Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Fahmie, “Design of the Advanced Light Source Timing System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1869-1872.
[n] L. M. Russo et al., “Gateware and Software for ALS-U Instrumentation”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1536-1541. doi:10.18429/JACoW-ICALEPCS2023-THPDP080
[n] J. Kang et al., “Design Study of the 30 MeV Cyclotron Magnet”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS078, pp. 2559-2561.
[n] V. Kamerdzhiev et al., “Concluding the operation and development of COSY”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1653-1656. doi:10.18429/JACoW-IPAC2024-TUPS10
[n] C. D. Moore, J. Firebaugh, P. Lucas, and P. Prieto, “Status of Resonant Extraction from the Fermilab Main Injector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA73, pp. 1246-1248.
[n] G. A. Karamysheva and Yu. N. Denisov, “Complex ``ALFA'' After 10 Years of Operation on Track Membranes Production”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2212-2214. doi:10.18429/JACoW-IPAC2014-WEPRO106
[n] R. H. A. Farias et al., “The LNLS 500 MeV Booster Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B18, pp. 705-707.
[n] J. R. Sauer, M. Fotino, R. H. Milburn, and C. K. Sinclair, “A Laser Induced Compton Back-Scattered Photon Beam at the Cambridge Electron Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1069-1073.
[n] K.-Y. Ng, “Optimized Wakefield Computations Using a Network Model”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOE05, pp. 275-277.
[n] J. Campmany, D. Einfeld, J. Marcos, and V. Massana, “General description of IDs initially installed at ALBA”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA055, pp. 2609-2611.
[n] R. Kazimi, J. Grames, A. Hofler, C. Hernandez-Garcia, and G. Palacios Serrano, “Polarized electron injector for positron production at CEBAF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2727-2730. doi:10.18429/JACoW-IPAC2023-WEPA035
[n] K. R. L. Baker, I. D. Finch, and M. Romanovschi, “Maintaining a Hybrid Control System at ISIS with a Vsystem/EPICS Bridge”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 986-992. doi:10.18429/JACoW-ICALEPCS2023-WE2BCO04
[n] W. H. Tan, P. Piot, and A. Zholents, “Start-to-End Simulation of the Drive-Beam Longitudinal Dynamics for Beam-Driven Wakefield Acceleration”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 858-861. doi:10.18429/JACoW-NAPAC2019-WEPLO06
[n] L. Philippe, P. Gillette, and G. Normand, “User Interfaces for the Spiral2 Machine Protection System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC102, pp. 818-821.
[n] B. Kalantari and T. Korhonen, “New Features of the SLS Timing System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP543, pp. XX-XX.
[n] C. P. Stoll, F. Hug, and D. Simon, “Beam Break Up Simulations for the MESA Accelerator”, in Proc. ERL'17, Geneva, Switzerland, Jun. 2017, pp. 26-28. doi:10.18429/JACoW-ERL2017-MOPSPP009
[n] J. A. Martin, “Conference Summary”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper H-01, pp. 1863-1863.
[n] Z. Huang, J. N. Galayda, and P. A. Heimann, “Technical Challenges in the Linac Coherent Light Source, Commissioning and Upgrades”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOBS1, pp. 724-728.
[n] J. L. Belmont, J. M. De Conto, A. Fontenille, G. Hadinger, M. Laamyem, and R. Meunier, “An Experimental Method of Aberration Correction for High Resolution Mass Spectrometers”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP05D, pp. 2312-2314.
[n] D. Winklehner, J. M. Conrad, D. Koser, J. Smolsky, and L. H. Waites, “High-Current H?? Beams from a Compact Cyclotron using RFQ Direct Injection”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1301-1304. doi:10.18429/JACoW-IPAC2021-TUXB07
[n] A. S. Romanenko, “Superconducting Cavities for Quantum Computers”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper FRCHC1, unpublished.
[n] W. Mexner, E. Iurchenko, H. Pasic, D. Ressmann, and T. Spangenberg, “A New Flexible Integration of NeXus Datasets to ANKA by Fuse File Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC008, pp. 566-569.
[n] A. Wolski, “A New Lattice Design for the NLC Positron Pre-damping Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI030, pp. 521-523.
[n] V. V. Tarnetsky, V. Auslender, I. Makarov, and M. A. Tiunov, “Numerical Study of Coupling Slot Effects on Beam Dynamics in Industrial Accelerator Prototype”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT019, pp. 1622-1624.
[n] M. Venturini, R. A. Kishek, and M. Reiser, “The Problem of Dispersion Matching in Space Charge Dominated Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP134, pp. 3274-3276.
[n] S. Tariq, K. Ammigan, P. Hurh, P. Liu, R. Schultz, and J. Shang, “Li Material Testing- Fermilab Antiproton Source Lithium Collection Lens”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG013, pp. 1452-1454.
[n] E. J. Wall?®n, K. I. Blomqvist, B. N. Jensen, and U. Johansson, “Insertion Devices for the MAX IV Light Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS137, pp. 3607-3609.
[n] A.-S. M??ller and J. Wenninger, “Observation of Non-linear Effects in the Synchrotron Tune at LEP”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI006, pp. 419-421.
[n] J. M. Filhol, P. Berkvens, and J. F. Bouteille, “General Description of the ESRF Injector System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 332-335.
[n] G. Tosin et al., “Conceptual Design of an EPU for VUV Radiation Production at LNLS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH133, pp. 3110-3112.
[n] B. M. Moftah, S. Aldelaijan, F. M. Alrumayan, F. Alzorkani, S. Devic, and M. Shehadeh, “Characterization of the CS30 Cyclotron at KFSH&RC for Radiotherapy Applications”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPSH008, pp. 400-402.
