JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. S. Przybyla and E. Radcliffe, “RF Amplifier for Next Generation Light Sources”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH154, pp. 1385-1387. 
[n]	W. Chupp et al., “A Quadrupole Beam Transport Experiment for Heavy Ions Under Extreme Space Charge Conditions”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2549-2552. 
[n]	R. Nagaoka, J.-C. Denard, and M.-P. Level, “Recent Studies of Geometric and Resistive-wall Impedance at SOLEIL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH033, pp. 2850-2852. 
[n]	R. Grewe et al., “Introducing the Vertical High-temperature UHV Furnace of the S-DALINAC for Future Cavity Material Studies”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 891-893. doi:10.18429/JACoW-SRF2017-THPB066
[n]	A. Scheinker, “Model Independent Beam Tuning”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA068, pp. 1862-1864. 
[n]	C. Taylor and R. B. Meuser, “Conceptual Magnet Design for an Iron-Free Colliding Beam Acelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2042-2045. 
[n]	B. Erdelyi and S. L. Manikonda, “An Application of Differential Algebraic Methods and Liouville's Theorem: Uniformization of Gaussian Beams”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC018, pp. 289-291. 
[n]	S. P. Moeller, “ASTRID - A Small Multi-Purpose Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 158-161. 
[n]	H. Delsim-Hashemi et al., “Status of the sFLASH Undulator System”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC04, pp. 500-502. 
[n]	W. Brefeld, R. Brinkmann, and J. Rossbach, “Low Emittance Optic for PETRA II”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 166-169. 
[n]	A. Biocca et al., “The Advanced Light Source Accelerator Control System at Ten Years From Commissioning”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP008, pp. XX-XX. 
[n]	J. T. Weir et al., “ETA-II Experiments for Determining Advanced Radiographic Capabilities of Induction Linacs”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V022, pp. 1260-1262. 
[n]	D. J. Scott, D. Capista, I. Kourbanis, K. Seiya, and M.-J. Yang, “6 Batch Injection and Slipped Beam Tune Measurements in Fermilab's Main Injector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP021, pp. 3776-3778. 
[n]	T. J. Jones et al., “Development of a Novel Supporting System for High Luminosity LHC SRF Crab Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 304-308. doi:10.18429/JACoW-SRF2017-MOPB104
[n]	S. Hillert et al., “The Beam Trajectory Monitor for the TTF-FEL at DESY”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B11, pp. 1803-1805. 
[n]	S. Berry et al., “Clean Room Integration of the European XFEL Cavity Strings”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2474-2476. doi:10.18429/JACoW-IPAC2014-WEPRI001
[n]	B. Salvant et al., “Update of the SPS Impedance Model”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD056, pp. 2057-2059. 
[n]	D. B. Engel, R. Mueller, and P. Stange, “Virtualization Infrastructure within the Controls Environment of the Light Sources at HZB”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC005, pp. 1100-1102. 
[n]	A. G. Afonin et al., “Application of Bent Crystals at IHEP 70-GeV Accelerator to Enhance the Efficiency of its Usage”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3A11, pp. 364-366. 
[n]	M. Ounsy, G. Abeille, S. Pierre-Joseph Zephir, K. S. Saintin, and E. De Ley, “Integrating a Workflow Engine within a Commercial SCADA to Build End User Applications in a Scientific Environment”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS029, pp. 860-862. 
[n]	C. M. Bhat, “Iso-Adiabatic Merging of pbar Stacks in the Recycler”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE008, pp. 1093-1095. 
[n]	L. Praestegaard et al., “The Booster for the Canadian Light Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH117, pp. 3951-3953. 
[n]	M. P. Laverty, S. F. Fang, K. Fong, and Q. Zheng, “ISAC II RF Controls - Status and Commissioning”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH106, pp. 3047-3049. 
[n]	S. Posen and M. Liepe, “Minimizing Helium Pressure Sensitivity in Elliptical SRF Cavities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC080, pp. 2396-2398. 
[n]	D. Hui, M. Borland, J. M. Byrd, and Y. Sun, “Jitter Study for the APS Linac Photo-injector Beam”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 647-651. doi:10.18429/JACoW-LINAC2018-TH1A05
[n]	E. F. Daly et al., “EIC Project Overview and Related SRF Technologies”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper TUCAA02, unpublished. 
[n]	Z. Wang et al., “Progress on Coupled RFQ-SFRFQ Accelerator for Materials Irradiation Research”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC013, pp. 3302-3304. 
[n]	A. Burov and V. Lebedev, “Transverse Resistive Wall Impedance for Multi-layer Round Chambers”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI021, pp. 1452-1454. 
[n]	L. R. Shen, D. K. Liu, and T. Wan, “Virtualization in Control System Environment”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU031, pp. 1138-1140. 
[n]	Yu. Ts. Oganessian et al., “Dubna Project of the Heavy Ion Storage Ring Complex K4-K10”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VII-05, pp. 290-293. 
[n]	S. L. Manikonda, P. N. Ostroumov, and B. Erdelyi, “Formation of Beams in the Ion Accelerator Complex of the Medium Energy Electron Ion Collider Facility at JLab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOEPPB006, pp. 88-90. 
