Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Leng and L. Hoff, “Analog I/O Module Test System Based on EPICS CA Protocol and ActiveX CA Interface”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP529, pp. XX-XX.
[n] B. Petersen, “Industrialization of Superconducting Accelerator Module Production”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEIM03, pp. 1964-1966.
[n] A. Kerek et al., “Fast Inorganic Scintillators for Beam Diagnostics at Extreme High Vacuum”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP09E, pp. 1577-1579.
[n] P. Docker, “The Use of Vibration to Achieve Precision”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper TUPB03, pp. XX-XX.
[n] M. Plum, “Electric Fields, Electron Production, and Electron Motion at the Stripper Foil in the Los Alamos Proton Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR22, pp. 3403-3405.
[n] K. Eppley, J. Feinstein, K. Ko, N. Kroll, T. Lee, and E. Nelson, “A High Power Cross-Field Amplifier at X-Band”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 719-722.
[n] S. Ninomiya, T. Adachi, S. Fukumoto, S. H. Hatori, and T. Kurita, “Dual-mode Beam Current Monitor”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH059, pp. 1145-1147.
[n] L. J. Lagin et al., “Status of the National Ignition Facility (NIF) Integrated Computer Control and Information Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOAAB01, pp. 483-486.
[n] A. Bainbridge et al., “Design of an electron energy spectrometer and energy selector for laser-plasma driven beams at EPAC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4568-4571. doi:10.18429/JACoW-IPAC2023-THPL063
[n] F. Hug et al., “Increasing the Stability of the Electron Beam of the S-DALINAC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI007, pp. 3303-3305.
[n] R. Stegmann et al., “Installation and Test of a Beam Loss Monitor System for the S-DALINAC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR014, pp. 804-806.
[n] M. Simon et al., “COSY Slow Orbit Feedback System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1802-1805. doi:10.18429/JACoW-IPAC2017-TUPIK050
[n] H. S. Wang, T. C. Tseng, D.-J. Wang, and P. S. Yaw, “Design and Test of a Sample Stage with a Low Run-Out Rotation for TXM at NSRRC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP045, pp. 1384-1386.
[n] C. A. Frost et al., “Ion Focused Transport Experiments”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-39, pp. 537-539.
[n] S. Lederer et al., “Conditioning of a New Gun Cavity Towards 60 MV/m at PITZ”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN026, pp. 971-973.
[n] W. Br?ñutigam and R. Brings, “Beam Stabilization by Feedback Control of the Accelerating Parameters in a Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-30, pp. 280-283.
[n] T. Furukawa et al., “Beam Monitors of NIRS Fast Scanning System for Particle Therapy”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB51, pp. 182-185.
[n] O. Marcouill?® et al., “W164: A Wiggler Dedicated to the PUMA Beamline and the FEMTOSLICING Project at SOLEIL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1998-2000. doi:10.18429/JACoW-IPAC2014-WEPRO027
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Leng and L. Hoff, “Analog I/O Module Test System Based on EPICS CA Protocol and ActiveX CA Interface”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP529, pp. XX-XX.
- B. Petersen, “Industrialization of Superconducting Accelerator Module Production”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEIM03, pp. 1964-1966.
- A. Kerek et al., “Fast Inorganic Scintillators for Beam Diagnostics at Extreme High Vacuum”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP09E, pp. 1577-1579.
- P. Docker, “The Use of Vibration to Achieve Precision”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper TUPB03, pp. XX-XX.
- M. Plum, “Electric Fields, Electron Production, and Electron Motion at the Stripper Foil in the Los Alamos Proton Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAR22, pp. 3403-3405.
- K. Eppley, J. Feinstein, K. Ko, N. Kroll, T. Lee, and E. Nelson, “A High Power Cross-Field Amplifier at X-Band”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 719-722.
- S. Ninomiya, T. Adachi, S. Fukumoto, S. H. Hatori, and T. Kurita, “Dual-mode Beam Current Monitor”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH059, pp. 1145-1147.
- L. J. Lagin et al., “Status of the National Ignition Facility (NIF) Integrated Computer Control and Information Systems”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOAAB01, pp. 483-486.
- A. Bainbridge et al., “Design of an electron energy spectrometer and energy selector for laser-plasma driven beams at EPAC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL063, pp. 4568-4571.
- F. Hug et al., “Increasing the Stability of the Electron Beam of the S-DALINAC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI007, pp. 3303-3305.
- R. Stegmann et al., “Installation and Test of a Beam Loss Monitor System for the S-DALINAC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR014, pp. 804-806.
- M. Simon et al., “COSY Slow Orbit Feedback System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1802-1805.
- H. S. Wang, T. C. Tseng, D.-J. Wang, and P. S. Yaw, “Design and Test of a Sample Stage with a Low Run-Out Rotation for TXM at NSRRC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP045, pp. 1384-1386.
- C. A. Frost et al., “Ion Focused Transport Experiments”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-39, pp. 537-539.
- S. Lederer et al., “Conditioning of a New Gun Cavity Towards 60 MV/m at PITZ”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN026, pp. 971-973.
- W. Br?ñutigam and R. Brings, “Beam Stabilization by Feedback Control of the Accelerating Parameters in a Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-30, pp. 280-283.
- T. Furukawa et al., “Beam Monitors of NIRS Fast Scanning System for Particle Therapy”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPB51, pp. 182-185.
- O. Marcouill?® et al., “W164: A Wiggler Dedicated to the PUMA Beamline and the FEMTOSLICING Project at SOLEIL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1998-2000.
Back to search