Favourites
For Word
[n] K. Balewski et al., “Preliminary Study of Electron Cooling Possibility of Hadronic Beams at PETRA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP36G, pp. 1079-1081.
[n] K. M. Hock and A. Wolski, “An Elementary Analysis of Coupled-Bunch Instabilities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN078, pp. 3399-3401.
[n] G. M. Wang, Y. Li, T. V. Shaftan, L. Yang, and L.-H. Yu, “NSLS-II Storage Ring Coupling Measurement and Correction”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1983-1985. doi:10.18429/JACoW-IPAC2015-TUPHA009
[n] S. N. Galyamin, A. A. Grigoreva, A. V. Tyukhtin, and V. V. Vorobev, “Beam-Driven Terahertz Source Based on Open Ended Waveguide with a Dielectric Layer: Rigorous Approach”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2578-2580. doi:10.18429/JACoW-IPAC2015-WEPWA037
[n] M. Dolinska, C. Dimopoulou, A. Dolinskii, F. Nolden, and M. Steck, “Numerical Algorithm based on the PDE Method for the Solution of the Fokker-Planck Equation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC123, pp. 2298-2300.
[n] Y. Watanabe, T. Adachi, S. Igarashi, H. Someya, and N. Tani, “Rapid-cycling Power Supplies for the J-PARC RCS Sextupole Magnets”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO003, pp. 3338-3340.
[n] B. Mustapha, P. N. Ostroumov, and A. Perry, “Progress and Design Studies for the ATLAS Multi-User Upgrade”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 610-612. doi:10.18429/JACoW-LINAC2016-TUPLR068
[n] W. Herr, “MOPS - A Data Structure Management System for the LEP/SPS Control System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1713-1716.
[n] F. Wang and C. Adolphsen, “Processing and Breakdown Localization Results for an L-Band Standing-Wave Cavity”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP017, pp. 2024-2026.
[n] Z. Li et al., “RDDS Cell Design and Optimization for the Linear Collider Linacs”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA41, pp. 3480-3482.
[n] Y. Morozumi, F. Furuta, T. Higo, T. Saeki, and K. Saito, “Revision of Accelerating and Damping Structures for KEK STF 45 MV/m Accelerator Modules”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAKI03, pp. 2575-2577.
[n] J. Claus, M. Cornacchia, and G. Parzen, “”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3552-3556.
[n] P. Emma, “Phase Slip in an Undulator with Pole and BPM Errors”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH116, pp. 2742-2744.
[n] F. Naito et al., “Beam Commissioning of the i-BNCT Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 760-762. doi:10.18429/JACoW-LINAC2016-THOP08
[n] E. A. Peralta, R. L. Byer, E. R. Colby, R. J. England, C. McGuinness, and K. Soong, “Fabrication and Measurement of Dual Layer Silica Grating Structures for Direct Laser Acceleration”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP096, pp. 280-282.
[n] T. Shishido, E. Kako, and S. Noguchi, “Development of Pre-tuning System for 972 MHz 9-Cell Superconducting Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP42, pp. 425-428.
[n] R. Brinkmann, O. Napoly, J. Payet, and N. Walker, “A New Beam Delivery System BDS for the TESLA Linear Collider”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3B14, pp. 513-515.
[n] M. Chen, C. A. Cooper, and L. Ristori, “Multistep Mechanical Analyses of Centrifugal Barrel Polishing Barrel and Cavity”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO054, pp. 2426-2428.
[n] L. Liao, W. Fang, Q. Gu, M. Zhang, and M. H. Zhao, “Studying of Multipacting in Micro-pulse Electron Gun”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI045, pp. 383-385.
[n] L. Ristori et al., “Fabrication and Testing of SSR1 Resonators for PXIE”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO055, pp. 2429-2431.
[n] J. Y. Tang, “First Ever Ionization Cooling Demonstration in MICE”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 632-636. doi:10.18429/JACoW-LINAC2018-TH1A01
[n] F. M?®ot, B. Autin, and A. Verdier, “A New Pion Collection System for the CERN Neutrino Factory”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI061, pp. 347-349.