[n]	V. M. Arrieta and S. R. McNeal, “Economical Manufacture of Seamless High-Purity Niobium”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO065, pp. 555-557. 
[n]	R. Grewe et al., “Preparation for Cavity Material Studies at the Vertical High-Temperature UHV-Furnace of the S-DALINAC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 209-211. doi:10.18429/JACoW-LINAC2016-MOPLR032
[n]	M. Schuett, U. Ratzinger, and M. Syha, “First RF Measurements of the 325 MHz Ladder RFQ”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 826-829. doi:10.18429/JACoW-LINAC2018-THPO060
[n]	J. F. DeFord, B. Held, and J. J. Petillo, “Adaptive Mesh Refinement for Particle-Tracking Calculation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS047, pp. 3600-3602. 
[n]	J. Rodier et al., “Construction of the ALPHA-X Photo-injector Cavity”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH113, pp. 1277-1279. 
[n]	J. J. Song, K. C. Harkay, Y. W. Kang, R. L. Kustom, and A. Nassiri, “Higher-Order Modes of Storage Ring RF Cavities and Their Interaction with the Beam at the Advanced Photon Source (APS)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P030, pp. 2944-2946. 
[n]	M. Bieler, K. Balewski, W. Drube, J. Keil, and A. Kling, “Status of the PETRA III Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP009, pp. 1620-1622. 
[n]	J. A. Maloney et al., “Studies of the Twin Helix Parametric-resonance Ionization Cooling Channel with COSY INFINITY”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD011, pp. 1428-1430. 
[n]	J. S. Chai, J. H. Ha, Y. S. Kim, D. S. Ahn, S. B. Hong, and K. H. Kwon, “Beam Transport System Using Fuzzy Controller in the KCCH Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-38, pp. 310-313. 
[n]	H. Saugnac et al., “Status of the Beta 0.12 Superconducting Cryomodule Development for the Spiral2 Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH146, pp. 396-398. 
[n]	M. Schuett, U. Ratzinger, and M. Syha, “RF Measurements and Tuning of the 325 MHz Ladder-RFQ”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 925-927. doi:10.18429/JACoW-IPAC2019-MOPTS033
[n]	A. R. Donaldson, “Currrent to Frequency Converter for Digitization of Millisecond Beam Signals”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3439-3442. 
[n]	T. E. Oseroff and M. Liepe, “Improvements to the Cornell Sample Host System”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 956-960. doi:10.18429/JACoW-SRF2019-THP045
[n]	J. P. Delahaye, P. Lefevre, and J. P. Riunaud, “Improved Recombination of the 20 PSB Bunches and Merging into 5 Dense Bunches in the Cern Proton Synchrotron”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3565-3568. 
[n]	A. Miyazaki et al., “Conditioning Experience of the ESS Spoke Cryomodule Prototype”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1011-1013. doi:10.18429/JACoW-SRF2019-THP058
[n]	S. V. Kutsaev et al., “Microwave Thermionic Electron Gun for Synchrotron Light Sources”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2189-2192. doi:10.18429/JACoW-IPAC2019-TUPTS113
[n]	G. Myneni and M. Hutton, “SRF Technology-Past, Present and Future Options”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP130, pp. 865-867. 
[n]	Y. Xiao, Y. Liu, and Y. Leng, “Joint analysis of beam loss and beam position during the injection process at Hefei light source”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 215-219. doi:10.18429/JACoW-IBIC2025-MOPMO16
[n]	G. L. Sabbi, X. Wang, G. Arduini, M. Giovannozzi, and E. Todesco, “Conceptual Design Study of the High Luminosity LHC Recombination Dipole”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2712-2715. doi:10.18429/JACoW-IPAC2014-WEPRI094
[n]	T. E. Oseroff, M. Liepe, B. Moeckly, M. J. Sowa, and Z. Sun, “RF Characterization of Novel Superconducting Materials and Multilayers”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 950-955. doi:10.18429/JACoW-SRF2019-THP044
[n]	I. G. Gonin, J. F. DeFord, B. Held, and N. Solyak, “Multipactor Simulations in Superconducting Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN093, pp. 2248-2250. 
[n]	S. Cao, L. Lai, J. Chen, and Y. Leng, “BAM system and machine stability at SXFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4866-4868. doi:10.18429/JACoW-IPAC2023-THPL177
[n]	D. Hernandez and B. Erdelyi, “Charge Density Estimations with Orthogonal Polynomials”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC094, pp. 355-357. 
[n]	P. Alexandre, R. Ben El Fekih, F. Bouvet, and M.-A. Tordeux, “Pulsed Magnets and Power Supplies for Injection & Extraction in the SOLEIL II Project”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4377-4380. doi:10.18429/JACoW-IPAC2023-THPA175
[n]	V. Chouhan, A. Netepenko, D. Bice, D. Burk, G. Wu, and T. Ring, “Centrifugal barrel polishing of a 650 MHz single-cell niobium SRF cavity”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper WEP010, unpublished. 
[n]	I. Bogdanov et al., “QUENCH PROCESS IN FAST-CYCLING SUPERCONDUCTING DIPOLE FOR SIS300”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP01, pp. XX-XX. 
[n]	A. I. Kvasha, V. L. Serov, and A. Feschenko, “Development of the INR Linear Accelerator DTL RF System”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 191-195. doi:10.18429/JACoW-RUPAC2016-THXSH01

For LaTeX

Use Complete Form

For BibTeX

References

Back to search