JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. J. Barnes et al., “Operational Experience of a Prototype LHC Injection Kicker Magnet with a Low SEY Coating and Redistributed Power Deposition”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3974-3977. doi:10.18429/JACoW-IPAC2019-THPRB072
[n]	A. Lyapin et al., “Development of the S-Band BPM System for ATF2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP025, pp. 4003-4005. 
[n]	W. Anders et al., “BERLinPro: a Prototype ERL for Future Synchrotron Light Sources”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO017, pp. 223-227. 
[n]	G. Issarovitch, D. Proch, D. Reschke, W. Singer, and X. Singer, “Development of Centrifugal Barrel Polishing for Treatment of Superconducting Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP56, pp. 482-485. 
[n]	M. Takao et al., “Estimation of the Longitudinal Impedance of the ATF Damping Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 506-509. 
[n]	L. J. Nevay et al., “LHC Collimation and Energy Deposition Studies Using Beam Delivery Simulation (BDSIM)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3101-3103. doi:10.18429/JACoW-IPAC2016-WEPOY047
[n]	P. Van Trappen, R. Noulibos, and W. J. M. Weterings, “Stripping Foil Displacement Unit Control for H- Injection in PSB at CERN”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 363-366. doi:10.18429/JACoW-ICALEPCS2015-MOPGF121
[n]	J. K. Spradlin, C. E. Reece, O. Trofimova, and A-M. Valente-Feliciano, “Automation of Particulate Characterization”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 477-481. doi:10.18429/JACoW-SRF2019-TUP030
[n]	S. N. Galyamin, A. Aryshev, A. A. Grigoreva, A. V. Tyukhtin, and V. V. Vorobev, “Radiation from a Dielectrically Loaded Waveguide with Open End”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 228-230. doi:10.18429/JACoW-IPAC2019-MOPGW061
[n]	Yuri K. Batygin, “Halo-Free Beam Transport in Nonlinear Focusing Channel”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E201, pp. 611-613. 
[n]	S. J. Miller, J. Binkowski, M. J. Johnson, Y. Xu, and A. Facco, “Design for Manufacture of Superconducting Halfwave Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO051, pp. 213-215. 
[n]	O. Mouton et al., “Computer-assisted Electron Beam Characterization at AIRIX Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN013, pp. 3250-3252. 
[n]	C. Y. Wu et al., “Integration of the Timing System for TPS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1833-1835. doi:10.18429/JACoW-IPAC2014-TUPRI113
[n]	S. R. Mane, “Ideas for Siberian Snakes and Spin Rotators in Very High Energy e+e- Rings”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 47-48. doi:10.18429/JACoW-eeFACT2016-MOT4H7
[n]	S. M. Lidia, J. Corlett, J. Pusina, J. Staples, and A. Zholents, “An Injector for the Proposed Berkeley Ultrafast X-Ray Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB021, pp. 2086-2088. 
[n]	I. N. Onishchenko, V. Kiselev, A. Linnik, V. Mirny, and V. Uskov, “Wakefield Excitation in Plasma Filled Dielectric Structure by a Train of Electron Bunches”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP085, pp. 2995-2997. 
[n]	Y. Cai, J. Seeman, K. G. Sonnad, and U. Wienands, “Doubling the PEP-II Luminosity in Simulations”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS048, pp. 649-651. 
[n]	H. J. Kim, “Progress on Superconducting Linac for the RAON Heavy Ion Accelerator”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEA1C02, pp. 180-182. 
[n]	C. H. Haquin and F. Negoita, “Development of the Thermal Beam Loss Monitors of the Spiral2 Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC043, pp. 181-183. 
