Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Novokhatski and M. Zobov, “Longitudinal Beam Stability in the Super B-Factory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP085, pp. 4737-4739.
[n] S. B. Vorozhtsov, B. I. Zamolodchikov, and N. L. Zaplatin, “The Magnetic System of the Monoenergetic Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69D19, pp. XX-XX.
[n] S. Yamaguchi, “Design of Input and Output Couplers for Linear Accelerator Structures”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP11, pp. 346-348.
[n] T. W. Koeth, B. L. Beaudoin, S. Bernal, I. Haber, R. A. Kishek, and P. G. O, “Bunch-End Interpenetration During Evolution to Longitudinal Uniformity in a Space-Charge-Dominated Storage Ring”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOBS3, pp. 22-26.
[n] D. Gu et al., “Beam-based Alignment Simulation on Flash-I Undulator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO030, pp. 1940-1942.
[n] R. Calaga et al., “Beam Losses Due to Abrupt Crab Cavity Failures in the LHC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOODN4, pp. 76-78.
[n] X. Zhou, T. Natsui, Y. Ogawa, and M. Yoshida, “Ytterbium Fiber Laser System of DAW RF Gun for SuperKEKB”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD056, pp. 2648-2650.
[n] K. R. Shin, A. E. Fathy, and Y. W. Kang, “Double-Gap Rebuncher Cavity Design of SNS MEBT”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP069, pp. 3898-3900.
[n] M. Kase, Y. Oikawa, M. Saito, I. Takeshita, Y. Yano, and I. Yokoyama, “Beam Diagnostic Equipments for RIKEN Ring Cyclotron and Its Beam Lines”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I5-01, pp. 443-446.
[n] G. Lambert et al., “Seeding the FEL of the SCSS Test Accelerator with the 5th Harmonic of a Ti: Sa Laser Produced in Gases”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC018, pp. 109-111.
[n] T. Goetsch, J. Feikes, M. Ries, G. Wuestefeld, and A.-S. Mueller, “Lifetime Studies at Metrology Light Source and ANKA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA012, pp. 88-90.
[n] V. L. Smirnov and S. B. Vorozhtsov, “A Cyclotron Complex for Acceleration of Carbon Ions”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 467-470. doi:10.18429/JACoW-RUPAC2016-WEPSB046
[n] P. O. Schmid, D. B. Engel, J. Feikes, M. Ries, and G. Wuestefeld, “Mitigating the Pertubations Caused by U 180 at the Metrology Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC012, pp. 2930-2932.
[n] A. Semenov et al., “Schottky Diode Detectors for Monitoring Coherent THz Synchrotron Radiation Pulses”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3465-3467. doi:10.18429/JACoW-IPAC2014-THPME097
[n] S. W. Lee, M. S. Champion, and Y. W. Kang, “Study of Pretuning and High Power Test of DTL Iris Waveguide Couplers Using a Single Cell Cavity”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 522-524. doi:10.18429/JACoW-IPAC2016-MOPMY005
[n] J. N. Corlett and R. O. Hettel, “Performance Requirements and Metrics for Future X-Ray Sources”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP038, pp. 1177-1179.
[n] F. Sannibale et al., “Status of the APEX Project at LBNL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEEPPB004, pp. 2173-2175.
[n] P. J. Giansiracusa, M. J. Boland, M. P. Lafky, T. G. Lucas, R. P. Rassool, and M. Volpi, “The Effect of the SLED Installation on Extracted and Lost Beam at the Australian Synchrotron Linac.”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2794-2797. doi:10.18429/JACoW-IPAC2019-WEPRB001
[n] G. M. Kazakevich et al., “A Two-stage Injection-locked Magnetron for Accelerators with Superconducting Cavities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC059, pp. 2348-2350.
