Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Xie, “On Analog Simulation of Ionization Cooling of Muons”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH086, pp. 3879-3881.
[n] T. Norimine, K. Hiramoto, and M. Umezawa, “A Design of a Rotating Gantry with Easy Steering for Proton Therapy”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI094, pp. 2751-2753.
[n] U. Hahn et al., “Design and Tests of a New Microwave Beam Position Monitor for the Undulator of the TTF-FEL”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP40G, pp. 1541-1543.
[n] J. Smedley et al., “In Situ Characterization of ALKALI Antimonide Photocathodes”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO76, pp. 403-405.
[n] K. Yamada, T. Hosokawa, and M. Nakajima, “Reduction of the Dynamic Field Deviation in Series-Connected Superconducting Magnets for Compact Storage Ring”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1154-1157.
[n] W. E. Cooper, B. C. Brown, R. W. Hanft, and E. E. Schmidt, “Long Term Stability of Fermilab Energy Saver Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3330-3333.
[n] W. Li, H. Hao, Y. K. Wu, and W. Xu, “Direct and High Resolution Beta-Function Measurements for Storage Ring Lattice Characterization”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3272-3274. doi:10.18429/JACoW-IPAC2016-THPMB022
[n] V. P. Nagaslaev and I. L. Rakhno, “MARS Tracking Simulations for the Mu2e Slow Extracted Proton Beam”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4010-4012. doi:10.18429/JACoW-IPAC2015-THPF125
[n] T. Shaftan et al., “Microbunching and Beam Break-up in DUV FEL Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPD005, pp. 329-331.
[n] M. Broseta et al., “Embedded Control System for Programmable Multi-Purpose Instruments”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 80-83. doi:10.18429/JACoW-PCAPAC2016-THDAPLCO01
[n] T. Fujisawa et al., “Radio Frequency System of the RIKEN Ring Cyclotron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1096-1099.
[n] K. Saadatmand and N. C. Okay, “Performance of the SSC RF-Driven Volume Source”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-21, pp. 97-99.
[n] M. P. Stockli et al., “Low-Energy Emittance Studies with the New SNS Allison Emittance Scanner”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP012, pp. 3974-3976.
[n] H. Leboutet, G. Azam, R. Bensussan, B. Delmon, J. P. Mangin, and J. Soffer, “Some Characteristic Problems of the New High Duty Cycle Saclay Electron Linac”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VIII-06, pp. 426-434.
[n] X. P. Ding, J. J. Back, H. G. Kirk, and K. T. McDonald, “Optimization of Particle Production for a Staged Neutrino Factory”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA11, pp. 1379-1381.
[n] M. S. de Jong and F. P. Adams, “Cavity RF Mode Analysis Using a Boundary-Integral Method”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 835-838.
[n] I. Chaikovska, C. Bruni, S. Chanc?®, A. R. Gamelin, H. Monard, and A. Loulergue, “Status of the Preparation to the Commissioning of the ThomX Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 833-836. doi:10.18429/JACoW-IPAC2016-MOPOW052
[n] S. Matsumoto et al., “High Power Testing Results of the X-Band Mixed-Mode RF Windows for Linear Colliders”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA02, pp. 736-738.
[n] G. Hill, E. Laukant, R. Sheldon, and G. B. Stapleton, “The Use of Radiation Sensitive Materials on High Power Accelerators”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 761-764.
[n] C. J. Bocchetta, L. Tosi, R. P. Walker, and A. Wrulich, “Studies of the Effects of an Elliptical Wiggler in ELETTRA”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 667-670.
[n] J. P. Dai, B. Ni, J. Y. Zhai, and J. R. Zhang, “Design Study of a Compact Deflecting Cavity at IHEP”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2188-2190. doi:10.18429/JACoW-IPAC2016-WEPMB030
[n] C. E. Mayes and N. Nakamura, “ERL2011 Summary of Working Group 2 Beam Dynamics”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper WG2000, pp. 36-48.