[n] T. Morishita et al., “Fabrication of the New RFQ for the J-PARC Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD044, pp. 783-785.
[n] S. Wang et al., “Capture, Acceleration and Bunching RF Systems for the MEIC Booster and Storage Rings”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2318-2321. doi:10.18429/JACoW-IPAC2015-TUPWI034
[n] M. Meddahi et al., “CERN Neutrinos to Gran Sasso (CNGS): Results from Commissioning”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOAKI02, pp. 692-694.
[n] H. D. Zhang et al., “Beam Halo Measurements using Adaptive Masking Methods and Proposed Recent Halo Experiment”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP260, pp. 215-218.
[n] A. A. Glazov, “Commissioning of the JINR Phasotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper F-04, pp. 199-202.
[n] M. Tigner, “Bar Loaded Waveguide for Accelerator Service”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 249-251.
[n] S. Benedetti, A. Grudiev, and A. Latina, “Design of a 750 MHz IH Structure for Medical Applications”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 240-243. doi:10.18429/JACoW-LINAC2016-MOPLR049
[n] K. Saito et al., “Discovery of the Needless of Outgas Annealing after Horizontally Continuously Rotated Electropolishing with Niobium Superconducting RF Cavities”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP032, pp. 283-287.
[n] T. J. Roberts, M. A. C. Cummings, R. P. Johnson, and D. V. Neuffer, “MuSim, a Graphical User Interface for Multiple Simulation Programs”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1559-1561. doi:10.18429/JACoW-IPAC2016-TUPMY009
[n] D. V. Neuffer and Y. I. Alexahin, “Front End and HFOFO Snake for a Muon Facility”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper THYAUD02, pp. 150-154.
[n] R. Brinkmann, “A Simulation Study for the Beam-Beam Interaction of Protons with a Flat Electron Beam in HERA”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1720-1723.
[n] V. Vogel et al., “Operation of an L-band RF Gun with Pulses Inside the Burst Mode RF Pulse”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC111, pp. 3146-3148.
[n] G. V. Romanov, P. Berrutti, and T. N. Khabiboulline, “Simulation of Multipacting in SC Low Beta Cavities at FNAL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 579-581. doi:10.18429/JACoW-IPAC2015-MOPMA018
For LaTeX
Use Complete Form
For BibTeX
References
- K. Balewski et al., “Preliminary Study of Electron Cooling Possibility of Hadronic Beams at PETRA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP36G, pp. 1079-1081.
- K. M. Hock and A. Wolski, “An Elementary Analysis of Coupled-Bunch Instabilities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN078, pp. 3399-3401.
- G. M. Wang, Y. Li, T. V. Shaftan, L. Yang, and L.-H. Yu, “NSLS-II Storage Ring Coupling Measurement and Correction”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1983-1985.
- S. N. Galyamin, A. A. Grigoreva, A. V. Tyukhtin, and V. V. Vorobev, “Beam-Driven Terahertz Source Based on Open Ended Waveguide with a Dielectric Layer: Rigorous Approach”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2578-2580.
- M. Dolinska, C. Dimopoulou, A. Dolinskii, F. Nolden, and M. Steck, “Numerical Algorithm based on the PDE Method for the Solution of the Fokker-Planck Equation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC123, pp. 2298-2300.
- Y. Watanabe, T. Adachi, S. Igarashi, H. Someya, and N. Tani, “Rapid-cycling Power Supplies for the J-PARC RCS Sextupole Magnets”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO003, pp. 3338-3340.
- B. Mustapha, P. N. Ostroumov, and A. Perry, “Progress and Design Studies for the ATLAS Multi-User Upgrade”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 610-612.
- W. Herr, “MOPS - A Data Structure Management System for the LEP/SPS Control System”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1713-1716.
- F. Wang and C. Adolphsen, “Processing and Breakdown Localization Results for an L-Band Standing-Wave Cavity”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP017, pp. 2024-2026.
