JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. C. Ribes and G. Delaunay, “TUC01.pdf”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUC01, pp. 488-490. 
[n]	M. I. Green, B. Gee, S. Marks, J. Meneghetti, D. Nelson, and W. Wong, “Design, Fabrication, and Calibration of Curved Integral Coils for Measuring Transfer Function, Uniformity and Effective Length of LBL ALS Booster Dipole Magnets”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1972-1975. 
[n]	D. G. Myakishev and B. N. Sukhina, “Calcultion of the Gun and Collector for Electron Cooling System EX35 and EX300”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2B03, pp. 1384-1386. 
[n]	G. Lawler et al., “Reduction of dark current at cryogenic temperatures in a high gradient photogun”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 523-526. doi:10.18429/JACoW-IPAC2024-MOPR31
[n]	Y. Kalboussi et al., “Material Engineering of ALD- Deposited Multilayer to Improve the Superconducting Performances of RF Cavities Under Intense RF Fields”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper FROFDV07, pp.. 
[n]	L. N. Arapov et al., “High Power Sources for VLEPP”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper WE2-03, pp. 643-646. 
[n]	N. Montanez, G. Lawler, N. Majernik, and J. Rosenzweig, “Novel Fabrication Methods and Geometries of Nanoblade Cathodes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1622-1624. doi:10.18429/JACoW-IPAC2023-TUPA142
[n]	M. Baschke, H. Podlech, and A. Schempp, “A Two-Stage Splitring-RFQ for High Current Ion Beams at Low Frequencies”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 941-942. doi:10.18429/JACoW-IPAC2018-TUPAF087
[n]	G. Jug and A. Kosicek, “Libera LLRF - Development and Tests”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA054, pp. 1455-1457. 
[n]	M. J. Barnes and G. D. Wait, “Comparison of Measured and Predicted Inductance per Cell for a Travelling Wave Kicker Magnet”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP118G, pp. 2588-2590. 
[n]	L. Dietl, K. Rieger, and U. Trinks, “Lead Alloys for Superconducting Cavities”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3605-3607. 
[n]	H. Zimmermann, U. Bartz, N. Mueller, A. Schempp, and J. Thibus, “The Frankfurt Funneling Experiment”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT032, pp. 1213-1215. 
[n]	H. D. Glass et al., “Permanent Dipole Magnets for the 8 GeV Transfer Line at FNAL”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P012, pp. 3257-3259. 
[n]	J. S. Schmidt, B. Koubek, and A. Schempp, “Field Optimized 4-rod RFQ Model”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3238-3240. doi:10.18429/JACoW-IPAC2014-THPME013
[n]	J. Cardona, D. Abell, and S. Peggs, “Studies on Sextupole Components Generated by Eddy Currents in the Rapid Cycling Medical Synchrotron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG023, pp. 1059-1061. 
[n]	M. Yadav, O. Apsimon, C. E. Hansel, J. B. Rosenzweig, and C. P. Welsch, “Ion Motion in Flat Beam Plasma Accelerators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 521-523. doi:10.18429/JACoW-IPAC2021-MOPAB149
[n]	F. Bosco et al., “Wakefield studies for an ultra compact X-rays free electron laser”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPS48, unpublished. 
[n]	A. Dixon, T. K. Charles, S. Thorin, and P. H. Williams, “Preserving Bright Electron Beams: Distorted CSR Kicks”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 91-94. doi:10.18429/JACoW-LINAC2022-MOPOPA12
[n]	N. D. Topilin, “MPD Yoke Assemby Status”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper WEB04, unpublished. 
[n]	C. R. Ader, M. L. Alvarez, J. S. Batko, R. Campos, M. W. McGee, and A. C. Watts, “Accelerator Vacuum Windows: A Review of Past Research and a Strategy for the Development of a New Design for Improved Safety and Longevity for Particle Accelerators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2237-2239. doi:10.18429/JACoW-IPAC2019-WEXXPLS2
[n]	A. V. Rauchas, “Synchronization of the Zero Gradient Synchrotron (ZGS) and the Fast-Cycling Booster II Injector”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1414-1417. 
