Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Kim, “Regenerative Beam Extraction”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-002, pp. XX-XX.
[n] M. Amberg, M. Busch, F. D. Dziuba, H. Podlech, U. Ratzinger, and K. Aulenbacher, “Microphonics Analysis of the SC 325 MHz CH-Cavity”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO005, pp. 2319-2321.
[n] D. J. Kelliher, S. Machida, and G. H. Rees, “High-power Scaling FFAG Ring Studies”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP256, pp. 202-205.
[n] B. Buonomo, D. G. C. Di Giulio, L. G. Foggetta, and P. Valente, “The Frascati LINAC Beam-Test Facility (BTF) Performance and Upgrades”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 395-398. doi:10.18429/JACoW-IBIC2016-TUPG29
[n] M. Delheusy, C. Z. Antoine, A. Stierle, and H. Dosch, “In-situ Investigation of the Nb/Oxygen Interfaces - Correlation with the Properties of the Nb RF Superconducting Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP04, pp. 240-240.
[n] A. Murata et al., “Improvement of an S-band RF-gun cavity with a Cs-Te Photo-cathode”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP074, pp. 721-723.
[n] Y. Iwashita et al., “Study on Multilayer Thin Film Coating on Superconducting Cavity”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 215-216. doi:10.18429/JACoW-LINAC2016-MOPLR036
[n] F. L. Krawczyk et al., “Status of the LANL Activities in the Field of RF Superconductivity”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOP005, pp. 46-49.
[n] T. P. Wangler et al., “Linear Accelerator for Production of Tritium: Physics Design Challenges”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH102, pp. 548-552.
[n] S. Rimjaem et al., “Emittance for Different Bunch Charges at the Upgraded PITZ Facility”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPA06, pp. 473-476.
[n] V. S. Morozov, Y. S. Derbenev, J. Guo, A. Hutton, and Y. Zhang, “Study of Beam Synchronization at JLEIC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2463-2465. doi:10.18429/JACoW-IPAC2016-WEPMW019
[n] O. Kester et al., “An Energy Upgrade of the REX-ISOLDE Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB067, pp. 2872-2874.
[n] H.-J. Eckoldt, F. Faubladier, and N. Heidbrook, “Constant-Power Power Supplies for the TESLA Modulators”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3B08, pp. 2199-2201.
[n] B. I. Grishanov, M. G. Bakharev, and F. V. Podgorny, “High Voltage Short Pulses Generator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH041, pp. 3765-3767.
[n] Y. Xu et al., “Preliminary Results of H2+ Beam Generated by a 2.45 GHz Permanent Magnet ECR Ion Source at PKU”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI035, pp. 363-365.
[n] O. Kugeler, J. Knobloch, J. M. Vogt, and S. Aull, “Pathway to a Post Processing Increase in Q0 of SRF Cavities”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THOBB201, pp. 3129-3131.
[n] H. Bartosik et al., “Low Gamma Transition Optics for the SPS: Simulation and Experimental Results for High Brightness Beams”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO1B01, pp. 381-385.
[n] R. Xiang et al., “A Step Closer to the CW High Brilliant Beam with the ELBE SRF-Gun-II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1456-1458. doi:10.18429/JACoW-IPAC2015-TUPWA023
[n] F. D. Dziuba et al., “Superconducting CH Cavities for Heavy Ion Acceleration”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO016, pp. 3794-3796.
[n] T. K. Khoe, J. J. Livingood, and W. J. Ramler, “Proposed Midwest Tandem Cyclotron (MTC)”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A04, pp. XX-XX.
[n] A. E. Levichev, Y. D. Chernousov, V. Ivannikov, V. M. Pavlov, and I. V. Shebolaev, “Prototype of Parallel Coupled Accelerating Structure”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP093, pp. 2737-2739.
[n] J. F. Tooker et al., “Parameter Overview of SSC Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-11, pp. 323-325.
[n] G. Horikoshi and Y. Kimura, “Status of TRISTAN”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 34-39.
[n] C. Ryu et al., “PLS Linac Instrument an Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1368-1371.
[n] J. M. Weber and M. J. Chin, “ALS FPGA-based Transverse Feedback Electronics”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF017, pp. 130-132.
[n] M. Veronese et al., “Intra Undulator Screen Diagnostics for the FERMI@Elettra FEL”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPB76, pp. 519-523.
[n] M. S. Toplis, J. W. McKenzie, B. D. Muratori, D. J. Scott, and P. H. Williams, “Comparison of Model vs. Reality for VELA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1810-1813. doi:10.18429/JACoW-IPAC2016-TUPOW028
[n] S. H. Kim et al., “Development and Management of the Modulator System for PLS-II 3.0 GeV Electron Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD073, pp. 3683-3685.
[n] L. J. Kibbe, J. A. Jungerman, and N. F. Peek, “Central Region Studies for Incorporating an Axial Ion Source in the Davis 76 - Inch Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper A-003, pp. XX-XX.
[n] Q. Luo, Q. K. Jia, B. G. Sun, and Z. R. Zhou, “Design of Cavity Beam Monitor at HLS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC111, pp. 1278-1280.
[n] D. Horan, G. Pile, and A. Cours, “352-MHz Klystron Performance at the Advanced Photon Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP153, pp. 1022-1024.
[n] Y. Lee, P.-A. Duperrex, V. Gandel, D. C. Kiselev, and U. M??ller, “Simulation Based Analysis of the Anomalous RF Drifts of a Current Monitor at PSI Proton Accelerator Facilities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC072, pp. 636-638.
[n] P. Craievich et al., “Consolidation and Extension of the High-gradient LINAC RF Technology at PSI”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 937-940. doi:10.18429/JACoW-LINAC2018-THPO115
[n] G. V. Eremeev, A-M. Valente-Feliciano, A. T. Wu, and D. Gu, “Exploring the Effect of AL2O3 ALD Coating on a High Gradient ILC Single-Cell Cavity”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC096, pp. 2441-2443.
[n] R. Sobbia, S. Dementjevs, S. Joray, and M. Wohlmuther, “Thermo-mechanical Investigations of the SINQ Cannelloni" Target"”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI065, pp. 3445-3447.
[n] R. K. Buckley et al., “Vertical Test Facility for Superconducting RF Cavities at Daresbury Laboratory”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO008, pp. 365-367.
[n] O. Mete et al., “An Ultracold Electron Facility in Manchester”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 714-716. doi:10.18429/JACoW-IPAC2014-MOPRI049
[n] P.-E. Bernaudin, R. Ferdinand, P. Bosland, Y. Gomez, and G. Olry, “Assembling, Testing and Installing the SPIRAL2 Superconducting Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO001, pp. 3752-3754.