- Z. Li et al., “RDDS Cell Design and Optimization for the Linear Collider Linacs”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA41, pp. 3480-3482.
- Y. Morozumi, F. Furuta, T. Higo, T. Saeki, and K. Saito, “Revision of Accelerating and Damping Structures for KEK STF 45 MV/m Accelerator Modules”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THOAKI03, pp. 2575-2577.
- J. Claus, M. Cornacchia, and G. Parzen, “”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3552-3556.
- P. Emma, “Phase Slip in an Undulator with Pole and BPM Errors”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH116, pp. 2742-2744.
- F. Naito et al., “Beam Commissioning of the i-BNCT Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 760-762.
- E. A. Peralta, R. L. Byer, E. R. Colby, R. J. England, C. McGuinness, and K. Soong, “Fabrication and Measurement of Dual Layer Silica Grating Structures for Direct Laser Acceleration”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP096, pp. 280-282.
- T. Shishido, E. Kako, and S. Noguchi, “Development of Pre-tuning System for 972 MHz 9-Cell Superconducting Cavities”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP42, pp. 425-428.
- R. Brinkmann, O. Napoly, J. Payet, and N. Walker, “A New Beam Delivery System BDS for the TESLA Linear Collider”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP3B14, pp. 513-515.
- M. Chen, C. A. Cooper, and L. Ristori, “Multistep Mechanical Analyses of Centrifugal Barrel Polishing Barrel and Cavity”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO054, pp. 2426-2428.
- L. Liao, W. Fang, Q. Gu, M. Zhang, and M. H. Zhao, “Studying of Multipacting in Micro-pulse Electron Gun”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI045, pp. 383-385.
- L. Ristori et al., “Fabrication and Testing of SSR1 Resonators for PXIE”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO055, pp. 2429-2431.
- J. Y. Tang, “First Ever Ionization Cooling Demonstration in MICE”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 632-636.
- F. M?®ot, B. Autin, and A. Verdier, “A New Pion Collection System for the CERN Neutrino Factory”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI061, pp. 347-349.
- T. Morishita et al., “Fabrication of the New RFQ for the J-PARC Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD044, pp. 783-785.
- S. Wang et al., “Capture, Acceleration and Bunching RF Systems for the MEIC Booster and Storage Rings”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2318-2321.
- M. Meddahi et al., “CERN Neutrinos to Gran Sasso (CNGS): Results from Commissioning”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOAKI02, pp. 692-694.
- H. D. Zhang et al., “Beam Halo Measurements using Adaptive Masking Methods and Proposed Recent Halo Experiment”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP260, pp. 215-218.
- A. A. Glazov, “Commissioning of the JINR Phasotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper F-04, pp. 199-202.
- M. Tigner, “Bar Loaded Waveguide for Accelerator Service”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 249-251.
- S. Benedetti, A. Grudiev, and A. Latina, “Design of a 750 MHz IH Structure for Medical Applications”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 240-243.
- K. Saito et al., “Discovery of the Needless of Outgas Annealing after Horizontally Continuously Rotated Electropolishing with Niobium Superconducting RF Cavities”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP032, pp. 283-287.
- T. J. Roberts, M. A. C. Cummings, R. P. Johnson, and D. V. Neuffer, “MuSim, a Graphical User Interface for Multiple Simulation Programs”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1559-1561.
- D. V. Neuffer and Y. I. Alexahin, “Front End and HFOFO Snake for a Muon Facility”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper THYAUD02, pp. 150-154.
- R. Brinkmann, “A Simulation Study for the Beam-Beam Interaction of Protons with a Flat Electron Beam in HERA”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1720-1723.
- V. Vogel et al., “Operation of an L-band RF Gun with Pulses Inside the Burst Mode RF Pulse”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC111, pp. 3146-3148.
- G. V. Romanov, P. Berrutti, and T. N. Khabiboulline, “Simulation of Multipacting in SC Low Beta Cavities at FNAL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 579-581.
Back to search