Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Bennetto, “Characterising Injected Beam Dynamics in the Australian Synchrotron Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2458-2459. doi:10.18429/JACoW-IPAC2019-WEPGW001
[n] P. A. McIntosh et al., “Realisation of a prototype superconducting CW cavity and cryomodule for energy recovery”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP33, pp. XX-XX.
[n] R. Gobin et al., “High Intensity Beam Production at CEA/Saclay For The IPHI Project”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 83-85. doi:10.18429/JACoW-ECRIS2016-WEPP01
[n] O. N. Malyshev et al., “One Ring Mode of the Storage Ring Complex K4-K10”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 524-527.
[n] M. Chanel, R. Maccaferri, and J. C. Perrier, “”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1574-1577.
[n] K. Chen, M. Hosaka, and W. Xu, “Preliminary design for the JHLS storage ring”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPC36, unpublished.
[n] W. J. Goscinski et al., “MASSIVE: an HPC Collaboration to Underpin Synchrotron Science”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 640-644. doi:10.18429/JACoW-ICALEPCS2015-WED3O01
[n] Y. Tamashevich, A. Neumann, J. Knobloch, and O. Kugeler, “Commissioning of SupraLab: SRF cavity processing and testing facility at HZB”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA163, unpublished.
[n] E. M. Conard, D. W. Arnott, and S. K. Parcell, “Design, Construction and Commissioning of a Simple, Low Cost Permanent Magnet Quadrupole Doublet”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-13, pp. 200-202.
[n] P. Krejcik et al., “Engineering Design of the New LCLS X-band Transverse Deflecting Cavity”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC41, pp. 167-169.
[n] P. J. Tallerico, M. L. Crow, A. Guthrie, G. Johnson, and J. Schubert, “The Conventional Facilities Requirements for the SNS Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH066, pp. 3377-3379.
[n] D. Wang et al., “Vacuum System Design of the MIT-Bates South Hall Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3851-3854.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Bennetto, “Characterising Injected Beam Dynamics in the Australian Synchrotron Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2458-2459.
- P. A. McIntosh et al., “Realisation of a prototype superconducting CW cavity and cryomodule for energy recovery”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP33, pp. XX-XX.
- R. Gobin et al., “High Intensity Beam Production at CEA/Saclay For The IPHI Project”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 83-85.
- O. N. Malyshev et al., “One Ring Mode of the Storage Ring Complex K4-K10”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 524-527.
- M. Chanel, R. Maccaferri, and J. C. Perrier, “”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1574-1577.
- K. Chen, M. Hosaka, and W. Xu, “Preliminary design for the JHLS storage ring”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC36, unpublished.
- W. J. Goscinski et al., “MASSIVE: an HPC Collaboration to Underpin Synchrotron Science”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 640-644.
- Y. Tamashevich, A. Neumann, J. Knobloch, and O. Kugeler, “Commissioning of SupraLab: SRF cavity processing and testing facility at HZB”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA163, unpublished.
- E. M. Conard, D. W. Arnott, and S. K. Parcell, “Design, Construction and Commissioning of a Simple, Low Cost Permanent Magnet Quadrupole Doublet”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-13, pp. 200-202.
- P. Krejcik et al., “Engineering Design of the New LCLS X-band Transverse Deflecting Cavity”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC41, pp. 167-169.
- P. J. Tallerico, M. L. Crow, A. Guthrie, G. Johnson, and J. Schubert, “The Conventional Facilities Requirements for the SNS Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH066, pp. 3377-3379.
- D. Wang et al., “Vacuum System Design of the MIT-Bates South Hall Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3851-3854.
Back to search