JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Sanchez Barrueta, G. O. Bolme, J. T. M. Lyles, R. Z. Pinsky, and J. E. Zane, “X-Ray Detector Array for Spatial and Temporal Diagnostic at the LANSCE Linac”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 47-50. doi:10.18429/JACoW-NAPAC2019-MOYBB6
[n]	Y. Shiroyanagi et al., “Thermal Modeling of the Prototype Superconducting Undulator (SCU0)”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC07, pp. 1151-1153. 
[n]	T. Satogata, J. Cardona, V. Ptitsyn, S. Tepikian, and J. van Zeijts, “Linear Optics during the RHIC 2001-2 Run”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE049, pp. 1187-1189. 
[n]	A. C. Mezger, “caQtDM, an EPICS Display Manager Based on Qt”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC121, pp. 864-866. 
[n]	B. Rusnak et al., “Superconducting Cavity Development at Los Alamos National Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1046-1048. 
[n]	J. P. Rigla, S. Ferrer, Yu. A. Kubyshin, A. V. Poseryaev, and V. I. Shvedunov, “Compact Design of Race-track Microtron Magnets”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC159, pp. 2380-2382. 
[n]	H. Mizuno, Y. Kobayashi, T. Majima, and S. Sakamoto, “A Blumlein Type Modulator for a 100 MW-class X-band Klystron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2538-2541. 
[n]	V. V. Danilov et al., “The Concept of Round Colliding Beams”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP007L, pp. 1149-1151. 
[n]	D. Bulfone, M. Lonza, P. Michelini, and L. Pasquali, “The Design of the Energy Ramping System for ELETTRA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1809-1812. 
[n]	C. Thiebaux et al., “Development of a Transparent Profiler Based on Secondary Electrons Emission for Charged Particle Beams”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 302-304. doi:10.18429/JACoW-CYCLOTRONS2019-THB04
[n]	R. Amirikas, A. Bertolini, J. Eschke, B. Faatz, and M. Lomperski, “Vibration Stability Studies of a Type III+ XFEL/FLASH Superconducting Accelerating Module Operating at 2K”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH078, pp. 421-424. 
[n]	F. Gougnaud, Y. Lussignol, J. F. Denis, F. Gohier, and T. J. Joannem, “CEA Irfu EPICS Environment for the SARAF-LINAC Project”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1335-1339. doi:10.18429/JACoW-ICALEPCS2017-THPHA001
[n]	K. C. D. Chan et al., “Progress of APT Superconducting Linac Engineering Development”, presented at the LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4097, unpublished. 
[n]	M. Patecki, A. Mereghetti, D. Mirarchi, and S. Redaelli, “Conceptual Design of a Collimation System for the CERN Super Proton Synchrotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 802-805. doi:10.18429/JACoW-IPAC2018-TUPAF046
[n]	H. Danared, A. Källberg, K.-G. Rensfelt, and A. Simonsson, “Observations  of Ordered Ion Beams in CRYRING”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH165, pp. 2038-2040. 
[n]	T. K. Charles, D. M. Paganin, M. J. Boland, and R. T. Dowd, “Beam by Design: Current Pulse Shaping Through Longitudinal Dispersion Control”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 644-647. doi:10.18429/JACoW-IPAC2017-MOPIK055
[n]	J. C. McNeur, J. B. Rosenzweig, G. Travish, J. Zhou, and R. B. Yoder, “Resonance, Particle Stability, and Acceleration in the Micro-Accelerator Platform”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP010, pp. 121-123. 
[n]	K. H. Kim et al., “Development of Pattern Awareness Unit (PAU) for the LCLS Beam Based Fast Feedback System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN032, pp. 954-957. 
[n]	T. Masuda, T. Fukui, T. Kudo, T. Ohata, and R. T. Tanaka, “Evaluation and Improvement of PoE-based Temperature Measurement Module”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP018, pp. 207-209. 
[n]	M. Pezzetti, H. Coppier, and D. O. Tavares, “Advanced Control Facility for the Cern-Unicos Framework”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP060, pp. 516-518. 
