JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	D. P. McGinnis, M. Lindroos, and R. Miyamoto, “European Spallation Source Afterburner Concept”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO073, pp. 3924-3926. 
[n]	Q. X. Jin, H. Chen, and D. C. Tong, “Developing of a C-Band 9 MeV / 6 MeV SW Electron Linear Accelerating Tube”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA017, pp. 100-102. 
[n]	P. Pearce, H. Boer Rookhuizen, P. J. T. Bruinsma, T. R. Sherwood, and A. Vogel, “A Large-Aperture Pulsed-Septum Magnet for Antiproton Injection into the CERN AC Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3613-3616. 
[n]	R. T. P. D, J. K. Jones, B. D. Muratori, and S. B. van der Geer, “Modelling of the EMMA ns-FFAG Ring using GPT”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO056, pp. 1994-1996. 
[n]	W. Xu et al., “Design, Simulation and Conditioning of the Fundamental Power Couplers for BNL SRF Gun”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC114, pp. 2489-2491. 
[n]	Yu. V. Korotaev, I. N. Meshkov, S. V. Mironov, A. O. Sidorin, and E. Syresin, “The Low Energy Positron Storage Ring for Positronium Generation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP07B, pp. 853-855. 
[n]	S. Prestemon et al., “Design and Evaluation of a Short Period Nb3Sn Superconducting Undulator Prototype”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG010, pp. 1032-1034. 
[n]	N. Akasaka et al., “C-band RF Main Linac System for eE- Linear Collider at 500 GeV to 1 TeV C.M. Energy”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP087G, pp. 792-794. 
[n]	I. A. Ivanenko, B. Gikal, G. G. Gulbekyan, and N. Yu. Kazarinov, “DC280 Cyclotron Central Region with Independent Flat-Top System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS083, pp. 2703-2705. 
[n]	J. Dietrich, J. Bojowald, V. Kamerdjiev, and I. Mohos, “Recent Beam Diagnostic Developments at COSY-Juelich”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH313, pp. 2429-2431. 
[n]	C. L. Olson, “Phase Space Acceptance of LMF Transport Schemes”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1011-1014. 
[n]	M. Sosin, T. Dijoud, H. Mainaud Durand, and V. Rude, “Position Monitoring System for HL-LHC Crab Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2704-2706. doi:10.18429/JACoW-IPAC2016-WEPOR018
[n]	S. A. Martin et al., “Lifetime Studies for Polarized and Unpolarized Protons in COSY”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP097, pp. 5008-5010. 
[n]	E. S. Park, J. Choi, H.-S. Kang, M. Kim, E.-H. Lee, and T.-Y. Lee, “Operational Status at the PLS: Recent Improvements and Changes”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE046, pp. 2923-2925. 
[n]	M. G. Mazarakis et al., “Linear Inductive Voltage Adders IVA for Advanced Hydrodynamic Radiography”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4075, pp. 573-575. 
[n]	G. Tranquille et al., “Commissioning the ELENA Beam Diagnostics Systems at CERN”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2043-2046. doi:10.18429/JACoW-IPAC2018-WEPAF084
[n]	B. Chen, S. Chen, and E. J. N. Wilson, “A Computer Simulation of Injection into a Superconducting Synchrotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2599-2602. 
[n]	D. B. Belohrad, “First Tests of the Machine Protection System for CTF3”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW006, pp. XX-XX. 
[n]	I. Ortega et al., “Research and development of a radiation hard beam profile monitor for use in the CERN North Area secondary beamlines”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 350-354. doi:10.18429/JACoW-IBIC2025-TUPCO05
[n]	W. Bruns, “Short Range Wakepotentials Computed in a Moving Frame”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP087, pp. 1733-1734. 
[n]	S. Fabbri et al., “Magnet R&D for the muon collider: proposed R&D plans”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM090, unpublished. 