[n] A. K. Ciftci, S. Sultansoy, and O. Yavas, “TESLA*HERA as Lepton Photon - Hadron Collider”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP2A17, pp. 388-390.
[n] D. Kreinick et al., “Using Coherent Tune Shifts to Evaluate Electron Cloud Effects on Beam Dynamics at CesrTA”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper PST10, pp. 130-133.
[n] O. Etisken, A. K. Ciftci, and Y. Papaphilippou, “Conceptual Design of a Pre-Booster Ring for the FCC e+e- Injector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 917-920. doi:10.18429/JACoW-IPAC2017-MOPVA029
[n] F. W. Guy and J. W. Hurd, “Procedures for Setting RF Phase and Amplitude in SSC Drift-Tube-Linac Tanks”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-54, pp. 196-198.
[n] S. Meng et al., “Passive plasma lens experiments at FACET-II”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 808-812. doi:10.18429/JACoW-NAPAC2025-WEP064
[n] P. Gerhard et al., “Status and Perspectives of the CW Upgrade of the UNILAC HLI at GSI”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEA1C03, pp. 183-185.
[n] S. Anderson et al., “First Operation of the Upgraded SLAC A-Line”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP110G, pp. 2468-2470.
[n] F. Zimmermann, Y. Papaphilippou, R. Aleksan, and A. Apyan, “Scenarios for Circular Gamma-Gamma Higgs Factories”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2156-2159. doi:10.18429/JACoW-IPAC2015-TUPTY057
[n] G. Turemen et al., “Manufacturing and the LLRF Tests of the SANAEM RFQ”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 964-967. doi:10.18429/JACoW-IPAC2016-MOPOY051
[n] K.-H. Park et al., “The Magnet Power Supply for PAL-XFEL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 504-507. doi:10.18429/JACoW-IPAC2014-MOPME058
[n] H. Frese et al., “First Experience with the PETRA Control System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3379-3382.
[n] M. Gross et al., “Laser Pulse Train Management with an Acousto-optic Modulator”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD61, pp. 189-192.
[n] C. Arcambal et al., “Conditioning of the First Mass Production Power Couplers for the ESS Elliptical Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 288-292. doi:10.18429/JACoW-SRF2019-MOP086
[n] B. Cheymol, “Estimation of the Thermal Load and Signal Level of the ESS Wire Scanner”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP036, pp. 137-139.
[n] H. M. Xie, “IPM design and new ideas for HIAF”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper TUPMO23, unpublished.
[n] F. Mayet, R. W. Assmann, S. Schreiber, and M. Vogt, “Studies on a Diagnostic Pulse for FLASH”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3506-3508. doi:10.18429/JACoW-IPAC2014-THPME116
[n] A. Adelmann, Y. J. Bi, Y. Ineichen, C. Kraus, S. J. Russell, and J. J. Yang, “The Object Oriented Parallel Accelerator Library (OPAL), Design, Implementation and Application”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper WE3IOPK01, pp. 107-110.
[n] S. Y. Xu, N. Wang, and S. Wang, “Effects of Magnetic Field Tracking Errors and Space Charge on Beam Dynamics at CSNS/RCS”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO1A02, pp. 484-486.
[n] A. Koschik, B. Goddard, W. H?Âfle, G. Kotzian, D. K. Kramer, and T. Kramer, “Abort Gap Cleaning Using the Transverse Feedback System: Simulation and Measurements in the SPS for the LHC Beam Dump System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP060, pp. 2656-2658.
[n] T. Saeki et al., “Developement of a New Support-Stand with High Thermal-Stability for the SCSS Project”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP20003, pp. XX-XX.
[n] B. Cheymol and E. Lundh, “Conceptual Design of the ESS DTL Faraday Cup”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP037, pp. 140-142.
[n] K. Umemori et al., “Construction of Main Linac Cryomodule for Compact ERL Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO016, pp. 2349-2351.
[n] R. Wegner, W. Wuensch, G. Burt, and B. J. Woolley, “Bead-Pull Measurement Method and Tuning of a Prototype CLIC Crab Cavity”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP035, pp. 134-136.
[n] A. Mereghetti et al., “SixTrack-Fluka Active Coupling for the Upgrade of the SPS Scrapers”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA064, pp. 2657-2659.
[n] M. Heilmann et al., “High Power RF Coupler for the CW-Linac Demonstrator at GSI”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 990-992. doi:10.18429/JACoW-IPAC2017-MOPVA054
[n] H.-D. Gr?ñf et al., “Operation of the S-DALINAC, Related Topics and Developments”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOP012, pp. 65-69.
[n] U. Mavric, M. Felber, C. Gerth, H. Schlarb, W. Jalmuzna, and A. Piotrowski, “Preliminary Measurement Results of the Upgraded Energy BPM at FLASH”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR017, pp. 813-815.
[n] J. R. Calvey et al., “CesrTA Retarding Field Analyzer Modeling Results”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD022, pp. 1970-1972.
[n] J. Bengtsson, “Design and Control of Ultra Low Emittance Light Sources”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper TU3IOPK04, pp. 68-72.
[n] A. A. Aksoy, J. Esberg, and D. Schulte, “Bunch Compressor Design for CLIC Drive Beam”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2924-2926. doi:10.18429/JACoW-IPAC2014-THPRO028
[n] H. F. Dylla et al., “A High-Average-Power FEL for Industrial Applications”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAG11, pp. 102-104.
[n] F. Hellberg et al., “Investigation of Quadrupole Magnets for the XFEL Project Using a Rotating Coil Set-up”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH044, pp. 345-347.
[n] C. Kim, H.-S. Kang, G. Kim, I. S. Ko, and J. H. Ko, “Monitor for Microbunching Instability in X-ray Free Electron Laser”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper TUPP27, unpublished.
[n] M. Okamura, J. M. Fite, V. Lo Destro, D. Raparia, and J. Ritter, “Steering Magnet Design for a Limited Space”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP005, pp. 136-138.
[n] K. Jimbo, T. Hiromasa, M. Nakao, A. Noda, H. Souda, and H. Tongu, “Investigation of Synchro-Betatron Couplings at S-LSR”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP146, pp. 367-369.