[n]	N. Yamamoto et al., “Study of the Coherent Terahertz Radiation by Laser Bunch Slicing at UVSOR-II Electron Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA037, pp. 2570-2572. 
[n]	Y. K. Batygin, C. Pillai, and L. Rybarcyk, “Space-charge Effects in H- Low-energy Beam Transport of LANSCE”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOCS5, pp. 64-66. 
[n]	G. D'Auria, “Application of X-band Linacs”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper WE1A03, pp. 724-728. 
[n]	H. Zheng, H. Cao, and Y. X. Chen, “Design of PLC Temperature Flow Acquisition System Based on EPICS”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 109-110. doi:10.18429/JACoW-PCaPAC2018-WEP31
[n]	B. P. Bielawski, F. Locci, and S. Magnoni, “CLIC-ACM: Acquisition and Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOBB06, pp. 1404-1407. 
[n]	A. Miura, “Progress of Beam Instumentation in J-PARC Linac”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOIA02, pp. XX-XX. 
[n]	E. Bjorklund, “Replacing the Engine in Your Car While You Are Still Driving It”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1131-1133. doi:10.18429/JACoW-ICALEPCS2015-THHC2O03
[n]	G. De Ninno, A. Antoniazzi, B. Diviacco, D. Fanelli, R. Meucci, and M. Trovo, “Stabilization of the Elettra Storage-Ring Free-Electron Laser using a Derivative Feedback”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP007, pp. XX-XX. 
[n]	O. Henry and A. Mosnier, “Superconducting Cavities Calculations for a B-Factory”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 877-880. 
[n]	S. D. Holmes, J. A. Holt, J. Johnstone, J. Marriner, M. Martens, and D. McGinnis, “132 nsec Bunch Spacing in the Tevatron Proton-Antiproton Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAP01, pp. 434-436. 
[n]	C.-H. Chang et al., “In-Achromatic Superconducting Wiggler in Taiwan Light Source: Installation and Test Results”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS139, pp. 3613-3615. 
[n]	J. L. L?â et al., “ADAPOS: An Architecture for Publishing ALICE DCS Conditions Data”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 482-485. doi:10.18429/JACoW-ICALEPCS2017-TUPHA042
[n]	B. M. Campbell, M. J. Fagan, J. P. Kelley, A. D. Puckett, R. Valicenti, and J. A. Waynert, “Engineering Design of the APT Cryomodules”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4096, pp. 983-985. 
[n]	Y. Cho et al., “Feasibility Study of a 1-MW Pulsed Spallation Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAP05, pp. 363-365. 
[n]	N. Solyak et al., “PXIE at FNAL”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3B03, pp. 414-418. 
[n]	C. Vicario et al., “Timing Jitter Measurements of the SwissFEL Test Injector”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO77, pp. 140-143. 
[n]	A. L. Hillman, S. J. Pasky, N. Sereno, R. Soliday, and J. Wang, “Injector Power Supplies Reliability Improvements at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE070, pp. 3804-3806. 
[n]	F. Toufexis, J. Neilson, and S. G. Tantawi, “Coupling and Polarization Control in a mm-wave Undulator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1647-1650. doi:10.18429/JACoW-IPAC2017-TUPAB136
[n]	N. Patel et al., “Beam Position Monitoring System for the PIP-II Injector Test Accelerator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 349-351. doi:10.18429/JACoW-NAPAC2016-TUPOA29
[n]	J. R. Boyce, S. Heifets, and G. A. Krafft, “Simulations of High Disruption Colliding Beams”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH449, pp. 724-726. 
[n]	G. Bassi, J. A. Ellison, and R. L. Warnock, “Progress on a Vlasov Treatment of Coherent Synchrotron Radiation from Arbitrary Planar Orbits”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT042, pp. 2699-2701. 
[n]	C. A. Larrieu and M. H. Bickley, “Software Design Concepts for Archiving and Retrieving Control System Data”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP075, pp. XX-XX. 