[n]	S. J. Park et al., “Developmental Status of PEFP/KAERI Beam Diagnostic System”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP21013, pp. XX-XX. 
[n]	Y. C. Yu et al., “The Monte Carlo Simulation for the Radiation Protection in a Nozzle of HUST-PTF”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 232-235. doi:10.18429/JACoW-IBIC2018-TUPA09
[n]	J. F. Hua, H. Chen, Q. X. Jin, J. Shi, and D. C. Tong, “Physical Design of 4 MeV/2.5 MeV Dual-Energy X-Band SW Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP089, pp. 4987-4989. 
[n]	C. L. Olson, “Intense Ion Beam Transport in Neutral Gas”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU434, pp. 396-398. 
[n]	A. Zelenski, G. Atoian, T. Lehn, D. Raparia, and J. Ritter, “High-Intensity Magnetron H- Ion Sources and Injector Development at BNL Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1564-1566. doi:10.18429/JACoW-IPAC2018-TUPML016
[n]	C. M. Cheng et al., “Effect of Ozonated Water Cleaning on Photon Stimulated Desorption in a Stainless Steel Chamber”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3778-3780. doi:10.18429/JACoW-IPAC2018-THPAL058
[n]	M. Kobal, J. F. Bergoz, J. Dedic, and R. Stefanic, “A Complete Solution for Beam Loss Monitoring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC050, pp. 1170-1172. 
[n]	N. Angert et al., “The 320 keV ESR-Electron Cooler”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1374-1377. 
[n]	G. Balbinot et al., “Beam Diagnostics in the CNAO Injection Lines commissioning”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD31, pp. 119-121. 
[n]	B. Sinha, “The Superconducting Cyclotron Project K500 at Calcutta Cyclotron Centre”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper B-05, pp. 53-56. 
[n]	W. Guo, M. Borland, K. C. Harkay, C.-X. Wang, and B. X. Yang, “A Kilohertz Picosecond X-Ray Pulse Generation Scheme”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN093, pp. 1133-1135. 
[n]	J. J. Choi et al., “High Power 35 GHz Gyroklystron Amplifiers”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P034, pp. 3159-3161. 
[n]	K. Papastergiou et al., “Recent developments in the accelerator equipment automation field”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 61-64. doi:10.18429/JACoW-IPAC2025-MOCN2
[n]	S. Rowan et al., “CSCM: EXPERIMENTAL AND SIMULATION RESULTS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3988-3990. doi:10.18429/JACoW-IPAC2014-THPRI093
[n]	R. Brinkmann, Y. Derbenev, M. Gentner, D. Husmann, and C. Steier, “Electron Cooling Possibilities for HERA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP54C, pp. 344-346. 
[n]	W. Bruns and R. Merte, “Simple and Fast Meshing in the Electromagnetic Field Solver GdfidL”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5A02, pp. 1016-1017. 
[n]	R. S. Celestre, K. Nowrouzi, H. A. Padmore, and D. A. Shapiro, “Nanosurveyor 2: A Compact Instrument for Nano-Ptychography at the Advanced Light Source”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 352-354. doi:10.18429/JACoW-MEDSI2018-THPH07
[n]	H. T. Edwards, “Planning for the New Linear Collider Test Facility at FNAL  Progress on 3.9GHz SRF”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THA02, pp. 412-414. 
[n]	W. Bruns, “Error Sensitivity of a Double Side Coupled Muffin-Tin”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2107-2110. 
[n]	L. Falbo, E. Bressi, and C. Priano, “Improvements on CNAO Accelerator for Ocular Treatments”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1194-1196. doi:10.18429/JACoW-IPAC2017-MOPVA145
[n]	J. M. C. Chaize, A. Hahto, L. Hardy, J. Mattila, and D. Robinson, “A Mobile Platform for Remote Inspection Inside ESRF Tunnel”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THD002, pp. 907-909. 
