Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Chu, S. Chevtsov, G. B. Shen, and J. Wu, “Service Oriented Architecture for High Level Applications”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC072, pp. 1886-1888.
[n] G. W. Foster et al., “Beam Manipulation and Compression Using Broadband RF Systems in the Fermilab Main Injector and Recycler”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT149, pp. 1479-1481.
[n] M. Yoshida et al., “Re-acceleration of Ultra Cold Muon in J-PARC MLF”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2532-2534. doi:10.18429/JACoW-IPAC2015-WEPWA018
[n] P. H. Nallin et al., “The Sirius Heating System for the In-situ NEG Activation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4109-4111. doi:10.18429/JACoW-IPAC2019-THPTS004
[n] J. Apfelbaum et al., “LNLS Synchrotron Light Source Magnets”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP091G, pp. 2195-2197.
[n] Q. J. Xu, “High Field Superconducting Magnet Program for Accelerators in China”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4359-4360. doi:10.18429/JACoW-IPAC2019-FRXXPLM1
[n] R. Duperrier and D. Gorelov, “Instabilities Study and Implications for the RIA Project”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB035, pp. 2805-2807.
[n] A. K. Wald, K. Desch, D. Elsner, and D. Proft, “New Bunch-by-Bunch Filling Pattern Measuring System at ELSA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 244-246. doi:10.18429/JACoW-IPAC2022-MOPOPT009
[n] M. Liu, D. K. Liu, C. X. Yin, and L. Y. Zhao, “A New Timing System: the Real-time Synchronized Data Bus”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA032, pp. 1396-1398.
[n] C. A. Swoboda, R. E. Daniels, and A. W. Maschke, “Oscilloscope Waveform Digitizer”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 369-371.
[n] L. M. Earley, J. M. Potter, and A. J. Thomas, “Tuning Experience with FMIT Scale-Model Drift-Tube Linac”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B14, pp. 74-76.
[n] G. V. Dolbilov et al., “Status of SILUND-21 Linear Induction Accelerator Project”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 748-751.
[n] Z. Zhao, C. H. Wang, G. Lei, J. Zhao, K. J. Yue, and J. Liu, “Realization of Linux Platform in Distributed Control System by EPICS at BEPCII”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP525, pp. XX-XX.
[n] W. P. Johnson, H. G. Blosser, and P. Sigg, “Cyclotron Beam Pulser for Particle Time-of-flight Experiments”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69D06, pp. XX-XX.
[n] L. Calabretta et al., “New Design Issues of the EXCYT Project”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP038G, pp. 864-866.
[n] M. J. Barnes et al., “Beam Induced Ferrite Heating of the LHC Injection Kickers and Proposals for Improved Cooling”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA031, pp. 732-734.
[n] D. I. Kaltchev and E. A. Perelstein, “Gain Calculation for the Synchrotron Radiation Free Electron Maser”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 626-629.
[n] J. Jadlovsky et al., “A Novel General Purpose Data Acquisition Board with a DIM Interface”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1565-1568. doi:10.18429/JACoW-ICALEPCS2017-THPHA076
[n] J. Griffin, J. MacLachlan, A. G. Ruggiero, and K. Takayama, “Time and Momentum Exchange for Production and Collection of Intense Antiproton Beams at Fermilab”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2630-2633.
[n] G. V. Dolbilov et al., “Status of the Test Facility for Studies FEL Bunching Technique for CLIC Driving Beam”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP057G, pp. 730-732.
[n] P. Kneisel et al., “Investigation of Ingot Material with Large Grain for RF Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP58, pp. 382-382.
[n] M. Rojak, E. Shurina, Yu. Soloveichik, A. Grudiev, M. Tiunov, and P. Vobly, “MASTAC - New Code for Solving Three-Dimensional Non-linear Magnetostatic Problems”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPB09, pp. 2291-2293.
