Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. S. Dey, S. Ghosh, A. Mandal, S. Seth, A. Singh, and S. S. Som, “FPGA Based Amplitude Control System for Accelerating Cavities”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD50, pp. 239-241.
[n] G. Penco et al., “Time-Sliced Emittance and Energy Spread Measurements at FERMI@Elettra”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD20, pp. 417-420.
[n] E. Allaria and G. De Ninno, “Implementation of Single-Stage ECHO-Enabled Harmonic Generation on the FERMI@eELETTRS FEL”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEOB4, pp. 354-357.
[n] G. A. Moortgat-Pick et al., “Depolarization and Beam-beam Effects at the Linear Collider”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP024, pp. 598-600.
[n] C. R. Meitzler, P. Datte, F. R. Huson, P. Tompkins, and D. Raparia, “Progress on the TAC Ion Source and LEBT”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH444, pp. 710-712.
[n] Y. Liu, S. Sun, J. Wang, L. Wang, S. Y. Wang, and X. L. Guo, “Design of the Cold Mass Support Assembly of Test Cryomodule for IMP ADS-Injector II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME019, pp. 3543-3545.
[n] M. Karlsson, B. Anderberg, and S. Rosander, “Study of a 10 MeV, 50 kW Racetrack Microtron for Industrial Radiation Processing”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1715-1718.
[n] M. Haj Tahar, F. Meot, and S. Peggs, “Energy Efficiency of High Power Accelerators for ADS Applications”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2001-2003. doi:10.18429/JACoW-IPAC2016-TUPOY044
[n] J. Crittenden et al., “Electron Cloud Modeling Results for Time-Resolved Shielded Pickup Measurements at CesrTA”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper PST09, pp. 123-129.
[n] M. Haj Tahar and F. Meot, “Effect of the Beam Time Structure on the Neutronics of an Accelerator Driven Subcritical Reactor”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2004-2006. doi:10.18429/JACoW-IPAC2016-TUPOY045
[n] E. Bravin et al., “First Results of the LHC Collision Rate Monitors”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD82, pp. 497-499.
[n] D. Ramos, “Modeling of the RF-shield Sliding Contact Fingers for the LHC Cryogenic Beam Vacuum Interconnects Using Implicit and Explicit Finite Element Formulations”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD035, pp. 1503-1505.
[n] W. A. Gillespie, E. A. Hughes, N. Marks, and G. Saxon, “A Recirculating Linac as an Injector for Small Storage Rings or Free Electron Lasers”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-45, pp. 557-559.
[n] K. C. D. Chan et al., “Accelerator Performance Demonstration Facility in Los Alamos”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-23, pp. 101-103.
[n] D. Xu et al., “EIC Beam Dynamics Challenges”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1576-1582. doi:10.18429/JACoW-IPAC2022-WEIXGD1
[n] M. J. Kellermeier et al., “Current Profile Reconstruction by Passive Streaking of Low Charge, Low Energy Electron Bunches in Dielectric Loaded Waveguides”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6041, unpublished.
[n] F. Hagenbuck et al., “Status of the High Energy Beam Transport System for FAIR”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3705-3708. doi:10.18429/JACoW-IPAC2015-THPF012
[n] N. I. Alinovsky et al., “Series of High Voltage Ion Accelerators for Use in Industrial Technological Lines”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1711-1714.
[n] P. R. Sarma and R. K. Bhandari, “A New Method of Finding the Pole Profile in Quadrupole Magnets for Obtaining High Field Quality”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-06, pp. 470-473.
[n] A. V. Fedotov, “Progress of High-energy Electron Cooling for RHIC”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper MOM2I03, pp. 11-15.
[n] V. L. Granatstein et al., “Prospects for Developing Microwave Amplifiers to Drive Multi-TeV Linear Colliders”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ17, pp. 1561-1562.
[n] D. M. Gassner et al., “Coherent Electron Cooling Proof of Principle Phase 1 Instrumentation Status”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP093, pp. 956-959.
[n] C. Weidemann, M. Bai, F. Hinder, and B. Lorentz, “Model Driven Machine Improvement of COSY Based on ORM Data”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3240-3243. doi:10.18429/JACoW-IPAC2016-THPMB009
[n] S. Pugh and B. Ng, “Vacuum Control System for the MLI Model 1.2-400 Synchrotron Light Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1514-1516.
[n] M. Kuntze, “Additional Design Criteria for low B Structures”, in Proc. SRF'80, Karlsruhe, Germany, Jul. 1980, paper SRF80-11, pp. XX-XX.
