JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	K. A. Brown et al., “Status of Slow Extraction of High Intensity Protons from Brookhaven's AGS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE003, pp. 1545-1547. 
[n]	G. K. Sahoo, K. Balewski, H. Ehrlichmann, J. Keil, and R. Wanzenberg, “Dispersion and Beam Optic Parameter Measurements in the Transport Line (E-Weg) from DESY II to PETRA III”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 692-694. doi:10.18429/JACoW-IPAC2017-MOPIK071
[n]	I. V. Bazarov, L. Cultrera, C. M. Gulliford, H. Lee, H. K. Fung, and J. M. Maxson, “Single Photoemitter Tips in a DC Gun: Limiting Aberration-induced Emittance”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1622-1625. doi:10.18429/JACoW-IPAC2017-TUPAB128
[n]	A. Kurtulus et al., “Detailed Electromagnetic Characterisation of HL-LHC Low Impedance Collimators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4258-4261. doi:10.18429/JACoW-IPAC2021-THPAB235
[n]	M. A. Nozdrin et al., “Hollow Photocathode Concept for E-gun”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA011, pp. 59-61. 
[n]	L.-H. Yu et al., “Short Rayleigh Range Free Electron Laser Amplifiers”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP044, pp. XX-XX. 
[n]	J. D. Gilpatrick, H. Marquez, J. Power, and V. Yuan, “Design and Operation of a Bunched-Beam, Phase-Spread Measurement”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-23, pp. 359-361. 
[n]	Z. Zheng, J. T. Popielarski, K. Saito, and T. Xu, “Cost Reduction for FRIB Magnetic Shielding”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 818-820. doi:10.18429/JACoW-LINAC2016-THPRC023
[n]	N. A. Moody et al., “First Operation of the LANL/AES Normal Conducting Radio Frequency Photoinjector”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP202, pp. 2498-2500. 
[n]	P. V. Tyagi et al., “Effect of Current Densities on Sulfur Generation at Electropolished Niobium Surface”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC092, pp. 292-294. 
[n]	G. Shu, Y. Chen, S. Lal, H. J. Qian, H. Shaker, and F. Stephan, “Multiphysics Analysis of a CW VHF Gun for European XFEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 456-459. doi:10.18429/JACoW-FEL2019-WEP055
[n]	J. Herrera, R. Hogue, A. Prodell, P. Thompson, P. Wanderer, and E. Willen, “Random Errors in the Magnetic Field Coefficients of Superconducting Quadrupole Magnets”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1477-1480. 
[n]	T. Naito et al., “Damping Wiggler Study at KEK-ATF”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE044, pp. 2809-2811. 
[n]	M. Bieler et al., “Hollow Beam Gun for the Wake Field Transformer Experiement at DESY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 967-970. 
[n]	O. Yavas, H.-H. Braun, R. Corsini, and S. Sultansoy, “CLIC Drive Beam and LHC Based FEL-Nucleus Collider”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT097, pp. 4320-4322. 
[n]	V. Forte, J. L. Abelleira, E. Benedetto, C. Bracco, M. Cieslak-Kowalska, and G. P. Di Giovanni, “3D Emittances Tailoring Techniques and Optimization with Space Charge for the Future CERN PS Booster Operations with Linac4”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 660-663. doi:10.18429/JACoW-IPAC2016-MOPOR025
[n]	M. E. S?â, G. Kotzian, M. Ojeda Sandon?â, and D. Valuch, “Online Bunch by Bunch Transverse Instability Detection in LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 397-399. doi:10.18429/JACoW-IPAC2017-MOPAB117
[n]	M. C. Ross, “Industrialization of the ILC Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEIB202, pp. 2105-2109. 
[n]	B. Giaccone, M. Martinello, and J. Zasadzinski, “Study of the Niobium Oxide Structure and Microscopic Effect of Plasma Processing on the Niobium Surface”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 585. doi:10.18429/JACoW-SRF2021-WEPCAV001
[n]	M. A. Nozdrin, N. Balalykin, V. Minashkin, V. Y. Schegolev, G. Shirkov, and G. V. Trubnikov, “Progress of the JINR e-Linac Accelerator Test-Bench Control Systems”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD32, pp. 203-205. 
