Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Morita, H. Koiso, Y. Ohnishi, K. Oide, and H. Sugimoto, “Dynamic Aperture Study of SuperKEKB with Beam-beam Effect”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3773-3775. doi:10.18429/JACoW-IPAC2014-THPRI006
[n] H. L. Owen, S. A. Geaney, M. Kenyon, J. K. Jones, and D. J. Scott, “Compact Electron Storage Ring Concepts for EUV and Soft X-ray Production”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 316-318. doi:10.18429/JACoW-IPAC2014-MOPRO098
[n] M. Penno et al., “A configurable Interlock System for RF Stations at XFEL”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEZ03, pp. 159-161.
[n] K. Kato et al., “Measurements of Microwave Cavities Made of Bulk Superconductor YBa2Cu3O7-x”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G21, pp. XX-XX.
[n] A. Rost, T. Galatyuk, and J. Pietraszko, “Research and Development of Diamond Based Beam Monitoring and Diagnostics Systems at the S-DALINAC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 163-165. doi:10.18429/JACoW-IPAC2017-MOPAB038
[n] T. Morishita, H. Asano, and M. Ikegami, “Floor Deformation of J-PARC Linac after the Tohoku Earthquake in Japan”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS049, pp. 2601-2603.
[n] J.-C. Huang, C.-Y. Liu, K.-B. Liu, and Y. S. Wong, “Realization of temperature compensated TPS correction magnet power supply”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3782-3784. doi:10.18429/JACoW-IPAC2023-WEPM089
[n] M. S. Dmitriyev, K. G. Artamonov, O. A. Ivanov, and M. I. Zhigailova, “Magnetic System With Variable Characteristics for a 2.45 GHz ECRIS”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 310-312. doi:10.18429/JACoW-RuPAC2021-TUPSB38
[n] T. Shibata et al., “LEBT Commissioning of the J-PARC LINAC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 251-253. doi:10.18429/JACoW-LINAC2016-MOPLR052
[n] I. Sato and Y. L. Wang, “Study of High Efficiency Linear Accelerator Structure”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO449, pp. 183-185.
[n] C.-Y. Liu, Y. S. Wong, J.-C. Huang, and K.-B. Liu, “Analysis of the bi-bridge topology and power device circuit of the TPS booster dipole power supply”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3779-3781. doi:10.18429/JACoW-IPAC2023-WEPM088
[n] O. A. Ivanov et al., “Active Quasi-Optical Ka-Band RF Pulse Compressor”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP027, pp. 2051-2051.
[n] D. E. Johnson, “The Bzero Low-Beta Insertion Design for the Tevatron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1672-1675.
[n] J. Tamura et al., “Adjustment of the Coupling Factor of the Input Coupler of the ACS Linac by a Capacitive Iris in J-PARC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP090, pp. 264-266.
[n] A. I. Kvasha, “Improving of the INR DTL Tank Accelerating Voltage Stability by Means of the Anode Modulator Feedback”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC021, pp. 366-368.
[n] V. M. Biryukov et al., “Experimental Study of Beam Collimation in Low Energy Proton Rings”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6A04, pp. 1474-1476.
[n] I. Sato et al., “Accelerator Guide of Positron Generator Linac”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-26, pp. 499-501.
[n] J. Zhao et al., “The BEPC Control System Upgraded”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA01, pp. 2193-2195.
[n] F. Zhou, H. K. Ho, D. Cline, and B. Liu, “A Proposal to Experimentally Demonstrate the Novel Vacuum Laser Acceleration”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI071, pp. 1004-1006.
[n] L. Elementi et al., “Mu2e AC Dipole 300 kHz and 5.1 MHz Tests and Comparison of Nickel-Zinc Ferrites”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD017, pp. 3533-3535.
[n] B. L. Monk and A. A. Yakovenko, “Robotic Sample Changer for Remote and Mail-In In Situ X-ray Scattering Experiments and Adjustable Beam Attenuation System”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper WEPC01, pp. XX-XX.
[n] A. L. Vikharev et al., “100 MW Active X-BAND Pulse Compressor”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA169, pp. 1474-1476.
[n] H. Sugimoto, H. Koiso, A. Morita, Y. Ohnishi, and K. Oide, “A Scheme for Horizontal-vertical Coupling Correction at SuperKEKB”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC020, pp. 1203-1205.
[n] E. Kako et al., “High Power RF Tests on Input Couplers for 972MHz Superconducting Cavities in the J-PARC Project”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB062, pp. 1338-1340.
[n] M. Suetake, H. Koiso, Y. Ohnishi, and K. Oide, “Continuous Circumference Control and Timing System for Simultaneous Electron-positron Injection at the KEKB”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH116, pp. 3074-3076.
