JaCoW Logo

Reference Search

Favourites


For Word

[n]	C.-Y. Liao et al., “Beam Profiles Analysis for Beam Diagnostic Applications”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC146, pp. 1368-1370. 
[n]	S. Motonaga, J. Ohnishi, and H. Takebe, “Design of Magnets for the 8 GeV Storage Ring”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1125-1128. 
[n]	J. L. Navarro Quirante et al., “CALIFES: A Multi-Purpose Electron Beam for Accelerator Technology Tests”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP030, pp. 121-123. 
[n]	S. Sheynin, F. Lopez, and S. V. Milton, “The APS Direct-Drive Pulsed Septum Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP12, pp. 1355-1357. 
[n]	M. A. Gallilee et al., “Development of Aluminium Vacuum Chambers for the LHC Experiments at CERN”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2354-2356. doi:10.18429/JACoW-IPAC2014-WEPME040
[n]	A. Bertarelli et al., “High Energy Beam Impacts on Beam Intercepting Devices: Advanced Numerical Methods and Experimental Set-up”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS036, pp. 1614-1616. 
[n]	S. Onuma et al., “Development of Spill Control System for the J-PARC Slow Extraction”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP070, pp. 245-247. 
[n]	J.-F. Ostiguy and D. E. Johnson, “Three-Dimensional End Effects in Iron Septum Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP10, pp. 1349-1351. 
[n]	D. L. Rubin, “The Challenges of Ultra-low Emittance Damping Rings”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUYB02, pp. 956-960. 
[n]	V. Lazarev et al., “Technical Overview of the SIEMENS Particle Therapy Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS066, pp. 3577-3579. 
[n]	A. Bocci et al., “IR Photon Array Detector for Bunch by Bunch Transverse Beam Diagnostics”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB13, pp. 194-196. 
[n]	M. Hara, S. H. Be, H. Kamitsubo, R. Nagaoka, S. Sasaki, and T. Wada, “Storage Ring Design for STA SR Project”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 476-479. 
[n]	K. Tian, W. J. Corbett, X. Huang, and J. A. Safranek, “Low-Energy Intrabeam Scattering Measurements at the Spear3 Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 334-336. doi:10.18429/JACoW-IPAC2014-MOPRO104
[n]	H.-S. Kang, M.-H. Cho, J. H. Han, T.-H. Kang, I. S. Ko, and C. H. Yi, “Start to End Simulation of Three Bunch Compressor Lattice for PAL XFEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP062, pp. 1738-1740. 
[n]	W. M. Roach, D. Beringer, C. Clavero, R. A. Lukaszew, and C. E. Reece, “Investigation of Epitaxial Niobium Thin Films Grown on Different Surfaces Suitable for SRF Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO062, pp. 874-876. 
[n]	M. Vossberg, R. M. Brodhage, M. Kaiser, F. Maimone, W. Vinzenz, and S. Yaramyshev, “Design Studies for the Proton-Linac RFQ for FAIR”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3718-3720. doi:10.18429/JACoW-IPAC2015-THPF017
[n]	G. Bregliozzi, V. Baglin, J. M. Jimenez, G. Lanza, and T. Porcelli, “Saturation Behaviour of the LHC NEG Coated Beam Pipes”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD015, pp. 2525-2527. 
[n]	Y. Alexahin and D. V. Neuffer, “Design of Accumulator and Compressor Rings for the Project-X Based Proton Driver”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC043, pp. 1260-1262. 
[n]	L. Brunetti et al., “Vibration Stabilization for a Cantilever Magnet Prototype at the Subnanometer Scale”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC115, pp. 1335-1337. 
[n]	J. Johnson, R. Rimmer, and J. Corlett, “Computer Simulations of a Wide-Bandwidth Ferrite-Loaded High-Power Waveguide Termination”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR14, pp. 1818-1820. 
[n]	Y. Nakazawa et al., “Prototype of an Inter-digital H-mode Drift-tube Linac for Muon Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 180-183. doi:10.18429/JACoW-LINAC2018-MOPO085
[n]	U. Wienands, M. H. Donald, and M. E. Biagini, “Betatron-function Measurement in Lattices with 90?? Sections”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI003, pp. 1202-1204. 
[n]	W. Wittmer et al., “Online Modeling of the Rare Isotope Reaccelerator - ReA3”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3195-3197. doi:10.18429/JACoW-IPAC2014-THPRO129
[n]	R. Calaga, L. Ficcadenti, E. Métral, R. Tomas, J. Tuckmantel, and F. Zimmermann, “Proton-Beam Emittance Growth in SPS Coasts”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP007, pp. 3737-3739. 
[n]	C. H. Kuo et al., “Commissioning Tune Feedback in the Taiwan Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO016, pp. 517-519. 
[n]	G. Lanza, V. Baglin, G. Bregliozzi, and J. M. Jimenez, “LHC Beam Vacuum During 2011 Machine Operation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD018, pp. 2534-2536. 
[n]	N. Delerue et al., “High Flux Polarized Gamma Rays Production: First Measurements with a Four-mirror Cavity at the ATF”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPO002, pp. 1446-1448. 
[n]	Y. Sue et al., “A Bunch Structure Measurement of Muons Accelerated by RFQ Using a Longitudinal Beam-Profile Monitor With High Time Resolution”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 37-40. doi:10.18429/JACoW-IPAC2019-MOZZPLM2
[n]	R. L. Geng et al., “RD on the Niobium-Copper Superconducting Cavity at Peking University”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOP013, pp. 70-73. 
[n]	M. Masuzawa et al., “SuperKEKB Main Ring Magnet System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3778-3781. doi:10.18429/JACoW-IPAC2016-THPOR006
[n]	X. Yang, X. Huang, and J. A. Safranek, “LOCO Application to NSLS2 SR Dispersion and Beta Beating Correction”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1989-1992. doi:10.18429/JACoW-IPAC2015-TUPHA012
[n]	H. Iijima, M. Kuriki, and Y. M. Masumoto, “Surface Analysis of a Degraded NEA-GaAs Photocathode by Temperature Programmed Desorption Technique”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC116, pp. 3158-3160. 
[n]	G. Valentino et al., “Modeling and Simulation of LHC Beam-Based Collimator Setup”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR097, pp. 2059-2061. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search