Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Arevalo, B. Doliwa, and T. Weiland, “Transverse Coupling Impedance of a Ferrite Kicker Magnet: Comparison between Simulations and Measurements”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUPPP24, pp. 128-131.
[n] D. N. Kundu, “Status Report on the Variable Energy Cyclotron at Calcutta”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 107-110.
[n] C. Y. Liao, Y.-S. Cheng, K. T. Hsu, C. H. Kuo, and C. Y. Wu, “User Interfaces Development of Imaging Diagnostic Devices for the Taiwan Photon Source”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC123, pp. 871-874.
[n] A. Kondrashev et al., “Experimental Results on Multi-Charge-State LEBT Approach”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS003, pp. 1658-1660.
[n] T. Sugimura, T. Shirai, H. Tonguu, Y. Iwashita, A. Noda, and M. Inoue, “Present Status of the Electron Linac as the Injector for KSR”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W030, pp. 1206-1208.
[n] R. Zennaro, J. Alex, A. Citterio, and J.-Y. Raguin, “Measurements and High Power Test of the First C-band Accelerating Structure for SwissFEL”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP119, pp. 333-335.
[n] G. J. Waldschmidt et al., “High-power Waveguide Dampers for the Short-Pulse X-Ray Project at the Advanced Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC029, pp. 3344-3346.
[n] M. Satoh, “The KEK Injector Upgrade for the Fast Beam-Mode Switch”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS124, pp. 855-857.
[n] S. A. Watson, G. R. Jennings, and D. C. Moir, “RF Phase Measurement at Phermex Using Time-To-Digital Converters”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1591-1593.
[n] Y.-M. Shin, K. Carlson, M. D. Church, V. D. Shiltsev, D. A. Still, and J. C. Tobin, “Crystal Channeling Acceleration Research for High Energy Linear Collider at ASTA Facility”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO70, pp. 122-126.
[n] E. Wang, I. Ben-Zvi, and J. Kewisch, “Parmela Simulation for BNL 704MHz SRF Gun in Low Emittance Operation”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM07, pp. 643-645.
[n] M. Konrad et al., “Development of a Digital Low-level RF Control System for the p-Linac Test Stand at FAIR”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC075, pp. 3461-3463.
[n] P. Manini, A. Conte, B. Mountford, and S. Raimondi, “First Experience on NEG Coated Chambers at the Australian Synchrotron Light Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP140, pp. 3690-3692.
[n] F. Jenni and L. Tanner, “Digital Control for Highest Precision Accelerator Power Supplies”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH010, pp. 3681-3683.
[n] P. Nonn et al., “Pulsed Low Level Baseband RF Control of CH-Cavities for p-Linac at FAIR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2421-2423. doi:10.18429/JACoW-IPAC2014-WEPME063
[n] M. T. Heron et al., “Performance and Future Developments of the Diamond Fast Orbit Feedback System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC118, pp. 3257-3259.
[n] J. S. Kolski, “Proposed Varying Amplitude Raster Pattern to Uniformly Cover Target for the Isotope Production Facility (IPF) at LANSCE”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB46, pp. 148-150.
[n] Y.-S. Cheng, K. T. Hsu, K. H. Hu, D. Lee, and C. Y. Liao, “Application of Soc Based Applications in the TPS Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1569-1572. doi:10.18429/JACoW-ICALEPCS2017-THPHA079
[n] Y. Zhang et al., “Experience with the SNS SC Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP044, pp. 3461-3463.
[n] A. Halavanau, A. I. Benediktovitch, and E. A. Gurnevich, “Cherenkov Radiation in Periodic Wire Medium Formed by Transversely Modulated Electron Beams”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1878-1880. doi:10.18429/JACoW-IPAC2019-TUPRB092
[n] J. L. Hirshfield, G. G. Denisov, S. Kuzikov, and M. Yu. Shmelyov, “Quasi-Optical Components for Future Linear Colliders”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP53, pp. 730-732.
[n] N. Vinogradov, V. N. Aseev, M. R. L. Kern, P. N. Ostroumov, R. C. Pardo, and R. H. Scott, “Progress with the 2Q-LEBT Facility for the RIA Project”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPB003, pp. 253-255.
