JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. A. Fakhri, A. D. Ghodke, and G. Singh, “Injection into Indus-2”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15030, pp. XX-XX. 
[n]	E. Blanco Vi??uela et al., “Working under Pandemic Conditions: Contact Tracing Meets Technology”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 121-125. doi:10.18429/JACoW-ICALEPCS2021-MOPV010
[n]	D. C. Zhu, J. S. Cao, Y. F. Sui, J. H. Yue, and J. Chen, “Beam Profile Measurement Using Kirkpatrick Baez Mirror Optics at Shanghai Synchrotron Radiation Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 167-170. doi:10.18429/JACoW-IPAC2016-MOPMB036
[n]	M. Favier et al., “Capabilities and Performance of the LHC Schottky Monitors”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD06, pp. 44-46. 
[n]	A. Benton and C. Agritellis, “Space Charge Effects on Longitudinal Motion in Proton Linacs”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper V-09, pp. 243-244. 
[n]	C. J. Richard and S. M. Lidia, “Frequency Spectra From Solenoid Lattice Orbits”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 417-419. doi:10.18429/JACoW-LINAC2016-TUPRC004
[n]	S. F. Mikhailov, H. Hao, V. Popov, and Y. K. Wu, “Developing an Improved Pulsed Mode Operation for Duke Storage Ring Based FEL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1860-1862. doi:10.18429/JACoW-IPAC2015-TUPMA012
[n]	R. Salemme, V. Baglin, G. Bregliozzi, and P. Chiggiato, “Vacuum Performance of Amorphous Carbon Coating at Cryogenic Temperature with Presence of Proton Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3663-3666. doi:10.18429/JACoW-IPAC2016-THPMY007
[n]	M. Masuzawa et al., “SuperKEKB IR upgrade idea with Nb₃Sn quadrupole magnets”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2872-2874. doi:10.18429/JACoW-IPAC2024-WEPS74
[n]	A. Hisano et al., “R&D of the KEK Linac Accelerator Tuning Using Machine Learning”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 640-644. doi:10.18429/JACoW-ICALEPCS2021-WEPV010
[n]	M. Fujieda et al., “An RF Cavity for Barrier Bucket Experiment in the AGS”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D012, pp. 408-410. 
[n]	K. D. Dumbell et al., “Some Interesting Observations During Vertical Test on ESS-HB-704 SRF Cavities”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 812-813. doi:10.18429/JACoW-LINAC2022-THPOGE05
[n]	T. Rizawa, M. Nakano, K. Satoh, Y. Satoh, and Y. Tanabe, “R. F. Characteristics of 508 MHz Slot-Coupled Mulit-Cell Cavity”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 916-919. 
[n]	A. Huschauer, S. S. Gilardoni, and R. Wasef, “Influence of the Alignment of the Main Magnets on Resonances in the CERN Proton Synchrotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 392-394. doi:10.18429/JACoW-IPAC2015-MOPJE046
[n]	M. Choi, J. D. Gonczy, J. W. Howell, and R. C. Niemann, “ANL Advanced Photon Source Crotch Absorber Design”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2301-2304. 
[n]	J. Harzheim, D. Domont-Yankulova, H. Klingbeil, R. K?Ânigstein, and M. Frey, “Modeling and Simulation of Broadband RF Cavities in PSpice”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 392-395. doi:10.18429/JACoW-IPAC2016-MOPMW002
[n]	Z. Patel et al., “An in-vacuum measurement system for CPMUs at Diamond Light Source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1196-1199. doi:10.18429/JACoW-IPAC2023-MOPM095
[n]	N. Voumard, C. Boucly, M. P. Pimentel, P. Van Trappen, and L. Strobino, “Use of Multi-Network Fieldbus for Integration of Low-Level Intelligent Controller Within Control Architecture of Fast Pulsed System at CERN”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 590. doi:10.18429/JACoW-ICALEPCS2019-MOPHA152
[n]	R. Klein et al., “Accurate Measurement of the MLS Electron Storage Ring Parameters”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 600-603. doi:10.18429/JACoW-IBIC2016-WECL02
[n]	H. Ikeda, J. W. Flanagan, H. Fukuma, S. Hiramatsu, and T. Mitsuhashi, “Crabbing Angle Measurement by Streak Camera at KEKB”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN035, pp. 4018-4020. 
[n]	J. Kidd et al., “A High Intensity Beam Dump for the Tevatron Beam Abort System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2774-2777. 
[n]	Y.-C. Chae, K. Harkay, and X. Sun, “Longitudinal Coupling Impedance of the APS Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB003, pp. 3014-3016. 