[n]	D. Quartullo, L. Intelisano, I. Karpov, and G. Papotti, “Simulation Studies of Longitudinal Stability for High-Intensity LHC-Type Beams in the CERN SPS”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2249-2252. doi:10.18429/JACoW-IPAC2022-WEPOMS009
[n]	J. A. Mock, A. S. Fisher, R. T. Herbst, P. Krejcik, and L. Sapozhnikov, “Commissioning of the LCLS-II Machine Protection System for MHz CW Beams”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 154-159. doi:10.18429/JACoW-IBIC2023-TU3I01
[n]	D. R. Xu, Z. H. Bai, L. Wang, W. Wang, and H. Xu, “Corrector Layout Optimization Using NSGA-II for HALS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4629-4631. doi:10.18429/JACoW-IPAC2018-THPMK135
[n]	L. Hagge et al., “DESY EDMS: Information Management for World-Wide Collaborations”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP045, pp. 2896-2898. 
[n]	R. Boni, “HOM-free Cavities”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUY01A, pp. 182-186. 
[n]	B. Franzke and G. Eickhoff, “Separation of Reaction or Decay Products from Cooled Ion Beams Stored in the ESR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1093-1096. 
[n]	J. Tamura, A. Miura, T. Morishita, H. Ao, T. Maruta, and T. Miyao, “Development of H0 Beam Diagnostic Line in MEBT2 of J-PARC Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 277-279. doi:10.18429/JACoW-LINAC2016-MOPLR063
[n]	S. C. Leemann and M. Eriksson, “Coupling and Brightness Considerations for the MAX IV 3 GeV Storage Ring”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO05, pp. 243-245. 
[n]	B. Yee-Rend??n, Y. Kondo, F. M. Maekawa, S. I. Meigo, and J. Tamura, “Beam Optics Design of the Superconducting Region of the JAEA ADS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 181-183. doi:10.18429/JACoW-IPAC2019-MOPGW040
[n]	H. T. Li, Z. G. He, and Q. K. Jia, “A Simple Method for Generating a Few Femtosecond Pulses in Seeded FELs”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP009, pp. 371-373. 
[n]	L. Intelisano, H. Damerau, and I. Karpov, “Measurements of longitudinal Loss of Landau damping in the CERN Proton Synchrotron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2665-2668. doi:10.18429/JACoW-IPAC2023-WEPA012
[n]	T. V. Shaftan et al., “Electron Bunch Compression in the SDL Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI100, pp. 834-836. 
[n]	W. Duckitt, J. Abraham, J. L. Conradie, M. J. Van Niekerk, and T. R. Niesler, “A New Digital Low-level RF Control System for Cyclotrons”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 258-262. doi:10.18429/JACoW-Cyclotrons2016-WEB01
[n]	K. Hosoyama et al., “Development of the KEK-B Superconducting Crab Cavity”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THXM02, pp. 2927-2931. 
[n]	R. Xiang and J. Teichert, “Electron Sources and Polarization”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 94-99. doi:10.18429/JACoW-eeFACT2016-TUT2H6
[n]	I. Gonin, A. I. Fedoseev, V. P. Gorbul, M. S. Kaschiev, and V. V. Paramonov, “2 D Codes Set for RF Cavities Design”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1026-1029. 
[n]	M. Tobiyama, H. Ikeda, and G. Mitsuka, “Development of Bunch Position Monitors to Observe Sudden Beam Loss of SuperKEKB Rings”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 179-182. doi:10.18429/JACoW-IBIC2023-TUP002
[n]	J. Choi, H.-S. Kang, and T.-Y. Lee, “Features of the PAL-XFEL Design”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH062, pp. 152-155. 
[n]	D. A. Harder, G. Rakowsky, and J. Skaritka, “Magnetic Measurement System for the NSLS Superconducting Undulator Vertical Test Facility”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT021, pp. 1730-1732. 
[n]	A. Rajabi and R. Wanzenberg, “Resistive wall impedance of multilayer beam pipes of general cross sections”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3402-3404. doi:10.18429/JACoW-IPAC2023-WEPL124
[n]	Y. Sun and M. Borland, “Optics Design and Beam Dynamics Optimization of a Five-bend Achromat Lattice for the Advanced Photon Source Upgrade”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO10, pp. 258-260. 
[n]	S. Pei et al., “Conceptual Design of the Drive Beam for a PWFA-LC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP079, pp. 2682-2684. 
[n]	H. G. Lee et al., “Analysis and Design of Backing Beam for U10 Undulator at the PLS”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16035, pp. XX-XX. 