[n] M. Saveri Silva et al., “Four-Bounce Crystal Monochromators for the Sirius/LNLS Beamlines”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 29. doi:10.18429/JACoW-MEDSI2020-MOPB04
[n] H.-W. Glock, P. Huelsmann, H. Klein, M. Kurz, W. F. O. Mueller, and C. Peschke, “Mode Propagation in a Iris Type Accelerator Section Loaded with Single Heavily HOM-Damped Cells”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2155-2158.
[n] J. Dilly et al., “Status of the CERN optics measurement and correction analysis tools”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM012, unpublished.
[n] P. Denham, A. Fisher, P. Musumeci, and R. England, “Ultrafast electron diffraction with adjustable camera length at high energies”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR27, unpublished.
[n] D. H. An et al., “The Stripping Extraction System in the KIRAMS-13 Cyclotron”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15014, pp. XX-XX.
[n] J. Jacob et al., “Test of the SOLEIL Cryomodule Prototype with Beam at ESRF”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP22, pp. 82-85.
[n] Y. Fujita, Y. Kamiya, and T. Katsura, “Orbit Distortion Due to the Floor Displacement in the Light Source Building Under Climatic Thermal Stress”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2682-2685.
[n] H. D. Lancaster, S. B. Magyary, and R. C. Sah, “A High Performance Control System for a Heavy Ion Medical Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2311-2314.
[n] M. Rogge et al., “Stripping Injection of H2 and H- into COSY”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 417-420.
[n] Y. F. Liu et al., “Design a Precise Stability Controller for High Power Pulse Modulator Based on FPGA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3900-3903. doi:10.18429/JACoW-IPAC2019-THPRB041
[n] D. L. Friesel and J. W. Stetson, “Orbit Centering Studies of the IUCF Injector and Main Stage Cyclotrons”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B11, pp. 59-62.
[n] H. S. Marks et al., “Saturation Dynamics, Fine Spectrum, and Chirp Control in a CW FEL Oscillator”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 580-582. doi:10.18429/JACoW-FEL2015-WEB04
[n] P. J. Seweryn, M. Gonzalez-Berges, B. Schofield, and F. M. Tilaro, “Data Analytics Reporting Tool for CERN SCADA Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 456-460. doi:10.18429/JACoW-ICALEPCS2017-TUPHA035
[n] D. Mascali et al., “Innovative Schemes of Plasma Heating for Future Multiply-Charged Ions Sources: Modeling and Experimental Investigation”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 14-17. doi:10.18429/JACoW-ECRIS2016-MOCO01
[n] D. E. Lobb, “An Axi-Symmetric High Flux Muon Channel”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-16, pp. 2020-2023.
[n] G. P. Lawrence, “Transmutation and Energy Production with High Power Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FPD03, pp. 35-39.
[n] A. V. Perna et al., “The HD-DCM-Lite: A High-Dynamic DCM with Extended Scanning Capabilities for Sirius/LNLS Beamlines”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 203. doi:10.18429/JACoW-MEDSI2020-TUPC11
[n] R. Laxdal et al., “First Beam Test with the ISAC RFQ”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4009, pp. 783-785.
[n] M. Gonzalez Berges, J. Martinez Samblas, and J. Storey, “Using machine learning techniques for BGI-based profile measurements at the CERN PS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM010, unpublished.
[n] R. L. Geng, A. Crawford, G. Eremeev, and H. Padamsee, “Continuous Current Oscillation Electropolishing and Applications to Half-Cells”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP13, pp. 311-312.
[n] V. I. Moiseev and V. Korchuganov, “Em Fields in a Metal in an External Magnetic Field at Low Temperatures”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 340-342. doi:10.18429/JACoW-RUPAC2018-WEPSB28
[n] P. P. Goryl et al., “Tango Controls RFCs”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 317-321. doi:10.18429/JACoW-ICALEPCS2021-TUBL03
[n] D. T. Abell et al., “Thermal Modeling and Benchmarking of Crystalline Laser Amplifiers”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2921-2924. doi:10.18429/JACoW-IPAC2022-THPOTK062
[n] F. Bosco et al., “Wakefield studies for an ultra compact X-rays free electron laser”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPS48, unpublished.
