Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. F. Wu et al., “Preliminary Research of HLS II BLM System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 190-192. doi:10.18429/JACoW-IPAC2016-MOPMB043
[n] G. Gulbekyan, B. Gikal, I. Kalagin, and N. Kazarinov, “Status Report and Future Development FLNR JINR Heavy Ions Accelerator Complex”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TU-08, pp. 59-63.
[n] I. Bustinduy et al., “Beam Dynamics Simulations for the ESS-Bilbao H- Ion Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC023, pp. 2052-2054.
[n] T. Honma et al., “Present Status of HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A02, pp. 2557-2559.
[n] J. Faure, J. L. Lemaire, and R. Vienet, “The 3 Preinjectors of MIMAS for Heavy Ions Polarized and Unpolariezed Ions”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1072-1075.
[n] I. Bustinduy et al., “Low Energy Beam Transport Developments for the Bilbao Accelerator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP011, pp. 1522-1524.
[n] Y. Furukawa, M. Ishii, T. Nakatani, and T. Ohata, “Development of an Interpreter Program for an Equipment Control”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP033, pp. XX-XX.
[n] J.-Y. Hwang, J. H. Chen, W. K. Lau, A. P. Lee, T. H. Wu, and N. Y. Huang, “A Low Energy Thermionic RF Gun Linac for Ultrashort Electron Beam”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC038, pp. 1081-1083.
[n] L. L. Tang et al., “Application of the Gige Vision Digital Camera for Beam Diagnostics in HLS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE032, pp. 1041-1043.
[n] D. Harryman et al., “Investigation of readout methods for electro-optical beam position monitor pickups”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 788-792. doi:10.18429/JACoW-IBIC2025-WEPMO26
[n] A. Stallwood, D. J. Butler, and G. M. A. Duller, “The Use of AM Technologies for HV and UHV Components and Vessels”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 114-117. doi:10.18429/JACoW-MEDSI2018-TUPH34
[n] R. Kato, K. Furuhashi, G. Isoyama, S. Kashiwagi, M. Morio, and Y. Terasawa, “Longitudinal Phase-space and Transverse Slice Emittance Measurements of High-brightness Electron Beams”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC21, pp. 293-296.
[n] G. L. Dorofeev, E. E. Donets, and V. M. Drobin, “The Influence of the Unclosed Superconducting Magnetic Shield on the Dynamics of the Charged Particles Beam”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 337-339. doi:10.18429/JACoW-RUPAC2018-WEPSB27
[n] E. G. Stern, J. F. Amundson, P. Spentzouris, J. Qiang, and R. D. Ryne, “Simulations of Space Charge in the Fermilab Main Injector”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP096, pp. 1654-1656.
[n] N. Mokhov and J. Strait, “Optimization of the LHC Interaction Region with Respect to Beam-induced Energy Deposition”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP028G, pp. 386-388.
[n] D. L. Johnson, K. B. Coachman, J. J. Ramirez, and R. W. Stinnett, “A Conceptual Design for an LMF Accelerator Module”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1017-1020.
[n] G. Dattoli, L. Mezi, M. Migliorati, and A. Renieri, “Storage Ring FELs Pulse Propagation Effects and Microwave Instability”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B03, pp. 767-769.
[n] A. Sadeghipanah, S. B. Hung, W. K. Lau, A. P. Lee, and N. Y. Huang, “A Study of Emittance Growth in a Photoinjector Linac by using PWT as Pre-accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC066, pp. 3044-3046.
[n] I. Rodriguez, F. J. Bermejo, J. L. Munoz, and D. de Cos, “Calculation, Design and Manufacturing of a Resistive Quadrupole for the ESS-Bilbao Transfer Lines”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO012, pp. 2418-2420.
[n] T. Kuerzeder, M. Arnold, L. E. Juergensen, J. Pforr, N. Pietralla, and F. Hug, “Beam Break-up Measurements at the Recirculating Electron Accelerator S-DALINAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1714-1716. doi:10.18429/JACoW-IPAC2016-TUPOR025
[n] K. J. Beczek, J. W. Lewellen, A. Nassiri, and E. Tanabe, “A Rationalized Approach to Thermionic RF Gun Design”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH052, pp. 2206-2208.
[n] N. Yu. Kazarinov et al., “Beam Lines for Gas Filled Separator Experiments at DC280 Cyclotron”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 272-275. doi:10.18429/JACoW-RUPAC2018-TUPSA60
[n] Z.-F. He, D. M. Li, Y. H. Liu, S. L. Wang, J.-L. Zhang, and Y.-T. Zhang, “CW-type HV Power Supply of 50 Hz and its Application in Accelerator Power Supply”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA018, pp. 699-701.
[n] F. H. Chao, C. H. Chen, Y.-C. Huang, and P. J. Chou, “THz Electron-pulse-train Dynamics in a MeV Photo-injector”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THOBB103, pp. 3109-3111.