[n] D. V. Gorelov and P. N. Ostroumov, “Simulation of Beam Dynamics Including Space Charge in Proton Linac with Errors”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4106, pp. 654-656.
[n] N. Ogiwara et al., “A Non-destructive 2D Profile Monitor Using a Gas Sheet”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2190-2192. doi:10.18429/JACoW-IPAC2018-WEPAL018
[n] Y. L. Wang, T. Emoto, M. Nomura, I. Sato, and S. Toyama, “A Novel Chopper System with Very Little Emittance Growth”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1373-1376.
[n] S. K. Esin, T. N. Habibullin, L. V. Kravchuk, V. V. Peplov, V. A. Puntus, and G. V. Romanov, “Adjustment of Meson Factory Linac 991-MHz Accelerating System”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 506-509.
[n] J. Tanaka et al., “The Photon Factory 2.5 GeV Injector Electron Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S1-3, pp. 8-12.
[n] N. Barov, D. J. Newsham, and D. Wu, “Cavity BPM for 1300 MHz Cryomodules”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR088, pp. 993-995.
[n] M. Nomura et al., “Status of High Power CW Linac at PNC”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 745-748.
[n] A. I. Kvasha and V. L. Serov, “Powerful RF Triode as Anode Modulator Vacuum Tube (Part Two)”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 378-381. doi:10.18429/JACoW-RUPAC2018-WEPSB50
[n] S. Toyama, “Analysis of Wake Fields on TWRR Accelerator Structure in PNC”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP26, pp. 390-392.
[n] V. C. Kempson, “Diamond Light Source: Moving from Commissioning to Full Machine Operation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC030, pp. 2052-2054.
[n] L. V. Kravchuk, Y. V. Bylinsky, S. K. Esin, P. N. Ostroumov, and V. L. Serov, “Moscow Meson Factory Linac - Operation and Improvements”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4020, pp. 433-435.
[n] R. G. Eichhorn, S. R. Markham, P. Quigley, and E. N. Smith, “Time Resolved Cryogenic Cooling Analysis of the Cornell Injector Cryomodule”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3443-3445. doi:10.18429/JACoW-IPAC2015-WEPTY071
[n] S. Cleva et al., “Upgrade of the Elettra Magnet Power Supply Controllers”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 495-497. doi:10.18429/JACoW-IPAC2014-MOPME054
[n] J. S. Swieszek, A. Gallifa Terricabras, M. Garlasché, and D. Smakulska, “Novel Approaches in Characterization and Modelling of Fabrication Processes for SRF Components”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 490-495. doi:10.18429/JACoW-SRF2023-TUPTB038
For LaTeX
Use Complete Form
For BibTeX
References
- A. Morita, H. Koiso, Y. Ohnishi, K. Oide, and H. Sugimoto, “Dynamic Aperture Study of SuperKEKB with Beam-beam Effect”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3773-3775.
- H. L. Owen, S. A. Geaney, M. Kenyon, J. K. Jones, and D. J. Scott, “Compact Electron Storage Ring Concepts for EUV and Soft X-ray Production”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 316-318.
- M. Penno et al., “A configurable Interlock System for RF Stations at XFEL”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEZ03, pp. 159-161.
- K. Kato et al., “Measurements of Microwave Cavities Made of Bulk Superconductor YBa2Cu3O7-x”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G21, pp. XX-XX.
- A. Rost, T. Galatyuk, and J. Pietraszko, “Research and Development of Diamond Based Beam Monitoring and Diagnostics Systems at the S-DALINAC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 163-165.
- T. Morishita, H. Asano, and M. Ikegami, “Floor Deformation of J-PARC Linac after the Tohoku Earthquake in Japan”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS049, pp. 2601-2603.
- J.-C. Huang, C.-Y. Liu, K.-B. Liu, and Y. S. Wong, “Realization of temperature compensated TPS correction magnet power supply”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM089, pp. 3782-3784.
- M. S. Dmitriyev, K. G. Artamonov, O. A. Ivanov, and M. I. Zhigailova, “Magnetic System With Variable Characteristics for a 2.45 GHz ECRIS”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 310-312.
- T. Shibata et al., “LEBT Commissioning of the J-PARC LINAC”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 251-253.
- I. Sato and Y. L. Wang, “Study of High Efficiency Linear Accelerator Structure”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO449, pp. 183-185.
- C.-Y. Liu, Y. S. Wong, J.-C. Huang, and K.-B. Liu, “Analysis of the bi-bridge topology and power device circuit of the TPS booster dipole power supply”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM088, pp. 3779-3781.