[n]	C. Davut, O. Apsimon, P. Karataev, T. Lef?¿vre, S. Mazzoni, and G. X. Xia, “Analytical and Numerical Characterization of Cherenkov Diffraction Radiation as a Longitudinal Electron Bunch Profile Monitor for AWAKE Run 2”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4355-4358. doi:10.18429/JACoW-IPAC2021-THPAB284
[n]	G. D. Wait, M. J. Barnes, K. D. Metzmacher, and L. Sermeus, “The Application of Saturating Inductors for Improving the Performance of the CERN PS Kicker Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P100, pp. 1328-1330. 
[n]	G. R. Rovigatti de Oliveira, H. Geraissate, and R. Junqueira Leao, “Alignment Strategies and First Results on Sirius Beamlines”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 349. doi:10.18429/JACoW-MEDSI2020-THOA03
[n]	T. N. Khabiboulline et al., “Update of Beam Optics and SRF Cavities for Project X”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO092, pp. 3975-3977. 
[n]	S. Hirlaender et al., “Towards few-shot reinforcement learning in particle accelerator control”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1804-1807. doi:10.18429/JACoW-IPAC2024-TUPS60
[n]	Y. Kamiya, A. Araki, M. Katoh, and M. Kihara, “Low Emittance Optics of Photon Factory Storage Ring at KEK”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 455-458. 
[n]	C. Z. Antoine, “A Statistical Analysis of the Risk of Dust Contamination During Assembly of RF Superconducting Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I47, pp. XX-XX. 
[n]	S. G. Arutunian et al., “Magnetic Field Distribution Measurement by Vibrating Wire Strain Gauge”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA167, pp. 1468-1470. 
[n]	Ya. S. Derbenev et al., “The Status of Electron Cooling at Novosibirsk (Theory and Experiment)”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2672-2677. 
[n]	J. M. Bogaty, “A Fast Technique of Measuring Equilibrium Orbit Warps in the Zero Gradient Synchrotron (ZGS) at Injection”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 610-613. 
[n]	F. Lin, H. Huang, A. U. Luccio, and T. Roser, “Simulations on the AGS Horizontal Tune Jump Mechanism”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP017, pp. 3735-3737. 
[n]	S. Dat?® et al., “Operation Status of the SPring-8 Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A05, pp. 672-674. 
[n]	A. I. Drozhdin, O. E. Krivosheev, and N. V. Mokhov, “Beam Loss and Collimation in the Fermilab 16 GeV Proton Driver”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH054, pp. 2572-2574. 
[n]	A. V. Aleksandrov et al., “Measurement of the Longitudinal Coupling Impedances using Short Electron Bunch”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP005G, pp. 1007-1008. 
[n]	G. V. Dolbilov et al., “Design of 135 MW X-Band Relativistic Klystron for Linear Collider”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P023, pp. 3126-3128. 
[n]	M. J. Barnes and G. D. Wait, “A FET Based Mass Separator Kicker for TRIUMF ISAC Project”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5B13, pp. 2376-2378. 
[n]	S. Levenson et al., “First demonstration of spin-polarized electrons from gallium nitride photocathodes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1335-1338. doi:10.18429/JACoW-IPAC2023-TUODB3
[n]	T. A. Antaya, J. A. Kuchar, and M. L. Mallory, “Operating Experience with an Ion Source in a Superconducting Cyclotron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2716-2719. 
[n]	C. Adolphsen et al., “The Next Linear Collider Machine Protection System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUDR4, pp. 253-255. 
[n]	J. W. Stetson, “A Method of Tuning ECRIS Beam Transport Lines for Low Emittance”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper THCO-A03, pp. 208-212. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search