[n]	G. Carron et al., “Observation of Transverse Quadrupole Mode Instabilities in Intense Cooled Antiproton Beams in the AA”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 803-806. 
[n]	A. R. D. Rodrigues et al., “Sirius Status Report”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2811-2814. doi:10.18429/JACoW-IPAC2016-WEPOW001
[n]	G. Gammel et al., “First Results on the BNL H MEQALAC”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper C01, pp. 89-91. 
[n]	D. D. Bhawalkar et al., “Indian Programe to Develop High Current Proton Linac for ADSS”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO414, pp. 70-72. 
[n]	S. K. Shukla, R. Sridhar, D. P. Yadav, R. J. Patel, and A. S. Raja Rao, “Design Aspects of UHV System for INDUS-2.”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D043, pp. 779-781. 
[n]	K. F. Johnson et al., “The Single-Beam Funnel Demonstration: Experiment and Simulation”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH441, pp. 701-703. 
[n]	R. Mishra, R. K. Agrawal, P. Fatnani, B. N. Merh, C. P. Navathe, and S. Pal, “Data Logging System Upgrade for Indus Accelerator”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD01, pp. 12-14. 
[n]	K. Hwang and J. Qiang, “Numerical Shot Noise Modeling and Particle Migration Scheme”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4274-4276. doi:10.18429/JACoW-IPAC2018-THPMF084
[n]	A. Gerbershagen, D. Schulte, and P. Burrows, “Simulation of Phase Stability at the Flat Top of the CLIC Drive Beam”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC013, pp. 1018-1020. 
[n]	S. V. Kuzikov et al., “Studies of Thermal Fatigue Caused by Pulsed RF Heating”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH140, pp. 1343-1345. 
[n]	E. Syresin et al., “NICA Ion Collider and Plans of Its First Operations”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1819-1821. doi:10.18429/JACoW-IPAC2022-WEPOPT001
[n]	H. Jagdfeld et al., “NEG Coated Vacuum Chambers and Bake-Out-Concept for the HESR at FAIR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2745-2747. doi:10.18429/JACoW-IPAC2018-WEPML028
[n]	K. F. Johnson et al., “Commissioning of the Ground Test Accelerator Intertank Matching Section”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-09, pp. 61-63. 
[n]	G. R. S. Franco, S. Furquim, O. Monteiro, A. R. Rodrigues, and C. Scorzato, “LNLS Control System Conceptual Design”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1651-1654. 
[n]	T. Katayama, T. Kikuchi, F. Nolden, G. Schreiber, M. Steck, and H. Stockhorst, “Simulation Study of Barrier Bucket Accumulation with Stochastic Cooling at the GSI ESR”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper TUPS19, pp. 136-139. 
[n]	A. I. Warwick et al., “Development of Heavy Ion Induction Linear Accelerators as Drivers for Inertial Confinement Fusion”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1521-1523. 
[n]	B. Nash, D. T. Abell, N. B. Goldring, P. Moeller, and I. V. Pogorelov, “Propagation of Gaussian Wigner Function Through a Matrix-Aperture Beamline”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2755-2758. doi:10.18429/JACoW-IPAC2022-THPOPT067
[n]	B. Cheymol, E. Bravin, C. Dutriat, and T. Lef?¿vre, “Design of a New Emittance Meter for LINAC4”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD42, pp. 396-398. 
[n]	G. Muelhaupt, G. Schmidt, and U. Weinrich, “First Results of Beam Storing in the ESRF Booster Synchrotron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP037G, pp. 635-637. 
[n]	S. Pavis et al., “A Modular Approach for Accelerator Controls Components Deployment for High Power Pulsed Systems”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 788-792. doi:10.18429/JACoW-ICALEPCS2023-TUPDP101
[n]	T. M. Mitsuhashi, H. Ikeda, and G. Mitsuka, “Effect of Incoherent Depth of Field for Bean Halo Measurement with the Coronagraph in SuperKEKB”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 335-338. doi:10.18429/JACoW-IBIC2023-WEP005
[n]	M. Umezawa et al., “Beam Commissioning of the New Proton Therapy System for University of Tsukuba”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAA005, pp. 648-650. 
[n]	D. Horan, L. Solita, D. Reigle, and N. Dimonte, “Design and Construction of the Advanced Photon Source 352-MHz RF System Switching Control”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P037, pp. 3690-3692. 