[n] F. J. Decker, “Design and Wakefield Performance of the New SLC Collimators”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP34, pp. 137-139.
[n] D. Bostic, U. Cummings, N. Dean, B. Jeong, and J. Jurow, “Vacuum System for the Stanford-LBL Storage Ring (PEP)”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1540-1544.
[n] L. Tosi and R. Nagaoka, “Effects of Helical Undulators on Beam Dynamics”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1423-1426.
[n] S. Arsenyev, D. Y. Shchegolkov, E. I. Simakov, C. H. Boulware, T. L. Grimm, and A. Rogacki, “Five-cell Superconducting RF Module with a PBG Coupler Cell: Design and Cold Testing of the Copper Prototype”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3475-3478. doi:10.18429/JACoW-IPAC2015-WEPTY083
[n] J. T. Seeman, M. Browne, P. Emma, T. Himel, K. Jobe, and N. Walker, “Linac Final Focus Feed-Forward for Increasing the SLC Luminosity”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1376-1379.
[n] Y. Chiba, K. Ohtomo, T. Rizawa, and M. Wakasugi, “Ferrite Evaluation Test for MUSES”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B13, pp. 1987-1989.
[n] F. Gerigk, J.-M. Giguet, P. Ugena Tirado, and R. Wegner, “High Power Test of the First PIMS Cavity for Linac4”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC055, pp. 205-207.
[n] D. Xiang, Z. Huang, D. F. Ratner, and G. V. Stupakov, “Feasibility Study for a Seeded Hard X-ray Source Based on a Two-Stage Echo-Enabled Harmonic Generation FEL”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC79, pp. 192-195.
[n] L. H. Harwood, M. Fowler, R. Fox, H. Hanawa, J. A. Nolen, and A. F. Zeller, “Characteristics and Performance of the System Developed for Magnetic Mapping of the NSCL Superconducting K800 Cyclotron Magnet”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3734-3737.
[n] J. Jiang, H. B. Chen, J. Shi, P. Wang, L. Zhang, and S. X. Zheng, “C-Band Deflecting Cavity for Bunch Length Measurement of 2.5 MeV Electron Beam”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 386-388. doi:10.18429/JACoW-IPAC2016-MOPMR060
[n] S. J. Full et al., “A Fast Rotating Wire Scanner for use in High Current Accelerators”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOBA1, pp. 385-387.
[n] G. H. Mackenzie, M. Dombsky, W. R. Rawnsley, G. Stanford, Y. Yin, and A. Novikov, “Beam Instrumentation for an ISOL Test Stand”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-35, pp. 298-301.
[n] J. J. Kritzinger, A. H. Botha, P. M. Cronje, P. R. de Kock, R. E. F. Fenemore, and M. J. van Niekerk, “Pulse Selection and Rebunching in the NAC Transfer Beamline”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-15, pp. 384-387.
[n] R. M. Ronningen, T. A. Antaya, M. L. Mallory, and P. S. Miller, “New Radiation Hazards at the K500 Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I7-06, pp. 542-544.
[n] P. J. Viccaro, D. W. Carnegie, and R. Savoy, “Magnetic Field Tolerances for Insertion Devices on Third Generation Sychrotron Light Sources”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1091-1096.
[n] H. A. Koivisto et al., “HIISI, New 18 GHz ECRIS for the JYFL Accelerator Laboratory”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper TUOMMH05, pp. 99-103.
[n] J. Xu, J. D. Fox, and D. Van Winkle, “Multi-Bunch Beam Signal Generator for Feedback Receiver Development”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF028, pp. 167-171.
[n] S. Lenci, E. L. Eisen, and M. P. McCarthy, “Status of the 805-MHz Pulsed Klystrons for the Spallation Neutron Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD025, pp. 499-501.
[n] A. S. Artiomov, “Correlation Method of Measurements of Ion Beam Parameters”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2169-2172.