[n] Y. M. Nosochkov, Y. Cai, F. Lin, V. S. Morozov, and Y. Zhang, “Dynamic Aperture of JLEIC Electron Collider Ring with Errors and Correction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1920-1923. doi:10.18429/JACoW-IPAC2019-TUPRB113
[n] S. D. Walker et al., “A Holistic Approach to Simulating Beam Losses in the Large Hadron Collider Using BDSIM”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 221-226. doi:10.18429/JACoW-ICAP2018-TUPAF15
[n] R. E. Potts, S. M. Cousineau, and J. A. Holmes, “Observations of Space Charge Effects in the Spallation Neutron Source Accumulator Ring”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP262, pp. 223-225.
[n] V. S. Morozov et al., “Status of the MEIC Ion Collider Ring Design”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2307-2310. doi:10.18429/JACoW-IPAC2015-TUPWI031
[n] T. Kamitani et al., “Beam Optics Matching in the KEKB Injector Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D019, pp. 429-431.
[n] S. Werin et al., “An Electron Gun Test Stand to Prepare for the MAX IV Project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD065, pp. 1551-1553.
[n] K. Ott, Y. Bergmann, M. Martin, and L. Pichl, “Upgrade of the Neutron Dose Measurement System at BESSY”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1781-1783. doi:10.18429/JACoW-IPAC2017-TUPIK043
[n] C. E. Clayton, F. F. Chen, C. Darrow, C. Joshi, and D. Umstadter, “Experimental Study of the Plasma Beat Wave-Accelerator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3551-3554.
[n] C. Hessler et al., “Beam Optics Studies for BDF and for Tests of a Prototype Target”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 754-757. doi:10.18429/JACoW-IPAC2018-TUPAF033
[n] M. K. Kempkes, M. P. J. Gaudreau, T. H. Hawkey, and K. Schrock, “Solid-State Transmitter for a 2 MW Klystron”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP255, pp. 1304-1306.
[n] M. I. Green, D. H. Nelson, and D. A. Van Dyke, “Harmonic-Error-Analysis Measurements of Dipole and Quadrupole Magnets at Lawrence Berkeley Laboratory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1573-1576.
[n] F. Perlick et al., “An Electron Beam Detector for the FLASH II Beam Dump”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF05, pp. 814-817.
[n] W. Liu et al., “Advancements in the development of beam dynamics software APES for CEPC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1021-1024. doi:10.18429/JACoW-IPAC2024-TUPC11
[n] C.-K. Min, S. H. Jung, H.-S. Kang, C. Kim, I. S. Ko, and S. J. Park, “RF Timing Distribution and Laser Synchronization Commissioning of PAL-XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4234-4236. doi:10.18429/JACoW-IPAC2016-THPOY057
[n] K. Artoos, M. Guinchard, and T. Renaglia, “Sliding Force Measurements on the LHC RF Contact Plug in Modules at 15 K and in UHV”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD021, pp. 1473-1475.
[n] T. Morishita, K. Hasegawa, Y. Kondo, H. Oguri, and M. Otani, “Field Tuning of a Radio-frequency Quadrupole Using Full 3D Modeling”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 798-801. doi:10.18429/JACoW-LINAC2018-THPO049
[n] J. Pfingstner, E. Adli, and D. Schulte, “Effects of Accelerating Structures on On-line DFS in the Main Linac of CLIC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1387-1390. doi:10.18429/JACoW-IPAC2015-TUBD3
[n] D. Gu, Q. Gu, D. Huang, M. Zhang, and M. H. Zhao, “Study of Beam-Based Alignment for Shanghai Soft X-Ray FEL Facility”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB006, pp. 10-12.
[n] N. Bazin, G. Devanz, and F. Orsini, “Vacuum Study of the Cavity String for the IFMIF - LIPAc Cryomodule”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI003, pp. 3291-3293.
[n] J. Lorkiewicz, B. Dwersteg, A. Brinkmann, W. Moeller, D. Kostin, and M. Layalan, “Surface TiN Coating of TESLA Couplers at DESY as an Antimultipactor Remedy”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT002, pp. 448-452.
[n] W. A. Barth et al., “Further Layout Investigations for a Superconducting CW-linac for Heavy Ions at GSI”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 108-111. doi:10.18429/JACoW-SRF2017-MOPB023
[n] Q. Luo, N. Chen, G. Feng, and N. Hu, “MAGNET SUBSYSTEM OF HLS II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME013, pp. 3537-3539.
[n] A. Schempp, B. Hofmann, and O. K. Kester, “A RFQ-Decelerator for HITRAP”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN020, pp. 1437-1438.
[n] S. Wang, S. Fu, H. F. Ouyang, and J. Peng, “Beam Commissioning Plan for CSNS Accelerators”, in Proc. HB'12, Beijing, China, Sep. 2012, paper TUO3C05, pp. 334-338.
[n] Y. Jiao, J. Wu, and Q. Qin, “Multi-Dimensional Optimization of a Tapered Free Electron Laser”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP083, pp. 1783-1785.
[n] J. Ph. G. L et al., “Consolidation of the LHC Superconducting Circuits: A Major Step towards 14 TeV Collisions”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD032, pp. 3575-3577.
[n] M. Re?í, W. Blokland, and R. Seviour, “Using Machine Learning Tools to Predict Accelerator Failure”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper THAO02, unpublished.
[n] T. Mimashi et al., “The Pulsed Magnet System for the Simultaneous Injection of KEK-PF and KEKB Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP018, pp. 172-174.
[n] G. K. Sahoo, K. Balewski, W. Decking, and J. Keil, “Measurement and Correction of Transverse Dispersion in PETRA III”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD086, pp. 4485-4487.
[n] C. Zhang, “RFQ Beam Dynamics Design for Large Science Facilities and Accelerator-Driven Systems”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3B04, pp. 419-423.
[n] S. Jones, D. Newton, and A. Wolski, “Initial Estimate of Fringe Field Effects in HL-LHC using Frequency Map Analysis”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1067-1070. doi:10.18429/JACoW-IPAC2014-TUPRO025
[n] D. A. Shkitov et al., “Non-Invasive Bunch Length Diagnostics Based on Interferometry From Double Diffraction Radiation Target”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME067, pp. 631-633.
[n] G. X. Xia, A. Caldwell, and P. Muggli, “Future Colliders Based on a Modulated Proton Bunch Driven Plasma Wakefield Acceleration”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR050, pp. 3039-3041.
[n] B. Rusnak, “High Intensity Proton Linacs”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95J01, pp. 752-752.
[n] M. J. Shirakata et al., “Collimator Upgrade Plan of the J-PARC Main Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS035, pp. 3496-3498.
[n] S. Onuma et al., “Development of Spill Control System for the J-PARC Slow Extraction”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP070, pp. 245-247.
[n] M. Palmer, “CesrTA Preliminary Recommendations for the ILC Positron Damping Ring”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper FTR01, pp. 202-202.
