Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. Ohuchi et al., “Solenoid Field Calculation of the SuperKEKB Interaction Region”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD023, pp. 3548-3550.
[n] C. Mai, B. B??sing, A. Held, S. Khan, and D. Krieg, “Towards Arbitrary Pulse Shapes in the Terahertz Domain”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3977-3979. doi:10.18429/JACoW-IPAC2021-THPAB097
[n] R. Baiod, D. J. Harding, D. E. Johnson, P. S. Martin, and S. Mishra, “The Main Injector Trim Dipole Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP04, pp. 1331-1333.
[n] H. Nakano et al., “Upgrade of low-level RF system for J-PARC linac RFQ-TS”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1764-1767. doi:10.18429/JACoW-IPAC2025-WEPB019
[n] N. Ohuchi et al., “Operation of Superconducting Final Focus Magnet System of SuperKEKB”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, paper WEOBB04, pp. XX-XX.
[n] M. S. Chun et al., “Development of High Power Electron Accelerator for Industrial Applications”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A09, pp. 2612-2614.
[n] A. Pandey et al., “Operational Experience with the Mechanical Tuner Systems in the Superconducting Linac at IUAC”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 809. doi:10.18429/JACoW-SRF2021-THPCAV011
[n] G. P. Jackson et al., “Luminosity Lifetime in the Tevatron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 556-559.
[n] R. Bartolini and T. Pulampong, “Ultra-low Emittance Upgrade Options for Third Generation Light Sources”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA067, pp. 237-239.
[n] M. K. Sullivan et al., “IR Upgrade Plans for the PEP-II B-Factory”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT141, pp. 869-871.
[n] J. Dey and J. M. Steimel, “Improving the Linearity of Ferrite Loaded Cavities Using Feedback”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH046, pp. 873-875.
[n] C. R. Kerns, “Radiation Hardened Proton Meter for Fermilab External Beam Lines”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1104-1109.
[n] P. Thingstad, “Inert Gas Purifier for SLAC's Two-Meter Steamer Chamber”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 659-661.
[n] T. Elioff, “Proton-Electron-Positron Design Study”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 1039-1045.
[n] T. Roggen, H. De Gersem, B. Masschaele, W. Ackermann, S. Franke, and T. Weiland, “Embedding Finite Element Results for Accelerator Components in a Moment Approach Beam Dynamics Code”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC088, pp. 2217-2219.
[n] D. E. Johnson, C. S. Mishra, S. D. Holmes, N. Gelfand, J. A. Holt, and L. Michelotti, “Design and Simulation of the Antiproton Recycler Lattice”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W016, pp. 997-999.
[n] B. Singh, M. Apollonio, E. C. Longhi, R. Bartolini, and T. Pulampong, “Investigation and Test of the Possibility of Reducing the Emittance of the Diamond Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA066, pp. 234-236.
[n] H. Dewa et al., “Photoelectron RF Gun Designed as a Single Cell Cavity”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF046, pp. 411-413.
[n] J. N. Corlett et al., “The Next Linear Collider Damping Ring Complex”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA20, pp. 3429-3431.
[n] S. Bettoni, B. Beutner, and V. A. Goryashko, “Microbunching Instability Studies in SwissFEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP064, pp. 1744-1746.
[n] S. Holm and P.-U. Renberg, “Initial Operation of the Reconstructed Uppsala Synchrocyclotron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 353-356.
[n] C. Liu, W. Ackermann, W. F. O. Müller, and T. Weiland, “Various Approaches to Electromagnetic Field Simulations for RF Cavities”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC093, pp. 2226-2228.
[n] H.-D. Nuhn, R. Boyce, R. Gould, H. Winick, R. Yotam, and B. Youngman, “A 5 GeV Injector for PEP”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1217-1220.
[n] Z. Mart?¡, G. Benedetti, M. Carl?á, U. Iriso, and L. Torino, “Full Coupling Studies at ALBA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1667-1670. doi:10.18429/JACoW-IPAC2022-WEOZSP4
[n] T. Pulampong and R. Bartolini, “A Non-linear Injection Kicker for Diamond Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA065, pp. 2268-2270.
[n] B. Bayanov et al., “Liquid Lithium Lens with High Magnetic Fields”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP58, pp. 3086-3088.
[n] S. Ghosh et al., “Developmental and Operational Aspects of Nb QWR Based Heavy Ion LINAC System at IUAC Delhi”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP092, pp. 640-642.
[n] R. M. Bionta, “Characterization of X-Ray FEL Radiation”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOB003, pp. XX-XX.