[n] R. Petrocelli, D. Alloza, S. Blanch-Torn?â, and O. Matilla, “Upgrade of Control System of ALBA Main Booster Power Supplies”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1374-1376. doi:10.18429/JACoW-ICALEPCS2017-THPHA018
[n] M. Zelazny, T. Gromme, T. Himel, L. Hendrickson, and K. Krauter, “Recording PEP2 Ring Beam Losses at SLAC”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_001.
[n] M. Fedurin et al., “Operation the Accelerator Test Facility linac transport beamline by using Artificial Intelegence and Machine Learning Methods”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL016, unpublished.
[n] P. Huelsmann, H.-W. Glock, H. Klein, M. Kurz, W. F. O. Mueller, and C. Peschke, “Quality Factor Measurements in Cavities with Mode Overlap”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2209-2212.
[n] L. W. Lai, F. Z. Chen, Y. B. Leng, Y. B. Yan, N. Zhang, and J. Chen, “Design and Performance of Digital BPM Processor for DCLS and SXFEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 338-340. doi:10.18429/JACoW-IPAC2017-MOPAB092
[n] E. Peschardt and M. Studer, “Stochastic Cooling in the CERN ISR during ppbar Colliding Beam Physics”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2584-2587.
[n] J. Marcos, J. Campmany, V. Massana, R. Petrocelli, and L. R. M. Rib??, “New Small Diameter Rotating Coil Shaft for Characterizing New Generation of Multipolar Magnets”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4234-4236. doi:10.18429/JACoW-IPAC2019-THPTS057
[n] Y. Jiao, S. X. Fang, Q. Qin, J. Q. Wang, G. Xu, and D. M. Zhou, “Optimization Of The BEPCII Lattice With Frequency Map Analysis”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUC3H101, pp. 100-102.
[n] E. Haebel, “Beam Tube Couplers for the Superconducting LEP Cavity”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-19, pp. XX-XX.
[n] T. Yasui, “J-PARC operation with the high repetition rate upgrade”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1294-1298. doi:10.18429/JACoW-IPAC2023-TUXG1
[n] J. Y. Benitez, D. Leitner, C. M. Lyneis, and M. K. Covo, “Performance of the LBNL AECR-U with a TWTA”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUPOT008, pp. 133-133.
[n] S. Ikeda, K. Horioka, Y. Fuwa, M. Kumaki, T. Kanesue, and M. Okamura, “Control of Plasma Flux with Pulsed Solenoid for Laser Ion Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 601-603. doi:10.18429/JACoW-IPAC2014-MOPRI011
[n] I. Sato et al., “Accelerator Guide of Positron Generator Linac”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-26, pp. 499-501.
[n] S. Berry, A. Bouygues, J. Drant, A. Gonzalez-Moreau, C. Madec, and C. Servouin, “Cobotisation of ESS Cryomodule Assembly at CEA”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 438-441. doi:10.18429/JACoW-SRF2023-TUPTB024
[n] S. S. Chang, J. W. Lee, B. R. Park, S. C. Won, and J. C. Yun, “Real-time data Acquisition and Control System for the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP078L, pp. 1800-1802.
[n] O. Singh, S. Ramamoorthy, J. Sheehan, and J. Smith, “Upgrade of NSLS Timing System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA15, pp. 2223-2225.
[n] G. Carron, L. Faltin, W. Schnell, and L. Thorndahl, “Experiments with Stochastic Cooling in the ISR”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1402-1405.
[n] F. G. G. Garcia and W. Pellico, “FNAL Proton Source High Intensity Operations and Beam Loss Control”, in Proc. HB'12, Beijing, China, Sep. 2012, paper TUO3C02, pp. 320-323.
[n] L. G. Lewis and R. E. Timm, “A Telemetry System for the Zero Gradient Synchrotron (ZGS) Ion Source Terminal”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper F-8, pp. 579-590.