[n]	J. Han, O. R. Choi, J.-W. Kim, and C. K. Hwang, “Design of the RF System for the Accelerator Complex of Rare Isotope Science Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI041, pp. 2794-2796. 
[n]	OP. Odier, M. Ludwig, and S. Thoulet, “The DCCT for the LHC Beam Intensity Measurement”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD45, pp. 143-145. 
[n]	S. G. Arutunian, “Vibrating Wire Sensors For Beam Instrumentation”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper MOSTFA01, pp. 1-7. 
[n]	A. Buechler and D. Esperante Pereira, “The LHCb Silicon Tracker And Its Control System: From Scratch Towards Stable Operation”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP100, pp. XX-XX. 
[n]	T. D, K. A. Brown, A. Fernando, and S. Nemesure, “Building Controls Applications Using HTTP Services”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1320-1322. doi:10.18429/JACoW-ICALEPCS2017-THMPA06
[n]	P. Asimakopoulos and K. D. Papastergiou, “High Voltage Supply for Particle Accelerators Based on Modular Multilevel Converters”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3567-3569. doi:10.18429/JACoW-IPAC2016-THPMW014
[n]	B. B. D. Lomberg and C. P. Welsch, “Beam Halo Monitor Based on an HD Digital Micro Mirror Array”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF22, pp. 557-560. 
[n]	M. Haj Tahar et al., “Proton Beamline Simulations for the High Intensity Muon Beamline at PSI”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2036-2039. doi:10.18429/JACoW-IPAC2022-WEPOTK006
[n]	C. L. Olson, “Ionization Front Accelerator”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-44, pp. 364-366. 
[n]	M. Turner, V. Clerc, I. Gorgisyan, E. Gschwendtner, S. Mazzoni, and A. V. Petrenko, “Upgrade of the Two-Screen Measurement Setup in the AWAKE Experiment”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1682-1684. doi:10.18429/JACoW-IPAC2017-TUPIK001
[n]	X. Y. Li et al., “Design of Scanning Magnet Power Supply for HUST-PTF”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1269-1271. doi:10.18429/JACoW-IPAC2019-TUPMP017
[n]	S. G. Arutunian et al., “PETRA Proton Beam Profiling by Vibrating Wire Scanner”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT016, pp. XX-XX. 
[n]	A. Garonna, D. Abler, and C. Carli, “Proposal for a Slow Extraction System for a Biomedical Research Facility at CERN based on LEIR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 833-835. doi:10.18429/JACoW-IPAC2014-MOPRI094
[n]	X. W. Dong, K.-J. Kim, N. Sereno, C.-X. Wang, and A. Zholents, “Development of an Ultra-Low-Emittance RF PhotoInjector for a Future X-Ray FEL Oscillator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP280, pp. 2005-2007. 
[n]	G. Fernqvist, M. C. Bastos, A. Cantone, and Q. King, “Developments in High-precision Aspects of Power Converter Control for LHC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN070, pp. 314-316. 
[n]	Zh. X. Tang, L. Wang, and D. R. Xu, “Preliminary Physics Design of a Linac with the Variable Energy for Industrial Applications”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 530-532. doi:10.18429/JACoW-IPAC2018-MOPML055
[n]	F. Carra et al., “The MultiMat Experiment at CERN HiRadMat Facility: Advanced Testing of Novel Materials and Instrumentation for HL-LHC Collimators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 76-79. doi:10.18429/JACoW-IPAC2017-MOPAB005
[n]	V. Tzoganis and C. P. Welsch, “Alignment of a Nozzle-Skimmer System for a Non Invasive Gas Jet Based Beam Profile Monitor”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF01, pp. 803-806. 
[n]	T. A. Puntambekar et al., “Experience of Beam Diagnostic Systems in Commissioning Stage of Indus-2”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA065, pp. 413-415. 
[n]	L. Zeng, X. Wang, H. Yi, Y. Liang, and W. Zhang, “Physical design for EEHG beamlines of S3FEL”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL045, unpublished. 