[n] S. Chen, N. Nakamura, M. Shimada, D. Zhou, S. Huang, and K. X. Liu, “Transverse Multi-Pass Beam Breakup Simulation for KEK ERL Light Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 248-250. doi:10.18429/JACoW-IPAC2015-MOPWA056
[n] A. K. Krasnykh, “Overview of Driver Technologies for Nanosecond TEM Kickers”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3645-3647. doi:10.18429/JACoW-IPAC2016-THPMW042
For LaTeX
Use Complete Form
For BibTeX
References
- A. Novokhatski and M. Zobov, “Longitudinal Beam Stability in the Super B-Factory”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP085, pp. 4737-4739.
- S. B. Vorozhtsov, B. I. Zamolodchikov, and N. L. Zaplatin, “The Magnetic System of the Monoenergetic Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69D19, pp. XX-XX.
- S. Yamaguchi, “Design of Input and Output Couplers for Linear Accelerator Structures”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP11, pp. 346-348.
- T. W. Koeth, B. L. Beaudoin, S. Bernal, I. Haber, R. A. Kishek, and P. G. O, “Bunch-End Interpenetration During Evolution to Longitudinal Uniformity in a Space-Charge-Dominated Storage Ring”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOOBS3, pp. 22-26.
- D. Gu et al., “Beam-based Alignment Simulation on Flash-I Undulator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO030, pp. 1940-1942.
- R. Calaga et al., “Beam Losses Due to Abrupt Crab Cavity Failures in the LHC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOODN4, pp. 76-78.
- X. Zhou, T. Natsui, Y. Ogawa, and M. Yoshida, “Ytterbium Fiber Laser System of DAW RF Gun for SuperKEKB”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD056, pp. 2648-2650.
- K. R. Shin, A. E. Fathy, and Y. W. Kang, “Double-Gap Rebuncher Cavity Design of SNS MEBT”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP069, pp. 3898-3900.
- M. Kase, Y. Oikawa, M. Saito, I. Takeshita, Y. Yano, and I. Yokoyama, “Beam Diagnostic Equipments for RIKEN Ring Cyclotron and Its Beam Lines”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I5-01, pp. 443-446.
- G. Lambert et al., “Seeding the FEL of the SCSS Test Accelerator with the 5th Harmonic of a Ti: Sa Laser Produced in Gases”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC018, pp. 109-111.
- T. Goetsch, J. Feikes, M. Ries, G. Wuestefeld, and A.-S. Mueller, “Lifetime Studies at Metrology Light Source and ANKA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA012, pp. 88-90.
- V. L. Smirnov and S. B. Vorozhtsov, “A Cyclotron Complex for Acceleration of Carbon Ions”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 467-470.
- P. O. Schmid, D. B. Engel, J. Feikes, M. Ries, and G. Wuestefeld, “Mitigating the Pertubations Caused by U 180 at the Metrology Light Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC012, pp. 2930-2932.
- A. Semenov et al., “Schottky Diode Detectors for Monitoring Coherent THz Synchrotron Radiation Pulses”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3465-3467.
- S. W. Lee, M. S. Champion, and Y. W. Kang, “Study of Pretuning and High Power Test of DTL Iris Waveguide Couplers Using a Single Cell Cavity”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 522-524.
- J. N. Corlett and R. O. Hettel, “Performance Requirements and Metrics for Future X-Ray Sources”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP038, pp. 1177-1179.
- F. Sannibale et al., “Status of the APEX Project at LBNL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEEPPB004, pp. 2173-2175.
- P. J. Giansiracusa, M. J. Boland, M. P. Lafky, T. G. Lucas, R. P. Rassool, and M. Volpi, “The Effect of the SLED Installation on Extracted and Lost Beam at the Australian Synchrotron Linac.”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2794-2797.
- G. M. Kazakevich et al., “A Two-stage Injection-locked Magnetron for Accelerators with Superconducting Cavities”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC059, pp. 2348-2350.
- S. Chen, N. Nakamura, M. Shimada, D. Zhou, S. Huang, and K. X. Liu, “Transverse Multi-Pass Beam Breakup Simulation for KEK ERL Light Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 248-250.
- A. K. Krasnykh, “Overview of Driver Technologies for Nanosecond TEM Kickers”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3645-3647.
Back to search