[n] J. Conrad et al., “Upgrade of a UHV Furnace for 1700 C Heat Treatment and Processing of Niobium Samples”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3709-3711. doi:10.18429/JACoW-IPAC2016-THPMY024
[n] A. A. Nosych and U. Iriso, “Studies and Historical Analysis of ALBA Beam Loss Monitors”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 94-97. doi:10.18429/JACoW-IBIC2016-MOPG22
[n] E. Khabibullina, L. Bellan, M. Comunian, A. Pisent, and A. D. Russo, “Beam Dynamic of Transport Line 1+ with New HRMS for the SPES Project”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 114-116. doi:10.18429/JACoW-LINAC2016-MOPRC019
[n] T. Kusaka, M. Hara, A. Miura, and T. Yoshiyuki, “RF System for the STA SR Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 180-183.
[n] X. H. Ke and F. Jenni, “In-situ System Identification for an Optimal Control of Magnet Power Supplies”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP182, pp. 1172-1174.
[n] M. J. Borden, C. A. Chapman, C. T. Kelsey, J. F. O, and J. Sturrock, “LANSCE Fail Safe Radiation Shutter Design for Isotope Production Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS047, pp. 539-541.
[n] A. V. Samoshin and S. M. Polozov, “3D Beam Dynamic Simulation in Heavy Ion Superconducting Drift Tube Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS038, pp. 685-687.
[n] F. Hug et al., “Increasing the Stability of the Electron Beam of the S-DALINAC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI007, pp. 3303-3305.
[n] H. Guo, B. S. C. Oswald, and P. Arbenz, “Realistic 3-Dimensional Eigenmodal Analysis of Electromagnetic Cavities using Surface Impedance Boundary Conditions”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper WEP12, pp. 161-163.
[n] C. L. Chen et al., “Development of an IGBT Pulser for TPS LTB Kicker”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3191-3193. doi:10.18429/JACoW-IPAC2015-WEPHA035
[n] C. Meng et al., “Beam Commissioning of C-ADS Injector-I RFQ Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3827-3829. doi:10.18429/JACoW-IPAC2015-THPF057
[n] M. Espig et al., “Development of Pulsed Laser Systems and Cathode-performance Studies for the S-DALINAC Polarized Injector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD054, pp. 2642-2644.
[n] I. P. S. Martin, M. G. Abbott, M. Apollonio, D. Hickin, and R. Bartolini, “Operating the Diamond Storage Ring with Reduced Vertical Emittance”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA071, pp. 249-251.
[n] C. He?ƒler et al., “Commissioning of the Offline-teststand for the S-DALINAC Polarized Injector SPIN”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD027, pp. 1482-1484.
[n] R. S. Nelson, “Application of Cyclotrons in Materials Science (Invited paper)”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 664-677.
[n] C. Liang, “High - Tc Materials for Microwave Applications: Update, Progress, and Trends”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93D04, pp. XX-XX.
[n] S. Mori, D. Satoh, and M. Yoshida, “The RF Gun Adopting the Dielectric Assist Accelerating Structure”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 54-58. doi:10.18429/JACoW-LINAC2018-MOPO008
[n] J. M. Ortega, “Single-pass FELs”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 115-119.
[n] P. vom Stein, J. H. Hottenbacher, and A. Metz, “Developments towards a Full Energy Recovery Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPO026, pp. 1494-1496.
[n] H. von Jagwitz-Biegnitz et al., “Commissioning of the Ion Source for Siemens Novel Electrostatic Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA065, pp. 231-233.
[n] H. Wang, H. Qu, J. L. Wang, Z. Wang, and N. Zhou, “Preliminary Design of Magnet Support System for CEPC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4557-4559. doi:10.18429/JACoW-IPAC2017-THPVA052
[n] P. Musumeci, J. Moody, J. B. Rosenzweig, and C. M. Scoby, “Experimental Generation and Characterization of Uniformly Filled Ellipsoidal Electron Beam Distributions”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP075, pp. 724-726.
[n] M. M. El-Ashmawy, G. D'Auria, M. M. Dehler, J.-Y. Raguin, G. Riddone, and R. Zennaro, “Single Bunch Wakefields in the CERN-PSI-ELETTRA X-band Linear Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD032, pp. 1997-1999.