[n] R. B. Yoder et al., “First Acceleration in a Resonant Optical-Scale Laser-Powered Structure”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2624-2626. doi:10.18429/JACoW-IPAC2015-WEPWA053
[n] Yu. I. Golubenko et al., “DC HIGH POWER ELV ACCELERATORS FOR INDUSTRIAL AND RESEARCH APPLICATION”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper FRJI06, pp. XX-XX.
[n] N. Wells and P. R. Hanley, “Inert Gas Ion Beams from a Duoplasmatron Ion Source”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 43-46.
[n] Y. Ma et al., “The status of ARIEL e-linac RF system”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 805-807. doi:10.18429/JACoW-LINAC2024-THPB091
[n] M. Eshraqi, H. Danared, and R. Miyamoto, “Beam Dynamics of the ESS Superconducting Linac”, in Proc. HB'12, Beijing, China, Sep. 2012, paper TUO3B02, pp. 278-282.
[n] L. Hagge et al., “Configuration Management in the Series Production of the XFEL Accelerator Modules”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2863-2866. doi:10.18429/JACoW-IPAC2014-THPRO006
[n] F. Maimone, R. M. Brodhage, M. Kaiser, W. Vinzenz, and M. Vossberg, “325 MHz High Power RF Coupler for the CH-Cavities of the FAIR p-LINAC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3712-3714. doi:10.18429/JACoW-IPAC2015-THPF014
[n] M. H. Zhao et al., “Commissioning of the 150 MeV SSRF Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP124, pp. 3649-3651.
[n] I. Syratchev et al., “High-Power Testing of X-Band CLIC Power Generating Structures”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3RAC02, pp. 1873-1875.
[n] K. Tian, J. A. Safranek, and Y. T. Yan, “Machine Based Optimization Using Genetic Algorithms in a Storage Ring”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOCB1, pp. 430-432.
[n] N. Baboi, G. Bowden, R. M. Jones, J. R. Lewandowski, and S. G. Tantawi, “Transverse Impedance Bench Measurements in NLC/JLC Accelerating Structures”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB030, pp. 1261-1263.
[n] M. Steck et al., “Recent Results on Equilibrium Temperatures and Cooling Forces with Electron Cooled Heavy Ion Beams in the ESR”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1197-1200.
[n] M. Giovannozzi and C. Hernalsteens, “Numerical Study of Beam Trapping in Stable Islands for Simple 2D Models of Betatronic Motion”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC077, pp. 1350-1352.
[n] T. Himel, L. Hendrickson, F. Rouse, and H. Shoaee, “Use of Digital Control Theory State Space Formalism for Feedback at SLC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1451-1454.
[n] L. Groening et al., “Upgrade of the UNILAC for FAIR”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper WEO1AB01, pp. 245-248.
[n] T. M. Mitsuhashi, K. Oide, and F. Zimmermann, “Conceptual Design for SR Monitor in the FCC Beam Emittance (Size) Diagnostic”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 133-136. doi:10.18429/JACoW-IPAC2016-MOPMB022
[n] L. B. Jones, B. L. Militsyn, T. C. Q. Noakes, H. E. Scheibler, and A. S. Terekhov, “The Evolution of the Transverse Energy Distribution of Electrons from a GaAs Photocathode as a Function of its Degradation State”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1748-1751. doi:10.18429/JACoW-IPAC2015-TUPJE055
[n] R. Cimino et al., “Search for New e-cloud Mitigator Materials for High Intensity Particle Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2332-2334. doi:10.18429/JACoW-IPAC2014-WEPME033
[n] M. Krishnan et al., “Energetic Condensation Growth of Nb Thin-films”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUIOB01, pp. 309-318.
[n] S. C. Leemann, W. E. Byrne, M. Venturini, J. Bengtsson, and A. Streun, “A Novel 7BA Lattice for a 196-m Circumference Diffraction-Limited Soft X-Ray Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4252-4255. doi:10.18429/JACoW-IPAC2018-THPMF077
[n] E. R. Arab, G. Travish, N. Vartanian, J. Xu, and R. B. Yoder, “Fabrication of Micro-Scale Metallic and Dielectric Accelerator Structures with Sub-Wavelength Features”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP013, pp. 4556-4558.
[n] C. Z. Antoine and R. Crooks, “Reducing Electropolishing Time with Chemical-Mechanical Polishing”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO071, pp. 405-405.
[n] R. E. Laxdal, Y. Ma, B. Matheson, B. S. Waraich, Z. Y. Yao, and V. Zvyagintsev, “Fundamental Power Coupler Design for a 325 MHz Balloon SSR Cavity”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 252-254. doi:10.18429/JACoW-SRF2019-MOP076
[n] C. Z. Antoine et al., “Characterization of Superconducting Multilayers Samples”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO070, pp. 401-404.
[n] S. S. Som et al., “Development of 100 kW RF Amplifier for Superconducting Cyclotron at VECC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA110, pp. 476-478.
[n] R. Kammering and Ch. Schmidt, “Feedbacks and Automation at the Free Electron Laser in Hamburg (FLASH)”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC121, pp. 1345-1347.
[n] W. D. Cornelius et al., “The SAIC PET Isotope Tracer Accelerator Facility”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-35, pp. 139-141.
[n] F. G. Ruedenauer, “A Mass Analyzer System for the High Voltage Terminal of a Van de Graaff Heavy Ion Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 35-38.
[n] Y. Nakazawa et al., “Prototype of an Inter-digital H-mode Drift-tube Linac for Muon Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 180-183. doi:10.18429/JACoW-LINAC2018-MOPO085
[n] H. Kaiser, “New Approaches to Tuning of TESLA Resonators”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP043, pp. 324-327.
[n] P. W. van Amersfoort, R. J. Bakker, D. A. Jaroszynski, D. Oepts, C. A. J. van der Geer, and A. F. G. van der Meer, “Lasing with FELIX”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 46-49.
[n] W. Fischer et al., “Vacuum Pressure Rise with Intense Ion Beams in RHIC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI034, pp. 1485-1487.
[n] D. Trines, “Status of the TESLA Design”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO1002, pp. 8-12.
[n] H. Takeda, J. H. Billen, and T. Bhatia, “Beam Dynamics Simulation of the Spallation Neutron Source Linear Accelerator”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4045, pp. 499-501.
[n] M. K. Dey et al., “Coil Centering Of The Kolkata Superconducting Cyclotron Magnet”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 438-440.
[n] T. Kroyer, F. Caspers, and E. Mahner, “The CERN-SPS Experiment on Microwave Transmission Through the Beam Pipe”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP031, pp. 2212-2214.