[n] C. Taylor and R. B. Meuser, “Conceptual Magnet Design for an Iron-Free Colliding Beam Acelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2042-2045.
[n] T. Roggen, H. De Gersem, B. Masschaele, W. Ackermann, S. Franke, and T. Weiland, “Radio Frequency Quadrupole Surrogate Field Models Based on 3D Electromagnetic Field Simulation Results”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 379-381. doi:10.18429/JACoW-IPAC2014-MOPME003
[n] K. Jimbo, K. Leung, T. Shirai, and K. A. Van Bibber, “Proposal for a Compact Neutron Generator Based on a Negative Deuterium Ion Beam”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1599-1601. doi:10.18429/JACoW-IPAC2022-WEOXSP1
[n] G. F. Popov, A. I. Kalinichenko, V. T. Lazurik, and V. V. Tovstiak, “Radiation-Acoustic Monitoring of Therapeutic Beam”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG031, pp. 1080-1082.
[n] S. M. Liuzzo et al., “Influence of errors on the ESRF Upgrade Lattice”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1426-1429. doi:10.18429/JACoW-IPAC2015-TUPWA014
[n] O. H. Rahman, J. P. Biswas, M. Gaowei, W. Liu, and E. Wang, “New Activation Techniques for Higher Charge Lifetime from GaAs Photocathodes”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2157-2159. doi:10.18429/JACoW-IPAC2019-TUPTS102
[n] H. Nishimura, L. Schachinger, and H. Ohgaki, “Orbit Control at the ALS Based on Sensitivity Matrices”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR04, pp. 2247-2249.
[n] B. Bayanov, V. Belov, S. Taskaev, and E. Zhoorov, “Neutron producing target for accelerator based neutron capture therapy”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MOLP11, pp. XX-XX.
[n] R. Kitamura et al., “Recent Activities at the J-PARC RFQ-TS”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP4622, unpublished.
[n] J. K??hn et al., “Thermal Load Studies on the Photocathode Insert with Exchangeable Plug for the BERLinPro SRF-Photoinjector”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 705-708. doi:10.18429/JACoW-SRF2019-TUP100
[n] W. J. Corbett, C. Limborg-Deprey, W. Y. Mok, and A. Ringwall, “The SPEAR 3 Diagnostic Beamlines”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT080, pp. 4057-4059.
[n] T. Tajima et al., “Development of HOM Absorber for KEK B-Factory SC Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I39, pp. XX-XX.
[n] L. B. Hu et al., “Simulation of Cryogenic Process and Control of EAST Based on EPICS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1024-1027. doi:10.18429/JACoW-ICALEPCS2017-WEAPL03
[n] D. S. Day, A. Hahn, C. Prados, and M. Reese, “Improving Throughput and Latency of D-Bus to Meet the Requirements of the Fair Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 809-812. doi:10.18429/JACoW-ICALEPCS2017-TUPHA168
[n] V. S. Podobaev et al., “Status of ILU-14 Electron Accelerator”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper FRCHB03, pp. 411-413.
[n] T. Ohnishi, S. Ichikawa, and M. Wakasugi, “Electron-Beam-Driven RI Separator for SCRIT at RIKEN RI Beam Factory”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB02, pp. 194-196.
[n] B. Singh, M. Apollonio, R. Bartolini, I. P. S. Martin, A. Alekou, and T. Pulampong, “Injection Using a Non-linear Kicker Located in the Existing Injection Straight at Diamond Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 840-843. doi:10.18429/JACoW-IPAC2016-MOPOW055
[n] L. Zhou, M. Zhang, Z. Luo, Q. Yu, D. Kong, and J. Qiao, “Preliminary Design of a Dedicated Proton Therapy Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D046, pp. 785-786.
[n] M. Eriksson et al., “The MAX IV Synchrotron Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC058, pp. 3026-3028.
[n] Y. Feng, J. B. Hastings, J. Wu, P. Emma, R. W. Schoenlein, and T. Warwick, “High-resolution Seeding Monochromator Design for NGLS”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO17, pp. 529-532.
[n] S. Mitsunobu et al., “MgB2 Thin Films on Copper, Titanium and Niobium by Pulse Laser Deposition in KEK”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO077, pp. 413-417.
[n] J. M. Paterson, “The External Electron Beam Facility at the Cambridge Electron Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 931-935.
[n] B. Spaniol, U. Weitzel-Hoefler, and W. C. Heraeus GmbH Co, “Mass Production of High Purity Niobium”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUA006A, pp. 96-99.
[n] D. Dobrott et al., “Control System User Interface for Accelerator Commissioning and Operation”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1305-1308.