[n] T. Castellano, L. Bartoszek, J. McCarthy, J. Petter, and E. Tilles, “Kickers and Power Supplies for the Fermilab Tevatron I Antiproton Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3003-3006.
[n] R. L. Martin, “Comments on Superconducting Synchrotrons”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 632-634.
[n] J. Jacob et al., “Successful Beam Test of the HOM Free Superconducting SOLEIL Cavity Prototype at the ESRF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB057, pp. 1332-1334.
[n] S. Q. Tian, H. H. Li, X. Y. Sun, M. Z. Zhang, and W. Z. Zhang, “A Design Approach of the Beam Optics in the Complex Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA048, pp. 2597-2599.
[n] M. Pereira, M. Lamont, G. J. M??ller, D. D. Teixeira, T. E. Lahey, and E. S. M. McCrory, “LHC Supertable”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN002, pp. 86-89.
[n] Th. Stammbach, “Experience with the High Current Operation of the PSI Cyclotron Facility (Invited Paper)”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-04, pp. 28-35.
[n] Th. Stammbach, “The 2mA PSI Beam and Future Applications”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper A-2, pp. XX-XX.
[n] M. Saveri Silva, R. R. Geraldes, A. Gilmour, T. A. M. Ruijl, and R. M. Schneider, “Thermal Management and Crystal Clamping Concepts for the New High-Dynamics DCM for Sirius”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 194-197. doi:10.18429/JACoW-MEDSI2016-TUPE15
[n] A. V. Eliseev et al., “Dynamics of 197Au78+ Ions Generated in Recombination with Cooling Electrons in the NICA Collider”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA016, pp. 275-277.
[n] Y. Fujita et al., “First Observation of Micro-Bunch Structure of the 100 MHz HIMAC-Injector Linac Beam by a Thin SEEM”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP32F, pp. 1503-1505.
[n] S. V. Milton and J. A. Carwardine, “Ramp Tuning of the APS Booster Synchrotron Magnet Power Supplies”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ18, pp. 2708-2710.
[n] J. Rahighi, E. Salimi, R. safian, M. Jafarzadeh, and Kh. S. Sarhadi, “Third Generation Light Source Project in Iran”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC023, pp. 2954-2956.
[n] B. W. Littmann, M. H. Bairu, and H. Henke, “A mm-Wave Coupler Design”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2019-2022.
[n] T. Yasui, “Space Charge Induced Resonances and Suppression in J-PARC MR”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 222-227. doi:10.18429/JACoW-HB2023-WEA2I2
[n] E. V. Kaportsev et al., “Modernization of the Automated Control System in the Kurchatov Synchrotron Radiation Source”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD052, pp. 659-661.
[n] L. Mekinda et al., “Securing Light Source SCADA Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1142-1148. doi:10.18429/JACoW-ICALEPCS2017-THBPA02
For LaTeX
Use Complete Form
For BibTeX
References
- P. Chu, S. Chevtsov, G. B. Shen, and J. Wu, “Service Oriented Architecture for High Level Applications”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC072, pp. 1886-1888.
- G. W. Foster et al., “Beam Manipulation and Compression Using Broadband RF Systems in the Fermilab Main Injector and Recycler”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT149, pp. 1479-1481.
- M. Yoshida et al., “Re-acceleration of Ultra Cold Muon in J-PARC MLF”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2532-2534.
- P. H. Nallin et al., “The Sirius Heating System for the In-situ NEG Activation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4109-4111.
- J. Apfelbaum et al., “LNLS Synchrotron Light Source Magnets”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP091G, pp. 2195-2197.
- Q. J. Xu, “High Field Superconducting Magnet Program for Accelerators in China”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4359-4360.
- R. Duperrier and D. Gorelov, “Instabilities Study and Implications for the RIA Project”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB035, pp. 2805-2807.
- A. K. Wald, K. Desch, D. Elsner, and D. Proft, “New Bunch-by-Bunch Filling Pattern Measuring System at ELSA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 244-246.