[n] A. Enomoto, “Quick Recovery of the KEK e-/e+ Injector Linac from the Great East Japan Earthquake”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD064, pp. 2669-2671.
[n] C. H. Gough, S. Ivkovic, and M. Paraliev, “Recent Results from a Combined Diode-RF Gun”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC127, pp. 3182-3184.
[n] X. Zhou, Y. Ogawa, M. Yoshida, and R. Zhang, “The Developing of the Beam Injection Section with Laser Source and S-Band Electron RF Gun for SuperKEKB Project”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 50-53. doi:10.18429/JACoW-LINAC2018-MOPO007
[n] P. M. Ivanov et al., “Head-Tail Instability at Tevatron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB021, pp. 3062-3064.
[n] S. Vetter, “Optimization of Lasers in Electron Accelerator Applications”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper WEAO03, unpublished.
[n] R. M. Stringfield et al., “High Power RF Amplifiers for Accelerator Applications: The Large Orbit Gyrotron and the High Current, Space Charge Enhanced Relativistic Klystron”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO454, pp. 198-200.
[n] C. Y. Tan and J. Steimel, “The Tevatron Bunch by Bunch Longitudinal Dampers”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB024, pp. 3071-3073.
[n] P. Bosland et al., “Power Tests of the SOLEIL Cryomodule”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP5B06, pp. 2046-2048.
[n] R. Stegmann et al., “Installation and Test of a Beam Loss Monitor System for the S-DALINAC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR014, pp. 804-806.
[n] J. Ruan et al., “Design of an Electro-Optical Sampling Experiment at the AWA Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS011, pp. 3901-3903.
[n] V. P. Previtali, R. W. Assmann, S. Redaelli, and I. A. Yazynin, “Beam Loss Predictions for the UA9 Crystal Collimation Experiment”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP021, pp. 2829-2831.
[n] M. Pont, “Operation Status of ALBA Synchrotron Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP023, pp. 1659-1661.
[n] A. Nadji et al., “Commissioning of the SOLEIL Synchroton Radiation Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN009, pp. 932-934.
[n] V. D. Shiltsev et al., “Channeling and Volume Reflection Based Crystal Collimation of the Tevatron Circulating Beam Halo (T980)”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUOAMH03, pp. 1243-1245.
[n] C. W. O. Ostenfeld, F. B?©dker, M. B?©ttcher, H. Bach, E. B. Christensen, and M. Pedersen, “Apple-II and TESLA FEL Undulators at Danfysik A/S”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN006, pp. 923-925.
[n] M. Pont, U. Iriso, R. Muñoz Horta, and F. Perez, “Operation of the ALBA Injector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC057, pp. 3023-3025.
[n] B. Singh et al., “Studies to Install a Multipole Wiggler by Removing a Chromatic Sextupole in the Diamond Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3518-3521. doi:10.18429/JACoW-IPAC2016-THPMR050
[n] R. A. Hardin, V. V. Danilov, and C. Deibele, “Experimental Tests of a Prototype System for Active Damping of the e-p Instability in the ORNL SNS Accumulator Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB053, pp. 2809-2811.
[n] P. Musumeci and J. Moody, “Ultrafast Beam Research at the Pegasus Laboratory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN021, pp. 2751-2753.
[n] C. Y. Tan and J. Steimel, “The Tevatron Transverse Dampers”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB025, pp. 3074-3076.
[n] V. Korchuganov et al., “The Status-2004 of the KURCHATOV Center of SR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF051, pp. 2386-2388.
[n] N. Tsoupas, T. Roser, M. Syphers, A. Luccio, and D. Underwood, “Transfer of a Polarized Proton Beam From AGS to RHIC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P001, pp. 207-209.
[n] M. M. El-Ashmawy and G. D'Auria, “The Short Range Wakefields of the Traveling Wave and Standing Wave X-band Linearizer of FERMI@ELETTRA FEL: A Comparative Study”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD034, pp. 2003-2005.
[n] C. D. Johnson and L. Thorndahl, “The CPS Gas-Ionization Beam Scanner”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 909-914.
[n] C. Christou, M. T. Heron, J. Rowland, and S. Gayadeen, “Studies to Optimize the Diamond Light Source Booster Synchrotron as a 100 MeV Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC069, pp. 3053-3055.