[n]	D. Husmann, “Review of CW Electron Machines”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 62-67. 
[n]	L. Zhang et al., “An X-Band Linear Accelerator with Continuously-adjustable Beam Energy”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper WEPH22, pp. 68-70. 
[n]	Y. Y. Hu et al., “The Design of Dose Parameter Acquisition and Control System for a Pencil Beam Scanning System in HUST-PTF”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 143-146. doi:10.18429/JACoW-IBIC2018-MOPC14
[n]	S. Chouhan et al., “Design of Superferric Magnet for the Cyclotron Gas Stopper Project at the NSCL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS041, pp. 524-526. 
[n]	A. V. Smirnov et al., “Present Status of NICA Project”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper THPM2HA01, pp. 197-201. 
[n]	O. B. Malyshev and W. Bruns, “ILC DR Vacuum Design and E-cloud”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP057, pp. 673-675. 
[n]	P. L. Till, B. Koubek, A. Schempp, and J. S. Schmidt, “Simulations for a Buncher-Cavity at GSI”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP039, pp. 3821-3822. 
[n]	A. Huschauer et al., “Transverse Beam Splitting Made Operational: Recent Progress of the Multi-Turn Extraction at the CERN Proton Synchrotron”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 65-70. doi:10.18429/JACoW-HB2016-MOPR009
[n]	P. Fernandes, R. Parodi, and G. Sabbi, “The Extension of the OSCAR2D Code to Compute Azimuthally Dependent Modes of Axially Symmetric Cavities”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 366-369. 
[n]	G. A. Naylor, B. Joly, and D. Robinson, “Bremstrahlung Detection and Chamber Obstruction Localisation Using Scanning Radiation Detectors”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT002, pp. XX-XX. 
[n]	S. A. Kondrashev, J.-W. Kim, Y. K. Kwon, Y. H. Park, and H. J. Son, “EBIS Charge Breeder for RAON Facility”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 696-699. doi:10.18429/JACoW-NAPAC2016-WEPOA05
[n]	M. Droba, O. K. Kester, O. Meusel, and C. Wiesner, “De-neutralization of Laser Produced Proton Pulse in a Strong Solenoidal Magnetic Field”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP016, pp. 2755-2757. 
[n]	E. Matias et al., “Remote Access to the Canadian Light Source”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEX02, pp. 143-144. 
[n]	F. M. Esser et al., “Development Work for a Short Curved Superconducting Dipole Magnet for the HESR at FAIR”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD011, pp. 2425-2427. 
[n]	T. Lensch, D. Lipka, Re. Neumann, and M. Werner, “Comparison of Different Bunch Charge Monitors Used at the ARES Accelerator at DESY”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 169-173. doi:10.18429/JACoW-IBIC2023-TU3I04
[n]	S. G. Arutunian, N. M. Dobrovolski, M. R. Mailian, I. G. Sinenko, and I. E. Vasiniuk, “Vibrating Wire Scanner for Beam Profile Monitoring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA97, pp. 2105-2107. 
[n]	J.-L. Boutes and P. Maccioni, “Industrial Production of SC RF Accelerating Cavities at CERCA”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F10, pp. 587-588. 
[n]	G. Balbinot, J. Bosser, M. Caldara, L. Lanzavecchia, A. Parravicini, and M. Pullia, “A ``Not-Interceptive'' Faraday Cup in the CNAO Low Energy Injection Lines”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD21, pp. 339-341. 
[n]	M. W. Froese et al., “Cryogenic Ion Beam Storage”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP041, pp. 4860-4862. 
[n]	T. Katayama, I. N. Meshkov, and G. V. Trubnikov, “Numerical Investigation of Stochastic Cooling at NICA Collider”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper TUIOB01, pp. 52-57. 
[n]	A. F. Jacob, W. Barry, and G. R. Lambertson, “Higher Order Mode Damping in an ALS Test Cavity”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 928-931. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search