[n]	Y. Yoshida et al., “Development of a New Picosecond Pulse Radiolysis System by Using Femtosecond Laser Synchronized with Picosecond Electron Beams”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E102, pp. 596-598. 
[n]	J. P. Gourber, G. Guignard, A. Hofmann, J. P. Koutchouk, and H. Moshammer, “Compensation of Linear Betatron Coupling in LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1429-1432. 
[n]	I. G. Brown, H. Emig, C. Muehle, E. M. Oks, and P. Spaedtke, “Development of a Vacuum Arc Metal Ion Source for Heavy Ion Accelerators”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP032L, pp. 1484-1486. 
[n]	L. Hagge, S. Eucker, J. Kreutzkamp, and D. Szepielak, “The XFEL Roombook - Processes and Tools for Designing the Technical Infrastructure of the European XFEL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP046, pp. 2899-2901. 
[n]	M. Basten et al., “Development of a 217 MHz Superconducting CH Structure”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP060, pp. 563-565. 
[n]	H. Sakai et al., “High Power Tests of KEK-ERL Input Coupler for Main Linac Under LN2 Condition”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO005, pp. 356-360. 
[n]	K. Muto, Z. Igarashi, and S. Shibata, “Simple Q - Measurement of KEK Proton Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1818-1821. 
[n]	J. B. Rosenzweig et al., “Optimum Beam Creation in Photoinjectors Using Space-charge Expansion”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS098, pp. 0-3645. 
[n]	G. Tranquille and J. Cenede, “Design and Optimisation of the ELENA Electron Cooler Gun and Collector”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3354-3356. doi:10.18429/JACoW-IPAC2016-THPMB048
[n]	R. J. Barlow, H. Fieguth, W. Kozanecki, S. A. Majewski, P. Roudeau, and A. Stocchi, “Simulation of PEP-II Accelerator Backgrounds Using TURTLE”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP023, pp. 1835-1837. 
[n]	Y. Kondo, K. Hasegawa, T. Morishita, H. Kawamata, F. Naito, and T. Sugimura, “Recent Progress with the J-PARC RFQs”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB052, pp. 972-974. 
[n]	S. Abeyratne and B. Erdelyi, “The First Particle-Based Proof of Principle Numerical Simulation of Electron Cooling”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1241-1244. doi:10.18429/JACoW-NAPAC2016-THPOA68
[n]	W. Fischer et al., “Measurement of the Total Cross Section of Uranium-uranium Collisions at a Center-of-mass Energy of 192.8 GeV per Nucleon-pair”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI078, pp. 1529-1531. 
[n]	V. V. Paramonov, “One Aspect of Thermal Stability for 4-vane RFQ Operation with High Heat Loading”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC014, pp. 352-354. 
[n]	V. Schlott et al., “Intra Bunch Train Feedback System for the European X-FEL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH096, pp. 3017-3019. 
[n]	D. Prasuhn et al., “Status of the Cooler Synchrotron COSY Juelich”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH054, pp. 3350-3352. 
[n]	D. Horan, D. J. Bromberek, L. H. Morrison, and G. J. Waldschmidt, “Improvements to RF Cavity Input Couplers at the Advanced Photon Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP077, pp. 1005-1007. 
[n]	J. Qiang et al., “Start-to-end Simulation of a Next Generation Light Source Using the Real Number of Electrons”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO66, pp. 112-116. 
[n]	A. V. Fedotov et al., “Numerical Studies of the Friction Force for the RHIC Electron Cooler”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT092, pp. 4278-4280. 
[n]	X. X. Huang, W. Fang, A. Grudiev, and Z. T. Zhao, “Study on the Design of the X-band Waveguide-damped Structure”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2886-2889. doi:10.18429/JACoW-IPAC2019-WEPRB034
[n]	H. Sugimoto, H. Koiso, A. Morita, Y. Ohnishi, and K. Oide, “Design Study of the SuperKEKB Interaction Region Optics”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 950-952. doi:10.18429/JACoW-IPAC2014-TUOAB02
[n]	S. H. Kim, “Progress in FRIB Energy Upgrade Cavity R&D at Michigan State University”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper WEPTEV006, pp.. 
