JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. Kisiel et al., “Performance of the Beam Position Monitor System in Solaris Synchrotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 432-434. doi:10.18429/JACoW-IPAC2016-MOPMW017
[n]	Q. Jin et al., “The Commission of a 2MeV X-Band SW Accelerating Guide”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D039, pp. 178-180. 
[n]	D. Anderson et al., “RF Power Source Development at the RTA Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP071L, pp. 2149-2151. 
[n]	C. Prados, J. N. Bai, A. Hahn, and A. Suresh, “A Reliable White Rabbit Network for the FAIR General Timing Machine”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 627-632. doi:10.18429/JACoW-ICALEPCS2017-TUPHA091
[n]	M. K. Craddock et al., “The TRIUMF Kaon Factory”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1707-1710. 
[n]	K. L. Erdman, K. H. Brackhaus, and R. H. M. Gummer, “Some Aspects of the Control and Stabilization of the RF Accelerating Voltage in the TRIUMF Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 444-451. 
[n]	S. C. Duarte Pinto and J. Spanggaard, “Gas Electron Multipliers Versus Multi Wire Proportional Chambers”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUCL3, pp. 342-345. 
[n]	K. N. Sanosyan, M. Aghasyan, R. H. Mikaelyan, and V. M. Vartanian, “Shielding Design Study for CANDLE Facility”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT002, pp. 1816-1818. 
[n]	J. Egberts et al., “Detailed Experimental Characterization of an Ionization Profile Monitor”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper WEOA03, pp. 547-549. 
[n]	T. Obina, K. Harada, and R. Takai, “Fast Orbit Stabilization System for Tandem APPLE-II Undulators at the KEK-PF”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD73, pp. 479-481. 
[n]	L. Perrot, P. Blache, and S. Rousselot, “The DESIR Facility at GANIL-SPIRAL2: The Transfer Beam Lines”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 179-183. doi:10.18429/JACoW-HB2016-MOPL002
[n]	S. Mallon Amerigo, P. Martel, S. Petit, and D. Widegren, “CERN's Global Equipment Data Repository”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUB004, pp. 72-74. 
[n]	G. Gelato, L. Magnani, N. Rasmussen, H. Schoenauer, and K. Schindl, “Progress in Space-Charge Limited Machines: Four Times the Design Intensity in the CERN Proton Synchrotron Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1298-1301. 
[n]	B. Walasek-Hoehne and G. Kube, “Scintillating Screen Applications in Beam Diagnostics”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper WEOB01, pp. 553-557. 
[n]	H. H. Yan et al., “A Design of Switch Magnet Power Supply”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP107, pp. 266-268. 
[n]	M. Piekarski, W. T. Kitka, and J. Jaworek-Korjakowska, “Deep Neural Network for Anomaly Detection in Accelerators”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1379. doi:10.18429/JACoW-ICALEPCS2019-WEPHA121
[n]	M. Olivo, U. Rohrer, and E. Steiner, “An Electrostatic Beam Splitter for the SIN 590 MeV Proton Beam Line”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3094-3097. 
[n]	S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 280-284. doi:10.18429/JACoW-ICALEPCS2017-TUDPL01
[n]	S. Yu, “Review of New Developments in the Field of Induction Accelerators (Electrons and Ions)”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TH103, pp. 597-604. 
[n]	A. Ando, A. Araki, K. Endo, T. Igarashi, T. Kasuga, and M. Kihara, “Beam Lifetime in the Initial Operation of KEK Main Ring”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1530-1533. 
[n]	B. H. Hong et al., “KIRAMS-13 Target for [18F]Fluoride Production”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99909, pp. XX-XX. 
[n]	C. S. Park, J. F. Amundson, J. A. Johnstone, V. P. Nagaslaev, and S. J. Werkema, “Space Charge Effect of the High Intensity Proton Beam during the Resonance Extraction for the MU2E Experiment at Fermilab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP092, pp. 1645-1647. 
[n]	P. Sagalo et al., “The State Machine for the Accelerator System Working in the National Synchrotron Radiation Centre Solaris”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 706-708. doi:10.18429/JACoW-ICALEPCS2017-TUPHA126
[n]	M. Ostoja-Gajewski, “IT Infrastructure Tips and Tricks for Control System and PLC”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1158-1161. doi:10.18429/JACoW-ICALEPCS2017-THBPA05
[n]	W. R. Rawnsley, G. H. Mackenzie, and T. C. Ries, “A Scanning Secondary Emission Profile Monitor”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 553-556. 