[n] M. Kleinmann, R. Eichhorn, F. Hug, and N. Pietralla, “Upgrade Plans on the Superconducting Electron Accelerator S-DALINAC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC006, pp. 2010-2012.
[n] S. Kronenberg et al., “Quantum efficiency measurements and beam diagnostics test stand design for a dual-mode electron gun at ELSA”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 253-256. doi:10.18429/JACoW-IBIC2025-MOPMO31
[n] J. G. Kulpin, K. J. Kleman, and R. A. Legg, “The Use of a Solid State Analog Television Transmitter as a Superconducting Electron Gun Power Amplifier”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC071, pp. 3452-3454.
[n] K. Fong and R. Leewe, “Parametric Pumped Oscillation by Lorentz Force in Superconducting Rf Cavity”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2798-2800. doi:10.18429/JACoW-IPAC2019-WEPRB003
[n] J. Clendenin et al., “SLC Positron Source Startup”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-17, pp. 568-570.
[n] G. X. Xia, A. Caldwell, C. Huang, and W. B. Mori, “Simulation Study of Proton-Driven PWFA Based on CERN SPS Beam”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP108, pp. 301-303.
[n] E. A. Peralta, R. L. Byer, E. R. Colby, R. J. England, C. McGuinness, and K. Soong, “Fabrication and Measurement of Dual Layer Silica Grating Structures for Direct Laser Acceleration”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP096, pp. 280-282.
[n] E. Adli and D. Schulte, “Beam-Based Alignment for the CLIC Decelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP001, pp. 547-549.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Kim, “Regenerative Beam Extraction”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper B-002, pp. XX-XX.
- M. Amberg, M. Busch, F. D. Dziuba, H. Podlech, U. Ratzinger, and K. Aulenbacher, “Microphonics Analysis of the SC 325 MHz CH-Cavity”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO005, pp. 2319-2321.
- D. J. Kelliher, S. Machida, and G. H. Rees, “High-power Scaling FFAG Ring Studies”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP256, pp. 202-205.
- B. Buonomo, D. G. C. Di Giulio, L. G. Foggetta, and P. Valente, “The Frascati LINAC Beam-Test Facility (BTF) Performance and Upgrades”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 395-398.
- M. Delheusy, C. Z. Antoine, A. Stierle, and H. Dosch, “In-situ Investigation of the Nb/Oxygen Interfaces - Correlation with the Properties of the Nb RF Superconducting Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP04, pp. 240-240.
- A. Murata et al., “Improvement of an S-band RF-gun cavity with a Cs-Te Photo-cathode”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP074, pp. 721-723.
- Y. Iwashita et al., “Study on Multilayer Thin Film Coating on Superconducting Cavity”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 215-216.
- F. L. Krawczyk et al., “Status of the LANL Activities in the Field of RF Superconductivity”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper MOP005, pp. 46-49.
- T. P. Wangler et al., “Linear Accelerator for Production of Tritium: Physics Design Challenges”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH102, pp. 548-552.
- S. Rimjaem et al., “Emittance for Different Bunch Charges at the Upgraded PITZ Facility”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPA06, pp. 473-476.
- V. S. Morozov, Y. S. Derbenev, J. Guo, A. Hutton, and Y. Zhang, “Study of Beam Synchronization at JLEIC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2463-2465.
- O. Kester et al., “An Energy Upgrade of the REX-ISOLDE Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB067, pp. 2872-2874.
- H.-J. Eckoldt, F. Faubladier, and N. Heidbrook, “Constant-Power Power Supplies for the TESLA Modulators”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP3B08, pp. 2199-2201.
- B. I. Grishanov, M. G. Bakharev, and F. V. Podgorny, “High Voltage Short Pulses Generator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH041, pp. 3765-3767.
- Y. Xu et al., “Preliminary Results of H2+ Beam Generated by a 2.45 GHz Permanent Magnet ECR Ion Source at PKU”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI035, pp. 363-365.
- O. Kugeler, J. Knobloch, J. M. Vogt, and S. Aull, “Pathway to a Post Processing Increase in Q0 of SRF Cavities”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THOBB201, pp. 3129-3131.
- H. Bartosik et al., “Low Gamma Transition Optics for the SPS: Simulation and Experimental Results for High Brightness Beams”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO1B01, pp. 381-385.
- R. Xiang et al., “A Step Closer to the CW High Brilliant Beam with the ELBE SRF-Gun-II”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1456-1458.
- F. D. Dziuba et al., “Superconducting CH Cavities for Heavy Ion Acceleration”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO016, pp. 3794-3796.
- T. K. Khoe, J. J. Livingood, and W. J. Ramler, “Proposed Midwest Tandem Cyclotron (MTC)”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A04, pp. XX-XX.
- A. E. Levichev, Y. D. Chernousov, V. Ivannikov, V. M. Pavlov, and I. V. Shebolaev, “Prototype of Parallel Coupled Accelerating Structure”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP093, pp. 2737-2739.
- J. F. Tooker et al., “Parameter Overview of SSC Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-11, pp. 323-325.
- G. Horikoshi and Y. Kimura, “Status of TRISTAN”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 34-39.
- C. Ryu et al., “PLS Linac Instrument an Control System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1368-1371.
- J. M. Weber and M. J. Chin, “ALS FPGA-based Transverse Feedback Electronics”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF017, pp. 130-132.
- M. Veronese et al., “Intra Undulator Screen Diagnostics for the FERMI@Elettra FEL”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPB76, pp. 519-523.
- M. S. Toplis, J. W. McKenzie, B. D. Muratori, D. J. Scott, and P. H. Williams, “Comparison of Model vs. Reality for VELA”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1810-1813.
- S. H. Kim et al., “Development and Management of the Modulator System for PLS-II 3.0 GeV Electron Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD073, pp. 3683-3685.
- L. J. Kibbe, J. A. Jungerman, and N. F. Peek, “Central Region Studies for Incorporating an Axial Ion Source in the Davis 76 - Inch Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper A-003, pp. XX-XX.
- Q. Luo, Q. K. Jia, B. G. Sun, and Z. R. Zhou, “Design of Cavity Beam Monitor at HLS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC111, pp. 1278-1280.
- D. Horan, G. Pile, and A. Cours, “352-MHz Klystron Performance at the Advanced Photon Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP153, pp. 1022-1024.
- Y. Lee, P.-A. Duperrex, V. Gandel, D. C. Kiselev, and U. M??ller, “Simulation Based Analysis of the Anomalous RF Drifts of a Current Monitor at PSI Proton Accelerator Facilities”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC072, pp. 636-638.
