Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Favourites
For Word
[n] Y. Z. Wu, “Beijing Tau-Charm Factory Design Study”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6B011, pp. 321-323.
[n] M.-H. Chang et al., “Status and upgrade of radio frequency system at Taiwan photon source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3615-3618. doi:10.18429/JACoW-IPAC2023-WEPM022
[n] J. T. M. Lyles, R. E. Bratton, M. S. Prokop, and D. Rees, “New Drift-Tube Linac RF Systems at LANSCE”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3680-3683. doi:10.18429/JACoW-IPAC2018-THPAL025
[n] M. Del Franco, A. Vannozzi, A. Selce, and L. Sabbatini, “3D printed beam correctors”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3908-3911. doi:10.18429/JACoW-IPAC2024-THPS70
[n] O. C. Dermois, A. G. Drentje, and H. W. Schreuder, “Recent Developments at the KVI Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABP-03, pp. 107-109.
[n] J. Li, B. Du, Q. K. Jia, and H. T. Li, “Calculation and Analysis of the Magnetic Field of a Transverse Gradient Undulator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1130-1132. doi:10.18429/JACoW-IPAC2016-TUPMB011
[n] S. griffet, A. Cherif, J. Kemppinen, H. Mainaud Durand, V. Rude, and G. Sterbini, “Strategy and Validation of Fiducialization for the Pre-alignment of CLIC Components”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD073, pp. 2693-2695.
[n] T. Mertens, T. Atkinson, F. Gl?Âckner, A. Jankowiak, M. Ries, and A. V. Tsakanian, “Impact of RF Coupler Kicks on Beam Dynamics in BESSY VSR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3182-3184. doi:10.18429/JACoW-IPAC2018-THPAF084
[n] Y.-T. Li et al., “The design of DC power bus bar for solid state power amplifier in NSRRC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3611-3612. doi:10.18429/JACoW-IPAC2023-WEPM020
[n] G. Li, D. Sai, A. Yibin, Z. Yingui, and W. Yong, “Permanent Magnet vs. Electromagnet Dipoles for Synchrotron Radiation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH005, pp. 3224-3226.
[n] Z. Yin, Y. Wu, and J. F. Zhang, “Design and Experiment of the BEPCII IR Conventional Dual Aperture Quadrupole”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper MPPT002, unpublished.
[n] J. Lorkiewicz, B. Dwersteg, A. Brinkmann, W. Moeller, D. Kostin, and M. Layalan, “Surface TiN Coating of TESLA Couplers at DESY as an Antimultipactor Remedy”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT002, pp. 448-452.
[n] E. T. Tulu, U. van Rienen, and A. Arnold, “3D MULTIPACTING STUDY FOR THE ROSSENDORF SRF GUN”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP040, pp. 991-994.
[n] E. N. Shaposhnikova, T. Bohl, and T. P. R. Linnecar, “Longitudinal Schottky Spectrum of the Peak Bunch Amplitude Signal”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP038, pp. 3531-3533.
[n] F.-T. Chung et al., “Design and Upgrade the Safety System for the SRF Electronic System at the Taiwan Photon Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 567-569. doi:10.18429/JACoW-IPAC2016-MOPMY032
[n] J. Egberts et al., “Design and Test of the LIPAc IPM”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUPG021, pp. 180-182.
[n] S. Hojo et al., “Present Status of Cyclotrons (NIRS-930, HM-18) at NIRS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT008, pp. 46-48.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Z. Wu, “Beijing Tau-Charm Factory Design Study”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6B011, pp. 321-323.
- M.-H. Chang et al., “Status and upgrade of radio frequency system at Taiwan photon source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM022, pp. 3615-3618.
- J. T. M. Lyles, R. E. Bratton, M. S. Prokop, and D. Rees, “New Drift-Tube Linac RF Systems at LANSCE”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3680-3683.
- M. Del Franco, A. Vannozzi, A. Selce, and L. Sabbatini, “3D printed beam correctors”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS70, pp. 3908-3911.
- O. C. Dermois, A. G. Drentje, and H. W. Schreuder, “Recent Developments at the KVI Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABP-03, pp. 107-109.
- J. Li, B. Du, Q. K. Jia, and H. T. Li, “Calculation and Analysis of the Magnetic Field of a Transverse Gradient Undulator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1130-1132.
- S. griffet, A. Cherif, J. Kemppinen, H. Mainaud Durand, V. Rude, and G. Sterbini, “Strategy and Validation of Fiducialization for the Pre-alignment of CLIC Components”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD073, pp. 2693-2695.
- T. Mertens, T. Atkinson, F. Gl?Âckner, A. Jankowiak, M. Ries, and A. V. Tsakanian, “Impact of RF Coupler Kicks on Beam Dynamics in BESSY VSR”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3182-3184.
- Y.-T. Li et al., “The design of DC power bus bar for solid state power amplifier in NSRRC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM020, pp. 3611-3612.
- G. Li, D. Sai, A. Yibin, Z. Yingui, and W. Yong, “Permanent Magnet vs. Electromagnet Dipoles for Synchrotron Radiation”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH005, pp. 3224-3226.
- Z. Yin, Y. Wu, and J. F. Zhang, “Design and Experiment of the BEPCII IR Conventional Dual Aperture Quadrupole”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT002, unpublished.
- J. Lorkiewicz, B. Dwersteg, A. Brinkmann, W. Moeller, D. Kostin, and M. Layalan, “Surface TiN Coating of TESLA Couplers at DESY as an Antimultipactor Remedy”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT002, pp. 448-452.
- E. T. Tulu, U. van Rienen, and A. Arnold, “3D MULTIPACTING STUDY FOR THE ROSSENDORF SRF GUN”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP040, pp. 991-994.
- E. N. Shaposhnikova, T. Bohl, and T. P. R. Linnecar, “Longitudinal Schottky Spectrum of the Peak Bunch Amplitude Signal”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP038, pp. 3531-3533.
- F.-T. Chung et al., “Design and Upgrade the Safety System for the SRF Electronic System at the Taiwan Photon Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 567-569.
- J. Egberts et al., “Design and Test of the LIPAc IPM”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper TUPG021, pp. 180-182.
- S. Hojo et al., “Present Status of Cyclotrons (NIRS-930, HM-18) at NIRS”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT008, pp. 46-48.
Back to search