[n] P. Cara et al., “The Linear IFMIF Prototype Accelerator (LIPAC) Design Development under the European-Japanese Collaboration”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 985-988. doi:10.18429/JACoW-IPAC2016-MOPOY057
[n] Y. Iwashita, E. Antokhin, M. Aoki, M. Kumada, and T. Mihara, “Permanent Magnet Quadrupole for Final Focus for Linear Collider”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB069, pp. 2198-2200.
For LaTeX
Use Complete Form
For BibTeX
References
- N. Ohuchi et al., “Solenoid Field Calculation of the SuperKEKB Interaction Region”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD023, pp. 3548-3550.
- C. Mai, B. B??sing, A. Held, S. Khan, and D. Krieg, “Towards Arbitrary Pulse Shapes in the Terahertz Domain”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3977-3979.
- R. Baiod, D. J. Harding, D. E. Johnson, P. S. Martin, and S. Mishra, “The Main Injector Trim Dipole Magnets”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAP04, pp. 1331-1333.
- H. Nakano et al., “Upgrade of low-level RF system for J-PARC linac RFQ-TS”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB019, pp. 1764-1767.
- N. Ohuchi et al., “Operation of Superconducting Final Focus Magnet System of SuperKEKB”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, paper WEOBB04, pp. XX-XX.
- M. S. Chun et al., “Development of High Power Electron Accelerator for Industrial Applications”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7A09, pp. 2612-2614.
- A. Pandey et al., “Operational Experience with the Mechanical Tuner Systems in the Superconducting Linac at IUAC”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 809.
- G. P. Jackson et al., “Luminosity Lifetime in the Tevatron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 556-559.
- R. Bartolini and T. Pulampong, “Ultra-low Emittance Upgrade Options for Third Generation Light Sources”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA067, pp. 237-239.
- M. K. Sullivan et al., “IR Upgrade Plans for the PEP-II B-Factory”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT141, pp. 869-871.
- J. Dey and J. M. Steimel, “Improving the Linearity of Ferrite Loaded Cavities Using Feedback”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH046, pp. 873-875.
- C. R. Kerns, “Radiation Hardened Proton Meter for Fermilab External Beam Lines”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1104-1109.
- P. Thingstad, “Inert Gas Purifier for SLAC's Two-Meter Steamer Chamber”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 659-661.
- T. Elioff, “Proton-Electron-Positron Design Study”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 1039-1045.
- T. Roggen, H. De Gersem, B. Masschaele, W. Ackermann, S. Franke, and T. Weiland, “Embedding Finite Element Results for Accelerator Components in a Moment Approach Beam Dynamics Code”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC088, pp. 2217-2219.
- D. E. Johnson, C. S. Mishra, S. D. Holmes, N. Gelfand, J. A. Holt, and L. Michelotti, “Design and Simulation of the Antiproton Recycler Lattice”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W016, pp. 997-999.
- B. Singh, M. Apollonio, E. C. Longhi, R. Bartolini, and T. Pulampong, “Investigation and Test of the Possibility of Reducing the Emittance of the Diamond Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA066, pp. 234-236.
- H. Dewa et al., “Photoelectron RF Gun Designed as a Single Cell Cavity”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF046, pp. 411-413.
- J. N. Corlett et al., “The Next Linear Collider Damping Ring Complex”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA20, pp. 3429-3431.
- S. Bettoni, B. Beutner, and V. A. Goryashko, “Microbunching Instability Studies in SwissFEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP064, pp. 1744-1746.
- S. Holm and P.-U. Renberg, “Initial Operation of the Reconstructed Uppsala Synchrocyclotron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 353-356.
- C. Liu, W. Ackermann, W. F. O. Müller, and T. Weiland, “Various Approaches to Electromagnetic Field Simulations for RF Cavities”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC093, pp. 2226-2228.
- H.-D. Nuhn, R. Boyce, R. Gould, H. Winick, R. Yotam, and B. Youngman, “A 5 GeV Injector for PEP”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1217-1220.
- Z. Mart?¡, G. Benedetti, M. Carl?á, U. Iriso, and L. Torino, “Full Coupling Studies at ALBA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1667-1670.
- T. Pulampong and R. Bartolini, “A Non-linear Injection Kicker for Diamond Light Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA065, pp. 2268-2270.
- B. Bayanov et al., “Liquid Lithium Lens with High Magnetic Fields”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP58, pp. 3086-3088.
- S. Ghosh et al., “Developmental and Operational Aspects of Nb QWR Based Heavy Ion LINAC System at IUAC Delhi”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP092, pp. 640-642.