- P. Craievich et al., “Consolidation and Extension of the High-gradient LINAC RF Technology at PSI”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 937-940.
- G. V. Eremeev, A-M. Valente-Feliciano, A. T. Wu, and D. Gu, “Exploring the Effect of AL2O3 ALD Coating on a High Gradient ILC Single-Cell Cavity”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC096, pp. 2441-2443.
- R. Sobbia, S. Dementjevs, S. Joray, and M. Wohlmuther, “Thermo-mechanical Investigations of the SINQ Cannelloni" Target"”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI065, pp. 3445-3447.
- R. K. Buckley et al., “Vertical Test Facility for Superconducting RF Cavities at Daresbury Laboratory”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO008, pp. 365-367.
- O. Mete et al., “An Ultracold Electron Facility in Manchester”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 714-716.
- P.-E. Bernaudin, R. Ferdinand, P. Bosland, Y. Gomez, and G. Olry, “Assembling, Testing and Installing the SPIRAL2 Superconducting Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO001, pp. 3752-3754.
- A. K. Ciftci, S. Sultansoy, and O. Yavas, “TESLA*HERA as Lepton Photon - Hadron Collider”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP2A17, pp. 388-390.
- D. Kreinick et al., “Using Coherent Tune Shifts to Evaluate Electron Cloud Effects on Beam Dynamics at CesrTA”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper PST10, pp. 130-133.
- O. Etisken, A. K. Ciftci, and Y. Papaphilippou, “Conceptual Design of a Pre-Booster Ring for the FCC e+e- Injector”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 917-920.
- F. W. Guy and J. W. Hurd, “Procedures for Setting RF Phase and Amplitude in SSC Drift-Tube-Linac Tanks”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-54, pp. 196-198.
- S. Meng et al., “Passive plasma lens experiments at FACET-II”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 808-812.
- P. Gerhard et al., “Status and Perspectives of the CW Upgrade of the UNILAC HLI at GSI”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEA1C03, pp. 183-185.
- S. Anderson et al., “First Operation of the Upgraded SLAC A-Line”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP110G, pp. 2468-2470.
- F. Zimmermann, Y. Papaphilippou, R. Aleksan, and A. Apyan, “Scenarios for Circular Gamma-Gamma Higgs Factories”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2156-2159.
- G. Turemen et al., “Manufacturing and the LLRF Tests of the SANAEM RFQ”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 964-967.
- K.-H. Park et al., “The Magnet Power Supply for PAL-XFEL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 504-507.
- H. Frese et al., “First Experience with the PETRA Control System”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3379-3382.
- M. Gross et al., “Laser Pulse Train Management with an Acousto-optic Modulator”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD61, pp. 189-192.
- C. Arcambal et al., “Conditioning of the First Mass Production Power Couplers for the ESS Elliptical Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 288-292.
- B. Cheymol, “Estimation of the Thermal Load and Signal Level of the ESS Wire Scanner”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP036, pp. 137-139.
- H. M. Xie, “IPM design and new ideas for HIAF”, presented at the 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, paper TUPMO23, unpublished.
- F. Mayet, R. W. Assmann, S. Schreiber, and M. Vogt, “Studies on a Diagnostic Pulse for FLASH”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3506-3508.
- A. Adelmann, Y. J. Bi, Y. Ineichen, C. Kraus, S. J. Russell, and J. J. Yang, “The Object Oriented Parallel Accelerator Library (OPAL), Design, Implementation and Application”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper WE3IOPK01, pp. 107-110.
- S. Y. Xu, N. Wang, and S. Wang, “Effects of Magnetic Field Tracking Errors and Space Charge on Beam Dynamics at CSNS/RCS”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO1A02, pp. 484-486.
- A. Koschik, B. Goddard, W. H?Âfle, G. Kotzian, D. K. Kramer, and T. Kramer, “Abort Gap Cleaning Using the Transverse Feedback System: Simulation and Measurements in the SPS for the LHC Beam Dump System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP060, pp. 2656-2658.
- T. Saeki et al., “Developement of a New Support-Stand with High Thermal-Stability for the SCSS Project”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP20003, pp. XX-XX.
- B. Cheymol and E. Lundh, “Conceptual Design of the ESS DTL Faraday Cup”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP037, pp. 140-142.
- K. Umemori et al., “Construction of Main Linac Cryomodule for Compact ERL Project”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO016, pp. 2349-2351.
- R. Wegner, W. Wuensch, G. Burt, and B. J. Woolley, “Bead-Pull Measurement Method and Tuning of a Prototype CLIC Crab Cavity”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP035, pp. 134-136.
- A. Mereghetti et al., “SixTrack-Fluka Active Coupling for the Upgrade of the SPS Scrapers”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA064, pp. 2657-2659.
- M. Heilmann et al., “High Power RF Coupler for the CW-Linac Demonstrator at GSI”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 990-992.
- H.-D. Gr?ñf et al., “Operation of the S-DALINAC, Related Topics and Developments”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper MOP012, pp. 65-69.
- U. Mavric, M. Felber, C. Gerth, H. Schlarb, W. Jalmuzna, and A. Piotrowski, “Preliminary Measurement Results of the Upgraded Energy BPM at FLASH”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR017, pp. 813-815.
- J. R. Calvey et al., “CesrTA Retarding Field Analyzer Modeling Results”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD022, pp. 1970-1972.
- J. Bengtsson, “Design and Control of Ultra Low Emittance Light Sources”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper TU3IOPK04, pp. 68-72.
- A. A. Aksoy, J. Esberg, and D. Schulte, “Bunch Compressor Design for CLIC Drive Beam”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2924-2926.
- H. F. Dylla et al., “A High-Average-Power FEL for Industrial Applications”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAG11, pp. 102-104.
- F. Hellberg et al., “Investigation of Quadrupole Magnets for the XFEL Project Using a Rotating Coil Set-up”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH044, pp. 345-347.
- C. Kim, H.-S. Kang, G. Kim, I. S. Ko, and J. H. Ko, “Monitor for Microbunching Instability in X-ray Free Electron Laser”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper TUPP27, unpublished.
- M. Okamura, J. M. Fite, V. Lo Destro, D. Raparia, and J. Ritter, “Steering Magnet Design for a Limited Space”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP005, pp. 136-138.
- K. Jimbo, T. Hiromasa, M. Nakao, A. Noda, H. Souda, and H. Tongu, “Investigation of Synchro-Betatron Couplings at S-LSR”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP146, pp. 367-369.
