JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	G. Geloni, V. Kocharyan, and E. Saldin, “Improvement of the Crossed Undulator Design for Effective Circular Polarization”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPB25, pp. 61-64. 
[n]	F. Lin, Y. Cai, V. S. Morozov, Y. M. Nosochkov, and Y. Zhang, “Update on the JLEIC Electron Collider Ring Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2780-2782. doi:10.18429/JACoW-IPAC2019-WEPGW121
[n]	R. J. England et al., “Applications for Optical-Scale Dielectric Laser Accelerators”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC28, pp. 129-131. 
[n]	K. Takahashi et al., “Profile Measurements of Bremsstrahlung Gamma-Rays from Tungsten Plates for Radioactive Isotope Production via Photonuclear Reaction using a 60 MeV Electron Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1766-1768. doi:10.18429/JACoW-IPAC2016-TUPOW011
[n]	R. Appleby et al., “The 2mrad Crossing Angle Interaction Region and Extraction Line”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS077, pp. 730-732. 
[n]	J. Kim, M. Kim, I. H. Nam, H. Suk, and M. S. Hur, “Numerical Studies on Tunable Coherent Radiations with a Laser-Plasma Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2579-2581. doi:10.18429/JACoW-IPAC2016-WEPMY015
[n]	M. Wendt et al., “High Resolution Cavity BPM for the CLIC Test Facility”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM032, pp. 189-193. 
[n]	P. M. McIntyre and W. Shen, “16 Tesla Block-Coil Dipole for Future Hadron Colliders”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ31, pp. 1462-1464. 
[n]	M. Kase, “PRESENT STATUS OF THE RIKEN RING CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P24, pp. XX-XX. 
[n]	S. Z. Zhang, Y.-M. Abiven, F. Blache, D. Corruble, C. K. Kheffafa, and S. M. Minolli, “Revolution Project: Progress in the Evolution of Soleil Motion Control Model”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 201-204. doi:10.18429/JACoW-ICALEPCS2015-MOPGF047
[n]	D. Leitner, “FIRST RESULTS FOR  THE 28 GHZ OPERATION OF THE SUPERCONDUCTING ECR ION SOURCE VENUS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19A6, pp. XX-XX. 
[n]	V. A. Dolgashev, “Traveling Wave Linear Accelerator With RF Power Flow Outside of Accelerating Cavities”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 48-51. doi:10.18429/JACoW-LINAC2016-MOOP04
[n]	K. Saito and P. Kneisel, “Temperature Dependence of the Surface Resistance of Niobium at 1300 MHz - Comparison to BCS Theory -”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP031, pp. 277-282. 
[n]	J. Keintzel et al., “Second Order Dispersion Measurements in LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 496-499. doi:10.18429/JACoW-IPAC2019-MOPMP027
[n]	T. Kamps, K. Holldack, and P. Kuske, “Optical Transition Radiation Based Beam Diagnostics at the BESSY Synchrotron Radiation Source and FEL Accelerators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT027, pp. 2532-2534. 
[n]	H. Dzitko et al., “Operational Efficiency of the AIRIX Accelerator Since its Commissioning”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR025, pp. 4017-4019. 
[n]	P. N. Ostroumov, “Heavy Ion Superconducting Linacs: Status and Upgrade Projects”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper THA01, pp. 196-196. 
[n]	W. J. Gallagher, “Relativistic Multipactoring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 2008-2010. 
[n]	J. A. Holmes, S. M. Cousineau, T. V. Gorlov, and M. A. Plum, “Injection of a Self-Consistent Beam at the Spallation Neutron Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4516-4518. doi:10.18429/JACoW-IPAC2017-THPVA037
[n]	M. Valette, P. A. P. Nghiem, and N. Pichoff, “Core-halo Limits and Beam Halo-formation Dynamic”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3417-3419. doi:10.18429/JACoW-IPAC2016-THPMR014
[n]	G. Franzini et al., “Final Design and Features of the B-train System of CNAO”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB079, pp. 2878-2880. 
[n]	R. S. Larsen, “Challenges for Emerging New Electronics Standards for Physics”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUBAUIO05, pp. 558-562. 
[n]	S. Federmann, F. Caspers, A. Grudiev, E. Montesinos, and I. Syratchev, “High Temperature Radio Frequency Loads”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS103, pp. 1783-1785. 
[n]	N. Akasaka et al., “C-band RF Main Linac System for eE- Linear Collider at 500 GeV to 1 TeV C.M. Energy”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP087G, pp. 792-794. 
[n]	H.-D. Nuhn et al., “A Longitudinal Multibunch Feedback System for PEP”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1410-1413. 
[n]	Y. Y. Du et al., “The Design and Optimization of Digital Beam Position Monitor Processor in HEPS”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper MOP024, unpublished. 
[n]	B. D. Muratori and D. J. Holder, “Matching with Space Charge”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC085, pp. 2192-2194. 
[n]	J. Alessi et al., “The AGS H RFQ Preinjector”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-59, pp. 196-198. 
[n]	S. K. Sharma, C. Amundsen, F. A. DePaola, and J. L. Tuozzolo, “Frontend Slits for Closely-Spaced Wiggler Beams”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 424-426. doi:10.18429/JACoW-MEDSI2018-THPH41
[n]	A. V. Smirnov, “On the Characterization of a CCR Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1926-1928. doi:10.18429/JACoW-IPAC2015-TUPMA041
[n]	L. R. Evans, “The Large Hadron Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FPD04, pp. 40-44. 
[n]	D. Trbojevic, Y. Papaphilippou, S. Peggs, and R. de Maria, “Lattice without Transition Energy for the Future PS2”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC129, pp. 370-372. 
[n]	G. Sterbini, D. Schulte, and E. Adli, “A Comparative Study for the CLIC Drive Beam Decelerator Optics”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR035, pp. 1897-1899. 
[n]	Y. Takeda and M. A. Plum, “Thermal Simulations of Charge-exchange Stripper Foils for High-melting-point Materials”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI011, pp. 3312-3314. 
[n]	T. Shirai, “Performance of the 100 MeV Injector Linac for the Electron Storage Ring at Kyoto University”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP74, pp. 240-242. 
[n]	G. Arduini, H. Burkhardt, K. Cornelis, Y. Papaphilippou, F. Zimmermann, and M. P. Zorzano, “Measurements of Coherent Tune Shifts and Head-Tail Growth Rates at the CERN SPS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP7B09, pp. 1447-1452. 
[n]	X. Shen et al., “AC Dipole Based Optics Measurement and Correction at RHIC”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA04, pp. 526-528. 
[n]	D. R. Bett, A. Boccardi, M. Krupa, and M. Wendt, “Simulation of the Signal Processing for the New Interaction Region BPMs of the High Luminosity LHC”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 120-123. doi:10.18429/JACoW-IBIC2020-WEPP12
[n]	M. Schaer et al., “Optimization Studies for the SwissFEL RF-Gun”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI062, pp. 425-427. 
[n]	M. Verderi et al., “PEPITES: an ultra-thin beam profiler with wide dynamic range for charged particle beams”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 521-524. doi:10.18429/JACoW-IBIC2025-TUPMO24
[n]	G. A. Bartholomew, “Research Possibilities with an Intense Neutron Generator”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper E-005, pp. XX-XX. 
[n]	Y. Yamazaki et al., “Development of the 1 GeV Proton Linac for the Japanese Hadron Facility”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 947-950. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search