[n]	A. Ledeul, G. Segura, R. P. I. Silvola, B. Styczen, and D. Vasques Ribeira, “REMUS: The new CERN Radiation and Environment Monitoring Unified Supervision”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 574-577. doi:10.18429/JACoW-ICALEPCS2015-TUD3O03
[n]	J-C. Tournier, B. Fern?índez Adiego, and I. D. Lopez-Miguel, “PLCverif: Status of a Formal Verification Tool for Programmable Logic Controller”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 248-252. doi:10.18429/JACoW-ICALEPCS2021-MOPV042
[n]	T. Norimine, K. Hiramoto, and M. Umezawa, “A Design of a Rotating Gantry with Easy Steering for Proton Therapy”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI094, pp. 2751-2753. 
[n]	M. Reiser, P. Delphin, F. Dupont, and T. Zinneman, “Center-Region Design and Initial Orbits in the Maryland University Isochronous Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 449-454. 
[n]	G. E. Boorman et al., “Characterising the Signal Processing System for Beam Position Monitors at the Front End Test Stand”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 526-529. doi:10.18429/JACoW-IBIC2015-TUPB073
[n]	E. Knapp, “New Directions in Science”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THSPEC, pp. 881-886. 
[n]	K. Nakayoshi, Y. Fujii, T. Nakadaira, and K. Sakashita, “Development of an Expert System for the High Intensity Neutrino Beam Facility at J-PARC”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 154-158. doi:10.18429/JACoW-IBIC2018-MOPC18
[n]	P. Zhu et al., “The Status of Fast Obit Feedback System of HEPS”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 540-543. doi:10.18429/JACoW-ICALEPCS2021-WEAL03
[n]	Y. Sato et al., “Push-Pull Amplifier for MA-Loaded Cavity”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D008, pp. 396-398. 
[n]	L. G. Zhang et al., “Parallel Particle Movement Simulation Algorithm Based on Heterogeneous Computing”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2654-2657. doi:10.18429/JACoW-IPAC2016-WEPMY043
[n]	P. K. Saha et al., “Status of Proof-of-Principle Demonstration of 400 MeV H-Stripping to Proton by Using Only Lasers at J-PARC”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 422-427. doi:10.18429/JACoW-HB2018-THP1WC02
[n]	V. D. Shiltsev, J. S. Eldred, V. A. Lebedev, and K. Seiya, “Beam Losses and Emittance Growth Studies at the Record High Space-Charge in the Booster”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2552-2555. doi:10.18429/JACoW-IPAC2021-WEXB08
[n]	K. Nakayoshi, Y. Fujii, and K. Sakashita, “Improvements in the T2K Primary Beamline Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA10, pp. 940-943. 
[n]	T. Ota et al., “Activities on Superconducting Cavities at Toshiba”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A28, pp. 254-260. 
[n]	J. Y. Li, B. Jia, S. F. Mikhailov, V. Popov, Y. K. Wu, and S. Huang, “Manipulating the FEL gain process with an In-cavity Aperture System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP153, pp. 2405-2407. 
[n]	J. Lewis, J. C. Bau, J. Serrano, D. Dom?¡nguez, and P. A. Sanchez, “The Evolution of the CERN SPS Timing System for the LHC Era”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP535, pp. XX-XX. 
[n]	B. Campbell, K. C. D. Chan, E. Newman, and R. Valicenti, “APT Cryomodule Assembly Process and Mockup Model”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP130, pp. 971-973. 
[n]	G. Sterbini, S. Doebert, R. L. Lillestol, E. Marin, D. Schulte, and E. Adli, “Beam-based Alignment in CTF3 Test Beam Line”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR034, pp. 1894-1896. 
[n]	K. Hiramoto, M. Tadokoro, J. I. Hirota, M. Nishi, and K. Noda, “Energy Varying Resonant Beam Extraction from the Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAB03, pp. 113-115. 
[n]	R. J. Pasquinelli et al., “Stacktail Momentum Cooling in the Fermilab Antiproton Source”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1132-1135. 
[n]	V. C. Sahni et al., “Indian Participation in LHC, SPL and CTF-3 Projects at CERN, Switzerland”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA131, pp. 829-831. 
[n]	T et al., “The Characteristics of Different Magnetic Material for RF Cavity under Perpendicular Magnetization”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D015, pp. 417-419. 
[n]	C. H. Chang et al., “Conceptual Design for the SRRC Elliptically Polarizing Undulator EPU5.6. - Part I: Magnetic Configuration and Merit Function Optimization”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP124G, pp. 2567-2569. 
