Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Tanaka et al., “Single Bunch Acceleration and Detection in S-band Electron Linear Accelerator”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S5-11, pp. 319-323.
[n] F. H. Tseng et al., “Optics Calibration During Commissioning of the Taiwan Photon Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3357-3359. doi:10.18429/JACoW-IPAC2016-THPMB049
[n] K. Cassou et al., “PALLAS, a laser-plasma injector test facility, development status”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM124, unpublished.
[n] A. Milan-Otero et al., “Usage and Development of Web Services at MAX IV”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1826-1830. doi:10.18429/JACoW-ICALEPCS2017-THPHA170
[n] G. L. Xu, G. Lei, L. Wang, Y. L. Zhang, and P. Zhu, “CSNS Timing System Prototype”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS028, pp. 386-388.
[n] R. Jiang, F. Z. Chen, Z. C. Chen, and Y. B. Leng, “Identification of Faulty Beam Position Monitor Based Clustering by Fast Search and Find of Density Peaks”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 114-117. doi:10.18429/JACoW-IBIC2018-MOPC02
[n] B. Keil et al., “Status of The European XFEL Transverse Intra Bunch Train Feedback System”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 492-496. doi:10.18429/JACoW-IBIC2015-TUPB064
[n] T. Bato, G. Thomas, and F. Varela, “A Model-driven Generator to Automate the Creation of HMIs for the CERN Gas Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1801-1805. doi:10.18429/JACoW-ICALEPCS2017-THPHA163
[n] Y. Mori, Y. Ishi, Y. Kuriyama, A. Osanai, and T. Uesugi, “Study of Integer Betatron Resonance Crossing in Scaling FFAG Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP079, pp. 3889-3891.
[n] G. Kube et al., “A MTCA Based BPM-System for PETRA IV”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 19-23. doi:10.18429/JACoW-IBIC2023-MO3C04
[n] J. L. Steinmann et al., “Non-interferometric Spectral Analysis of Synchrotron Radiation in the THz regime at ANKA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1509-1511. doi:10.18429/JACoW-IPAC2015-TUPWA043
[n] D. Wang et al., “CEPC Parameter Choice”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 10-13. doi:10.18429/JACoW-SAP2017-MOBH3
[n] C. M. Cheng et al., “The Installation of TPS Booster Vacuum System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2390-2392. doi:10.18429/JACoW-IPAC2014-WEPME052
[n] A. N. Johnson et al., “EPICS 7 Core Status Report”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 924. doi:10.18429/JACoW-ICALEPCS2019-WECPR01
[n] M. E. Read, T. Bui, R. L. Ives, R. H. Jackson, I. A. Chernyavskiy, and H. Freund, “Development of a 402.5 MHz 140 kW Inductive Output Tube (IOT)”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP128, pp. 1070-1072.
[n] M. T. Crofford et al., “Initial Commissioning Experience with the Spallation Neutron Source Vertical Test Area RF System”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB093, pp. 819-822.
[n] K. Shinto et al., “CURRENT STATUS OF A STRETCHER-BOOSTER RING AT TOHOKU UNIVERSITY”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP002, pp. XX-XX.
[n] D. Wang, J. Gao, and Y. Wang, “A New Design for ILC 3.2 km Damping Ring Based on FODO Cell”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE088, pp. 3551-3553.
[n] A. L. Vikharev et al., “100 MW Active X-BAND Pulse Compressor”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA169, pp. 1474-1476.
[n] L. Ives, J. Neilson, and W. Vogler, “CASCADE - An Advanced Computational Tool for Waveguide Component and Window Design”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPB003, pp. 269-271.
[n] J. Breunlin and ?à. Andersson, “Emittance Diagnostics at the Max Iv 3 Gev Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2908-2910. doi:10.18429/JACoW-IPAC2016-WEPOW034
[n] R. Karban, N. Kornweibel, D. L. Dvorak, M. D. Ingham, and D. A. Wagner, “Towards a State Based Control Architecture for Large Telescopes: Laying a Foundation at the VLT”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRBHMULT04, pp. 1330-1333.
[n] S. Lee, E.-S. Kim, and I. Shin, “Design of RF Power Coupler for RISP Half Wave Resonator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2208-2210. doi:10.18429/JACoW-IPAC2016-WEPMB041
[n] J. R. Delayen, B. J. Micklich, C. L. Bohn, C. T. Roche, and L. Sagalovsky, “Design Considerations for High-Current Superconducting Ion Linacs”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1715-1718.
[n] J. Liu, J. Buck, F. Dietrich, W. Freund, J. Gr??nert, and M. Meyer, “X-ray Photon Temporal Diagnostics for the European XFEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP014, pp. 45-46.
