Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. J. Nawrocky, J. Galayda, D. M. Shu, and L. H. Yu, “A Beam Profile Monitor for the NSLS VUV Ring Employing Linear Photodiode Arrays”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1893-1896.
[n] W. Zhang, J. Bunicci, P. R. Cameron, A. V. Soukas, and W. van Asselt, “AGS Booster Tune Meter Kickers”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1216-1219.
[n] R. Gobin et al., “CEA/Saclay Light Ion Sources Status and Developments”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUPOT017, pp. 156-158.
[n] M. B. Danailov, B. Diviacco, M. Ferianis, L. Giannessi, and M. T. Trov??, “Coherent Harmonic Generation using the ELETTRA Storage Ring Optical Klystron”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUCOS04, pp. XX-XX.
[n] R. Gobin et al., “High Intensity Beam Production at CEA/Saclay For The IPHI Project”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 83-85. doi:10.18429/JACoW-ECRIS2016-WEPP01
[n] B. Dwersteg et al., “Superconducting Cavities for HERA”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1281-1284.
[n] S. Lenz, W. Hauth, and E. Pivit, “Introduction of a New Class of High-Power Y-Junction Circulators: The 352MHz/1.5MW Type Designed for CERN/LEP”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1246-1249.
[n] R. Lankshear, J. T. Keane, A. McNerney, and J. Sheehan, “Summary of the BNL 200 MeV Linac High Power RF System and its Initial Operating Performance”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper F-3, pp. 505-513.
[n] E. D. Gazazian et al., “Setup for Determination of the Longitudinal Profile and Duration of Ultrashort Electron Bunches”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-70, pp. 869-871.
[n] A. Jimeno Yepes and B. Rousseau, “Towards an Ontology Based Search Mechanism for the EDMS at CERN”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT021, pp. 1870-1872.
[n] P. Boehler et al., “Experience With the Commissioning of the U15-Undulator for SwissFEL-Aramis Beamline and New Developments for the Athos Beamline”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 283-287. doi:10.18429/JACoW-MEDSI2016-WECA03
[n] S. Thorin et al., “Progress of the Commissioning of the Test FEL at MAX-lab”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC032, pp. 139-141.
[n] C.-S. Fann, J.-P. Chiou, S. Y. Hsu, and K.-B. Liu, “A Kicker Pulse Power Supply with Low Jitter”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT099, pp. 1387-1389.
[n] E. Montbarbon et al., “The New CERN East Area Primary and Secondary Beams”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3730-3733. doi:10.18429/JACoW-IPAC2019-THPGW062
For LaTeX
Use Complete Form
For BibTeX
References
- R. J. Nawrocky, J. Galayda, D. M. Shu, and L. H. Yu, “A Beam Profile Monitor for the NSLS VUV Ring Employing Linear Photodiode Arrays”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1893-1896.
- W. Zhang, J. Bunicci, P. R. Cameron, A. V. Soukas, and W. van Asselt, “AGS Booster Tune Meter Kickers”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1216-1219.
- R. Gobin et al., “CEA/Saclay Light Ion Sources Status and Developments”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper TUPOT017, pp. 156-158.
- M. B. Danailov, B. Diviacco, M. Ferianis, L. Giannessi, and M. T. Trov??, “Coherent Harmonic Generation using the ELETTRA Storage Ring Optical Klystron”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUCOS04, pp. XX-XX.
- R. Gobin et al., “High Intensity Beam Production at CEA/Saclay For The IPHI Project”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 83-85.
- B. Dwersteg et al., “Superconducting Cavities for HERA”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1281-1284.
- S. Lenz, W. Hauth, and E. Pivit, “Introduction of a New Class of High-Power Y-Junction Circulators: The 352MHz/1.5MW Type Designed for CERN/LEP”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1246-1249.
- R. Lankshear, J. T. Keane, A. McNerney, and J. Sheehan, “Summary of the BNL 200 MeV Linac High Power RF System and its Initial Operating Performance”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper F-3, pp. 505-513.
- E. D. Gazazian et al., “Setup for Determination of the Longitudinal Profile and Duration of Ultrashort Electron Bunches”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-70, pp. 869-871.
- A. Jimeno Yepes and B. Rousseau, “Towards an Ontology Based Search Mechanism for the EDMS at CERN”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT021, pp. 1870-1872.
- P. Boehler et al., “Experience With the Commissioning of the U15-Undulator for SwissFEL-Aramis Beamline and New Developments for the Athos Beamline”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 283-287.
- S. Thorin et al., “Progress of the Commissioning of the Test FEL at MAX-lab”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC032, pp. 139-141.
- C.-S. Fann, J.-P. Chiou, S. Y. Hsu, and K.-B. Liu, “A Kicker Pulse Power Supply with Low Jitter”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT099, pp. 1387-1389.
- E. Montbarbon et al., “The New CERN East Area Primary and Secondary Beams”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3730-3733.
Back to search