[n] J. J. Chang, S. An, X. J. Liu, P. P. Wang, Y. J. Yuan, and W. Zhang, “New Control System for LAPECR2”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 394-396. doi:10.18429/JACoW-ICALEPCS2017-TUPHA012
[n] J. Calvey et al., “Electron Cloud Mitigation Investigations at CesrTA”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper MIT01, pp. 41-45.
[n] J. Pflueger et al., “Status of the Undulator Systems for the European X-ray Free Electron Laser”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO60, pp. 367-371.
[n] W. Lawson et al., “Initial Operation of the Maryland Coaxial Gyroklystron Experiment”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P038, pp. 3168-3170.
[n] R. A. Baartman, G. Franchetti, and E. M?®tral, “Summary of Group A: Beam Dynamics in High Intensity Circular Machines”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper CPL01, pp. 482-484.
[n] C.Zhang, “An overview of the BEPCII project”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper MOACH01, pp. XX-XX.
[n] W. Bartmann et al., “Injection and Dump Systems for a 13.5 TeV Hadron Synchrotron HE-LHC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 858-861. doi:10.18429/JACoW-IPAC2018-TUPAF060
[n] J. Santander-Vela, L. Pivetta, and N. P. Rees, “Status of the Square Kilometre Array”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1982-1988. doi:10.18429/JACoW-ICALEPCS2017-FRAPL01
[n] D. Wang et al., “Optimization Parameter Design of a Circular e+e- Higgs Factory”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME021, pp. 1616-1618.
[n] B. G?Ñlnander et al., “Status of Design Work Towards an Electron Cooler for HESR”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP10, pp. 182-186.
[n] M. Kinsho, F. Noda, J. Kusano, and M. Mizumoto, “A Study of the Proton Storage Ring for the Neutron Science Project at JAERI”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D013, pp. 411-413.
[n] H. Lengeler, “Proposals for Spallation Sources in Europe”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 249-254.
[n] R. L. Geng et al., “First RF Test at 4.2K of a 200MHz Superconducting Nb-Cu Cavity”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB049, pp. 1309-1311.
[n] O. Gal, M. Abs, J.-M. Capdevila, F. Genin, Y. Jongen, and A. Nguyen, “Optical Properties of the Rhodotron Bending Magnets”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1048-1051.
[n] G. Kube et al., “PETRA III Diagnostics Beamline for Emittance Measurements”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD089, pp. 909-911.
[n] A. H. Botha et al., “Present Status and New Developments at NAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6A14, pp. 533-535.
[n] S. Boychenko et al., “Second Generation LHC Analysis Framework: Workload-based and User-oriented Solution”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2784-2787. doi:10.18429/JACoW-IPAC2016-WEPOR051
[n] B. T. Leemann, “Systematic Study of the Dependence of Lattice Dynamics on Cell Structure Parameters”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1143-1146.
[n] R. Akre, G. Barillas, and M. Mitchell, “Calibration System for SLC 476 MHz to 2856 MHz Multipliers”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P024, pp. 3024-3026.
[n] U. Ratzinger et al., “The Frankfurt Neutron Source FRANZ”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC059, pp. 597-599.
[n] H. Sakamoto, “Status of the MICE Tracker System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE017, pp. 996-998.
[n] F. Gerigk, J.-M. Giguet, E. Montesinos, B. Riffaud, P. Ugena Tirado, and R. Wegner, “The Linac4 Power Coupler”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC056, pp. 208-210.
[n] X. Kang et al., “Asymmetric Hopf Bifurcation for Proton Beams with Electron Cooling”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAP21, pp. 2934-2936.
[n] M. Zach et al., “Auxiliary Accelerating System for TRIUMF Cyclotron”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 973-976.
[n] V. P. Derenchuk and A. S. Belov, “A Multi-Milliampere Polarized and Unpolarized Negative Ion Source for IUCF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH008, pp. 2093-2095.
[n] Y. Hashimoto et al., “Development of a Beam Profile Monitor using a Nitrogen-Molecular Jet for the J-PARC MR”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF17, pp. 848-851.
