 3143-3145.
[n] D. P. McGinnis, M. Lindroos, and R. Miyamoto, “European Spallation Source Afterburner Concept”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO073, pp. 3924-3926.
[n] M. Schwickert et al., “Status of Beam Diagnostics for SIS100”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 156-159. doi:10.18429/JACoW-IPAC2017-MOPAB035
[n] T. Scholz, “A Coaxial Beam Position Monitor for the TESLA-FEL and Some Error Estimations”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP10A, pp. 1598-1600.
[n] D. Lens, P. H??lsmann, and H. Klingbeil, “Beam Loading Effects on the RF Control Loops of a Double-Harmonic Cavity System for FAIR”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP100, pp. 2249-2251.
[n] D. B?Âhne et al., “Gantry Studies for the Proposed Heavy Ion Cancer Therapy Facility in Heidelberg”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3A15, pp. 2551-2553.
[n] D. V. Altiparmakov and S. B. Vorozhtsov, “Computer Models of the VINCY Cyclotron Magnet”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-12, pp. 214-217.
[n] M. Sassowsky et al., “Steel Septum Magnets for the LHC Beam Injection and Extraction”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE083, pp. 2514-2516.
[n] M. Lindroos et al., “Upgrade Strategies for High Power Proton Linacs”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS064, pp. 2646-2648.
[n] R. T?Âlle et al., “Injection Kicker for HESR at FAIR using Semi-Conductor Switches”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3770-3772. doi:10.18429/JACoW-IPAC2015-THPF034
[n] Y. G. Tang, L. Wang, and C.-F. Wu, “Preliminary Research of HOM for 100MHz Superconducting Cavity in the Pre-Research Project of HALS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 649-651. doi:10.18429/JACoW-IPAC2019-MOPRB033
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Iwashita, Y. Fuwa, Y. Kuriyama, and H. Tongu, “Faint magnetic field shield using the Meissner effect”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB037, pp. 1818-1821.
- E. S. Fischer, A. Bleile, J. P. Meier, A. Mierau, P. Schnizer, and P. G. Akishin, “The SIS100 Superconducting Fast Ramped Dipole Magnet”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2681-2683.
- M. Lindroos, H. Danared, R. Garoby, D. P. McGinnis, and E. Tanke, “Status of the ESS Accelerator Construction Project”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3870-3872.
- V. Ayvazyan, S. Choroba, Z. Geng, G. Petrosyan, S. Simrock, and V. Vogel, “Optimization of Filling Procedure for TESLA-type Cavities for Klystron RF Power Minimization of European XFEL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA039, pp. 1416-1418.
- F. Schmidt-Foehre, D. Noelle, R. Susen, and K. Wittenburg, “Tests and Measurements with the Embedded Radiation-monitor-system Prototype for Dosimetry at the European XFEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR033, pp. 4041-4043.
- H. Delsim-Hashemi et al., “Undulators of the sFLASH Experiment”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD014, pp. 3114-3116.
- S. Andrianov and A. Abramova, “ANALYTICAL AND NUMERICAL METHODS IN BEAM PHYSICS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THBP28, pp. XX-XX.
- V. Volkov et al., “The Source of Emittance Dilution and photoemission tunneling effect in Photocathode RF Guns”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD062, pp. 1542-1544.
- U. Dorda, R. W. Assmann, K. Floettmann, B. Marchetti, Y. C. Nie, and J. Zhu, “Simulation Results of the Beam Transport of Ultra-Short Electron Bunches in Existing Beam Transfer Lines to Sinbad”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1466-1468.
- J. Jacob and O. Naumann, “Landau Damping of Longitudinal Instabilities for the Operation of the ESRF Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP04G, pp. 987-989.
- B. T. McCuistian et al., “Temporal Spot Size Evolution of the DARHT First Axis Radiographic Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC066, pp. 1206-1208.
- V. V. Paramonov, “The CDS Parameters for Proton Linac with Moderate Heat Loading”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUPSA013, pp. 65-67.
- K. Hatanaka et al., “Development of HTS Magnets”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUOAC02, pp. 1095-1097.
- Z. Liu et al., “NSRL Phase 2 Project”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6A002, pp. 636-640.
- M. Titberidze and K. Chouffani, “Laser Compton Scattering X-rays as a Tool for K-edge Densitometry”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR068, pp. 4133-4135.
- E. S. Fischer et al., “Fast Ramped Superferric Prototype Magnets of the FAIR Project ÔÇô First Test Results and Design Update”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP065, pp. 277-279.
- E. Trachanas et al., “Installation and integrated testing of magnets for the ESS linac”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM035, pp. 3635-3638.
- P. Costa Pinto et al., “Implementation of Carbon Thin Film Coatings in the Super Proton Synchrotron (SPS) for Electron Cloud Mitigation”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2574-2576.
- D. J. Liska, J. Potter, and J. Uher, “Cryogenic Studies of RF Accelerating Structures, Vintage 1978”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-26, pp. 104-105.
- H. Sakai et al., “Development of Input Coupler for Compact ERL Main Linac”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper WG3006, pp. 91-96.
- D. P. McGinnis, “New Design Approaches for High Intensity Superconducting Linacs ÔÇô The New ESS Linac Design”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 23-27.
- A. Orzhekhovskaya, G. Clemente, L. Groening, S. Mickat, and B. Schlitt, “Optimization of an IH-cavity based High Energy Heavy-ion Linac at GSI”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3214-3216.
- F. Lemery, D. Mihalcea, P. Piot, and J. Zhu, “Planned High-gradient Flat-beam-driven Dielectric Wakefield Experiments at the Fermilab's Advanced Superconducting Test Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1451-1453.
- H. Weise, “How To Produce 100 Superconducting Modules for the European XFEL in Collaboration and with Industry”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1923-1928.