[n] H. Ao et al., “Fabrication and Cold Test Result of FRIB =0.53 Pre-production Cryomodule”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 120-124. doi:10.18429/JACoW-SRF2017-MOPB031
[n] N. Y. Huang et al., “Study of a THz/VUV Free Electron Laser Facility in Taiwan”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2980-2982. doi:10.18429/JACoW-IPAC2014-THPRO050
[n] A. J. Gonsalves et al., “Multi-GeV Plasma Acceleration Results at BELLA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1319-1324. doi:10.18429/JACoW-IPAC2015-TUYC2
[n] R. Enparantza et al., “Beam Stop Design and Construction for the Front End Test Stand at ISIS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE049, pp. 1080-1082.
[n] E. Takada, T. Kondo, N. Shinozaki, N. Sasaki, T. Takei, and Y. Sano, “Status of HIMAC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10013, pp. XX-XX.
[n] I. Itahashi, M. Aoki, Y. Arimoto, Y. Kuno, A. Sato, and M. Y. Yoshida, “Extinction Monitor by Using a Dissociation of Hydrogen Molecule to Atoms with High Energy Proton Beam”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP072, pp. 3527-3529.
[n] W. Chou, A. Drozhdin, P. Lucas, and J.-F. Ostiguy, “Fermilab Booster Modeling and Space Charge Study”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG017, pp. 2925-2927.
[n] M. R. Buckner, M. Cappiello, E. Pitcher, and H. O, “Medical Isotope Production with the Accelerator Production of Tritium APT Facility”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4099, pp. 636-638.
[n] T. Carlisle, J. H. Cobb, and R. R. M. Fletcher, “Ionization Cooling in MICE Step IV”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ036, pp. 877-879.
[n] J. A. Satti and S. D. Holmes, “A Pulsed Septum Magnet for the Fermilab Antiproton Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3628-3631.
[n] J. L. Belmont and J. L. Pabot, “Study of Axial Injection for the Grenoble Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper C-009, pp. XX-XX.
[n] H. H?Âltermann et al., “Light Ion Injector for NICA”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 834-836. doi:10.18429/JACoW-NAPAC2019-WEPLH15
[n] T. Kaneyasu, Y. Iwasaki, S. Koda, and Y. Takabayashi, “Status and Development of the SAGA Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC042, pp. 2996-2998.
[n] W. Simeoni and F. B. Rizzato, “Kinetic Theory of Halo Formation in Charged Particle Beams”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPAC01, pp. 448-450.
[n] P. K. Saha et al., “Beam Commissioning Results of the RCS Injection and Extraction at J-PARC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP105, pp. 3611-3613.
[n] T. Kramer et al., “Considerations for the Beam Dump System of a 100 TeV Centre-of-mass FCC hh Collider”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2132-2135. doi:10.18429/JACoW-IPAC2015-TUPTY050
[n] P. Duval, M. Lomperski, and J. Bobnar, “Control System Evolution and the Importance of Trial and Error”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 6-9. doi:10.18429/JACoW-PCAPAC2016-WECSPLCO02
[n] E. B. Tilles, J. D. McCarthy, and R. F. Nissen, “Conductive Coating for Ceramic Beam Tubes”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1020-1022.
For LaTeX
Use Complete Form
For BibTeX
References
- F. F. Wu et al., “Preliminary Research of HLS II BLM System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 190-192.
- G. Gulbekyan, B. Gikal, I. Kalagin, and N. Kazarinov, “Status Report and Future Development FLNR JINR Heavy Ions Accelerator Complex”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper TU-08, pp. 59-63.
- I. Bustinduy et al., “Beam Dynamics Simulations for the ESS-Bilbao H- Ion Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC023, pp. 2052-2054.
- T. Honma et al., “Present Status of HIMAC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A02, pp. 2557-2559.
- J. Faure, J. L. Lemaire, and R. Vienet, “The 3 Preinjectors of MIMAS for Heavy Ions Polarized and Unpolariezed Ions”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1072-1075.
- I. Bustinduy et al., “Low Energy Beam Transport Developments for the Bilbao Accelerator”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP011, pp. 1522-1524.
- Y. Furukawa, M. Ishii, T. Nakatani, and T. Ohata, “Development of an Interpreter Program for an Equipment Control”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP033, pp. XX-XX.
- J.-Y. Hwang, J. H. Chen, W. K. Lau, A. P. Lee, T. H. Wu, and N. Y. Huang, “A Low Energy Thermionic RF Gun Linac for Ultrashort Electron Beam”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC038, pp. 1081-1083.
- L. L. Tang et al., “Application of the Gige Vision Digital Camera for Beam Diagnostics in HLS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE032, pp. 1041-1043.
- D. Harryman et al., “Investigation of readout methods for electro-optical beam position monitor pickups”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 788-792.
- A. Stallwood, D. J. Butler, and G. M. A. Duller, “The Use of AM Technologies for HV and UHV Components and Vessels”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 114-117.
- R. Kato, K. Furuhashi, G. Isoyama, S. Kashiwagi, M. Morio, and Y. Terasawa, “Longitudinal Phase-space and Transverse Slice Emittance Measurements of High-brightness Electron Beams”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC21, pp. 293-296.