[n] B. Singh, M. Apollonio, E. C. Longhi, R. Bartolini, and T. Pulampong, “Investigation and Test of the Possibility of Reducing the Emittance of the Diamond Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA066, pp. 234-236.
[n] L. Torino, N. Carmignani, and A. Franchi, “Momentum Compaction Measurement Using Synchrotron Radiation”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 66-70. doi:10.18429/JACoW-IBIC2018-MOPA17
For LaTeX
Use Complete Form
For BibTeX
References
- E. Arevalo, B. Doliwa, and T. Weiland, “Transverse Coupling Impedance of a Ferrite Kicker Magnet: Comparison between Simulations and Measurements”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper TUPPP24, pp. 128-131.
- D. N. Kundu, “Status Report on the Variable Energy Cyclotron at Calcutta”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 107-110.
- C. Y. Liao, Y.-S. Cheng, K. T. Hsu, C. H. Kuo, and C. Y. Wu, “User Interfaces Development of Imaging Diagnostic Devices for the Taiwan Photon Source”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC123, pp. 871-874.
- A. Kondrashev et al., “Experimental Results on Multi-Charge-State LEBT Approach”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS003, pp. 1658-1660.
- T. Sugimura, T. Shirai, H. Tonguu, Y. Iwashita, A. Noda, and M. Inoue, “Present Status of the Electron Linac as the Injector for KSR”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W030, pp. 1206-1208.
- R. Zennaro, J. Alex, A. Citterio, and J.-Y. Raguin, “Measurements and High Power Test of the First C-band Accelerating Structure for SwissFEL”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP119, pp. 333-335.
- G. J. Waldschmidt et al., “High-power Waveguide Dampers for the Short-Pulse X-Ray Project at the Advanced Photon Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC029, pp. 3344-3346.
- M. Satoh, “The KEK Injector Upgrade for the Fast Beam-Mode Switch”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS124, pp. 855-857.
- S. A. Watson, G. R. Jennings, and D. C. Moir, “RF Phase Measurement at Phermex Using Time-To-Digital Converters”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1591-1593.
- Y.-M. Shin, K. Carlson, M. D. Church, V. D. Shiltsev, D. A. Still, and J. C. Tobin, “Crystal Channeling Acceleration Research for High Energy Linear Collider at ASTA Facility”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOPSO70, pp. 122-126.
- E. Wang, I. Ben-Zvi, and J. Kewisch, “Parmela Simulation for BNL 704MHz SRF Gun in Low Emittance Operation”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM07, pp. 643-645.
- M. Konrad et al., “Development of a Digital Low-level RF Control System for the p-Linac Test Stand at FAIR”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC075, pp. 3461-3463.
- P. Manini, A. Conte, B. Mountford, and S. Raimondi, “First Experience on NEG Coated Chambers at the Australian Synchrotron Light Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP140, pp. 3690-3692.
- F. Jenni and L. Tanner, “Digital Control for Highest Precision Accelerator Power Supplies”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH010, pp. 3681-3683.
- P. Nonn et al., “Pulsed Low Level Baseband RF Control of CH-Cavities for p-Linac at FAIR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2421-2423.
- M. T. Heron et al., “Performance and Future Developments of the Diamond Fast Orbit Feedback System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC118, pp. 3257-3259.
- J. S. Kolski, “Proposed Varying Amplitude Raster Pattern to Uniformly Cover Target for the Isotope Production Facility (IPF) at LANSCE”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOPAB46, pp. 148-150.
- Y.-S. Cheng, K. T. Hsu, K. H. Hu, D. Lee, and C. Y. Liao, “Application of Soc Based Applications in the TPS Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1569-1572.
- Y. Zhang et al., “Experience with the SNS SC Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP044, pp. 3461-3463.
- A. Halavanau, A. I. Benediktovitch, and E. A. Gurnevich, “Cherenkov Radiation in Periodic Wire Medium Formed by Transversely Modulated Electron Beams”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1878-1880.
- J. L. Hirshfield, G. G. Denisov, S. Kuzikov, and M. Yu. Shmelyov, “Quasi-Optical Components for Future Linear Colliders”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP53, pp. 730-732.