[n]	J. Borrel, Y. Dabin, F. Ewald, and P. Van Vaerenbergh, “Collimator for ESRF-EBS”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 23-25. doi:10.18429/JACoW-MEDSI2018-TUPH02
[n]	H. Ego et al., “Status on the SPring-8 Storage Ring RF System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1865-1868. 
[n]	D. E. Kim et al., “Stretched Wire Flip Coil System for Magnetic Field Measurements”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF049, pp. 1714-1716. 
[n]	S. Burger et al., “Turn by Turn Profile Monitors for the CERN SPS and LHC”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF07, pp. 216-219. 
[n]	R. L. Warnock, G. R. Bart, and S. Fenster, “Longitudinal Stability of a Coasting Beam in a Corrugated Vacuum Chamber”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2580-2583. 
[n]	J. Yang et al., “Magnetic Field Measurement System for CYCHU-10”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP021, pp. 181-183. 
[n]	S. Molloy et al., “Development of the C-Band BPM System for ATF2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP028, pp. 4009-4011. 
[n]	B. Carlsten, E. Brown, J. Tapia, M. Gulley, and S. Mosby, “Update and improvement planning at the Los Alamos Neutron Science Center (LANSCE)”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPS24, unpublished. 
[n]	K. R. Kim et al., “Upgrade of Accelerator Complex at Pohang Light Source Facility (PLS-II)”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOCS4, pp. 772-774. 
[n]	A. V. Tyukhtin, E. S. Belonogaya, S. N. Galyamin, and V. V. Vorobev, “Development of Methods for Calculation of Bunch Radiation in Presence of Dielectric Objects”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2274-2276. doi:10.18429/JACoW-IPAC2019-WEYYPLS3
[n]	K. Goldammer, M. Abo-Bakr, R. Follath, and A. Meseck, “Prospects of the BESSY High-Energy FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP002, pp. XX-XX. 
[n]	H. Fukuma, “Beam Instrumentation in SuperKEKB”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 164-167. doi:10.18429/JACoW-eeFACT2016-WET1H3
[n]	R. Nagaoka et al., “Orbit Correction in ELETTRA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1009-1012. 
[n]	X. Y. Zhang et al., “Design of a HOM-Damped 166.6 MHz Compact Quarter-Wave Beta=1 Superconducting Cavity for High Energy Photon Source”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 278. doi:10.18429/JACoW-SRF2021-MOPCAV010
[n]	J. Chavanne, P. Elleaume, and P. Van Vaerenbergh, “Recent Developments of Insertion Devices at the ESRF”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA20, pp. 2662-2664. 
[n]	Y. Luo, W. Fischer, T. Roser, V. Schoefer, and C. M. Zimmer, “Local 3Qy Betatron Resonance Correction in the 2012 RHIC 250 GeV Run”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA081, pp. 2696-2698. 
[n]	S. C. Kim et al., “A Beam Position Monitor System for Beam Transport Line (BTL) at the PLS”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15019, pp. XX-XX. 
[n]	S. Reimann, M. Droba, O. Meusel, and H. Podlech, “An Algorithm for Automated Lattice Design of Transfer Lines”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 127-130. doi:10.18429/JACoW-IPAC2019-MOPGW023
[n]	R. Miyamoto, A. Jansson, S. E. Kopp, and M. J. Syphers, “Tevatron Optics Measurements using an AC Dipole”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN102, pp. 3465-3467. 
[n]	C. Fortgang et al., “Longitudinal Beam Dynamics of a 5 MeV DTL - A Comparison of Theory and Experiment”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-48, pp. 167-169. 
[n]	H. J. Yao, X. Guan, G. R. Li, X. W. Wang, Q. Z. Xing, and S. X. Zheng, “H- Charge Exchange Injection for XiPAF Synchrotron”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 49-51. doi:10.18429/JACoW-HB2016-MOPR004
[n]	Y. Fang, P. Muggli, and W. B. Mori, “Possibility of Confirming SMI through Energy Spectrum with the 1nC ATF Electron Bunch”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC49, pp. 171-173. 