- L. W. Zhang, J. Li, W. D. Wang, and Y. Li, “Performance Optimization of the Stacked-Blumlein”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD072, pp. 3680-3682.
- B. Sinha and R. K. Bhandari, “Status of the Superconducting Cyclotron Project at VECC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper WEM201, pp. XX-XX.
- Y. K. Zhao, W. Li, B. G. Sun, Y. G. Tang, F. F. Wu, and T. Y. Zhou, “Design of the Multiplexing Optical Measurement System for a Pre-bunched THz Free Electron Laser”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2931-2933.
- W. Merz and H. Pfeffer, “The Fermilab Dzero Overpass Power Supply System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3763-3766.
- Y. Nosochkov, P. Emma, T. O. Raubenheimer, and M. Woodley, “Design of the LCLS-II Electron Optics”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2940-2942.
- F. Schlander et al., “The Superconducting Accelerator for the ESS Project”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 24-28.
- M. Schmei?ƒer et al., “Results from Beam Commissioning of an SRF Plug-gun Cavity Photoinjector”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI002, pp. 282-284.
- M. V. Fazio, B. E. Carlsten, L. M. Earley, and J. Potter, “High-Power, Millimeter-Wave Source Development at Los Alamos National Laboratory”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO466, pp. 193-195.
- R. G. Heine, K. Aulenbacher, and R. Eichhorn, “MESA - Sketch of an Energy Recovery Linac for Nuclear Physics Experiments at Mainz”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR073, pp. 1993-1995.
- M. Eshraqi, H. Danared, and D. P. McGinnis, “Design Options of the ESS Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO072, pp. 3921-3923.
- C. Hauviller, “Fully Hydroformed RF Cavities”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 485-488.
- N. Elias, C. Darve, J. Fydrych, A. Nordt, and D. P. Piso, “Preliminary Functional Analysis and Operating Modes of ESS 704 MHz Superconducting Radio-Frequency Linac”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3317-3319.
- F. Marcellini et al., “Design of Cavity BPM Pickups for SwissFEL”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA24, pp. 390-393.
- C. H. A. Hogben, M. Beldishevski, S. Griph, P. J. L. Heesterman, K. Kneupner, and R. M. A. Lucock, “The HTTP 'Black Box' Protocol for Control and Data Acquisition at JET”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP021, pp. 131-133.
- V. Grattoni et al., “FLASH Upgrade for Seeding”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 226-229.
- E. Donoghue et al., “Studies of Electron Activities in SNS-Type Superconducting RF Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP67, pp. 402-405.
- K. Enami et al., “Performance Evaluation of ERL Main Linac Tuner”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2534-2536.
- R. Visintini, G. Cautero, M. Cautero, D. M. Molaro, M. Svandrlik, and M. Zaccaria, “Magnet Power Converters for the New Elettra Full Energy Injector”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP133, pp. 3673-3675.
- S. Chel, X. Hanus, J. Jacob, A. Mosnier, O. Naumann, and F. Orsini, “HOM damping in SOLEIL Superconducting Cavity”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP05C, pp. 1864-1866.
- B. Bojovic, M. Josipovic, and A. Susini, “The RF Coupling System of the VINCY Cyclotron”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XA-02, pp. 511-514.
- I. Bogdanov et al., “Experimental Study of Characteristics of Cable for Fast-Cycling Superconducting Magnets”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC009, pp. 343-345.
- D. V. Altiparmakov, M. V. Markovic, S. S. Tomic, and N. A. Morozov, “Computer Modeling of the Isochronous Field in the VINCY Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-11, pp. 210-213.
- M. J. Nasse et al., “Status of the Accelerator Physics Test Facility FLUTE”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1506-1508.
- M. Stadler et al., “Beam Test Results of Undulator Cavity BPM Electronics for the European XFEL”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA27, pp. 404-408.
- A. Reiter et al., “Beam Instrumentation for CRYRING@ESR”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2084-2087.
- C. Lechner et al., “Status of the sFLASH Experiment”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1471-1473.
- T. Kamps et al., “First Demonstration of Electron Beam Generation and Characterization with an All Superconducting Radio-frequency (SRF) Photoinjector”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC109, pp. 3143-3145.
- D. P. McGinnis, M. Lindroos, and R. Miyamoto, “European Spallation Source Afterburner Concept”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO073, pp. 3924-3926.
- M. Schwickert et al., “Status of Beam Diagnostics for SIS100”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 156-159.
- T. Scholz, “A Coaxial Beam Position Monitor for the TESLA-FEL and Some Error Estimations”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP10A, pp. 1598-1600.
- D. Lens, P. H??lsmann, and H. Klingbeil, “Beam Loading Effects on the RF Control Loops of a Double-Harmonic Cavity System for FAIR”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP100, pp. 2249-2251.
- D. B?Âhne et al., “Gantry Studies for the Proposed Heavy Ion Cancer Therapy Facility in Heidelberg”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3A15, pp. 2551-2553.
- D. V. Altiparmakov and S. B. Vorozhtsov, “Computer Models of the VINCY Cyclotron Magnet”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-12, pp. 214-217.
- M. Sassowsky et al., “Steel Septum Magnets for the LHC Beam Injection and Extraction”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE083, pp. 2514-2516.
- M. Lindroos et al., “Upgrade Strategies for High Power Proton Linacs”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS064, pp. 2646-2648.
- R. T?Âlle et al., “Injection Kicker for HESR at FAIR using Semi-Conductor Switches”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3770-3772.
- Y. G. Tang, L. Wang, and C.-F. Wu, “Preliminary Research of HOM for 100MHz Superconducting Cavity in the Pre-Research Project of HALS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 649-651.
Back to search