- G. L. Dorofeev, E. E. Donets, and V. M. Drobin, “The Influence of the Unclosed Superconducting Magnetic Shield on the Dynamics of the Charged Particles Beam”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 337-339.
- E. G. Stern, J. F. Amundson, P. Spentzouris, J. Qiang, and R. D. Ryne, “Simulations of Space Charge in the Fermilab Main Injector”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP096, pp. 1654-1656.
- N. Mokhov and J. Strait, “Optimization of the LHC Interaction Region with Respect to Beam-induced Energy Deposition”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP028G, pp. 386-388.
- D. L. Johnson, K. B. Coachman, J. J. Ramirez, and R. W. Stinnett, “A Conceptual Design for an LMF Accelerator Module”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1017-1020.
- G. Dattoli, L. Mezi, M. Migliorati, and A. Renieri, “Storage Ring FELs Pulse Propagation Effects and Microwave Instability”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B03, pp. 767-769.
- A. Sadeghipanah, S. B. Hung, W. K. Lau, A. P. Lee, and N. Y. Huang, “A Study of Emittance Growth in a Photoinjector Linac by using PWT as Pre-accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC066, pp. 3044-3046.
- I. Rodriguez, F. J. Bermejo, J. L. Munoz, and D. de Cos, “Calculation, Design and Manufacturing of a Resistive Quadrupole for the ESS-Bilbao Transfer Lines”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPO012, pp. 2418-2420.
- T. Kuerzeder, M. Arnold, L. E. Juergensen, J. Pforr, N. Pietralla, and F. Hug, “Beam Break-up Measurements at the Recirculating Electron Accelerator S-DALINAC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1714-1716.
- K. J. Beczek, J. W. Lewellen, A. Nassiri, and E. Tanabe, “A Rationalized Approach to Thermionic RF Gun Design”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH052, pp. 2206-2208.
- N. Yu. Kazarinov et al., “Beam Lines for Gas Filled Separator Experiments at DC280 Cyclotron”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 272-275.
- Z.-F. He, D. M. Li, Y. H. Liu, S. L. Wang, J.-L. Zhang, and Y.-T. Zhang, “CW-type HV Power Supply of 50 Hz and its Application in Accelerator Power Supply”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA018, pp. 699-701.
- F. H. Chao, C. H. Chen, Y.-C. Huang, and P. J. Chou, “THz Electron-pulse-train Dynamics in a MeV Photo-injector”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THOBB103, pp. 3109-3111.
- H. Ao et al., “Fabrication and Cold Test Result of FRIB =0.53 Pre-production Cryomodule”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 120-124.
- N. Y. Huang et al., “Study of a THz/VUV Free Electron Laser Facility in Taiwan”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2980-2982.
- A. J. Gonsalves et al., “Multi-GeV Plasma Acceleration Results at BELLA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1319-1324.
- R. Enparantza et al., “Beam Stop Design and Construction for the Front End Test Stand at ISIS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE049, pp. 1080-1082.
- E. Takada, T. Kondo, N. Shinozaki, N. Sasaki, T. Takei, and Y. Sano, “Status of HIMAC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10013, pp. XX-XX.
- I. Itahashi, M. Aoki, Y. Arimoto, Y. Kuno, A. Sato, and M. Y. Yoshida, “Extinction Monitor by Using a Dissociation of Hydrogen Molecule to Atoms with High Energy Proton Beam”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP072, pp. 3527-3529.
- W. Chou, A. Drozhdin, P. Lucas, and J.-F. Ostiguy, “Fermilab Booster Modeling and Space Charge Study”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG017, pp. 2925-2927.
- M. R. Buckner, M. Cappiello, E. Pitcher, and H. O, “Medical Isotope Production with the Accelerator Production of Tritium APT Facility”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4099, pp. 636-638.
- T. Carlisle, J. H. Cobb, and R. R. M. Fletcher, “Ionization Cooling in MICE Step IV”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPZ036, pp. 877-879.
- J. A. Satti and S. D. Holmes, “A Pulsed Septum Magnet for the Fermilab Antiproton Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3628-3631.
- J. L. Belmont and J. L. Pabot, “Study of Axial Injection for the Grenoble Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper C-009, pp. XX-XX.
- H. H?Âltermann et al., “Light Ion Injector for NICA”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 834-836.
- T. Kaneyasu, Y. Iwasaki, S. Koda, and Y. Takabayashi, “Status and Development of the SAGA Light Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC042, pp. 2996-2998.
- W. Simeoni and F. B. Rizzato, “Kinetic Theory of Halo Formation in Charged Particle Beams”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPAC01, pp. 448-450.
- P. K. Saha et al., “Beam Commissioning Results of the RCS Injection and Extraction at J-PARC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP105, pp. 3611-3613.
- T. Kramer et al., “Considerations for the Beam Dump System of a 100 TeV Centre-of-mass FCC hh Collider”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2132-2135.
- P. Duval, M. Lomperski, and J. Bobnar, “Control System Evolution and the Importance of Trial and Error”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 6-9.
- E. B. Tilles, J. D. McCarthy, and R. F. Nissen, “Conductive Coating for Ceramic Beam Tubes”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1020-1022.
Back to search