Favourites
For Word
[n] M. A. Lyalin, I. Koop, and D. B. Shwartz, “Nonlinear Correctors Tuning for the Collector Ring Isochronous Mode”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2218-2220. doi:10.18429/JACoW-IPAC2021-TUPAB311
[n] M. Klein, N. Hiller, A.-S. M??ller, K. G. Sonnad, and P. F. Tavares, “Analysis of THz spectra and bunch deformation caused by CSR at ANKA”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD005, pp. 1925-1927.
[n] M. A. G. Johansson, Y. Cai, and V. Yakimenko, “SLAC FACET-II Positron Damping Ring Magnet Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1154-1156. doi:10.18429/JACoW-IPAC2016-TUPMB021
[n] K. Prelec, J. Alessi, and A. Hershcovitch, “EBIS Option for the Relativistic Heavy Ion Collider - RHIC”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1435-1438.
[n] A. Sheng, C. M. Cheng, C. K. Kuan, and D. Shu, “Design and Analysis of EPU XBPM in TPS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR050, pp. 894-896.
[n] K. Mihara, D. Kayran, V. Litvinenko, T. A. Miller, and I. Pinayev, “Emittance Measurements and Simulations in 112 MHz Super-Conducting RF Electron Gun With CsK2Sb Photo-Cathode”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3921-3923. doi:10.18429/JACoW-IPAC2017-THPAB087
[n] M. Eriksson, G. LeBlanc, and E. Wall?®n, “The MAX Wiggler”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A20, pp. 2334-2336.
[n] M. Hu et al., “Beam Profile Measurement with Flying Wires at the Fermilab Recycler Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT031, pp. 2182-2184.
[n] G. A. Fatkin et al., “New VME-Based Hardware for Automation in BINP”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1294-1297. doi:10.18429/JACoW-ICALEPCS2017-THMPL10
[n] M. A. G. Johansson, “Design of the MAX IV/Solaris 1.5 GeV Storage Ring Magnets”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO016, pp. 2430-2432.
[n] S. Dahlgren et al., “Conversion Studies for the Uppsala Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper B-04, pp. 127-131.
[n] A.-S. M??ller et al., “Characterizing THz Coherent Synchrotron Radiation at the ANKA Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC046, pp. 2091-2093.
[n] J. H. Bj?Ârklund Svensson and M. A. G. Johansson, “Relative Alignment Within the MAX IV 3 GeV Storage Ring Magnet Blocks”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 57-59. doi:10.18429/JACoW-IPAC2015-MOAD3
[n] R. Thurman-Keup, S. De Santis, E. Lorman, T. Meyer, and S. Pordes, “Measurement of the Intensity of the Beam in the Abort Gap at the Tevatron Utilizing Synchrotron Light”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT036, pp. 2440-2442.
[n] I. Pinayev, “Monitoring Beam Position in the Multibeam Accelerators”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper WG405, pp. 69-71.
[n] C. Hauviller, P. M. Ivanov, A. Poncet, Ph. Sacr?®, and Ph. Trilhe, “The Electrical Distribution Feed Box for the LHC Prototype Cell”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A06, pp. 2217-2219.
[n] G. LeBlanc, Å. Andersson, M. Eriksson, M. Georgsson, L.-J. Lindgren, and S. Werin, “The MAX-III Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH015, pp. 2474-2475.
[n] D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4096-4099. doi:10.18429/JACoW-IPAC2017-THPAB154
[n] A.-S. M??ller, S. Casalbuoni, M. Fitterer, E. Huttel, Y.-L. Mathis, and M. T. Schmelling, “Modeling the Shape of Coherent THz Pulses Emitted by Short Bunches in an Electron Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC047, pp. 2094-2096.
[n] B. Kalantari, T. Korhonen, A. L??deke, and C. Quitmann, “Enhancements of Top-up Operation at the Swiss Light Source”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF006, pp. 309-311.
[n] I. Pinayev and M. G. Fedurin, “On the Optimal Number of Eigenvectors for Orbit Correction”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC131, pp. 3295-3296.