- O. A. Ivanov et al., “Active Quasi-Optical Ka-Band RF Pulse Compressor”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP027, pp. 2051-2051.
- D. E. Johnson, “The Bzero Low-Beta Insertion Design for the Tevatron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1672-1675.
- J. Tamura et al., “Adjustment of the Coupling Factor of the Input Coupler of the ACS Linac by a Capacitive Iris in J-PARC”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP090, pp. 264-266.
- A. I. Kvasha, “Improving of the INR DTL Tank Accelerating Voltage Stability by Means of the Anode Modulator Feedback”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC021, pp. 366-368.
- V. M. Biryukov et al., “Experimental Study of Beam Collimation in Low Energy Proton Rings”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6A04, pp. 1474-1476.
- I. Sato et al., “Accelerator Guide of Positron Generator Linac”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-26, pp. 499-501.
- J. Zhao et al., “The BEPC Control System Upgraded”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA01, pp. 2193-2195.
- F. Zhou, H. K. Ho, D. Cline, and B. Liu, “A Proposal to Experimentally Demonstrate the Novel Vacuum Laser Acceleration”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI071, pp. 1004-1006.
- L. Elementi et al., “Mu2e AC Dipole 300 kHz and 5.1 MHz Tests and Comparison of Nickel-Zinc Ferrites”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD017, pp. 3533-3535.
- B. L. Monk and A. A. Yakovenko, “Robotic Sample Changer for Remote and Mail-In In Situ X-ray Scattering Experiments and Adjustable Beam Attenuation System”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper WEPC01, pp. XX-XX.
- A. L. Vikharev et al., “100 MW Active X-BAND Pulse Compressor”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA169, pp. 1474-1476.
- H. Sugimoto, H. Koiso, A. Morita, Y. Ohnishi, and K. Oide, “A Scheme for Horizontal-vertical Coupling Correction at SuperKEKB”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC020, pp. 1203-1205.
- E. Kako et al., “High Power RF Tests on Input Couplers for 972MHz Superconducting Cavities in the J-PARC Project”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB062, pp. 1338-1340.
- M. Suetake, H. Koiso, Y. Ohnishi, and K. Oide, “Continuous Circumference Control and Timing System for Simultaneous Electron-positron Injection at the KEKB”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH116, pp. 3074-3076.
- D. V. Gorelov and P. N. Ostroumov, “Simulation of Beam Dynamics Including Space Charge in Proton Linac with Errors”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4106, pp. 654-656.
- N. Ogiwara et al., “A Non-destructive 2D Profile Monitor Using a Gas Sheet”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2190-2192.
- Y. L. Wang, T. Emoto, M. Nomura, I. Sato, and S. Toyama, “A Novel Chopper System with Very Little Emittance Growth”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1373-1376.
- S. K. Esin, T. N. Habibullin, L. V. Kravchuk, V. V. Peplov, V. A. Puntus, and G. V. Romanov, “Adjustment of Meson Factory Linac 991-MHz Accelerating System”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 506-509.
- J. Tanaka et al., “The Photon Factory 2.5 GeV Injector Electron Linac”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S1-3, pp. 8-12.
- N. Barov, D. J. Newsham, and D. Wu, “Cavity BPM for 1300 MHz Cryomodules”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR088, pp. 993-995.
- M. Nomura et al., “Status of High Power CW Linac at PNC”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 745-748.
- A. I. Kvasha and V. L. Serov, “Powerful RF Triode as Anode Modulator Vacuum Tube (Part Two)”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 378-381.
- S. Toyama, “Analysis of Wake Fields on TWRR Accelerator Structure in PNC”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP26, pp. 390-392.
- V. C. Kempson, “Diamond Light Source: Moving from Commissioning to Full Machine Operation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC030, pp. 2052-2054.
- L. V. Kravchuk, Y. V. Bylinsky, S. K. Esin, P. N. Ostroumov, and V. L. Serov, “Moscow Meson Factory Linac - Operation and Improvements”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4020, pp. 433-435.
- R. G. Eichhorn, S. R. Markham, P. Quigley, and E. N. Smith, “Time Resolved Cryogenic Cooling Analysis of the Cornell Injector Cryomodule”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3443-3445.
- S. Cleva et al., “Upgrade of the Elettra Magnet Power Supply Controllers”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 495-497.
- J. S. Swieszek, A. Gallifa Terricabras, M. Garlasché, and D. Smakulska, “Novel Approaches in Characterization and Modelling of Fabrication Processes for SRF Components”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB038, pp. 490-495.
Back to search