- Y. M. Nosochkov, Y. Cai, F. Lin, V. S. Morozov, and Y. Zhang, “Dynamic Aperture of JLEIC Electron Collider Ring with Errors and Correction”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1920-1923.
- S. D. Walker et al., “A Holistic Approach to Simulating Beam Losses in the Large Hadron Collider Using BDSIM”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 221-226.
- R. E. Potts, S. M. Cousineau, and J. A. Holmes, “Observations of Space Charge Effects in the Spallation Neutron Source Accumulator Ring”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP262, pp. 223-225.
- V. S. Morozov et al., “Status of the MEIC Ion Collider Ring Design”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2307-2310.
- T. Kamitani et al., “Beam Optics Matching in the KEKB Injector Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D019, pp. 429-431.
- S. Werin et al., “An Electron Gun Test Stand to Prepare for the MAX IV Project”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD065, pp. 1551-1553.
- K. Ott, Y. Bergmann, M. Martin, and L. Pichl, “Upgrade of the Neutron Dose Measurement System at BESSY”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1781-1783.
- C. E. Clayton, F. F. Chen, C. Darrow, C. Joshi, and D. Umstadter, “Experimental Study of the Plasma Beat Wave-Accelerator”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3551-3554.
- C. Hessler et al., “Beam Optics Studies for BDF and for Tests of a Prototype Target”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 754-757.
- M. K. Kempkes, M. P. J. Gaudreau, T. H. Hawkey, and K. Schrock, “Solid-State Transmitter for a 2 MW Klystron”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP255, pp. 1304-1306.
- M. I. Green, D. H. Nelson, and D. A. Van Dyke, “Harmonic-Error-Analysis Measurements of Dipole and Quadrupole Magnets at Lawrence Berkeley Laboratory”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1573-1576.
- F. Perlick et al., “An Electron Beam Detector for the FLASH II Beam Dump”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF05, pp. 814-817.
- W. Liu et al., “Advancements in the development of beam dynamics software APES for CEPC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC11, pp. 1021-1024.
- C.-K. Min, S. H. Jung, H.-S. Kang, C. Kim, I. S. Ko, and S. J. Park, “RF Timing Distribution and Laser Synchronization Commissioning of PAL-XFEL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4234-4236.
- K. Artoos, M. Guinchard, and T. Renaglia, “Sliding Force Measurements on the LHC RF Contact Plug in Modules at 15 K and in UHV”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD021, pp. 1473-1475.
- T. Morishita, K. Hasegawa, Y. Kondo, H. Oguri, and M. Otani, “Field Tuning of a Radio-frequency Quadrupole Using Full 3D Modeling”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 798-801.
- J. Pfingstner, E. Adli, and D. Schulte, “Effects of Accelerating Structures on On-line DFS in the Main Linac of CLIC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1387-1390.
- D. Gu, Q. Gu, D. Huang, M. Zhang, and M. H. Zhao, “Study of Beam-Based Alignment for Shanghai Soft X-Ray FEL Facility”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB006, pp. 10-12.
- N. Bazin, G. Devanz, and F. Orsini, “Vacuum Study of the Cavity String for the IFMIF - LIPAc Cryomodule”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI003, pp. 3291-3293.
- J. Lorkiewicz, B. Dwersteg, A. Brinkmann, W. Moeller, D. Kostin, and M. Layalan, “Surface TiN Coating of TESLA Couplers at DESY as an Antimultipactor Remedy”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT002, pp. 448-452.
- W. A. Barth et al., “Further Layout Investigations for a Superconducting CW-linac for Heavy Ions at GSI”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 108-111.
- Q. Luo, N. Chen, G. Feng, and N. Hu, “MAGNET SUBSYSTEM OF HLS II”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME013, pp. 3537-3539.
- A. Schempp, B. Hofmann, and O. K. Kester, “A RFQ-Decelerator for HITRAP”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN020, pp. 1437-1438.
- S. Wang, S. Fu, H. F. Ouyang, and J. Peng, “Beam Commissioning Plan for CSNS Accelerators”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper TUO3C05, pp. 334-338.
- Y. Jiao, J. Wu, and Q. Qin, “Multi-Dimensional Optimization of a Tapered Free Electron Laser”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP083, pp. 1783-1785.
- J. Ph. G. L et al., “Consolidation of the LHC Superconducting Circuits: A Major Step towards 14 TeV Collisions”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD032, pp. 3575-3577.
- M. Re?í, W. Blokland, and R. Seviour, “Using Machine Learning Tools to Predict Accelerator Failure”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper THAO02, unpublished.
- T. Mimashi et al., “The Pulsed Magnet System for the Simultaneous Injection of KEK-PF and KEKB Ring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP018, pp. 172-174.
- G. K. Sahoo, K. Balewski, W. Decking, and J. Keil, “Measurement and Correction of Transverse Dispersion in PETRA III”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD086, pp. 4485-4487.
- C. Zhang, “RFQ Beam Dynamics Design for Large Science Facilities and Accelerator-Driven Systems”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO3B04, pp. 419-423.
- S. Jones, D. Newton, and A. Wolski, “Initial Estimate of Fringe Field Effects in HL-LHC using Frequency Map Analysis”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1067-1070.
- D. A. Shkitov et al., “Non-Invasive Bunch Length Diagnostics Based on Interferometry From Double Diffraction Radiation Target”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME067, pp. 631-633.
- G. X. Xia, A. Caldwell, and P. Muggli, “Future Colliders Based on a Modulated Proton Bunch Driven Plasma Wakefield Acceleration”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR050, pp. 3039-3041.
- B. Rusnak, “High Intensity Proton Linacs”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95J01, pp. 752-752.
- M. J. Shirakata et al., “Collimator Upgrade Plan of the J-PARC Main Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS035, pp. 3496-3498.
- S. Onuma et al., “Development of Spill Control System for the J-PARC Slow Extraction”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP070, pp. 245-247.
- M. Palmer, “CesrTA Preliminary Recommendations for the ILC Positron Damping Ring”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper FTR01, pp. 202-202.
- R. B. Yoder et al., “First Acceleration in a Resonant Optical-Scale Laser-Powered Structure”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2624-2626.
- Yu. I. Golubenko et al., “DC HIGH POWER ELV ACCELERATORS FOR INDUSTRIAL AND RESEARCH APPLICATION”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper FRJI06, pp. XX-XX.
- N. Wells and P. R. Hanley, “Inert Gas Ion Beams from a Duoplasmatron Ion Source”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 43-46.
- Y. Ma et al., “The status of ARIEL e-linac RF system”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 805-807.