[n]	E. R. Moog, M. Abliz, R. J. Dejus, J. H. Grimmer, and M. S. Jaski, “Design of a 17.2-mm-Period Planar Undulator for the APS”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM10, pp. 1067-1069. 
[n]	S. H. Nam, S. H. Jeong, and I. S. Ko, “Operating Characteristics of the PLS Injection Kicker Modulator”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D076, pp. 588-592. 
[n]	P. Lotrus et al., “Status of the GBAR control project at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 531-533. doi:10.18429/JACoW-ICALEPCS2017-TUPHA059
[n]	J. Chavanne, P. Elleaume, and P. Van Vaerenbergh, “Recent Developments of Insertion Devices at ESRF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P026, pp. 3506-3508. 
[n]	R. L. Sheffield, “High-Brightness Electron Injectors:  A Review”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1098-1103. 
[n]	D. F. Ratner, A. Chao, and Y. Jiao, “Steady State Microbunching for High Brilliance and High Repetition Rate Storage Ring-based Light Sources”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THPD50, pp. 646-649. 
[n]	N. Savard, P. Muggli, and J. Vieira, “Effect of Proton Bunch Parameter Variation on AWAKE”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 684-686. doi:10.18429/JACoW-NAPAC2016-WEPOA01
[n]	S. N. Galyamin, A. V. Tyukhtin, and V. V. Vorobev, “Cherenkov Radiation at Off-Axis Bunch Passage Through Dielectric Concentrator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 225-227. doi:10.18429/JACoW-IPAC2019-MOPGW060
[n]	Y.-T. Li et al., “The design of DC power bus bar for solid state power amplifier in NSRRC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3611-3612. doi:10.18429/JACoW-IPAC2023-WEPM020
[n]	S. M. Wei, S. An, L. L. Guan, and Y. L. Lv, “A 50 MeV Proton Beam Line Design”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 45-47. doi:10.18429/JACoW-CYCLOTRONS2019-MOP010
[n]	M. Fouaidy, “Low Temperature Thermal Conductivity of Niobium and Materials for SRF Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 144-147. doi:10.18429/JACoW-SRF2019-MOP040
[n]	M. Vogt and J. Zemella, “A New 2nd Bunch Compression Chicane for the FLASH2020+ Project”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1618-1621. doi:10.18429/JACoW-IPAC2021-TUPAB102
[n]	T. Kamitani et al., “Positron Injector Linac Upgrade for SuperKEKB”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB002, pp. 177-179. 
[n]	W. Fischer et al., “Beam Lifetime and Emittance Growth Measurements of Gold Beams in RHIC at Storage”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPA003, pp. 21-23. 
[n]	D. Xiang, “Accelerator Based Ultrafast Electron Diffraction and Microscopy at SJTU”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper WEPMH5, pp. 26-28. 
[n]	B. Mustapha et al., “Alternative Design for the RISP Pre-Stripper Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 531-534. doi:10.18429/JACoW-LINAC2016-TUPLR028
[n]	G. Besnier, J. Jacob, P. Kernel, R. Nagaoka, J.-L. Revol, and A. Ropert, “Experimental and Theoretical Studies of Transverse Single Bunch Instabilities at ESRF”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP05G, pp. 999-1001. 
[n]	C. Johnstone, R. B. Agustsson, S. Boucher, S. V. Kutsaev, R. C. Lanza, and A. Yu. Smirnov, “A 15-Mev/nucleon Iso-Cyclotron for Security and Radioisotope Production”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 223-226. doi:10.18429/JACoW-CYCLOTRONS2019-TUP029
[n]	H. Sakai, T. Furuya, M. Sawamura, K. Shinoe, T. Takahashi, and K. Umemori, “Cavity Diagnostics Using Rotating Mapping System for L-band ERL Superconducting Cavity”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP153, pp. 907-909. 
[n]	S. Fukuda et al., “Status of RF Sources in Super-Conducting RF Test Facility (STF) at KEK”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP086, pp. 1032-1034. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search