JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. M. Polozov, A. S. Plastun, and P. R. Safikanov, “Optimization of IH-DTL Resonator for UNDULAC-RF”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC039, pp. 160-162. 
[n]	G.-H. Luo et al., “Operation Experience of Top-up injection at Taiwan Light Source”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA034, pp. 151-153. 
[n]	E. Lin, C.-K. Ng, and K. Ko, “HOM Power Generation and Propagation in the PEP-II B-Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P028, pp. 3033-3035. 
[n]	V. L. Uvarov et al., “Beam-power Calibration System for Industrial Electron Accelerators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT141, pp. 2167-2169. 
[n]	Y. Shobuda et al., “Coupled Bunch Instability and Its Cure at J-PARC RCS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2946-2949. doi:10.18429/JACoW-IPAC2017-WEPIK014
[n]	H. Fukuma et al., “Beam Instrumentation for the SuperKEKB Rings”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOCB01, pp. 6-10. 
[n]	B. C. Brown, “Collimation System for Beam Loss Localization with Slip Stacking Injection in the Fermilab Main Injector”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC11, pp. 312-319. 
[n]	N. Kuklev, Y. K. Kim, and A. L. Romanov, “Synchrotron Radiation Beam Diagnostics for the Integrable Optics Test Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2073-2076. doi:10.18429/JACoW-IPAC2018-WEPAG005
[n]	B. Cox, P. O. Mazur, and A. Van Ginneken, “Sensitivity of an Energy Doubler Dipole to Beam Induced Quenches”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3885-3888. 
[n]	G. Olea and N. Huber, “OCTOGLIDE - Table Positioning Device for Diffraction Applications”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 38-40. doi:10.18429/JACoW-MEDSI2016-MOPE17
[n]	Ch. Wang, L. H. Chang, K. T. Hsu, C. C. Kuo, W. K. Lau, and G. H. Luo, “Preliminary Study on SRRC Storage Ring Impedance”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1099-1102. 
[n]	H. Kobayashi, T. Adachi, T. Kawakubo, and X. Liu, “SI-Thyristor Matrix Array Driven Electrostatic Injection Kicker for the KEK Digital Accelerator and Beam Dynamics Analysis of Injection”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA26, pp. 101-103. 
[n]	A. Sounas, M. Gasior, and T. Lefevre, “BPM Technologies for Quadrupolar Moment Measurements”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 399-403. doi:10.18429/JACoW-HB2018-THA1WE03
[n]	E. Lessner and M. White, “Bremsstrahlung Pair-Production of Positrons with Low Neutron Background”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4100, pp. 306-308. 
[n]	K. Endo et al., “Software System for the Operation of the TRISTAN-AR Power Supply”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2926-2929. 
[n]	E. Sombrowski, O. Hensler, R. Kammering, K. Rehlich, and A. Petrosyan, “First Experiences with a Central Error Server Using Web Services”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper FR112, pp. XX-XX. 
[n]	G. Rumolo and E. M?®tral, “Simulations of Single Bunch Collective Effects Using HEADTAIL”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper MOA2IS02, pp. 59-64. 
[n]	S. Fartoukh and J.-B. Jeanneret, “Using Microwave Quadrupoles to Shorten the CLIC Beam Delivery Section”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B15, pp. 480-482. 
[n]	Y. Zhang, X. C. Kang, M. Li, J. X. Wu, and G. Zhu, “Design of Cold Beam Position Monitor for CADS Injector II Proton LINAC”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC13, pp. 75-77. 
[n]	C. Perkins et al., “Vacuum System Design for the PEP-II B Factory High-Energy Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2482-2485. 
[n]	F. Ruggiero, “Consequences of the Discontinuous Replacement of Radiated Energy on the Performance of LEP 200”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1298-1301. 
[n]	M. Comunian, E. Fagotti, A. Pisent, and P. A. Posocco, “Beam Dynamics of the IFMIF-EVEDA RFQ”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP075, pp. 3536-3538. 
[n]	G.-H. Luo et al., “Testing Results of Major Components and Progress Report of TLS Superconducting Cavity Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO033, pp. 2262-2264. 
[n]	A. Sumbaev, “IREN Test Facility at JINR”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP68, pp. 505-507. 
[n]	K. L. F. Bane, G. V. Stupakov, and J. Tu, “Reflectivity Measurements for Copper and Aluminum in the Far Infrared and the Resistive Wall Impedance in the LCLS Undulator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH073, pp. 2955-2957. 
[n]	Y. Hashimoto et al., “Beam Profile Monitor for Slow Extracted Beam Using Multi-Layered Graphene at J-PARC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2532-2535. doi:10.18429/JACoW-IPAC2019-WEPGW030
[n]	C. E. Reece, A. C. Crawford, and R. L. Geng, “Improved Performance of JLab 7-Cell Cavities by Electropolishing”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP055, pp. 2126-2128. 
[n]	I. Agapov, T. Charles, and E. Musa, “Orbit-response based optics corrections for FCC-ee”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3143-3146. doi:10.18429/JACoW-IPAC2023-WEPL017
[n]	G. Baud, B. Dehning, J. Emery, J-J. Gras, A. Guerrero, and E. P. Piselli, “Performance Assessment of Wire-Scanners at CERN”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF03, pp. 499-502. 
[n]	M. K. Sullivan et al., “Anomalous High Radiation Beam Aborts in the PEP-II B-factory”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS049, pp. 652-654. 
[n]	N. Angert, L. Dahl, J. Glatz, J. Klabunde, M. Mueller, and B. Wolf, “UNILAC Modifications for an Improved Synchrotron Injector Performance”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 503-506. 
[n]	J. R. Zagel et al., “Permanent Magnet Ion Profile Monitor at the Fermilab Main Injector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH036, pp. 1303-1305. 
[n]	J. M. Peterson et al., “Dynamic Aperture Measurements at the Tevatron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 266-269. 
[n]	L. Wang, T. O. Raubenheimer, and G. V. Stupakov, “Suppression of Secondary Emission in a Magnetic Field using Sawtooth Surface”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS143, pp. 897-899. 
[n]	B. Walasek-H?Âhne, W. Ensinger, P. Forck, E. Guetlich, and R. Haseitl, “Light Yield, Imaging Properties and Spectral Response of Inorganic Scintillators Under Intense Ion Irradiation”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM019, pp. 151-155. 
[n]	B. R. P. Gamage and T. Satogata, “Bunch Splitting Simulations for the JLEIC Ion Collider Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2448-2450. doi:10.18429/JACoW-IPAC2016-WEPMW013
[n]	Y. Nakamura, K. Arakawa, I. Ishibori, and T. Nara, “Estimation of Charge Exchange Cross Section for Heavy Ions Accelerated in the JAERI AVF Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-27, pp. 250-253. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search