- N. Vinogradov, V. N. Aseev, M. R. L. Kern, P. N. Ostroumov, R. C. Pardo, and R. H. Scott, “Progress with the 2Q-LEBT Facility for the RIA Project”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPB003, pp. 253-255.
- J. Conrad et al., “Upgrade of a UHV Furnace for 1700 C Heat Treatment and Processing of Niobium Samples”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3709-3711.
- A. A. Nosych and U. Iriso, “Studies and Historical Analysis of ALBA Beam Loss Monitors”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 94-97.
- E. Khabibullina, L. Bellan, M. Comunian, A. Pisent, and A. D. Russo, “Beam Dynamic of Transport Line 1+ with New HRMS for the SPES Project”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 114-116.
- T. Kusaka, M. Hara, A. Miura, and T. Yoshiyuki, “RF System for the STA SR Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 180-183.
- X. H. Ke and F. Jenni, “In-situ System Identification for an Optimal Control of Magnet Power Supplies”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP182, pp. 1172-1174.
- M. J. Borden, C. A. Chapman, C. T. Kelsey, J. F. O, and J. Sturrock, “LANSCE Fail Safe Radiation Shutter Design for Isotope Production Facility”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS047, pp. 539-541.
- A. V. Samoshin and S. M. Polozov, “3D Beam Dynamic Simulation in Heavy Ion Superconducting Drift Tube Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS038, pp. 685-687.
- F. Hug et al., “Increasing the Stability of the Electron Beam of the S-DALINAC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI007, pp. 3303-3305.
- H. Guo, B. S. C. Oswald, and P. Arbenz, “Realistic 3-Dimensional Eigenmodal Analysis of Electromagnetic Cavities using Surface Impedance Boundary Conditions”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper WEP12, pp. 161-163.
- C. L. Chen et al., “Development of an IGBT Pulser for TPS LTB Kicker”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3191-3193.
- C. Meng et al., “Beam Commissioning of C-ADS Injector-I RFQ Accelerator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3827-3829.
- M. Espig et al., “Development of Pulsed Laser Systems and Cathode-performance Studies for the S-DALINAC Polarized Injector”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD054, pp. 2642-2644.
- I. P. S. Martin, M. G. Abbott, M. Apollonio, D. Hickin, and R. Bartolini, “Operating the Diamond Storage Ring with Reduced Vertical Emittance”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA071, pp. 249-251.
- C. He?ƒler et al., “Commissioning of the Offline-teststand for the S-DALINAC Polarized Injector SPIN”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD027, pp. 1482-1484.
- R. S. Nelson, “Application of Cyclotrons in Materials Science (Invited paper)”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 664-677.
- C. Liang, “High - Tc Materials for Microwave Applications: Update, Progress, and Trends”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93D04, pp. XX-XX.
- S. Mori, D. Satoh, and M. Yoshida, “The RF Gun Adopting the Dielectric Assist Accelerating Structure”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 54-58.
- J. M. Ortega, “Single-pass FELs”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 115-119.
- P. vom Stein, J. H. Hottenbacher, and A. Metz, “Developments towards a Full Energy Recovery Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPO026, pp. 1494-1496.
- H. von Jagwitz-Biegnitz et al., “Commissioning of the Ion Source for Siemens Novel Electrostatic Accelerator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA065, pp. 231-233.
- H. Wang, H. Qu, J. L. Wang, Z. Wang, and N. Zhou, “Preliminary Design of Magnet Support System for CEPC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4557-4559.
- P. Musumeci, J. Moody, J. B. Rosenzweig, and C. M. Scoby, “Experimental Generation and Characterization of Uniformly Filled Ellipsoidal Electron Beam Distributions”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP075, pp. 724-726.
- M. M. El-Ashmawy, G. D'Auria, M. M. Dehler, J.-Y. Raguin, G. Riddone, and R. Zennaro, “Single Bunch Wakefields in the CERN-PSI-ELETTRA X-band Linear Accelerator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD032, pp. 1997-1999.
- A. Enomoto, “Quick Recovery of the KEK e-/e+ Injector Linac from the Great East Japan Earthquake”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD064, pp. 2669-2671.