[n] A. Ando, A. Araki, and M. Kihara, “Prototype Multipole Magnets for the KEK Main Ring”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1266-1269.
[n] H. S. Kim et al., “Reinforcement Learning Based RF Control System for Accelerator Mass Spectrometry”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 227-229. doi:10.18429/JACoW-CYCLOTRONS2019-TUP030
[n] T. Kikuchi, K. Horioka, and S. Kawata, “Particle Dynamics at Stagnation Point during Longitudinal Bunch Compression of High Current Beams”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN049, pp. 3339-3341.
[n] Y. Li, Y. W. An, Z. P. Li, W. B. Liu, and S. Wang, “Transport Line Orbit Correction for CSNS/RTBT”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA036, pp. 154-156.
[n] D. Bulfone, A. Carniel, J.-C. Denard, F. Iazzourene, R. Richter, and A. Wrulich, “Design Considerations for the ELETTRA Beam Position Feedback Systems”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 895-898.
[n] T. Ilg et al., “Mechanical Design of the Drift-Tube Linac (DTL) for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB051, pp. 2841-2843.
[n] J. Cerino and R. Cronin, “Beryllium Windows for Synchrotron Radiation Beam Lines”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3816-3819.
[n] M. Yu, D. J. Harding, and G. Velev, “Dipole Corrector Magnets for the LBNE Beam Line”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP152, pp. 1115-1117.
[n] H. Gang, T. Dechun, H. Wenhui, and Z. T. Zhao, “Longitudinal Broadband Impedance Measurement System by Coaxial Line Methods”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH312, pp. 2060-2062.
[n] R. Tomas, H.-H. Braun, M. Jorgensen, and D. Schulte, “Optimizing the CLIC Beam Delivery System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP038, pp. 631-633.
[n] K. Bertsche et al., “PEP-II status”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper MOACH05, pp. XX-XX.
[n] P. M. McIntyre, N. Pogue, R. Romero, and A. Sattarov, “Polyhedral Cavity Structure for Linac Colliders”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS002, pp. 2325-2327.
[n] K. T. Chen, C. H. Kuo, and K. K. Lin, “Design and Implementation of a Digital Receiver Based Tune Monitor”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP43C, pp. 1529-1531.
[n] K. Foraz et al., “Scheduling the Powering Tests”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP010, pp. 2545-2547.
[n] M. J. Barnes, M. G. Atanasov, T. Fowler, T. Kramer, and T. Stadlbauer, “Effect of a Metallized Chamber upon the Field Response of a Kicker Magnet: Simulation Results and Analytical Calculations”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD074, pp. 3686-3688.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Xie, “On Analog Simulation of Ionization Cooling of Muons”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH086, pp. 3879-3881.
- T. Norimine, K. Hiramoto, and M. Umezawa, “A Design of a Rotating Gantry with Easy Steering for Proton Therapy”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI094, pp. 2751-2753.
- U. Hahn et al., “Design and Tests of a New Microwave Beam Position Monitor for the Undulator of the TTF-FEL”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP40G, pp. 1541-1543.
- J. Smedley et al., “In Situ Characterization of ALKALI Antimonide Photocathodes”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO76, pp. 403-405.
- K. Yamada, T. Hosokawa, and M. Nakajima, “Reduction of the Dynamic Field Deviation in Series-Connected Superconducting Magnets for Compact Storage Ring”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1154-1157.
- W. E. Cooper, B. C. Brown, R. W. Hanft, and E. E. Schmidt, “Long Term Stability of Fermilab Energy Saver Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3330-3333.
- W. Li, H. Hao, Y. K. Wu, and W. Xu, “Direct and High Resolution Beta-Function Measurements for Storage Ring Lattice Characterization”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3272-3274.
- V. P. Nagaslaev and I. L. Rakhno, “MARS Tracking Simulations for the Mu2e Slow Extracted Proton Beam”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4010-4012.
- T. Shaftan et al., “Microbunching and Beam Break-up in DUV FEL Accelerator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPD005, pp. 329-331.