[n] J. Perez Espinos and C. Garion, “Analysis and Testing of a New RF Bridge Concept as an Alternative to Conventional Sliding RF Fingers in LHC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3660-3662. doi:10.18429/JACoW-IPAC2016-THPMY006
[n] P. Evtushenko, S. V. Benson, D. Douglas, and D. W. Sexton, “Electron Beam Timing Jitter and Energy Modulation Measurements at the JLab ERL”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THCAU03, pp. 517-520.
[n] J. Abraham, “Transient Wave Propagation in Linear Accelerators”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VI-08, pp. 337-343.
[n] J. V. Lebacqz, A. J. Dudas, and W. R. Fowkes, “The Trirotron”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3891-3894.
[n] L. Giannessi et al., “The Fermi Seeded FEL Facility: Operational Experience and Future Perspectives”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 57-60. doi:10.18429/JACoW-FEL2015-MOP013
[n] C. Liu, R. L. Hulsart, K. Mernick, R. J. Michnoff, and M. G. Minty, “Optimize the Algorithm for the Global Orbit Feedback at Fixed Energies and During Acceleration in RHIC”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 612-615. doi:10.18429/JACoW-NAPAC2016-TUPOB55
[n] S. N. Simrock, “Achieving Phase and Amplitude Stability in Pulsed Superconducting Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAA002, pp. 473-477.
[n] R. C. Gupta, G. H. Morgan, and P. Wanderer, “A Comparison of Calculations and Measurements of the Magnetic Characteristics of the SSC Design D Dipole”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1405-1408.
[n] A. Ratti et al., “Test Results of the Luminosity Monitors for the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP073, pp. 3612-3614.
[n] T. A. Antaya, D. Cole, P. Miller, and D. Poe, “K1200 Cyclotron Beam Development Techniques”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXB-03, pp. 427-430.
[n] U. Iriso et al., “Analysis of Electron Cloud at RHIC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT177, pp. 2239-2241.
[n] T. Kulevoy et al., “LEGIS Facility for Study of Reactor Steels Radiation Resistance”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper MOPPH017, pp. 71-74.
[n] V. V. Parkhomchuk, “Comparison of Hollow Electron Devices and Electron Heating”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper TUM1I03, pp. 64-67.
[n] D. A. Lee, C. Gabor, J. K. Pozimski, and P. Savage, “A Laser-Based Beam Profile Measuring Instrument for the Front End Test Stand at RAL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP051, pp. 3567-3569.
For LaTeX
Use Complete Form
For BibTeX
References
- M. S. Dey, S. Ghosh, A. Mandal, S. Seth, A. Singh, and S. S. Som, “FPGA Based Amplitude Control System for Accelerating Cavities”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD50, pp. 239-241.
- G. Penco et al., “Time-Sliced Emittance and Energy Spread Measurements at FERMI@Elettra”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEPD20, pp. 417-420.
- E. Allaria and G. De Ninno, “Implementation of Single-Stage ECHO-Enabled Harmonic Generation on the FERMI@eELETTRS FEL”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEOB4, pp. 354-357.
- G. A. Moortgat-Pick et al., “Depolarization and Beam-beam Effects at the Linear Collider”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP024, pp. 598-600.
- C. R. Meitzler, P. Datte, F. R. Huson, P. Tompkins, and D. Raparia, “Progress on the TAC Ion Source and LEBT”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH444, pp. 710-712.
- Y. Liu, S. Sun, J. Wang, L. Wang, S. Y. Wang, and X. L. Guo, “Design of the Cold Mass Support Assembly of Test Cryomodule for IMP ADS-Injector II”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME019, pp. 3543-3545.
- M. Karlsson, B. Anderberg, and S. Rosander, “Study of a 10 MeV, 50 kW Racetrack Microtron for Industrial Radiation Processing”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1715-1718.
- M. Haj Tahar, F. Meot, and S. Peggs, “Energy Efficiency of High Power Accelerators for ADS Applications”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2001-2003.
- J. Crittenden et al., “Electron Cloud Modeling Results for Time-Resolved Shielded Pickup Measurements at CesrTA”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper PST09, pp. 123-129.
- M. Haj Tahar and F. Meot, “Effect of the Beam Time Structure on the Neutronics of an Accelerator Driven Subcritical Reactor”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2004-2006.
- E. Bravin et al., “First Results of the LHC Collision Rate Monitors”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD82, pp. 497-499.