[n] M. Awschalom, G. M. Lee, M. L. Palmer, and D. E. Young, “The Fermilab Neutron Radiotherapy Facility”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1055-1058.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Fahmie, “Design of the Advanced Light Source Timing System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1869-1872.
- L. M. Russo et al., “Gateware and Software for ALS-U Instrumentation”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP080, pp. 1536-1541.
- J. Kang et al., “Design Study of the 30 MeV Cyclotron Magnet”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS078, pp. 2559-2561.
- V. Kamerdzhiev et al., “Concluding the operation and development of COSY”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS10, pp. 1653-1656.
- C. D. Moore, J. Firebaugh, P. Lucas, and P. Prieto, “Status of Resonant Extraction from the Fermilab Main Injector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA73, pp. 1246-1248.
- G. A. Karamysheva and Yu. N. Denisov, “Complex ``ALFA'' After 10 Years of Operation on Track Membranes Production”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2212-2214.
- R. H. A. Farias et al., “The LNLS 500 MeV Booster Synchrotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2B18, pp. 705-707.
- J. R. Sauer, M. Fotino, R. H. Milburn, and C. K. Sinclair, “A Laser Induced Compton Back-Scattered Photon Beam at the Cambridge Electron Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1069-1073.
- K.-Y. Ng, “Optimized Wakefield Computations Using a Network Model”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOE05, pp. 275-277.
- J. Campmany, D. Einfeld, J. Marcos, and V. Massana, “General description of IDs initially installed at ALBA”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA055, pp. 2609-2611.
- R. Kazimi, J. Grames, A. Hofler, C. Hernandez-Garcia, and G. Palacios Serrano, “Polarized electron injector for positron production at CEBAF”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA035, pp. 2727-2730.
- K. R. L. Baker, I. D. Finch, and M. Romanovschi, “Maintaining a Hybrid Control System at ISIS with a Vsystem/EPICS Bridge”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper WE2BCO04, pp. 986-992.
- W. H. Tan, P. Piot, and A. Zholents, “Start-to-End Simulation of the Drive-Beam Longitudinal Dynamics for Beam-Driven Wakefield Acceleration”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 858-861.
- L. Philippe, P. Gillette, and G. Normand, “User Interfaces for the Spiral2 Machine Protection System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC102, pp. 818-821.
- B. Kalantari and T. Korhonen, “New Features of the SLS Timing System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP543, pp. XX-XX.
- C. P. Stoll, F. Hug, and D. Simon, “Beam Break Up Simulations for the MESA Accelerator”, in Proc. 59th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'17), Geneva, Switzerland, Jun. 2017, pp. 26-28.
- J. A. Martin, “Conference Summary”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper H-01, pp. 1863-1863.
- Z. Huang, J. N. Galayda, and P. A. Heimann, “Technical Challenges in the Linac Coherent Light Source, Commissioning and Upgrades”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOBS1, pp. 724-728.
- J. L. Belmont, J. M. De Conto, A. Fontenille, G. Hadinger, M. Laamyem, and R. Meunier, “An Experimental Method of Aberration Correction for High Resolution Mass Spectrometers”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP05D, pp. 2312-2314.
- D. Winklehner, J. M. Conrad, D. Koser, J. Smolsky, and L. H. Waites, “High-Current H?? Beams from a Compact Cyclotron using RFQ Direct Injection”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1301-1304.
- A. S. Romanenko, “Superconducting Cavities for Quantum Computers”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper FRCHC1, unpublished.
- W. Mexner, E. Iurchenko, H. Pasic, D. Ressmann, and T. Spangenberg, “A New Flexible Integration of NeXus Datasets to ANKA by Fuse File Systems”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC008, pp. 566-569.
- A. Wolski, “A New Lattice Design for the NLC Positron Pre-damping Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI030, pp. 521-523.
- V. V. Tarnetsky, V. Auslender, I. Makarov, and M. A. Tiunov, “Numerical Study of Coupling Slot Effects on Beam Dynamics in Industrial Accelerator Prototype”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT019, pp. 1622-1624.
- M. Venturini, R. A. Kishek, and M. Reiser, “The Problem of Dispersion Matching in Space Charge Dominated Beams”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP134, pp. 3274-3276.
- S. Tariq, K. Ammigan, P. Hurh, P. Liu, R. Schultz, and J. Shang, “Li Material Testing- Fermilab Antiproton Source Lithium Collection Lens”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG013, pp. 1452-1454.
- E. J. Wall?®n, K. I. Blomqvist, B. N. Jensen, and U. Johansson, “Insertion Devices for the MAX IV Light Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS137, pp. 3607-3609.
- A.-S. M??ller and J. Wenninger, “Observation of Non-linear Effects in the Synchrotron Tune at LEP”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI006, pp. 419-421.
- J. M. Filhol, P. Berkvens, and J. F. Bouteille, “General Description of the ESRF Injector System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 332-335.
- G. Tosin et al., “Conceptual Design of an EPU for VUV Radiation Production at LNLS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH133, pp. 3110-3112.
- B. M. Moftah, S. Aldelaijan, F. M. Alrumayan, F. Alzorkani, S. Devic, and M. Shehadeh, “Characterization of the CS30 Cyclotron at KFSH&RC for Radiotherapy Applications”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPSH008, pp. 400-402.
- M. Awschalom, G. M. Lee, M. L. Palmer, and D. E. Young, “The Fermilab Neutron Radiotherapy Facility”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1055-1058.
Back to search