- M. Broseta et al., “Embedded Control System for Programmable Multi-Purpose Instruments”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 80-83.
- T. Fujisawa et al., “Radio Frequency System of the RIKEN Ring Cyclotron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1096-1099.
- K. Saadatmand and N. C. Okay, “Performance of the SSC RF-Driven Volume Source”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-21, pp. 97-99.
- M. P. Stockli et al., “Low-Energy Emittance Studies with the New SNS Allison Emittance Scanner”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP012, pp. 3974-3976.
- H. Leboutet, G. Azam, R. Bensussan, B. Delmon, J. P. Mangin, and J. Soffer, “Some Characteristic Problems of the New High Duty Cycle Saclay Electron Linac”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper VIII-06, pp. 426-434.
- X. P. Ding, J. J. Back, H. G. Kirk, and K. T. McDonald, “Optimization of Particle Production for a Staged Neutrino Factory”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA11, pp. 1379-1381.
- M. S. de Jong and F. P. Adams, “Cavity RF Mode Analysis Using a Boundary-Integral Method”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 835-838.
- I. Chaikovska, C. Bruni, S. Chanc?®, A. R. Gamelin, H. Monard, and A. Loulergue, “Status of the Preparation to the Commissioning of the ThomX Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 833-836.
- S. Matsumoto et al., “High Power Testing Results of the X-Band Mixed-Mode RF Windows for Linear Colliders”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THA02, pp. 736-738.
- G. Hill, E. Laukant, R. Sheldon, and G. B. Stapleton, “The Use of Radiation Sensitive Materials on High Power Accelerators”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 761-764.
- C. J. Bocchetta, L. Tosi, R. P. Walker, and A. Wrulich, “Studies of the Effects of an Elliptical Wiggler in ELETTRA”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 667-670.
- J. P. Dai, B. Ni, J. Y. Zhai, and J. R. Zhang, “Design Study of a Compact Deflecting Cavity at IHEP”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2188-2190.
- C. E. Mayes and N. Nakamura, “ERL2011 Summary of Working Group 2 Beam Dynamics”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper WG2000, pp. 36-48.
- F. J. Decker, “Design and Wakefield Performance of the New SLC Collimators”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP34, pp. 137-139.
- D. Bostic, U. Cummings, N. Dean, B. Jeong, and J. Jurow, “Vacuum System for the Stanford-LBL Storage Ring (PEP)”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1540-1544.
- L. Tosi and R. Nagaoka, “Effects of Helical Undulators on Beam Dynamics”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1423-1426.
- S. Arsenyev, D. Y. Shchegolkov, E. I. Simakov, C. H. Boulware, T. L. Grimm, and A. Rogacki, “Five-cell Superconducting RF Module with a PBG Coupler Cell: Design and Cold Testing of the Copper Prototype”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3475-3478.
- J. T. Seeman, M. Browne, P. Emma, T. Himel, K. Jobe, and N. Walker, “Linac Final Focus Feed-Forward for Increasing the SLC Luminosity”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1376-1379.
- Y. Chiba, K. Ohtomo, T. Rizawa, and M. Wakasugi, “Ferrite Evaluation Test for MUSES”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4B13, pp. 1987-1989.
- F. Gerigk, J.-M. Giguet, P. Ugena Tirado, and R. Wegner, “High Power Test of the First PIMS Cavity for Linac4”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC055, pp. 205-207.
- D. Xiang, Z. Huang, D. F. Ratner, and G. V. Stupakov, “Feasibility Study for a Seeded Hard X-ray Source Based on a Two-Stage Echo-Enabled Harmonic Generation FEL”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC79, pp. 192-195.
- L. H. Harwood, M. Fowler, R. Fox, H. Hanawa, J. A. Nolen, and A. F. Zeller, “Characteristics and Performance of the System Developed for Magnetic Mapping of the NSCL Superconducting K800 Cyclotron Magnet”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3734-3737.