[n]	B. Dehning et al., “Experimental Evidence for Multi-pass Extraction with a Bent Crystal”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAP14, pp. 470-472. 
[n]	O. O. Andreassen, L. Arnaudon, I. T. Matasaho, and A. Rijllart, “Low Cost FFT Scope using LabVIEW cRIO and FPGA”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC095, pp. 801-804. 
[n]	Y. Funahashi et al., “Development of Active Tables for Linear Colliders”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-50, pp. 816-818. 
[n]	W. Anders, A. Heugel, H.-G. Hoberg, S. Klauke, G. Mielczarek, and T. Westphal, “Highly Stable IOT Based 1,3 GHz / 16KW RF Power Source for CW Operated SC Linacs”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO045, pp. 679-682. 
[n]	A. D. Kovalenko et al., “Design and Study of a Superferric Model Dipole and Quadrupole Magnets for the GSI Fast-pulsed Synchrotron SIS100.”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF057, pp. 1735-1737. 
[n]	C. Fernandez-Figueroa and G. Molinari, “New Diagnostic Devices to Monitor Extraction from LEAR”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1094-1097. 
[n]	K. V. L. Baker et al., “Upgrade of the ISIS Muon Front End Magnets: Old and New Instrument Control Systems Working in Harmony”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 939-942. doi:10.18429/JACoW-ICALEPCS2017-TUPHA206
[n]	C. K. Allen, “On the Computation of Phase and Energy Gain for a Thin-Lens RF Gap Using a General Field Profile”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 810-813. doi:10.18429/JACoW-IPAC2017-MOPIK117
[n]	A. Pichard et al., “Method for Efficiency and Time Response Measurement on Diverse Target Ion Sources with Stable Alkali”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC154, pp. 436-438. 
[n]	M. Ferianis, A. Bucconi, G. Gaio, G. Mian, M. Predonzani, and F. Rossi, “The Copper Free FERMI Timing System: Implementation And Results”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM087, pp. 398-402. 
[n]	P. Hurh, O. Caretta, T. R. Davenne, C. J. Densham, P. Loveridge, and N. Simos, “High-Power Targets: Experience and R&D for 2 MW”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEODS2, pp. 1496-1500. 
[n]	A. Goto et al., “Injector AVF Cyclotron at RIKEN”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper B-07, pp. 51-54. 
[n]	Y.-S. Cho et al., “Test Results of the PEFP 3MeV RFQ Upgrade”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE044, pp. 2842-2844. 
[n]	Y. Jongen et al., “Iba C400 Cyclotron Project For Hadron Therapy”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 151-156. 
[n]	S. Takeda et al., “Test Accelerator Facility for Linear Colliders”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1841-1844. 
[n]	G. R. Henneberg, M. J. P. Adam, and G. R. Barkway, “Front End Photon Shutter Water Leak to Vacuum at the Canadian Light Source”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 60-62. doi:10.18429/JACoW-MEDSI2016-MOPE26
[n]	M. Krasilnikov and F. Stephan, “Beam Based Monitoring of the RF Photo Gun Stability at PITZ”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM104, pp. 464-468. 
[n]	G. O. Bolme et al., “Sparking Rate Studies and Spark Breakdown Protection Studies with a CW Radio Frequency Quadrupole Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA158, pp. 1447-1449. 
[n]	A. Brachmann et al., “The ILC Polarized Electron Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP058, pp. 3420-3422. 
[n]	J. Golm et al., “Different Versions of Cryogenic Current Comparators with Magnetic Core for Beam Current Measurements”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3431-3434. doi:10.18429/JACoW-IPAC2019-THYYPLS2
[n]	L. J. Fulop et al., “ELI-ALPS Control System Status Report”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 216-220. doi:10.18429/JACoW-ICALEPCS2015-MOPGF051
[n]	A. Kaukher, I. Krouptchenkov, B. Michalek, D. Noelle, and H. Tiessen, “XFEL Beam Loss Monitor System”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD43, pp. 401-403. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search