- D. Ramos, “Modeling of the RF-shield Sliding Contact Fingers for the LHC Cryogenic Beam Vacuum Interconnects Using Implicit and Explicit Finite Element Formulations”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD035, pp. 1503-1505.
- W. A. Gillespie, E. A. Hughes, N. Marks, and G. Saxon, “A Recirculating Linac as an Injector for Small Storage Rings or Free Electron Lasers”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-45, pp. 557-559.
- K. C. D. Chan et al., “Accelerator Performance Demonstration Facility in Los Alamos”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-23, pp. 101-103.
- D. Xu et al., “EIC Beam Dynamics Challenges”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1576-1582.
- M. J. Kellermeier et al., “Current Profile Reconstruction by Passive Streaking of Low Charge, Low Energy Electron Bunches in Dielectric Loaded Waveguides”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6041, this conference.
- F. Hagenbuck et al., “Status of the High Energy Beam Transport System for FAIR”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3705-3708.
- N. I. Alinovsky et al., “Series of High Voltage Ion Accelerators for Use in Industrial Technological Lines”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1711-1714.
- P. R. Sarma and R. K. Bhandari, “A New Method of Finding the Pole Profile in Quadrupole Magnets for Obtaining High Field Quality”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-06, pp. 470-473.
- A. V. Fedotov, “Progress of High-energy Electron Cooling for RHIC”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper MOM2I03, pp. 11-15.
- V. L. Granatstein et al., “Prospects for Developing Microwave Amplifiers to Drive Multi-TeV Linear Colliders”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ17, pp. 1561-1562.
- D. M. Gassner et al., “Coherent Electron Cooling Proof of Principle Phase 1 Instrumentation Status”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP093, pp. 956-959.
- C. Weidemann, M. Bai, F. Hinder, and B. Lorentz, “Model Driven Machine Improvement of COSY Based on ORM Data”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3240-3243.
- S. Pugh and B. Ng, “Vacuum Control System for the MLI Model 1.2-400 Synchrotron Light Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1514-1516.
- M. Kuntze, “Additional Design Criteria for low B Structures”, in Proc. 1st Int. Conf. RF Superconductivity (SRF'80), Karlsruhe, Germany, Jul. 1980, paper SRF80-11, pp. XX-XX.
- J. Perez Espinos and C. Garion, “Analysis and Testing of a New RF Bridge Concept as an Alternative to Conventional Sliding RF Fingers in LHC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3660-3662.
- P. Evtushenko, S. V. Benson, D. Douglas, and D. W. Sexton, “Electron Beam Timing Jitter and Energy Modulation Measurements at the JLab ERL”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper THCAU03, pp. 517-520.
- J. Abraham, “Transient Wave Propagation in Linear Accelerators”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper VI-08, pp. 337-343.
- J. V. Lebacqz, A. J. Dudas, and W. R. Fowkes, “The Trirotron”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3891-3894.
- L. Giannessi et al., “The Fermi Seeded FEL Facility: Operational Experience and Future Perspectives”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 57-60.
- C. Liu, R. L. Hulsart, K. Mernick, R. J. Michnoff, and M. G. Minty, “Optimize the Algorithm for the Global Orbit Feedback at Fixed Energies and During Acceleration in RHIC”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 612-615.
- S. N. Simrock, “Achieving Phase and Amplitude Stability in Pulsed Superconducting Cavities”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAA002, pp. 473-477.
- R. C. Gupta, G. H. Morgan, and P. Wanderer, “A Comparison of Calculations and Measurements of the Magnetic Characteristics of the SSC Design D Dipole”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1405-1408.
- A. Ratti et al., “Test Results of the Luminosity Monitors for the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP073, pp. 3612-3614.
- T. A. Antaya, D. Cole, P. Miller, and D. Poe, “K1200 Cyclotron Beam Development Techniques”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXB-03, pp. 427-430.
- U. Iriso et al., “Analysis of Electron Cloud at RHIC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT177, pp. 2239-2241.
- T. Kulevoy et al., “LEGIS Facility for Study of Reactor Steels Radiation Resistance”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper MOPPH017, pp. 71-74.
- V. V. Parkhomchuk, “Comparison of Hollow Electron Devices and Electron Heating”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper TUM1I03, pp. 64-67.
- D. A. Lee, C. Gabor, J. K. Pozimski, and P. Savage, “A Laser-Based Beam Profile Measuring Instrument for the Front End Test Stand at RAL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP051, pp. 3567-3569.
Back to search