- J. Jiang, H. B. Chen, J. Shi, P. Wang, L. Zhang, and S. X. Zheng, “C-Band Deflecting Cavity for Bunch Length Measurement of 2.5 MeV Electron Beam”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 386-388.
- S. J. Full et al., “A Fast Rotating Wire Scanner for use in High Current Accelerators”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOBA1, pp. 385-387.
- G. H. Mackenzie, M. Dombsky, W. R. Rawnsley, G. Stanford, Y. Yin, and A. Novikov, “Beam Instrumentation for an ISOL Test Stand”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-35, pp. 298-301.
- J. J. Kritzinger, A. H. Botha, P. M. Cronje, P. R. de Kock, R. E. F. Fenemore, and M. J. van Niekerk, “Pulse Selection and Rebunching in the NAC Transfer Beamline”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I2-15, pp. 384-387.
- R. M. Ronningen, T. A. Antaya, M. L. Mallory, and P. S. Miller, “New Radiation Hazards at the K500 Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I7-06, pp. 542-544.
- P. J. Viccaro, D. W. Carnegie, and R. Savoy, “Magnetic Field Tolerances for Insertion Devices on Third Generation Sychrotron Light Sources”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1091-1096.
- H. A. Koivisto et al., “HIISI, New 18 GHz ECRIS for the JYFL Accelerator Laboratory”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper TUOMMH05, pp. 99-103.
- J. Xu, J. D. Fox, and D. Van Winkle, “Multi-Bunch Beam Signal Generator for Feedback Receiver Development”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF028, pp. 167-171.
- S. Lenci, E. L. Eisen, and M. P. McCarthy, “Status of the 805-MHz Pulsed Klystrons for the Spallation Neutron Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD025, pp. 499-501.
- A. S. Artiomov, “Correlation Method of Measurements of Ion Beam Parameters”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2169-2172.
- J. J. Chang, S. An, X. J. Liu, P. P. Wang, Y. J. Yuan, and W. Zhang, “New Control System for LAPECR2”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 394-396.
- J. Calvey et al., “Electron Cloud Mitigation Investigations at CesrTA”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper MIT01, pp. 41-45.
- J. Pflueger et al., “Status of the Undulator Systems for the European X-ray Free Electron Laser”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO60, pp. 367-371.
- W. Lawson et al., “Initial Operation of the Maryland Coaxial Gyroklystron Experiment”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P038, pp. 3168-3170.
- R. A. Baartman, G. Franchetti, and E. M?®tral, “Summary of Group A: Beam Dynamics in High Intensity Circular Machines”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper CPL01, pp. 482-484.
- C.Zhang, “An overview of the BEPCII project”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper MOACH01, pp. XX-XX.
- W. Bartmann et al., “Injection and Dump Systems for a 13.5 TeV Hadron Synchrotron HE-LHC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 858-861.
- J. Santander-Vela, L. Pivetta, and N. P. Rees, “Status of the Square Kilometre Array”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1982-1988.
- D. Wang et al., “Optimization Parameter Design of a Circular e+e- Higgs Factory”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME021, pp. 1616-1618.
- B. G?Ñlnander et al., “Status of Design Work Towards an Electron Cooler for HESR”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper THAP10, pp. 182-186.
- M. Kinsho, F. Noda, J. Kusano, and M. Mizumoto, “A Study of the Proton Storage Ring for the Neutron Science Project at JAERI”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D013, pp. 411-413.
- H. Lengeler, “Proposals for Spallation Sources in Europe”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 249-254.
- R. L. Geng et al., “First RF Test at 4.2K of a 200MHz Superconducting Nb-Cu Cavity”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB049, pp. 1309-1311.
- O. Gal, M. Abs, J.-M. Capdevila, F. Genin, Y. Jongen, and A. Nguyen, “Optical Properties of the Rhodotron Bending Magnets”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1048-1051.
- G. Kube et al., “PETRA III Diagnostics Beamline for Emittance Measurements”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD089, pp. 909-911.
- A. H. Botha et al., “Present Status and New Developments at NAC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6A14, pp. 533-535.