[n] M. Nedos, N. Pupeter, V. Wied, B. Keune, C. Quitmann, and G. Blokesch, “High-efficiency industrial 130 kW cw solid-state RF amplifier for 1.3 GHz”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3590-3592. doi:10.18429/JACoW-IPAC2023-WEPM010
[n] W. Schappert, E. Lorman, M. C. Ross, V. Scarpine, J. Sebek, and T. Straumann, “Digital Down Conversion Technology for Tevatron Beam Line Tuner at FNAL”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB039, pp. 2494-2496.
[n] E. Huttel, I. Birkel, A.-S. Muller, and P. Wesolowski, “Investigation of the Injection into the ANKA Storage Ring by a Turn by Turn BPM System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN021, pp. 3958-3960.
[n] I. Birkel, E. Huttel, A.-S. Muller, and P. Wesolowski, “Investigation of Machine Operation and Related Radiation Dose at the ANKA Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN022, pp. 197-199.
[n] M. G. Fedurin and I. Pinayev, “Coupling Correction in NSLS X-ray Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC129, pp. 3290-3291.
[n] I. Birkel, E. Huttel, A.-S. M??ller, N. J. Smale, and P. Wesolowski, “Energy Dependent Measurements of Gamma and Neutron Dose at ANKA”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD018, pp. 484-486.
[n] T. A. Miller et al., “Multifunction Instrument Designs with Low Impedance Structures for Profile, Energy, and Emittance Measurements for LEReC at BNL”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 307-312. doi:10.18429/JACoW-IBIC2015-TUPB007
[n] G. A. Fatkin et al., “LIA-20 Control System Project”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1485-1488. doi:10.18429/JACoW-ICALEPCS2017-THPHA052
[n] D. B. Shwartz, I. Koop, E. Perevedentsev, Yu. A. Rogovsky, and M. V. Timoshenko, “Injection Region Probing by Beam at VEPP-2000 Storage Ring”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 203-206. doi:10.18429/JACoW-RUPAC2018-TUPSA27
[n] D. Horan, A. Nassiri, and C. Schwartz, “Phase Loop Bandwidth Measurements on the Advanced Photon Source 352-MHz RF Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P017, pp. 3111-3113.
[n] D. M. Gassner, V. Litvinenko, R. J. Michnoff, T. A. Miller, M. G. Minty, and I. Pinayev, “Coherent Electron Cooling Proof of Principle Instrumentation Design”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper WEAP01, pp. 231-234.
For LaTeX
Use Complete Form
For BibTeX
References
- M. A. Lyalin, I. Koop, and D. B. Shwartz, “Nonlinear Correctors Tuning for the Collector Ring Isochronous Mode”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2218-2220.
- M. Klein, N. Hiller, A.-S. M??ller, K. G. Sonnad, and P. F. Tavares, “Analysis of THz spectra and bunch deformation caused by CSR at ANKA”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD005, pp. 1925-1927.
- M. A. G. Johansson, Y. Cai, and V. Yakimenko, “SLAC FACET-II Positron Damping Ring Magnet Design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1154-1156.
- K. Prelec, J. Alessi, and A. Hershcovitch, “EBIS Option for the Relativistic Heavy Ion Collider - RHIC”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1435-1438.
- A. Sheng, C. M. Cheng, C. K. Kuan, and D. Shu, “Design and Analysis of EPU XBPM in TPS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR050, pp. 894-896.
- K. Mihara, D. Kayran, V. Litvinenko, T. A. Miller, and I. Pinayev, “Emittance Measurements and Simulations in 112 MHz Super-Conducting RF Electron Gun With CsK2Sb Photo-Cathode”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3921-3923.
- M. Eriksson, G. LeBlanc, and E. Wall?®n, “The MAX Wiggler”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A20, pp. 2334-2336.
- M. Hu et al., “Beam Profile Measurement with Flying Wires at the Fermilab Recycler Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT031, pp. 2182-2184.
- G. A. Fatkin et al., “New VME-Based Hardware for Automation in BINP”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1294-1297.
- M. A. G. Johansson, “Design of the MAX IV/Solaris 1.5 GeV Storage Ring Magnets”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPO016, pp. 2430-2432.