[n]	H. Oguri, “High Intensity Negative Hydrogen Ion Sources”, in Proc. IPAC'20, Caen, France, May 2020, paper TUXPLM01, pp. XX-XX. 
[n]	V. M. Panasyuk, M. I. Bryzgunov, A. V. Bubley, V. V. Parkhomchuk, and V. B. Reva, “Matching of Magnetic Field with Energy of Electrons in 2 MeV COSY Cooler”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO07, pp. 110-112. 
[n]	M. Lonza et al., “The Control System of the FERMI@Elettra Free Electron Laser”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP105, pp. 322-324. 
[n]	I. S. Park et al., “Fabrication of ICHIRO Nine-cell Cavities in PAL for STF of KEK”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN060, pp. 2173-2175. 
[n]	M. G. Niimura, A. Goto, and Y. Yano, “Acceleration Mechanism to Form a Hot-Electron Shell Around the ECR-Surface in an ECRIS Injector”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D067, pp. 250-253. 
[n]	A. Penirschke et al., “RF Front end for High Bandwidth Bunch Arrival Time Monitors in Free-Electron Lasers at DESY”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA43, pp. 157-161. 
[n]	M. E. Inman, T. D. Hall, E. J. Taylor, C. E. Reece, and O. Trofimova, “Niobium Electropolishing in an Aqueous, Non-Viscous HF-Free Electrolyte: A New Polishing Mechanism”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO012, pp. 377-381. 
[n]	P. Y. Yu, Y. He, C. X. Li, F. F. Wang, Z. J. Wang, and B. Zhang, “Cold Test of Hybrid RFQ Prototype”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 184-186. doi:10.18429/JACoW-LINAC2018-MOPO087
[n]	J. Xiao et al., “An Ultra-Low Energy Electron Beam Ion Trap in Shanghai”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI066, pp. 434-436. 
[n]	Y. Hidaka et al., “Ultrafast Electron Diffraction System at the NSLS SDL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP018, pp. 1333-1335. 
[n]	I. Hofmann, K. Beckert, S. Cocher, and U. Schaaf, “Diagnostics and Instability Studies of Cooled Ion Beams”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 229-234. 
[n]	F. Nolden et al., “Stochastic Cooling in the Framework of the FAIR Project at GSI”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP051, pp. 3479-3481. 
[n]	M. A. Plum et al., “SNS Proton Power Upgrade Status”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2124-2126. doi:10.18429/JACoW-IPAC2019-TUPTS086
[n]	J. Keane and J. Brodowski, “Meqalac RF Accelerating Structure”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3485-3488. 
[n]	F. J. Willeke, J. B. Dainton, M. Klein, P. Newman, and E. Perez, “A Lepton-proton Collider with LHC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS055, pp. 670-672. 
[n]	M. E. Biagini et al., “DANE Phi-Factory Upgrade for Siddharta Run”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOOBKI02, pp. 66-68. 
[n]	P. Ilinski, “OPTIMIZATION OF PHOTOEMISSION BLADE X-RAY BEAM POSITION MONITOR FOR WIDE RANGE OF UNDULATOR GAP OPERATION”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 781-784. doi:10.18429/JACoW-IBIC2025-WEPMO24
[n]	N. Hubert, F. Dohou, M. El Ajjouri, and D. P?®deau, “RadFET Dose Monitor System for SOLEIL”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 353-356. doi:10.18429/JACoW-IBIC2018-WEOB02
[n]	F. Roncarolo, B. Dehning, C. Fischer, and J. Koopman, “Accuracy of the SPS Transverse Emittance Monitors”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW011, pp. XX-XX. 
[n]	E. Levichev and V. Sajaev, “Nonlinear Beam Behaviour Study Using Lie Transforms”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 902-905. 
[n]	S. R. Smith, “Welcome to the 2014 International Beam Instrumentation Conference”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOIXB1, pp. XX-XX. 
[n]	F. Chautard, “Welcome to IPAC??20 and Opening Remarks by the LOC Chairman”, in Proc. IPAC'20, Caen, France, May 2020, paper MOOR03, pp. XX-XX. 