- M. Liu, D. K. Liu, C. X. Yin, and L. Y. Zhao, “A New Timing System: the Real-time Synchronized Data Bus”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA032, pp. 1396-1398.
- C. A. Swoboda, R. E. Daniels, and A. W. Maschke, “Oscilloscope Waveform Digitizer”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 369-371.
- L. M. Earley, J. M. Potter, and A. J. Thomas, “Tuning Experience with FMIT Scale-Model Drift-Tube Linac”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B14, pp. 74-76.
- G. V. Dolbilov et al., “Status of SILUND-21 Linear Induction Accelerator Project”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 748-751.
- Z. Zhao, C. H. Wang, G. Lei, J. Zhao, K. J. Yue, and J. Liu, “Realization of Linux Platform in Distributed Control System by EPICS at BEPCII”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP525, pp. XX-XX.
- W. P. Johnson, H. G. Blosser, and P. Sigg, “Cyclotron Beam Pulser for Particle Time-of-flight Experiments”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69D06, pp. XX-XX.
- L. Calabretta et al., “New Design Issues of the EXCYT Project”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP038G, pp. 864-866.
- M. J. Barnes et al., “Beam Induced Ferrite Heating of the LHC Injection Kickers and Proposals for Improved Cooling”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA031, pp. 732-734.
- D. I. Kaltchev and E. A. Perelstein, “Gain Calculation for the Synchrotron Radiation Free Electron Maser”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 626-629.
- J. Jadlovsky et al., “A Novel General Purpose Data Acquisition Board with a DIM Interface”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1565-1568.
- J. Griffin, J. MacLachlan, A. G. Ruggiero, and K. Takayama, “Time and Momentum Exchange for Production and Collection of Intense Antiproton Beams at Fermilab”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2630-2633.
- G. V. Dolbilov et al., “Status of the Test Facility for Studies FEL Bunching Technique for CLIC Driving Beam”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP057G, pp. 730-732.
- P. Kneisel et al., “Investigation of Ingot Material with Large Grain for RF Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP58, pp. 382-382.
- M. Rojak, E. Shurina, Yu. Soloveichik, A. Grudiev, M. Tiunov, and P. Vobly, “MASTAC - New Code for Solving Three-Dimensional Non-linear Magnetostatic Problems”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPB09, pp. 2291-2293.
- M. Saveri Silva et al., “Four-Bounce Crystal Monochromators for the Sirius/LNLS Beamlines”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 29.
- H.-W. Glock, P. Huelsmann, H. Klein, M. Kurz, W. F. O. Mueller, and C. Peschke, “Mode Propagation in a Iris Type Accelerator Section Loaded with Single Heavily HOM-Damped Cells”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2155-2158.
- J. Dilly et al., “Status of the CERN optics measurement and correction analysis tools”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM012, this conference.
- P. Denham, A. Fisher, P. Musumeci, and R. England, “Ultrafast electron diffraction with adjustable camera length at high energies”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR27, unpublished.
- D. H. An et al., “The Stripping Extraction System in the KIRAMS-13 Cyclotron”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP15014, pp. XX-XX.
- J. Jacob et al., “Test of the SOLEIL Cryomodule Prototype with Beam at ESRF”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP22, pp. 82-85.
- Y. Fujita, Y. Kamiya, and T. Katsura, “Orbit Distortion Due to the Floor Displacement in the Light Source Building Under Climatic Thermal Stress”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2682-2685.
- H. D. Lancaster, S. B. Magyary, and R. C. Sah, “A High Performance Control System for a Heavy Ion Medical Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2311-2314.
- M. Rogge et al., “Stripping Injection of H2 and H- into COSY”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 417-420.
- Y. F. Liu et al., “Design a Precise Stability Controller for High Power Pulse Modulator Based on FPGA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3900-3903.
