Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] I. Podadera et al., “Manufacturing, Assembly and Tests of the LIPAc Medium Energy Beam Transport Line (MEBT)”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 554-557. doi:10.18429/JACoW-LINAC2016-TUPLR041
[n] B. L. Cohen, “Selection of Magnet Configuration for the ORIC”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A05, pp. 15-17.
[n] R. L. Brown et al., “Resonance Control for the Coupled Cavity Linac and Drift Tube Linac Structures of the Spallation Neutron Source Linac Using a Closed-Loop Water Cooling System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH095, pp. 1429-1431.
[n] C. David, J. Jacob, A. Panzarella, J.-P. Perrine, and J.-L. Revol, “Commissioning of the Third RF Acceleration Unit for the ESRF Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02C, pp. 1755-1757.
[n] R. Li and R. L. Gluckstern, “Cavity Height Dependence of the Longitudinal Impedance for a Pillbox Cavity at High Frequency”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-52, pp. 755-757.
[n] L. Maunoury et al., “SPIRAL1 Charge Breeder: Performances and Status”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 35-38. doi:10.18429/JACoW-ECRIS2016-MOFO01
[n] W. B. Powell, “The University of Birmingham Radial-Ridge Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A04, pp. 12-14.
[n] N. Pichoff et al., “The SARAF-LINAC project July 2024 status”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 615-617. doi:10.18429/JACoW-LINAC2024-THAA007
[n] N. M. King, “Spiral Ridge Studies at the University of Florida”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A06, pp. 18-23.
[n] T. A. Welton, “Session V Introductory Comments”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59E01, pp. 223-223.
[n] J. W. Johnson, “Developments in Gridded Ion Lenses”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 765-769.
[n] P. vom Stein, M. Peiniger, M. Pekeler, C. Piel, and H. Vogel, “RF Activities on Cavities and Turn Key Accelerator Systems at ACCEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH092, pp. 984-986.
[n] D. Holmes, “Tevatron Performance Goals for the Coming Decade”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MODL1, pp. 43-47.
[n] T. A. Welton, “Computer Codes for Cyclotron Orbit Calculations”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A11, pp. 48-54.
[n] D. L. Judd, “Session I Summary”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A01, pp. XX-XX.
[n] R. Li, “CSR Interaction for a 2D Energy-Chirped Bunch on a General Orbit”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP048, pp. 4417-4417.
[n] A. Castilla et al., “First RF Performance Results for the DQW Crab Cavities to be Tested in the CERN SPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1077-1080. doi:10.18429/JACoW-IPAC2017-MOPVA095
[n] J. S. Kim, I. N. Bogatu, B. Cluggish, S. Galkin, L. Grubert, and L. Zhao, “Far-Tech's ECR Charge Breeder Optimization Simulation Toolset - MCBC, GEM, and IonEx”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper TUCO-C04, pp. 156-159.
[n] I. Gertz, A. Abramson, I. Mardor, A. Perry, C. Piel, and L. Weissman, “Present Status of SARAF Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP109, pp. 334-336.
[n] J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1554-1557.
[n] M. A. Hein, “Potential of High-Temperature Superconductors for Short-Term Microwave Applications”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95L01, pp. 267-309.
[n] R. E. Worsham et al., “A 4-MeV Experimental Separated-Orbit Cyclotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 760-764.
[n] F. Lemagnen et al., “Production Of Metallic Stable Ion Beams For GANIL And SPIRAL2”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper MOPPH002, pp. 45-48.
[n] L. Zhao, E. G. Evstati, J. S. Kim, E. N. Beebe, and A. I. Pikin, “Simulation of Electron and Ion Dynamics in an EBIS”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper PO17, pp. 97-100.
For LaTeX
Use Complete Form
For BibTeX
References
- I. Podadera et al., “Manufacturing, Assembly and Tests of the LIPAc Medium Energy Beam Transport Line (MEBT)”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 554-557.
- B. L. Cohen, “Selection of Magnet Configuration for the ORIC”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A05, pp. 15-17.
- R. L. Brown et al., “Resonance Control for the Coupled Cavity Linac and Drift Tube Linac Structures of the Spallation Neutron Source Linac Using a Closed-Loop Water Cooling System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH095, pp. 1429-1431.
- C. David, J. Jacob, A. Panzarella, J.-P. Perrine, and J.-L. Revol, “Commissioning of the Third RF Acceleration Unit for the ESRF Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02C, pp. 1755-1757.
- R. Li and R. L. Gluckstern, “Cavity Height Dependence of the Longitudinal Impedance for a Pillbox Cavity at High Frequency”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-52, pp. 755-757.
- L. Maunoury et al., “SPIRAL1 Charge Breeder: Performances and Status”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 35-38.
- W. B. Powell, “The University of Birmingham Radial-Ridge Cyclotron”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A04, pp. 12-14.
- N. Pichoff et al., “The SARAF-LINAC project July 2024 status”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 615-617.
- N. M. King, “Spiral Ridge Studies at the University of Florida”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A06, pp. 18-23.
- T. A. Welton, “Session V Introductory Comments”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59E01, pp. 223-223.
- J. W. Johnson, “Developments in Gridded Ion Lenses”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 765-769.
- P. vom Stein, M. Peiniger, M. Pekeler, C. Piel, and H. Vogel, “RF Activities on Cavities and Turn Key Accelerator Systems at ACCEL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH092, pp. 984-986.
- D. Holmes, “Tevatron Performance Goals for the Coming Decade”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MODL1, pp. 43-47.
- T. A. Welton, “Computer Codes for Cyclotron Orbit Calculations”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A11, pp. 48-54.
- D. L. Judd, “Session I Summary”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A01, pp. XX-XX.
- R. Li, “CSR Interaction for a 2D Energy-Chirped Bunch on a General Orbit”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP048, pp. 4417-4417.
- A. Castilla et al., “First RF Performance Results for the DQW Crab Cavities to be Tested in the CERN SPS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1077-1080.
- J. S. Kim, I. N. Bogatu, B. Cluggish, S. Galkin, L. Grubert, and L. Zhao, “Far-Tech's ECR Charge Breeder Optimization Simulation Toolset - MCBC, GEM, and IonEx”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper TUCO-C04, pp. 156-159.
- I. Gertz, A. Abramson, I. Mardor, A. Perry, C. Piel, and L. Weissman, “Present Status of SARAF Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP109, pp. 334-336.
- J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1554-1557.
- M. A. Hein, “Potential of High-Temperature Superconductors for Short-Term Microwave Applications”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95L01, pp. 267-309.
- R. E. Worsham et al., “A 4-MeV Experimental Separated-Orbit Cyclotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 760-764.
- F. Lemagnen et al., “Production Of Metallic Stable Ion Beams For GANIL And SPIRAL2”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper MOPPH002, pp. 45-48.
- L. Zhao, E. G. Evstati, J. S. Kim, E. N. Beebe, and A. I. Pikin, “Simulation of Electron and Ion Dynamics in an EBIS”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper PO17, pp. 97-100.
Back to search