- S. Dahlgren et al., “Conversion Studies for the Uppsala Synchro-Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper B-04, pp. 127-131.
- A.-S. M??ller et al., “Characterizing THz Coherent Synchrotron Radiation at the ANKA Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC046, pp. 2091-2093.
- J. H. Bj?Ârklund Svensson and M. A. G. Johansson, “Relative Alignment Within the MAX IV 3 GeV Storage Ring Magnet Blocks”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 57-59.
- R. Thurman-Keup, S. De Santis, E. Lorman, T. Meyer, and S. Pordes, “Measurement of the Intensity of the Beam in the Abort Gap at the Tevatron Utilizing Synchrotron Light”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT036, pp. 2440-2442.
- I. Pinayev, “Monitoring Beam Position in the Multibeam Accelerators”, in Proc. 53th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'13), Novosibirsk, Russia, Sep. 2013, paper WG405, pp. 69-71.
- C. Hauviller, P. M. Ivanov, A. Poncet, Ph. Sacr?®, and Ph. Trilhe, “The Electrical Distribution Feed Box for the LHC Prototype Cell”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A06, pp. 2217-2219.
- G. LeBlanc, Å. Andersson, M. Eriksson, M. Georgsson, L.-J. Lindgren, and S. Werin, “The MAX-III Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH015, pp. 2474-2475.
- D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4096-4099.
- A.-S. M??ller, S. Casalbuoni, M. Fitterer, E. Huttel, Y.-L. Mathis, and M. T. Schmelling, “Modeling the Shape of Coherent THz Pulses Emitted by Short Bunches in an Electron Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC047, pp. 2094-2096.
- B. Kalantari, T. Korhonen, A. L??deke, and C. Quitmann, “Enhancements of Top-up Operation at the Swiss Light Source”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF006, pp. 309-311.
- I. Pinayev and M. G. Fedurin, “On the Optimal Number of Eigenvectors for Orbit Correction”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC131, pp. 3295-3296.
- M. Nedos, N. Pupeter, V. Wied, B. Keune, C. Quitmann, and G. Blokesch, “High-efficiency industrial 130 kW cw solid-state RF amplifier for 1.3 GHz”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM010, pp. 3590-3592.
- W. Schappert, E. Lorman, M. C. Ross, V. Scarpine, J. Sebek, and T. Straumann, “Digital Down Conversion Technology for Tevatron Beam Line Tuner at FNAL”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB039, pp. 2494-2496.
- E. Huttel, I. Birkel, A.-S. Muller, and P. Wesolowski, “Investigation of the Injection into the ANKA Storage Ring by a Turn by Turn BPM System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN021, pp. 3958-3960.
- I. Birkel, E. Huttel, A.-S. Muller, and P. Wesolowski, “Investigation of Machine Operation and Related Radiation Dose at the ANKA Storage Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN022, pp. 197-199.
- M. G. Fedurin and I. Pinayev, “Coupling Correction in NSLS X-ray Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC129, pp. 3290-3291.
- I. Birkel, E. Huttel, A.-S. M??ller, N. J. Smale, and P. Wesolowski, “Energy Dependent Measurements of Gamma and Neutron Dose at ANKA”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD018, pp. 484-486.
- T. A. Miller et al., “Multifunction Instrument Designs with Low Impedance Structures for Profile, Energy, and Emittance Measurements for LEReC at BNL”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 307-312.
- G. A. Fatkin et al., “LIA-20 Control System Project”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1485-1488.
- D. B. Shwartz, I. Koop, E. Perevedentsev, Yu. A. Rogovsky, and M. V. Timoshenko, “Injection Region Probing by Beam at VEPP-2000 Storage Ring”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 203-206.
- D. Horan, A. Nassiri, and C. Schwartz, “Phase Loop Bandwidth Measurements on the Advanced Photon Source 352-MHz RF Systems”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P017, pp. 3111-3113.
- D. M. Gassner, V. Litvinenko, R. J. Michnoff, T. A. Miller, M. G. Minty, and I. Pinayev, “Coherent Electron Cooling Proof of Principle Instrumentation Design”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper WEAP01, pp. 231-234.
Back to search