- D. L. Friesel and J. W. Stetson, “Orbit Centering Studies of the IUCF Injector and Main Stage Cyclotrons”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B11, pp. 59-62.
- H. S. Marks et al., “Saturation Dynamics, Fine Spectrum, and Chirp Control in a CW FEL Oscillator”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 580-582.
- P. J. Seweryn, M. Gonzalez-Berges, B. Schofield, and F. M. Tilaro, “Data Analytics Reporting Tool for CERN SCADA Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 456-460.
- D. Mascali et al., “Innovative Schemes of Plasma Heating for Future Multiply-Charged Ions Sources: Modeling and Experimental Investigation”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 14-17.
- D. E. Lobb, “An Axi-Symmetric High Flux Muon Channel”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper B-16, pp. 2020-2023.
- G. P. Lawrence, “Transmutation and Energy Production with High Power Accelerators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FPD03, pp. 35-39.
- A. V. Perna et al., “The HD-DCM-Lite: A High-Dynamic DCM with Extended Scanning Capabilities for Sirius/LNLS Beamlines”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 203.
- R. Laxdal et al., “First Beam Test with the ISAC RFQ”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4009, pp. 783-785.
- M. Gonzalez Berges, J. Martinez Samblas, and J. Storey, “Using machine learning techniques for BGI-based profile measurements at the CERN PS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM010, this conference.
- R. L. Geng, A. Crawford, G. Eremeev, and H. Padamsee, “Continuous Current Oscillation Electropolishing and Applications to Half-Cells”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP13, pp. 311-312.
- V. I. Moiseev and V. Korchuganov, “Em Fields in a Metal in an External Magnetic Field at Low Temperatures”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 340-342.
- P. P. Goryl et al., “Tango Controls RFCs”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 317-321.
- D. T. Abell et al., “Thermal Modeling and Benchmarking of Crystalline Laser Amplifiers”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2921-2924.
- F. Bosco et al., “Wakefield studies for an ultra compact X-rays free electron laser”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS48, unpublished.
- R. Petrocelli, D. Alloza, S. Blanch-Torn?â, and O. Matilla, “Upgrade of Control System of ALBA Main Booster Power Supplies”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1374-1376.
- M. Zelazny, T. Gromme, T. Himel, L. Hendrickson, and K. Krauter, “Recording PEP2 Ring Beam Losses at SLAC”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_001.
- M. Fedurin et al., “Operation the Accelerator Test Facility linac transport beamline by using Artificial Intelegence and Machine Learning Methods”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL016, unpublished.
- P. Huelsmann, H.-W. Glock, H. Klein, M. Kurz, W. F. O. Mueller, and C. Peschke, “Quality Factor Measurements in Cavities with Mode Overlap”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2209-2212.
- L. W. Lai, F. Z. Chen, Y. B. Leng, Y. B. Yan, N. Zhang, and J. Chen, “Design and Performance of Digital BPM Processor for DCLS and SXFEL”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 338-340.
- E. Peschardt and M. Studer, “Stochastic Cooling in the CERN ISR during ppbar Colliding Beam Physics”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2584-2587.
- J. Marcos, J. Campmany, V. Massana, R. Petrocelli, and L. R. M. Rib??, “New Small Diameter Rotating Coil Shaft for Characterizing New Generation of Multipolar Magnets”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4234-4236.
- Y. Jiao, S. X. Fang, Q. Qin, J. Q. Wang, G. Xu, and D. M. Zhou, “Optimization Of The BEPCII Lattice With Frequency Map Analysis”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUC3H101, pp. 100-102.
- E. Haebel, “Beam Tube Couplers for the Superconducting LEP Cavity”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-19, pp. XX-XX.
- T. Yasui, “J-PARC operation with the high repetition rate upgrade”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUXG1, pp. 1294-1298.
- J. Y. Benitez, D. Leitner, C. M. Lyneis, and M. K. Covo, “Performance of the LBNL AECR-U with a TWTA”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper TUPOT008, pp. 133-133.