[n]	Y. Liu et al., “Strain Measurement in the Recent SNS Mercury Target with Gas Injection”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1117-1119. doi:10.18429/JACoW-IPAC2018-TUPAL047
[n]	K. Beckert et al., “Operation of the ESR at Transition Energy”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP03A, pp. 511-513. 
[n]	O. Capatina, K. Artoos, G. Huet, and B. Nicquevert, “Mechanical Dynamic Load of the LHC Arc Cryo-magnets during the LHC Installation”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT014, pp. 1849-1851. 
[n]	M. Pasini, A. Bechtold, D. Habs, O. Kester, and A. Schempp, “Beam Dynamics Studies for the Low Energy Section at MAFF”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT034, pp. 1219-1221. 
[n]	A. Yu and G. I. Sidorov, “Control of the Slow Extraction Process in a Dedicated Proton Synchrotron for Hadron Therapy”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP116, pp. 2522-2524. 
[n]	A. Alekou, R. B. Appleby, H. Bartosik, M. Carl?á, and Y. Papaphilippou, “Beam Dynamics Simulations with Crab Cavities in the SPS Machine”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 342-345. doi:10.18429/JACoW-IPAC2019-MOPGW095
[n]	N. Butler, M. P. J. Gaudreau, M. K. Kempkes, M. G. Munderville, F. M. Niell, and R. E. Simpson, “Solid-State Pulsed Power System for a Stripline Kicker”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 500-502. doi:10.18429/JACoW-NAPAC2016-TUPOB09
[n]	S. Li, “Review of Attosecond Free Electron Lasers”, in Proc. IPAC'20, Caen, France, May 2020, paper MOVIR07, pp. XX-XX. 
[n]	N. J. Evans, S. E. Kopp, P. Adamson, and D. J. Scott, “A New Tool for Longitudinal Tomography in Fermilab's Main Injector and Recycler Rings”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA061, pp. 816-818. 
[n]	J. A. Mitchell et al., “LHC Crab Cavity Coupler Test Boxes”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2248-2250. doi:10.18429/JACoW-IPAC2016-WEPMB058
[n]	R. L. Geng et al., “Improving Gradient and Q Performance of BCP Etched Multi-Cell Cavities by Applying a Light EP”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO059, pp. 735-737. 
[n]	B. C. Kuske et al., “Incorporation of a MESA Linac Modules into BERLinPro”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1449-1452. doi:10.18429/JACoW-IPAC2019-TUPGW023
[n]	Y. Shimosaki et al., “Lattice Design for 5MeV-125mA CW RFQ Operation in the LIPAc”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 977-979. doi:10.18429/JACoW-IPAC2019-MOPTS051
[n]	J. Bengtsson and M. Meddahi, “Modeling of Beam Dynamics and Comparison with Measurements for the Advanced Light Source (ALS)”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1021-1024. 
[n]	Z. G. Li et al., “The High Quality Water Cooling System for a 100 MeV Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 205-207. doi:10.18429/JACoW-Cyclotrons2016-TUP16
[n]	W. W. MacKay et al., “Commissioning and Future Plans for Polarized Protons in RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPA004, pp. 24-26. 
[n]	P. Evtushenko, A. Freyberger, C. Liu, and A. H. Lumpkin, “Near-Field Optical Diffraction Radiation Measurements at CEBAF”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH011, pp. 254-257. 
[n]	M. Sato et al., “Commissioning Status of the Linac for the iBNCT Project”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 174-176. doi:10.18429/JACoW-LINAC2018-MOPO082
[n]	M. A. Kempkes, F. O. Arntz, M. P. J. Gaudreau, A. Kardo-Sysoev, and A. Krasnykh, “A Kicker Driver for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN111, pp. 2972-2974. 
[n]	S. H. Kim, Y. J. Han, J. Y. Huang, S.-C. Kim, S. H. Nam, and S. S. Park, “Energy Stabilization of 2.5 GeV Linac using DeQing”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA063, pp. 717-719. 
[n]	F. Orsini et al., “Study and Realization of the First Superconducting Half Wave Resonator Prototype for the SRF Linac of the IFMIF Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC057, pp. 591-593. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search