[n] J. Pflueger, “Undulator Systems and Photon Dignostic Plans for the European XFEL Project”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUOC002, pp. XX-XX.
[n] T. Thuillier, “Electron Cyclotron Resonance Source Development”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU1PB02, pp. 130-133.
[n] A. Beckmann, S. Karabekyan, and J. Pflueger, “A Flexible and Testable Software Architecture: Applying Presenter First to a Device Server for the DOOCS Accelerator Control System of the European XFEL”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THCD05, pp. 131-133.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Tanaka et al., “Single Bunch Acceleration and Detection in S-band Electron Linear Accelerator”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S5-11, pp. 319-323.
- F. H. Tseng et al., “Optics Calibration During Commissioning of the Taiwan Photon Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3357-3359.
- K. Cassou et al., “PALLAS, a laser-plasma injector test facility, development status”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM124, unpublished.
- A. Milan-Otero et al., “Usage and Development of Web Services at MAX IV”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1826-1830.
- G. L. Xu, G. Lei, L. Wang, Y. L. Zhang, and P. Zhu, “CSNS Timing System Prototype”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS028, pp. 386-388.
- R. Jiang, F. Z. Chen, Z. C. Chen, and Y. B. Leng, “Identification of Faulty Beam Position Monitor Based Clustering by Fast Search and Find of Density Peaks”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 114-117.
- B. Keil et al., “Status of The European XFEL Transverse Intra Bunch Train Feedback System”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 492-496.
- T. Bato, G. Thomas, and F. Varela, “A Model-driven Generator to Automate the Creation of HMIs for the CERN Gas Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1801-1805.
- Y. Mori, Y. Ishi, Y. Kuriyama, A. Osanai, and T. Uesugi, “Study of Integer Betatron Resonance Crossing in Scaling FFAG Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP079, pp. 3889-3891.
- G. Kube et al., “A MTCA Based BPM-System for PETRA IV”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MO3C04, pp. 19-23.
- J. L. Steinmann et al., “Non-interferometric Spectral Analysis of Synchrotron Radiation in the THz regime at ANKA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1509-1511.
- D. Wang et al., “CEPC Parameter Choice”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 10-13.
- C. M. Cheng et al., “The Installation of TPS Booster Vacuum System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2390-2392.
- A. N. Johnson et al., “EPICS 7 Core Status Report”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 924.
- M. E. Read, T. Bui, R. L. Ives, R. H. Jackson, I. A. Chernyavskiy, and H. Freund, “Development of a 402.5 MHz 140 kW Inductive Output Tube (IOT)”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP128, pp. 1070-1072.
- M. T. Crofford et al., “Initial Commissioning Experience with the Spallation Neutron Source Vertical Test Area RF System”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB093, pp. 819-822.
- K. Shinto et al., “CURRENT STATUS OF A STRETCHER-BOOSTER RING AT TOHOKU UNIVERSITY”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP002, pp. XX-XX.
- D. Wang, J. Gao, and Y. Wang, “A New Design for ILC 3.2 km Damping Ring Based on FODO Cell”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE088, pp. 3551-3553.
- A. L. Vikharev et al., “100 MW Active X-BAND Pulse Compressor”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA169, pp. 1474-1476.
- L. Ives, J. Neilson, and W. Vogler, “CASCADE - An Advanced Computational Tool for Waveguide Component and Window Design”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPB003, pp. 269-271.
- J. Breunlin and ?à. Andersson, “Emittance Diagnostics at the Max Iv 3 Gev Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2908-2910.
- R. Karban, N. Kornweibel, D. L. Dvorak, M. D. Ingham, and D. A. Wagner, “Towards a State Based Control Architecture for Large Telescopes: Laying a Foundation at the VLT”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRBHMULT04, pp. 1330-1333.
- S. Lee, E.-S. Kim, and I. Shin, “Design of RF Power Coupler for RISP Half Wave Resonator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2208-2210.
- J. R. Delayen, B. J. Micklich, C. L. Bohn, C. T. Roche, and L. Sagalovsky, “Design Considerations for High-Current Superconducting Ion Linacs”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1715-1718.
- J. Liu, J. Buck, F. Dietrich, W. Freund, J. Gr??nert, and M. Meyer, “X-ray Photon Temporal Diagnostics for the European XFEL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP014, pp. 45-46.
- J. Pflueger, “Undulator Systems and Photon Dignostic Plans for the European XFEL Project”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUOC002, pp. XX-XX.
- T. Thuillier, “Electron Cyclotron Resonance Source Development”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TU1PB02, pp. 130-133.
- A. Beckmann, S. Karabekyan, and J. Pflueger, “A Flexible and Testable Software Architecture: Applying Presenter First to a Device Server for the DOOCS Accelerator Control System of the European XFEL”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THCD05, pp. 131-133.
Back to search