[n]	A. Y. Molodozhentsev and E. Forest, “Effects of Coherent Resonances for the J-PARC Main Ring at the Moderate Beam Power”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP026, pp. 3251-3253. 
[n]	S. A. Antipov and S. Nagaitsev, “H?®non-Heiles Single Particle Dynamics at IOTA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2508-2511. doi:10.18429/JACoW-IPAC2017-WEOAB1
[n]	A. Kisiel et al., “BPM Based Optics Correction of the Solaris 1.5 GeV Storage Ring”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 836-839. doi:10.18429/JACoW-IBIC2016-WEPG78
[n]	G. D. Alton et al., “Absolute Charge State Yields of 20 MeV I Ions Scattered from Argon and Xenon”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1685-1690. 
[n]	Z. Ni, L. Li, J. Liu, J. Luo, and X. Zhou, “Design of a Component-Oriented Distributed Data Integration Model”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 202-205. doi:10.18429/JACoW-ICALEPCS2021-MOPV032
[n]	A. Smirnov et al., “Ordered Ion Beam in Storage Rings”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT094, pp. 2715-2717. 
[n]	M. S. Champion, R. A. Dean, J. Galambos, M. P. Howell, M. A. Plum, and B. W. Riemer, “Progress on the Proton Power Upgrade of the Spallation Neutron Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2445-2448. doi:10.18429/JACoW-IPAC2017-TUPVA147
[n]	P. Horodek et al., “Positron Annihilation Spectroscopy at LEPTA Facility”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC044, pp. 532-534. 
[n]	J. H. Hetzel et al., “Beam-Dynamics Simulation Studies for the HESR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3084-3086. doi:10.18429/JACoW-IPAC2017-WEPIK067
[n]	R. Chasman, “Numerical Calculations of Coupling Effects in a Low Energy Proton Linac”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper V-05, pp. 224-228. 
[n]	U. Lehnert, P. Michel, R. Schurig, A. A. Aksoy, P. E. Evtushenko, and J. M. Kr?ñmer, “Bunch Compression of the Low-energy ELBE Electron Beam for Super-radiant THz Sources”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1123-1125. doi:10.18429/JACoW-IPAC2014-TUPRO044
[n]	A. Chapman-Hatchett, V. Chohan, and T. E. d'Amico, “Tune Measurement for the CERN Proton Synchrotron Booster Rings using DSP in VME”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA146, pp. 2202-2204. 
[n]	K. Fan, Y. Arakaki, and I. Sakai, “Eddy Current Effects in an Opposite-field Septum”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN032, pp. 227-229. 
[n]	E. I. Simakov, C. Huang, T. J. Kwan, and D. Y. Shchegolkov, “Shaping Electron Bunches for Ultra-bright Electron Beam Acceleration in Dielectric Loaded Waveguides”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA13, pp. 613-615. 
[n]	W. A. Barletta, “Energy and Luminosity Limits of Hadron Supercolliders”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3817-3820. 
[n]	T. Toyama et al., “Measurement of Transverse Multipole Moments of the Proton Beam in the J-PARC MR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 274-276. doi:10.18429/JACoW-IPAC2017-MOPAB069
[n]	S. W. Mosko, “RF Power System for the Separated-Orbit Cyclotron Experiment”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 246-250. 
[n]	J.-L. Revol et al., “Highlights of Accelerator Activities in France on behalf of the Accelerator Division of the French Physics Society”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA048, pp. 181-183. 
[n]	P. Lapostolle, E. Tanke, and S. Valero, “New General Beam Dynamics Formulation for the Program DYNAC”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-64, pp. 790-792. 
[n]	F. Schmidt, E. Forest, and P. K. Skowronski, “MAD-X - An Accelerator Design Code”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WESEPP06, pp. 232-232. 
[n]	M. Nordby, E. F. Daly, N. Kurita, and J. Langton, “A Zero-Length Bellows for the PEP-II High-Energy Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP08, pp. 2051-2053. 
[n]	T. Griesemer et al., “ALS-U accumulator ring raft and dipole installation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1302-1304. doi:10.18429/JACoW-IPAC2024-TUPG35
[n]	N. Kuklev et al., “ML-enhanced commissioning of the APS-U accelerator complex”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1778-1781. doi:10.18429/JACoW-IPAC2024-TUPS50
[n]	M. Steck, “Current Plans for Beam Cooling at FAIR”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper MOIO03, pp. 10-14. 
[n]	K. Torikai et al., “Induction Accelerating Cavity for a Circular Ring Accelerator”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT066, pp. 704-706. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search