JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. Harrison et al., “First Steps Towards a Single-Shot Longitudinal Profile Monitor: Study of the Properties of Coherent Smith-Purcell Radiation Using the Surface Current Model”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 340-343. doi:10.18429/JACoW-IPAC2016-MOPMR040
[n]	F. Ludwig et al., “Drift Calibration Techniques for Future FELs”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA041, pp. 1419-1421. 
[n]	B. C. Kuske and M. McAteer, “Adjusting BERLinPro Optics to Commissioning Needs”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 165-170. doi:10.18429/JACoW-ERL2019-FRCOXBS05
[n]	A. Santamar?¡a Garc?¡a et al., “Systematic Studies of Transverse Emittance Measurements Along the CERN PS Booster Cycle”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 806-809. doi:10.18429/JACoW-IPAC2018-TUPAF047
[n]	G. Sterbini, B. Dehning, S. S. Gilardoni, and A. Guerrero, “Beam-based Measurements of the CPS Wire Scanner Precision and Accuracy”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3674-3676. doi:10.18429/JACoW-IPAC2014-THPME173
[n]	A. N. Pham et al., “Design of a Compact All-Permanent Magnet ECR Ion Source Injector for ReA at MSU NSCL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4054-4056. doi:10.18429/JACoW-IPAC2015-THPF141
[n]	S. Hojo et al., “Present Status of Cyclotrons (NIRS-930, HM-18) at NIRS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT008, pp. 46-48. 
[n]	F. Gougnaud et al., “Slow Control for Micromegas and Drift Chambers”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP013, pp. XX-XX. 
[n]	H. Karadeniz and S. Sultansoy, “QCD Explorer Proposal: E-linac versus E-ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS056, pp. 673-675. 
[n]	P. J. Chou, C. H. Kuo, C.-C. Kuo, and M.-H. Wang, “Collective Effects in the Storage Ring of Taiwan Photon Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH062, pp. 2928-2930. 
[n]	A. D. Palczewski, R. L. Geng, and C. E. Reece, “Analysis of New High-Q0 SRF Cavity Tests by Nitrogen Gas Doping at Jefferson Lab”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP138, pp. 736-739. 
[n]	O. Etisken, F. Antoniou, A. De Santis, C. Milardi, and F. Zimmermann, “Collective Effects Estimates for the Damping Ring Design of the FCC-ee”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2435-2438. doi:10.18429/JACoW-IPAC2022-THPOST003
[n]	M. J. Yang, “Lattice Function Measurement with TBT BPM Data”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ20, pp. 2500-2502. 
[n]	T. Momose, H. Ishimaru, K. Kanazawa, H. Mizuno, K. Narushima, and H. Watanabe, “Operational Characteristics of the TRISTAN Accumulation Ring Vacuum System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3809-3812. 
[n]	M. Krishnan et al., “Energetic Condensation Growth of Nb Thin-films”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUIOB01, pp. 309-318. 
[n]	C. Y. Yoshikawa et al., “Design and Simulation of a Matching System into the Helical Cooling Channel”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1382-1385. doi:10.18429/JACoW-IPAC2014-TUPME017
[n]	K. Hanke et al., “Status of the LIU Project at CERN”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3397-3399. doi:10.18429/JACoW-IPAC2014-THPME070
[n]	P. Gerhard, W. Barth, L. A. Dahl, A. Schempp, and K. Tinschert, “Status of the Unilac-upgrade Programme for the Heavy Element Research at GSI-Ship”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP021, pp. 3416-3418. 
[n]	G. Horikoshi, T. Kubo, H. Mizuno, K. Satoh, and H. Watanabe, “Vacuum System for the KEK Proton Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1290-1293. 
[n]	F. Furuta et al., “Experimental Comparison at KEK of High Gradient Performance of Different Single Cell Superconducting Cavity Designs”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS084, pp. 750-752. 
[n]	Z. H. Bai et al., “Initial Lattice Design for Hefei Advanced Light Source: A VUV and Soft X-ray Diffraction-limited Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2889-2891. doi:10.18429/JACoW-IPAC2016-WEPOW027
[n]	R. Bracco, B. Diviacco, D. Millo, R. P. Walker, M. Zalateu, and D. Zangrando, “Development of Elliptical Undulators for ELETTRA”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B10, pp. 2322-2324. 
[n]	R. Xiang et al., “A Step Closer to the CW High Brilliant Beam with the ELBE SRF-Gun-II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1456-1458. doi:10.18429/JACoW-IPAC2015-TUPWA023
[n]	Y. Lee, V. Gandel, D. C. Kiselev, D. Reggiani, M. Seidel, and S. Teichmann, “Simulation based optimization of a collimator system at the PSI proton accelerator facilities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC088, pp. 4260-4262. 
[n]	S. B. van der Geer and M. J. de Loos, “Multi-objective Genetic Optimization with the General Particle Tracer (GPT) Code”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 492-494. doi:10.18429/JACoW-IPAC2015-MOPJE076
[n]	C. D. Nantista, V. A. Dolgashev, and S. G. Tantawi, “Novel Accelerator Structure Couplers”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB036, pp. 1276-1278. 
[n]	K. Oide, “Overview of High Energy e+e- Factories”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 1-3. doi:10.18429/JACoW-eeFACT2016-MOOTH1
[n]	L. Serafini et al., “Electron Linac Optimization for Driving Bright Gamma-ray Sources based on Compton Back-scattering”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPO008, pp. 1461-1463. 
[n]	A. V. Zlobin, Y. I. Alexahin, V. V. Kapin, V. V. Kashikhin, N. V. Mokhov, and I. S. Tropin, “Preliminary Design of a Higgs Factory +- Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI061, pp. 1487-1489. 
[n]	S. S. Gilardoni and M. Giovannozzi, “First Observations of Intensity-dependent Effects for Transversally Split Beams”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS016, pp. 631-633. 
[n]	V. Kain et al., “Origin of the Damage to the Internal High Energy Beam Dump in the CERN SPS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3927-3929. doi:10.18429/JACoW-IPAC2015-THPF096
[n]	H. T. Edwards et al., “Comparison of Buffered Chemical Polished and Electropolished 3.9 GHz Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO063, pp. 379-383. 
[n]	H. Ishimaru, Z. Igarashi, K. Muto, and S. Shibata, “Beam Profile Measurements for KEK 12 GeV Proton Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1821-1824. 
[n]	Ya. V. Shashkov, I. V. Konoplev, and N. Yu. Samarokov, “Electromagnetic Design of a Superconducting dual axis Spoke Cavity”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 94-97. doi:10.18429/JACoW-ERL2019-WEPNEC14
[n]	C. P. Stoll and F. Hug, “Beam Breakup Limit Estimations and Higher Order Mode Characterisation for MESA”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 134-137. doi:10.18429/JACoW-ERL2019-THCOWBS06
[n]	B. L. Bures et al., “X-ray Pole Figure Analysis on Fiber Textured Epitaxial Niobium Films for SRF Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO080, pp. 418-421. 
[n]	G. Ha et al., “Demonstration of Current Profile Shaping using Double Dog-Leg Emittance Exchange Beam Line at Argonne Wakefield Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1065-1066. doi:10.18429/JACoW-IPAC2016-TUOBB01
[n]	N. Banerjee et al., “Essential Instrumentation for the Characterization of ERL Beams”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 150-154. doi:10.18429/JACoW-ERL2019-FRCOWBS04

For LaTeX

Use Complete Form

For BibTeX

References

Back to search