- S. Boychenko et al., “Second Generation LHC Analysis Framework: Workload-based and User-oriented Solution”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2784-2787.
- B. T. Leemann, “Systematic Study of the Dependence of Lattice Dynamics on Cell Structure Parameters”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1143-1146.
- R. Akre, G. Barillas, and M. Mitchell, “Calibration System for SLC 476 MHz to 2856 MHz Multipliers”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P024, pp. 3024-3026.
- U. Ratzinger et al., “The Frankfurt Neutron Source FRANZ”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC059, pp. 597-599.
- H. Sakamoto, “Status of the MICE Tracker System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE017, pp. 996-998.
- F. Gerigk, J.-M. Giguet, E. Montesinos, B. Riffaud, P. Ugena Tirado, and R. Wegner, “The Linac4 Power Coupler”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC056, pp. 208-210.
- X. Kang et al., “Asymmetric Hopf Bifurcation for Proton Beams with Electron Cooling”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAP21, pp. 2934-2936.
- M. Zach et al., “Auxiliary Accelerating System for TRIUMF Cyclotron”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 973-976.
- V. P. Derenchuk and A. S. Belov, “A Multi-Milliampere Polarized and Unpolarized Negative Ion Source for IUCF”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH008, pp. 2093-2095.
- Y. Hashimoto et al., “Development of a Beam Profile Monitor using a Nitrogen-Molecular Jet for the J-PARC MR”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF17, pp. 848-851.
- A. Ando, A. Araki, and M. Kihara, “Prototype Multipole Magnets for the KEK Main Ring”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1266-1269.
- H. S. Kim et al., “Reinforcement Learning Based RF Control System for Accelerator Mass Spectrometry”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 227-229.
- T. Kikuchi, K. Horioka, and S. Kawata, “Particle Dynamics at Stagnation Point during Longitudinal Bunch Compression of High Current Beams”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN049, pp. 3339-3341.
- Y. Li, Y. W. An, Z. P. Li, W. B. Liu, and S. Wang, “Transport Line Orbit Correction for CSNS/RTBT”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA036, pp. 154-156.
- D. Bulfone, A. Carniel, J.-C. Denard, F. Iazzourene, R. Richter, and A. Wrulich, “Design Considerations for the ELETTRA Beam Position Feedback Systems”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 895-898.
- T. Ilg et al., “Mechanical Design of the Drift-Tube Linac (DTL) for the Spallation Neutron Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB051, pp. 2841-2843.
- J. Cerino and R. Cronin, “Beryllium Windows for Synchrotron Radiation Beam Lines”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3816-3819.
- M. Yu, D. J. Harding, and G. Velev, “Dipole Corrector Magnets for the LBNE Beam Line”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP152, pp. 1115-1117.
- H. Gang, T. Dechun, H. Wenhui, and Z. T. Zhao, “Longitudinal Broadband Impedance Measurement System by Coaxial Line Methods”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH312, pp. 2060-2062.
- R. Tomas, H.-H. Braun, M. Jorgensen, and D. Schulte, “Optimizing the CLIC Beam Delivery System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP038, pp. 631-633.
- K. Bertsche et al., “PEP-II status”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper MOACH05, pp. XX-XX.
- P. M. McIntyre, N. Pogue, R. Romero, and A. Sattarov, “Polyhedral Cavity Structure for Linac Colliders”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS002, pp. 2325-2327.
- K. T. Chen, C. H. Kuo, and K. K. Lin, “Design and Implementation of a Digital Receiver Based Tune Monitor”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP43C, pp. 1529-1531.
- K. Foraz et al., “Scheduling the Powering Tests”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP010, pp. 2545-2547.
- M. J. Barnes, M. G. Atanasov, T. Fowler, T. Kramer, and T. Stadlbauer, “Effect of a Metallized Chamber upon the Field Response of a Kicker Magnet: Simulation Results and Analytical Calculations”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD074, pp. 3686-3688.
Back to search