- S. Ikeda, K. Horioka, Y. Fuwa, M. Kumaki, T. Kanesue, and M. Okamura, “Control of Plasma Flux with Pulsed Solenoid for Laser Ion Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 601-603.
- I. Sato et al., “Accelerator Guide of Positron Generator Linac”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-26, pp. 499-501.
- S. Berry, A. Bouygues, J. Drant, A. Gonzalez-Moreau, C. Madec, and C. Servouin, “Cobotisation of ESS Cryomodule Assembly at CEA”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB024, pp. 438-441.
- S. S. Chang, J. W. Lee, B. R. Park, S. C. Won, and J. C. Yun, “Real-time data Acquisition and Control System for the PLS Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP078L, pp. 1800-1802.
- O. Singh, S. Ramamoorthy, J. Sheehan, and J. Smith, “Upgrade of NSLS Timing System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA15, pp. 2223-2225.
- G. Carron, L. Faltin, W. Schnell, and L. Thorndahl, “Experiments with Stochastic Cooling in the ISR”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1402-1405.
- F. G. G. Garcia and W. Pellico, “FNAL Proton Source High Intensity Operations and Beam Loss Control”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper TUO3C02, pp. 320-323.
- L. G. Lewis and R. E. Timm, “A Telemetry System for the Zero Gradient Synchrotron (ZGS) Ion Source Terminal”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper F-8, pp. 579-590.
- T. Castellano, L. Bartoszek, J. McCarthy, J. Petter, and E. Tilles, “Kickers and Power Supplies for the Fermilab Tevatron I Antiproton Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3003-3006.
- R. L. Martin, “Comments on Superconducting Synchrotrons”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 632-634.
- J. Jacob et al., “Successful Beam Test of the HOM Free Superconducting SOLEIL Cavity Prototype at the ESRF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB057, pp. 1332-1334.
- S. Q. Tian, H. H. Li, X. Y. Sun, M. Z. Zhang, and W. Z. Zhang, “A Design Approach of the Beam Optics in the Complex Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA048, pp. 2597-2599.
- M. Pereira, M. Lamont, G. J. M??ller, D. D. Teixeira, T. E. Lahey, and E. S. M. McCrory, “LHC Supertable”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN002, pp. 86-89.
- Th. Stammbach, “Experience with the High Current Operation of the PSI Cyclotron Facility (Invited Paper)”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-04, pp. 28-35.
- Th. Stammbach, “The 2mA PSI Beam and Future Applications”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper A-2, pp. XX-XX.
- M. Saveri Silva, R. R. Geraldes, A. Gilmour, T. A. M. Ruijl, and R. M. Schneider, “Thermal Management and Crystal Clamping Concepts for the New High-Dynamics DCM for Sirius”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 194-197.
- A. V. Eliseev et al., “Dynamics of 197Au78+ Ions Generated in Recombination with Cooling Electrons in the NICA Collider”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper MOPPA016, pp. 275-277.
- Y. Fujita et al., “First Observation of Micro-Bunch Structure of the 100 MHz HIMAC-Injector Linac Beam by a Thin SEEM”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP32F, pp. 1503-1505.
- S. V. Milton and J. A. Carwardine, “Ramp Tuning of the APS Booster Synchrotron Magnet Power Supplies”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ18, pp. 2708-2710.
- J. Rahighi, E. Salimi, R. safian, M. Jafarzadeh, and Kh. S. Sarhadi, “Third Generation Light Source Project in Iran”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC023, pp. 2954-2956.
- B. W. Littmann, M. H. Bairu, and H. Henke, “A mm-Wave Coupler Design”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2019-2022.
- T. Yasui, “Space Charge Induced Resonances and Suppression in J-PARC MR”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEA2I2, pp. 222-227.
- E. V. Kaportsev et al., “Modernization of the Automated Control System in the Kurchatov Synchrotron Radiation Source”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPD052, pp. 659-661.
- L. Mekinda et al., “Securing Light Source SCADA Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1142-1148.
Back to search