- C. H. Gough, S. Ivkovic, and M. Paraliev, “Recent Results from a Combined Diode-RF Gun”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC127, pp. 3182-3184.
- X. Zhou, Y. Ogawa, M. Yoshida, and R. Zhang, “The Developing of the Beam Injection Section with Laser Source and S-Band Electron RF Gun for SuperKEKB Project”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 50-53.
- P. M. Ivanov et al., “Head-Tail Instability at Tevatron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB021, pp. 3062-3064.
- S. Vetter, “Optimization of Lasers in Electron Accelerator Applications”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper WEAO03, unpublished.
- R. M. Stringfield et al., “High Power RF Amplifiers for Accelerator Applications: The Large Orbit Gyrotron and the High Current, Space Charge Enhanced Relativistic Klystron”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO454, pp. 198-200.
- C. Y. Tan and J. Steimel, “The Tevatron Bunch by Bunch Longitudinal Dampers”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB024, pp. 3071-3073.
- P. Bosland et al., “Power Tests of the SOLEIL Cryomodule”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP5B06, pp. 2046-2048.
- R. Stegmann et al., “Installation and Test of a Beam Loss Monitor System for the S-DALINAC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR014, pp. 804-806.
- J. Ruan et al., “Design of an Electro-Optical Sampling Experiment at the AWA Facility”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS011, pp. 3901-3903.
- V. P. Previtali, R. W. Assmann, S. Redaelli, and I. A. Yazynin, “Beam Loss Predictions for the UA9 Crystal Collimation Experiment”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP021, pp. 2829-2831.
- M. Pont, “Operation Status of ALBA Synchrotron Light Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP023, pp. 1659-1661.
- A. Nadji et al., “Commissioning of the SOLEIL Synchroton Radiation Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN009, pp. 932-934.
- V. D. Shiltsev et al., “Channeling and Volume Reflection Based Crystal Collimation of the Tevatron Circulating Beam Halo (T980)”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUOAMH03, pp. 1243-1245.
- C. W. O. Ostenfeld, F. B?©dker, M. B?©ttcher, H. Bach, E. B. Christensen, and M. Pedersen, “Apple-II and TESLA FEL Undulators at Danfysik A/S”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN006, pp. 923-925.
- M. Pont, U. Iriso, R. Muñoz Horta, and F. Perez, “Operation of the ALBA Injector”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC057, pp. 3023-3025.
- B. Singh et al., “Studies to Install a Multipole Wiggler by Removing a Chromatic Sextupole in the Diamond Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3518-3521.
- R. A. Hardin, V. V. Danilov, and C. Deibele, “Experimental Tests of a Prototype System for Active Damping of the e-p Instability in the ORNL SNS Accumulator Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB053, pp. 2809-2811.
- P. Musumeci and J. Moody, “Ultrafast Beam Research at the Pegasus Laboratory”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN021, pp. 2751-2753.
- C. Y. Tan and J. Steimel, “The Tevatron Transverse Dampers”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB025, pp. 3074-3076.
- V. Korchuganov et al., “The Status-2004 of the KURCHATOV Center of SR”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF051, pp. 2386-2388.
- N. Tsoupas, T. Roser, M. Syphers, A. Luccio, and D. Underwood, “Transfer of a Polarized Proton Beam From AGS to RHIC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P001, pp. 207-209.
- M. M. El-Ashmawy and G. D'Auria, “The Short Range Wakefields of the Traveling Wave and Standing Wave X-band Linearizer of FERMI@ELETTRA FEL: A Comparative Study”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD034, pp. 2003-2005.
- C. D. Johnson and L. Thorndahl, “The CPS Gas-Ionization Beam Scanner”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 909-914.
- C. Christou, M. T. Heron, J. Rowland, and S. Gayadeen, “Studies to Optimize the Diamond Light Source Booster Synchrotron as a 100 MeV Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC069, pp. 3053-3055.
- B. Singh, M. Apollonio, E. C. Longhi, R. Bartolini, and T. Pulampong, “Investigation and Test of the Possibility of Reducing the Emittance of the Diamond Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA066, pp. 234-236.
- L. Torino, N. Carmignani, and A. Franchi, “Momentum Compaction Measurement Using Synchrotron Radiation”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 66-70.
Back to search