[n]	F. Havart, D. Chapuis, R. Nunes, and D. Vaxelaire, “Achieving a Highly Configurable Personnel Protection System for Experimental Areas”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC061, pp. 238-241. 
[n]	A. Araki, Y. Kamiya, M. Katoh, and M. Kihara, “Measurement of Betatron Function at the Photon Factory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1272-1275. 
[n]	J. R. Alonso, “Status Report on the Spallation Neutron Source SNS Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP03F, pp. 493-495. 
[n]	W. H. Hwang et al., “UPGRADE OF LOW LEVEL RF FEEDBACK SYSTEM FOR PLS STORAGE RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP075, pp. XX-XX. 
[n]	L. Ahrens et al., “SNS Ring Study at the AGS Booster”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B16, pp. 987-992. 
[n]	E. J. Lee, M. G. Hur, and Y. B. Kong, “Test Production of Ti-44 using RFT-30 Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 108-109. doi:10.18429/JACoW-Cyclotrons2016-MOP21
[n]	P. F. Rohwer and S. Schneider, “Beam Injection and Extraction for the Separated-Sector Cyclotron of the National Accelerator Centre”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-28, pp. 481-483. 
[n]	T. L. Benyo, A. Chait, L. P. Forsley, M. Pines, V. Pines, and B. M. Steinetz, “Evidence of the Electron-Screened Oppenheimer Philips Reactions 162Er(d,n)163Tm or 162Er(p,)163Tm in Deuterated Materials Subjected to a Low-Energy Photon Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 533-536. doi:10.18429/JACoW-IPAC2018-MOPML056
[n]	P. Celliers et al., “Proposed New Facilities for Proton Therapy at iThemba LABS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI085, pp. 560-562. 
[n]	T. G. Lee, Y. U. Nam, and M. K. Park, “New Development of EPICS-based Data Acquisition System for Millimeter-wave Interferometer in KSTAR Tokamak”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUCAUST05, pp. 577-580. 
[n]	T. Noll and F. Radu, “The Mechanics of the Vekmag Experiment”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 370-373. doi:10.18429/JACoW-MEDSI2016-WEPE38
[n]	I. S. Park et al., “Fabrication of ICHIRO Nine-cell Cavities in PAL for STF of KEK”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN060, pp. 2173-2175. 
[n]	R. Bourtembourg et al., “TANGO Kernel Development Status”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 27-33. doi:10.18429/JACoW-ICALEPCS2017-MOBPL02
[n]	R. L. Geng et al., “RD on the Niobium-Copper Superconducting Cavity at Peking University”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOP013, pp. 70-73. 
[n]	G. Stinson and P. Bricault, “A Proposal for an Additional Beamline to the TRIUMF ISAC Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB024, pp. 1670-1672. 
[n]	M. Yoon, J. Choi, G. H. Kim, and T. Lee, “Injection Dynamics of the Pohang Light Source Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1466-1469. 
[n]	D. C. Zhu, J. S. Cao, Y. F. Sui, and J. H. Yue, “Beam Size Measurement and PSF Evaluate of KB Mirror Monitor at SSRF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2151-2154. doi:10.18429/JACoW-IPAC2018-WEPAL005
[n]	I. J. Kim, S. M. Choi, M. G. Hur, S. W. Kim, J. H. Park, and S. D. Yang, “The Solid Target Control System for the RFT-30 30 MeV Cyclotron in KAERI”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA071, pp. 241-243. 
[n]	A. Latina, P. Eliasson, and D. Schulte, “Bunch Compressor for Beam-Based Alignment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN061, pp. 2844-2846. 
[n]	A. Blas, R. Cappi, R. Garoby, S. Hancock, K. Schindl, and J. L. Vallet, “Beams in the CERN PS Complex after the RF Upgrades for LHC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP06H, pp. 505-507. 
[n]	N. S. Saotome et al., “Development of QA System for the Rotating Gantry for Carbon Ion Therapy at NIRS”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 66-69. doi:10.18429/JACoW-IBIC2015-MOPB016
[n]	Z. B. du Toit et al., “Progress with the NAC Injector Cyclotron for Heavy and Polarized Ions”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VIII-15, pp. 361-364. 
[n]	J. L. Conradie et al., “New Developments at iThemba LABS”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 274-277. doi:10.18429/JACoW-Cyclotrons2016-THA02
[n]	J. L. Conradie et al., “New Priorities and Developments at NAC”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-05, pp. XX-XX. 
[n]	U. Bechstedt et al., “Injection and Extraction Magnets of COSY-Juelich”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1257-1260. 
[n]	In Soo Ko, “Status of Pohang Light Source”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4C004, pp. 59-63. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search