- R. M. Bionta, “Characterization of X-Ray FEL Radiation”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THOB003, pp. XX-XX.
- C. Taylor and R. B. Meuser, “Conceptual Magnet Design for an Iron-Free Colliding Beam Acelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2042-2045.
- T. Roggen, H. De Gersem, B. Masschaele, W. Ackermann, S. Franke, and T. Weiland, “Radio Frequency Quadrupole Surrogate Field Models Based on 3D Electromagnetic Field Simulation Results”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 379-381.
- K. Jimbo, K. Leung, T. Shirai, and K. A. Van Bibber, “Proposal for a Compact Neutron Generator Based on a Negative Deuterium Ion Beam”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1599-1601.
- G. F. Popov, A. I. Kalinichenko, V. T. Lazurik, and V. V. Tovstiak, “Radiation-Acoustic Monitoring of Therapeutic Beam”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG031, pp. 1080-1082.
- S. M. Liuzzo et al., “Influence of errors on the ESRF Upgrade Lattice”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1426-1429.
- O. H. Rahman, J. P. Biswas, M. Gaowei, W. Liu, and E. Wang, “New Activation Techniques for Higher Charge Lifetime from GaAs Photocathodes”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2157-2159.
- H. Nishimura, L. Schachinger, and H. Ohgaki, “Orbit Control at the ALS Based on Sensitivity Matrices”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR04, pp. 2247-2249.
- B. Bayanov, V. Belov, S. Taskaev, and E. Zhoorov, “Neutron producing target for accelerator based neutron capture therapy”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper MOLP11, pp. XX-XX.
- R. Kitamura et al., “Recent Activities at the J-PARC RFQ-TS”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP4622, this conference.
- J. K??hn et al., “Thermal Load Studies on the Photocathode Insert with Exchangeable Plug for the BERLinPro SRF-Photoinjector”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 705-708.
- W. J. Corbett, C. Limborg-Deprey, W. Y. Mok, and A. Ringwall, “The SPEAR 3 Diagnostic Beamlines”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT080, pp. 4057-4059.
- T. Tajima et al., “Development of HOM Absorber for KEK B-Factory SC Cavities”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I39, pp. XX-XX.
- L. B. Hu et al., “Simulation of Cryogenic Process and Control of EAST Based on EPICS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1024-1027.
- D. S. Day, A. Hahn, C. Prados, and M. Reese, “Improving Throughput and Latency of D-Bus to Meet the Requirements of the Fair Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 809-812.
- V. S. Podobaev et al., “Status of ILU-14 Electron Accelerator”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper FRCHB03, pp. 411-413.
- T. Ohnishi, S. Ichikawa, and M. Wakasugi, “Electron-Beam-Driven RI Separator for SCRIT at RIKEN RI Beam Factory”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB02, pp. 194-196.
- B. Singh, M. Apollonio, R. Bartolini, I. P. S. Martin, A. Alekou, and T. Pulampong, “Injection Using a Non-linear Kicker Located in the Existing Injection Straight at Diamond Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 840-843.
- L. Zhou, M. Zhang, Z. Luo, Q. Yu, D. Kong, and J. Qiao, “Preliminary Design of a Dedicated Proton Therapy Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D046, pp. 785-786.
- M. Eriksson et al., “The MAX IV Synchrotron Light Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC058, pp. 3026-3028.
- Y. Feng, J. B. Hastings, J. Wu, P. Emma, R. W. Schoenlein, and T. Warwick, “High-resolution Seeding Monochromator Design for NGLS”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO17, pp. 529-532.
- S. Mitsunobu et al., “MgB2 Thin Films on Copper, Titanium and Niobium by Pulse Laser Deposition in KEK”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO077, pp. 413-417.
- J. M. Paterson, “The External Electron Beam Facility at the Cambridge Electron Accelerator”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 931-935.
- B. Spaniol, U. Weitzel-Hoefler, and W. C. Heraeus GmbH Co, “Mass Production of High Purity Niobium”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUA006A, pp. 96-99.
- D. Dobrott et al., “Control System User Interface for Accelerator Commissioning and Operation”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1305-1308.
- P. Cara et al., “The Linear IFMIF Prototype Accelerator (LIPAC) Design Development under the European-Japanese Collaboration”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 985-988.
- Y. Iwashita, E. Antokhin, M. Aoki, M. Kumada, and T. Mihara, “Permanent Magnet Quadrupole for Final Focus for Linear Collider”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB069, pp. 2198-2200.
Back to search