- M. Eshraqi, H. Danared, and R. Miyamoto, “Beam Dynamics of the ESS Superconducting Linac”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper TUO3B02, pp. 278-282.
- L. Hagge et al., “Configuration Management in the Series Production of the XFEL Accelerator Modules”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2863-2866.
- F. Maimone, R. M. Brodhage, M. Kaiser, W. Vinzenz, and M. Vossberg, “325 MHz High Power RF Coupler for the CH-Cavities of the FAIR p-LINAC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3712-3714.
- M. H. Zhao et al., “Commissioning of the 150 MeV SSRF Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP124, pp. 3649-3651.
- I. Syratchev et al., “High-Power Testing of X-Band CLIC Power Generating Structures”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE3RAC02, pp. 1873-1875.
- K. Tian, J. A. Safranek, and Y. T. Yan, “Machine Based Optimization Using Genetic Algorithms in a Storage Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOCB1, pp. 430-432.
- N. Baboi, G. Bowden, R. M. Jones, J. R. Lewandowski, and S. G. Tantawi, “Transverse Impedance Bench Measurements in NLC/JLC Accelerating Structures”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB030, pp. 1261-1263.
- M. Steck et al., “Recent Results on Equilibrium Temperatures and Cooling Forces with Electron Cooled Heavy Ion Beams in the ESR”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1197-1200.
- M. Giovannozzi and C. Hernalsteens, “Numerical Study of Beam Trapping in Stable Islands for Simple 2D Models of Betatronic Motion”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC077, pp. 1350-1352.
- T. Himel, L. Hendrickson, F. Rouse, and H. Shoaee, “Use of Digital Control Theory State Space Formalism for Feedback at SLC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1451-1454.
- L. Groening et al., “Upgrade of the UNILAC for FAIR”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper WEO1AB01, pp. 245-248.
- T. M. Mitsuhashi, K. Oide, and F. Zimmermann, “Conceptual Design for SR Monitor in the FCC Beam Emittance (Size) Diagnostic”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 133-136.
- L. B. Jones, B. L. Militsyn, T. C. Q. Noakes, H. E. Scheibler, and A. S. Terekhov, “The Evolution of the Transverse Energy Distribution of Electrons from a GaAs Photocathode as a Function of its Degradation State”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1748-1751.
- R. Cimino et al., “Search for New e-cloud Mitigator Materials for High Intensity Particle Accelerators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2332-2334.
- M. Krishnan et al., “Energetic Condensation Growth of Nb Thin-films”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUIOB01, pp. 309-318.
- S. C. Leemann, W. E. Byrne, M. Venturini, J. Bengtsson, and A. Streun, “A Novel 7BA Lattice for a 196-m Circumference Diffraction-Limited Soft X-Ray Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4252-4255.
- E. R. Arab, G. Travish, N. Vartanian, J. Xu, and R. B. Yoder, “Fabrication of Micro-Scale Metallic and Dielectric Accelerator Structures with Sub-Wavelength Features”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP013, pp. 4556-4558.
- C. Z. Antoine and R. Crooks, “Reducing Electropolishing Time with Chemical-Mechanical Polishing”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO071, pp. 405-405.
- R. E. Laxdal, Y. Ma, B. Matheson, B. S. Waraich, Z. Y. Yao, and V. Zvyagintsev, “Fundamental Power Coupler Design for a 325 MHz Balloon SSR Cavity”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 252-254.
- C. Z. Antoine et al., “Characterization of Superconducting Multilayers Samples”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO070, pp. 401-404.
- S. S. Som et al., “Development of 100 kW RF Amplifier for Superconducting Cyclotron at VECC”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA110, pp. 476-478.
- R. Kammering and Ch. Schmidt, “Feedbacks and Automation at the Free Electron Laser in Hamburg (FLASH)”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC121, pp. 1345-1347.
- W. D. Cornelius et al., “The SAIC PET Isotope Tracer Accelerator Facility”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-35, pp. 139-141.
- F. G. Ruedenauer, “A Mass Analyzer System for the High Voltage Terminal of a Van de Graaff Heavy Ion Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 35-38.
- Y. Nakazawa et al., “Prototype of an Inter-digital H-mode Drift-tube Linac for Muon Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 180-183.
- H. Kaiser, “New Approaches to Tuning of TESLA Resonators”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP043, pp. 324-327.
- P. W. van Amersfoort, R. J. Bakker, D. A. Jaroszynski, D. Oepts, C. A. J. van der Geer, and A. F. G. van der Meer, “Lasing with FELIX”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 46-49.
- W. Fischer et al., “Vacuum Pressure Rise with Intense Ion Beams in RHIC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI034, pp. 1485-1487.
- D. Trines, “Status of the TESLA Design”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO1002, pp. 8-12.
- H. Takeda, J. H. Billen, and T. Bhatia, “Beam Dynamics Simulation of the Spallation Neutron Source Linear Accelerator”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4045, pp. 499-501.
- M. K. Dey et al., “Coil Centering Of The Kolkata Superconducting Cyclotron Magnet”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 438-440.
- T. Kroyer, F. Caspers, and E. Mahner, “The CERN-SPS Experiment on Microwave Transmission Through the Beam Pipe”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP031, pp. 2212-2214.
- M. Kleinmann, R. Eichhorn, F. Hug, and N. Pietralla, “Upgrade Plans on the Superconducting Electron Accelerator S-DALINAC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC006, pp. 2010-2012.
- S. Kronenberg et al., “Quantum efficiency measurements and beam diagnostics test stand design for a dual-mode electron gun at ELSA”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 253-256.
- J. G. Kulpin, K. J. Kleman, and R. A. Legg, “The Use of a Solid State Analog Television Transmitter as a Superconducting Electron Gun Power Amplifier”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC071, pp. 3452-3454.
- K. Fong and R. Leewe, “Parametric Pumped Oscillation by Lorentz Force in Superconducting Rf Cavity”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2798-2800.
- J. Clendenin et al., “SLC Positron Source Startup”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-17, pp. 568-570.
- G. X. Xia, A. Caldwell, C. Huang, and W. B. Mori, “Simulation Study of Proton-Driven PWFA Based on CERN SPS Beam”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP108, pp. 301-303.
- E. A. Peralta, R. L. Byer, E. R. Colby, R. J. England, C. McGuinness, and K. Soong, “Fabrication and Measurement of Dual Layer Silica Grating Structures for Direct Laser Acceleration”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP096, pp. 280-282.
- E. Adli and D. Schulte, “Beam-Based Alignment for the CLIC Decelerator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP001, pp. 547-549.
Back to search